<?xml version="1.0" encoding="UTF-8"?>
<otherdata xmlns="http://linux.duke.edu/metadata/other" packages="46"><package pkgid="e256ab17e6f9420eac671896788479840c43da473c92779b45fbe8d0b0b68c51" name="build-mkbaselibs" arch="i586">
    <version epoch="1" ver="20150115" rel="5.4"/>

<changelog author="adrian@suse.de" date="1298980800">- support new cross build initvm. Done by James Perkins from LinuxFoundation
- do not use loop device anymore when using block devices directly</changelog>
<changelog author="lnussel@suse.de" date="1301400000">- make sure default.conf is no stale symlink</changelog>
<changelog author="adrian@suse.de" date="1302868800">- switch back to single process build for debian to be conform with
  their policy
- use cpuid kvm64 on kvm for 64bit as workaround for a cpuid bug</changelog>
<changelog author="adrian@suse.de" date="1303905600">- revert to single cpu build default for debian packages</changelog>
<changelog author="adrian@suse.de" date="1305201600">- conflict with old bsdtar (not supporting --chroot)</changelog>
<changelog author="adrian@suse.de" date="1306324800">- allow to use simple spec file parser via Build::show</changelog>
<changelog author="adrian@suse.de" date="1307361600">- do not build ia64 baselibs packages for openSUSE anymore</changelog>
<changelog author="adrian@suse.de" date="1308312000">- support new kiwi command line mode</changelog>
<changelog author="adrian@suse.de" date="1309435200">- fixed kiwi execution call for some versions</changelog>
<changelog author="adrian@suse.de" date="1309521600">- compat mode for broken kiwi of openSUSE 11.4</changelog>
<changelog author="opensuse@cboltz.de" date="1312718400">- Requires:/Recommends: were part of the package description.
  Moved them to the correct place.</changelog>
<changelog author="adrian@suse.de" date="1317038400">- fixing kvm cpuid setting for AMD and Intel CPU's
- support new xen tools
- fixed qemu build initialisation</changelog>
<changelog author="adrian@suse.de" date="1317729600">- use new qemu-*-binfmt handler to run commands with correct $0
- fix build for Factory</changelog>
<changelog author="mls@suse.de" date="1318248000">- add sles11sp2 build config and adapt autodetection [bnc#711770]</changelog>
<changelog author="adrian@suse.de" date="1319544000">- use github.com as git repo now
- fix build for rpmv5</changelog>
<changelog author="adrian@suse.de" date="1329134400">- Support for openSUSE 12.2 (current factory)
- Support for crossbuild via Hostarch directive
- PPC KVM support
- swap space gets taken into account for ulimits
- Failure on not supported personality set</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1338638400">- https repo support
- clean up print info
- Refine-download-preinstall-install-progress-info</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1340193600">- bump to a new higher version to get this updated always
- clean up .src.cache file if --clean option specified</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1344686400">- update to version 2012.08.10</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1347364800">- update to version 2012.09.11</changelog>

</package>
<package pkgid="978676fecd20e7b8dd6edd1420c4688d110b618703649ac1480596cf9e93e69b" name="build-initvm-i586" arch="i586">
    <version epoch="1" ver="20150115" rel="5.4"/>

<changelog author="adrian@suse.de" date="1298980800">- support new cross build initvm. Done by James Perkins from LinuxFoundation
- do not use loop device anymore when using block devices directly</changelog>
<changelog author="lnussel@suse.de" date="1301400000">- make sure default.conf is no stale symlink</changelog>
<changelog author="adrian@suse.de" date="1302868800">- switch back to single process build for debian to be conform with
  their policy
- use cpuid kvm64 on kvm for 64bit as workaround for a cpuid bug</changelog>
<changelog author="adrian@suse.de" date="1303905600">- revert to single cpu build default for debian packages</changelog>
<changelog author="adrian@suse.de" date="1305201600">- conflict with old bsdtar (not supporting --chroot)</changelog>
<changelog author="adrian@suse.de" date="1306324800">- allow to use simple spec file parser via Build::show</changelog>
<changelog author="adrian@suse.de" date="1307361600">- do not build ia64 baselibs packages for openSUSE anymore</changelog>
<changelog author="adrian@suse.de" date="1308312000">- support new kiwi command line mode</changelog>
<changelog author="adrian@suse.de" date="1309435200">- fixed kiwi execution call for some versions</changelog>
<changelog author="adrian@suse.de" date="1309521600">- compat mode for broken kiwi of openSUSE 11.4</changelog>
<changelog author="opensuse@cboltz.de" date="1312718400">- Requires:/Recommends: were part of the package description.
  Moved them to the correct place.</changelog>
<changelog author="adrian@suse.de" date="1317038400">- fixing kvm cpuid setting for AMD and Intel CPU's
- support new xen tools
- fixed qemu build initialisation</changelog>
<changelog author="adrian@suse.de" date="1317729600">- use new qemu-*-binfmt handler to run commands with correct $0
- fix build for Factory</changelog>
<changelog author="mls@suse.de" date="1318248000">- add sles11sp2 build config and adapt autodetection [bnc#711770]</changelog>
<changelog author="adrian@suse.de" date="1319544000">- use github.com as git repo now
- fix build for rpmv5</changelog>
<changelog author="adrian@suse.de" date="1329134400">- Support for openSUSE 12.2 (current factory)
- Support for crossbuild via Hostarch directive
- PPC KVM support
- swap space gets taken into account for ulimits
- Failure on not supported personality set</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1338638400">- https repo support
- clean up print info
- Refine-download-preinstall-install-progress-info</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1340193600">- bump to a new higher version to get this updated always
- clean up .src.cache file if --clean option specified</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1344686400">- update to version 2012.08.10</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1347364800">- update to version 2012.09.11</changelog>

</package>
<package pkgid="2fe2de9c79de6500f05caf0259bf7ae14ad54a5a89d7d521f332ac624e058c25" name="qemu-arm-static" arch="i586">
    <version epoch="0" ver="1.6.0rc3" rel="5.1"/>

</package>
<package pkgid="a7215dfc347c4296ced8acce03b2c23b802e59d1552a068379e9071dc9638fde" name="depanneur" arch="i586">
    <version epoch="0" ver="0.15" rel="4.1"/>

<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.1" date="1347364800">- first version of depanneur, including the following features:
  * dependency build wit correct dependendcy order
  * parallel build with customized threads pool
  * full build to specify a top dir of all packages tree
  * support generate local repo once build finished</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.2" date="1351080000">- fix getlogin() fail issue on some system
- add function worker_thread() to clean up build worker in one place
- refine incremental build, don't need force running gbs in top git dir
- support multiple spec files building in one package.
- fix Ctrl + C issue:
  - if one package build for a long time(&gt;15 mins), sudo req passwd again
  - sudo timeout issue, which will result in endless loop
- expand ~ in TIZEN_BUILD_ROOT, to fix create dir fail issue
- collect export error packages &amp; report, and return None 0 if any error occur
- support building one spec file for --spec option used in gbs build
- refine error report in depanneur. Three types of error: export error,
  expansion error and rpmbuild error, detail expansion info and build log are
  attached behind packages.
- dependency circle check: if circle found from package dependency, the circle
  link is printed and exit. currently, we don't support circle building.
  - break expand_deps into two functions: one is refresh_repo(), which is
    used to update %repo, which store repodata info, including 'provide' and
    'depend' info, and another fuction is expand_deps().
  - Add get_deps() to get direct dependency of specified package(specfile).
  - Using Depth-first search algorithrm to try to find circle
- use bsd_glob to replace glob to fix thread crash issue in openSUSE 12.2
  (perl 5.16)
- add --debug option for 'gbs export' if --debug specified
- Code cleanup
  - fix perlcritic's warning
  - remove useless sub wanted
  - remove useless variables in git_wantted
  - remove trailing spaces</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.2.1" date="1352721600">- Update dependency: depend on tizen-build &gt;= 2012.10.10.1</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.3" date="1353931200">- --noinit support
- Support build RPM packages for incremental build
- warning user and try again if umount failed for incremental build
- no need create/unpack tar ball for incremental build
- x86_64 support
- keep src rpm for each arch
- show build progress for multiple packages build
- Add --spec to support multi-spec project
- Add --define option to define macros for rpmbuild
- Modify SUDOV_PERIOD smaller (5 mins)
- Add more output info about building status
- Add --keep-packs to keep unused packages in buildroot</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.4" date="1358942400">- Refine build behavior: gbs build should not depend on local copy
- Use --target option for build script to build specified arch
- add depanneur_sudo and sudoers configure to avoid requesting passwd
- use the processors number instead of hard code 4 for parallel compile
- show package info for arch incompatible warning
- Add --no-patch-export option for source export
- supported arches clean up
- bug fix:
  - crash if specify a non-exist specfile with --spec option</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.5" date="1361448000">- Add --binary-from-file option to specify a package list file
- Change --binary-list option, accept a packages list separated by comma(,).
- Add --deps to build specified packages and all packages they depend
- Add --rdeps to build specified packages and all packages depend on them</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.6" date="1364212800">- fix createrepo option usage issue
- depend on new version of obs-build-2013.03.11
- depend on createrepo 0.9.9 for deltarpm support</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.7" date="1368532800">- avoid export multiple times for packages contails multiple spec files
- put all build roots in a individual directory, which can be mounted as tmpfs
  to speed up building
- Add statistical of each errors, including export/expansion/rpmbuild errors
- refine createrepo: add --update for if repodata already exists
- bug fix:
  - prereqs involved for dependency resolving
  - fix wrong @deps which contain version info
  - quote metacharacters in pattern to fix strip issue if metacharacters exist</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.8" date="1372680000">- create debug package by default
- refinement:
  - report circle in time
  - load dependency data during refresh repo, instead of during parsing every
    spec file
- bug fix:
  - get target arch from build conf if 'Target' is set in build config, which
    make gbs and remote obs generate the same arch for final RPM package
  - exit unexpectedly if circle exist
  - using higer version in different repo</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.9" date="1377000000">- Define the de-facto %opensuse_bs macro from OBS to be zero</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.10" date="1381924800">- Remove hard code of _rpmdir in build root, use chroot to detect instead
- Support comments (#) in binary-list file for --binary-from-file option
- Remove previous built rpm and srpm if new version has been built out</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.11" date="1386676800">- depend on latest build-20131112
- generate html report automatically
- refine build report summary:
  - add build log dir
  - always print the dirs of final build files
  - add succeeded packages number
- depend on initvm to register qemu handler
- add arm 64(aarch64) support</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.12" date="1394193600">- Fix export failed if packaging dir is symblic
- depend on new version build to fix binfmt handlers register issue
- Return error if arch is not compatible for build</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.13" date="1400673600">- Add a new --spec-commit option to support new orphan-packaging
  development model
- Add group metadata to local repodata if package-groups.rpm exists</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.13.1" date="1402574400">- ignore already finished packages for dependency resolving
- ignore already skipped packages for dependency resolving
- add gbs version infor in final build report
- depend on new obs-build to fix qemu arch64 issue</changelog>
<changelog author="Li Jinjing &lt;jinjingx.li@intel.com&gt; 0.14" date="1413374400">- fix build with --include-all on development branch(orphan-packaging mode)
- support --fallback-to-native option of gbs
- support --icecream option of gbs
- support new arch mips and mipsel for gbs
- support --skip-srcrpm option of gbs
- fix leaking of temporary files
- add rpm changelog
- add comments for core builder code</changelog>
<changelog author=".zhang@samsung.com&gt; 0.15" date="1457092800">- add --fail-fast option of gbs
- fix CentOS 7 require</changelog>

</package>
<package pkgid="0145742f5a6382b86b3260c2e47e7985bc2c4e33d02eb35a8f1e958928cf29de" name="librpm-tizen" arch="i586">
    <version epoch="0" ver="4.11.0.1.tizen20140530" rel="5.1"/>

<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 4.10.91.tizen20121215" date="1361448000">- packaging: Drop bdb sources
- packaging: fix build for Fedora (18)
- packaging: disable autoprov</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 4.10.91.tizen20121215" date="1361534400">- packaging: fix build for CentOS</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 4.10.91.tizen20121215" date="1361793600">- packaging: Disable autoreq, too
- Ignore unknown internal scripts</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 4.10.91.tizen20121215" date="1361966400">- Enable lua
- update package Provide info
- Add a provide tag to make gbs depend on new changes
- packaging: fix Makefile
- Install Tizen macros</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 4.11.0.1.tizen20130304" date="1362657600">- Version bump to latest from Tizen</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 4.11.0.1.tizen20130618" date="1371556800">- Version bump to latest from Tizen 3.0</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 4.11.0.1.tizen20130618" date="1377086400">- fix segmentation fault error while parsing spec
- Bump the log level of "unexpanded script" msg
- Prevent execution of arbitrary scripts</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 4.11.0.1.tizen20130618" date="1380628800">- lua: fall through failed lua scripts
- lua: Enable Lua
- Ignore bad expressions in %if conditionals</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen-tools/4.11.0.1.tizen20130618-20140306" date="1394107200">- Fix build against Lua 5.2</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen-tools/4.11.0.1.tizen20140530-20140723" date="1406116800">- Rebase on latest Tizen 3.0
- packaging: enable lua 5.2 for openSUSE
- rpm-packaging: enable customized autoreq</changelog>

</package>
<package pkgid="75f9235decfb025ce27e116829e57c7a7d0a407225d7f44b1edf482dcc6d9e1d" name="perl-Crypt-SSLeay" arch="i586">
    <version epoch="0" ver="0.64" rel="1.1"/>

<changelog author="Fedora Release Engineering &lt;rel-eng@lists.fedoraproject.org&gt; - 0.57-12" date="1248523200">- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild</changelog>
<changelog author="Tomas Mraz &lt;tmraz@redhat.com&gt; - 0.57-13" date="1250856000">- rebuilt with new openssl</changelog>
<changelog author="Marcela Ma?lá?ová &lt;mmaslano@redhat.com&gt; - 0.57-14" date="1259150400">- change Makefile for openssl 1.0, which couldn't be found properly before</changelog>
<changelog author="Stepan Kasal &lt;skasal@redhat.com&gt; - 0.57-16" date="1260187200">- rebuild against perl 5.10.1</changelog>
<changelog author="Marcela Maslanova &lt;mmaslano@redhat.com&gt; - 0.57-17" date="1272628800">- Mass rebuild with perl-5.12.0</changelog>
<changelog author="Petr Sabata &lt;psabata@redhat.com&gt; - 0.58-1" date="1283342400">- New upstream release, v0.58
- removing perl-Crypt-SSLeay-0.57-live-tests.patch, fixed in upstream
- removing perl-Crypt-SSLeay-Makefile_ssl1.patch, fixed in upstream</changelog>
<changelog author="Marcela Maslanova &lt;mmaslano@redhat.com&gt; - 0.58-2" date="1292500800">- Rebuild to fix problems with vendorarch/lib (#661697)</changelog>
<changelog author="Fedora Release Engineering &lt;rel-eng@lists.fedoraproject.org&gt; - 0.58-3" date="1297166400">- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild</changelog>
<changelog author="Paul Howarth &lt;paul@city-fan.org&gt; - 0.58-4" date="1303214400">- Remove buildroot specification and cleaning, not needed for modern rpmbuild
- Use %{?perl_default_filter}
- Filter the perl(DB) provide in a way that works with rpm &gt;= 4.9
- Use DESTDIR rather than PERL_INSTALL_ROOT
- Fix line endings on documentation
- Fix upstream source URL
- Fix argument order for find with -depth</changelog>
<changelog author="Petr Sabata &lt;contyk@redhat.com&gt; - 0.58-5" date="1311163200">- Perl mass rebuild</changelog>
<changelog author="Petr Pisar &lt;ppisar@redhat.com&gt; - 0.58-6" date="1311336000">- RPM 4.9 dependency filtering added</changelog>
<changelog author="Petr Sabata &lt;contyk@redhat.com&gt; - 0.58-7" date="1315396800">- Link to the ca-certificates ca-bundle.crt instead of shipping our own,
  outdated copy (#734385)</changelog>
<changelog author="Fedora Release Engineering &lt;rel-eng@lists.fedoraproject.org&gt; - 0.58-8" date="1326456000">- Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild</changelog>

</package>
<package pkgid="4f973501acecd039d0b9be3467939a86f2a60aa61b99c889f6bdad6583713ab5" name="lthor" arch="i586">
    <version epoch="0" ver="1.4" rel="3.1"/>

<changelog author="eduard.bartosh@intel.com" date="1352203200">- Initial packaging</changelog>

</package>
<package pkgid="ca1935eb239dc72ba0741ee3f0fd83e770f139814860a60c3d32dbb546d06080" name="build-mkdrpms" arch="i586">
    <version epoch="1" ver="20150115" rel="5.4"/>

<changelog author="adrian@suse.de" date="1298980800">- support new cross build initvm. Done by James Perkins from LinuxFoundation
- do not use loop device anymore when using block devices directly</changelog>
<changelog author="lnussel@suse.de" date="1301400000">- make sure default.conf is no stale symlink</changelog>
<changelog author="adrian@suse.de" date="1302868800">- switch back to single process build for debian to be conform with
  their policy
- use cpuid kvm64 on kvm for 64bit as workaround for a cpuid bug</changelog>
<changelog author="adrian@suse.de" date="1303905600">- revert to single cpu build default for debian packages</changelog>
<changelog author="adrian@suse.de" date="1305201600">- conflict with old bsdtar (not supporting --chroot)</changelog>
<changelog author="adrian@suse.de" date="1306324800">- allow to use simple spec file parser via Build::show</changelog>
<changelog author="adrian@suse.de" date="1307361600">- do not build ia64 baselibs packages for openSUSE anymore</changelog>
<changelog author="adrian@suse.de" date="1308312000">- support new kiwi command line mode</changelog>
<changelog author="adrian@suse.de" date="1309435200">- fixed kiwi execution call for some versions</changelog>
<changelog author="adrian@suse.de" date="1309521600">- compat mode for broken kiwi of openSUSE 11.4</changelog>
<changelog author="opensuse@cboltz.de" date="1312718400">- Requires:/Recommends: were part of the package description.
  Moved them to the correct place.</changelog>
<changelog author="adrian@suse.de" date="1317038400">- fixing kvm cpuid setting for AMD and Intel CPU's
- support new xen tools
- fixed qemu build initialisation</changelog>
<changelog author="adrian@suse.de" date="1317729600">- use new qemu-*-binfmt handler to run commands with correct $0
- fix build for Factory</changelog>
<changelog author="mls@suse.de" date="1318248000">- add sles11sp2 build config and adapt autodetection [bnc#711770]</changelog>
<changelog author="adrian@suse.de" date="1319544000">- use github.com as git repo now
- fix build for rpmv5</changelog>
<changelog author="adrian@suse.de" date="1329134400">- Support for openSUSE 12.2 (current factory)
- Support for crossbuild via Hostarch directive
- PPC KVM support
- swap space gets taken into account for ulimits
- Failure on not supported personality set</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1338638400">- https repo support
- clean up print info
- Refine-download-preinstall-install-progress-info</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1340193600">- bump to a new higher version to get this updated always
- clean up .src.cache file if --clean option specified</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1344686400">- update to version 2012.08.10</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1347364800">- update to version 2012.09.11</changelog>

</package>
<package pkgid="ec39d17bc8b3d0de61dbf80e418487be39ef3570c43156d78c7ddeba5811434a" name="python-jenkinsapi" arch="i586">
    <version epoch="0" ver="0.2.26" rel="5.1"/>

<changelog author="Ed Bartosh &lt;eduard.bartosh@intel.com&gt; 0.2.20" date="1391169600">- Packaging is taken from OpenSUSE</changelog>
<changelog author="Ed Bartosh &lt;ed@ed.fi.intel.com&gt; 0.2.26" date="1422705600">- Only process non empty actions while getting job parameters
- Add support for Job Folders (CloudBees Folders Plugin).
- Fix tests.
- get_build_triggerurl logic fix
- job.get_build_triggerurl update
- making change more pythonic
- Addressing issue/221 - changing depth=1
- Added Aleksey to primary authors list
- Version bump
- added documentation about getting version info
- move the stuff out of readme
- Added note about experimental nature of this branch
- Added Python 3.3 to this branch build spec
- Added build for Python 2.6
- Tying to fix P3 incompatibility
- Fix wrong translation of 'except' from python2 to pytho3
- Use print() (with 'from __future__ import print_function')
- urllib compatibility
- exception.message -&gt; str(exception)
- basestring, unicode, str compatibility
- iteritems -&gt; items Queue -&gt; queue
- resolve_job_folders skipping jobs fix
- Changed Jenkins URL to download LTS version
- add unit test for multiple top level folders
- Changed Jenkins URL to download LTS version
- Added conversions from bytes to strings
- polling jenkins each time Jobs is initialized
- Add support to create Jenkins object without immediately polling jobs.
- minor fix to exception messages to improve readability.
- Adapt fingerprint to catch HTTPError from requests
- Add a few Jenkins API usage examples
- Fixed pylint violations
- Simplified get_job_url function
- Add support to create Jenkins object without immediately polling jobs.
- minor fix to exception messages to improve readability.
- Adapt fingerprint to catch HTTPError from requests
- Fixed pylint violations
- Simplified get_job_url function
- Small changes in jobs classes
- Formatting fixes
- Add test to verify fetching of plugin details,
- Fix for issue #268 and unit tests for it
- Fixed incorrect merge
- Set to use unittest2 library instead of unittest
- Added unittest2 so travis can run tests with recent Python
- Set unitest2 to be used only on python 2.6
- Added support for 'del' in Jenkins object: remove job
- Added small delay for test_parametrized_build
- Added re-try when removing job
- Added support for 'del' in Jenkins object: remove job
- Added small delay for test_parametrized_build
- Added re-try when removing job
- Removed paragraph about Python 3 branch
- fixes job invoke when no build parameters exist for a particular job
- Fixed most of the unit tests to work on all python versions
- Fixed md5 calculation
- build.get_console() now returns string in all python versions
- Fixed assertion renamed in P3
- Fixed most of the unit tests to work on all python versions
- Fixed md5 calculation
- build.get_console() now returns string in all python versions
- Fixed assertion renamed in P3
- Added small delay to let jenkins catchup
- add logging url when non 200 OK response
- Added short delay to let job run for a bit
- Added section about Python versions
- Bumped Python from 3.3 to 3.4
- Revert "Bumped Python from 3.3 to 3.4"
- Added better test to job._add_missing_builds()
- Fix for issue #280
- Disabled "too many branches" in pylint
- Fix for P3 compatibility
- add job.get_build_metadata
- add comment about depth control
- add get_causes
- make tests more robust
- Example of adding a shell build
- Fix for issue #291
- pre release tidy-ups and version bump
- revert accidental removel of unittest2 from the setup.py script
- add release script, fix broken landscape.io image in docs
- minor version bump
- proposed fix for #295 - crash during get_params on maven jobs
- added travis buttons to readme
- version bump
- add the __version__ feature to the package
- added a way of getting the api version from the command-line
- added tagging of releases
- fix some pep8 violations
- added additional versions of python to the travis configuration;
- tidy up travis files
- add doc upload step to the release script
- mega tidy-up of the docs
- tidy up links section
- better support for querying plugins
- pep8 tidyup and example of plugin querying
- plugin info example
- version bump
- remove parts of failing tests
- remove duplicated travis link
- ensure that tags are pushed at the end of every build
- Version bump and update deps to the latest version. Also added a link to requires.io to the readme.rst file
- Proposed fix for #297
- interim commit - refactor of queue &amp; invocation
- reducing the number of errors from the refactor of invocation/queues
- fix a bunch of tests
- Pep8 fixes + remove bogus imports
- Fix way more bugs.
- Trying to fix more errors.
- Fix many more bugs
- Fix some pep8 violations I had introduced.
- Cut out some more crap, but noticed that invocation of parameterized builds is broken.
- Lots of fixes
- Fix redefinition of id.
- Tidy up exceptions file.
- More fixes to parameterized builds - still broken.
- Tiny fixes.
- adding test to illustrate bug with get_revision with no scm
- Fixing get_revision with no scm
- Fixed kerberos request's interface
- Linter fixes
- adding test to illustrate bug with get_revision with no scm
- Fixing get_revision with no scm
- Fixed kerberos request's interface
- Linter fixes
- Low level api change to support tree api
- Changed job and build modules to use tree api
- Replaced _poll_if_needed with lightweight tree calls
- Added support for JENKINS_URL env. variable
- Added use of tree api to node, job, queue and fixed tests
- Pylint fixes
- added decode to test to make it work in PY 3.x
- Fix a typo in a function name in queing
- add update_config() to view
- add View.get_config() and tests covering View.get_config() as well as View.update_config()
- fix invoke(skip_if_running=True)
- Set pylint version to ensure compatibility with python 2.6
- Set pylint version to ensure compatibility with python 2.6
- version bump</changelog>

</package>
<package pkgid="a53c88a150e606cc50d991fdcfbe3ccbfa08154a60c735be5b3e2506ea9cc2c5" name="pristine-tar" arch="i586">
    <version epoch="0" ver="1.33" rel="3.1"/>

<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 1.28" date="1368446400">- Version bump to 1.28</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 1.28" date="1370260800">- Fixes Bug #998
  * Mangle PAX headers when using posix tar format
  * Use posix tar format by default
  * implement tar format guessing</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 1.28" date="1377259200">- Remove all timestamps from extended PAX headers of posix tarballs</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 1.28" date="1385726400">- Workaround for broken pristine-tar branches in Tizen
  Makes it possible to checkout tarballs from certain broken pristine-tar
  branches created with buggy versions of Tizen pristine-tar on openSUSE.
- update packaging for new gbs release</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 1.30" date="1393502400">- Version bump to 1.30</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen/1.31-20140520" date="1400587200">- Version bump to 1.31</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen/1.32-20140915" date="1410782400">- Version bump to 1.32
- rpm packaging: fix build for CentOS 7</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen/1.32-20150212" date="1423742400">- Relax the tar dependency by allowing any version of tar to be used.
  It turned out that in Tizen we do not have the problem the version
  restriction was originally put for.</changelog>
<changelog author="Rong Jinhui &lt;jinhui.rong@samsung.com&gt; 1.33" date="1444737600">- Version bump to 1.33</changelog>

</package>
<package pkgid="bbfa0291e1f0b8f2875a365c089ee817a3b98a1ed681519cef347fc37cf28863" name="build" arch="i586">
    <version epoch="1" ver="20150115" rel="5.4"/>

<changelog author="adrian@suse.de" date="1298980800">- support new cross build initvm. Done by James Perkins from LinuxFoundation
- do not use loop device anymore when using block devices directly</changelog>
<changelog author="lnussel@suse.de" date="1301400000">- make sure default.conf is no stale symlink</changelog>
<changelog author="adrian@suse.de" date="1302868800">- switch back to single process build for debian to be conform with
  their policy
- use cpuid kvm64 on kvm for 64bit as workaround for a cpuid bug</changelog>
<changelog author="adrian@suse.de" date="1303905600">- revert to single cpu build default for debian packages</changelog>
<changelog author="adrian@suse.de" date="1305201600">- conflict with old bsdtar (not supporting --chroot)</changelog>
<changelog author="adrian@suse.de" date="1306324800">- allow to use simple spec file parser via Build::show</changelog>
<changelog author="adrian@suse.de" date="1307361600">- do not build ia64 baselibs packages for openSUSE anymore</changelog>
<changelog author="adrian@suse.de" date="1308312000">- support new kiwi command line mode</changelog>
<changelog author="adrian@suse.de" date="1309435200">- fixed kiwi execution call for some versions</changelog>
<changelog author="adrian@suse.de" date="1309521600">- compat mode for broken kiwi of openSUSE 11.4</changelog>
<changelog author="opensuse@cboltz.de" date="1312718400">- Requires:/Recommends: were part of the package description.
  Moved them to the correct place.</changelog>
<changelog author="adrian@suse.de" date="1317038400">- fixing kvm cpuid setting for AMD and Intel CPU's
- support new xen tools
- fixed qemu build initialisation</changelog>
<changelog author="adrian@suse.de" date="1317729600">- use new qemu-*-binfmt handler to run commands with correct $0
- fix build for Factory</changelog>
<changelog author="mls@suse.de" date="1318248000">- add sles11sp2 build config and adapt autodetection [bnc#711770]</changelog>
<changelog author="adrian@suse.de" date="1319544000">- use github.com as git repo now
- fix build for rpmv5</changelog>
<changelog author="adrian@suse.de" date="1329134400">- Support for openSUSE 12.2 (current factory)
- Support for crossbuild via Hostarch directive
- PPC KVM support
- swap space gets taken into account for ulimits
- Failure on not supported personality set</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1338638400">- https repo support
- clean up print info
- Refine-download-preinstall-install-progress-info</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1340193600">- bump to a new higher version to get this updated always
- clean up .src.cache file if --clean option specified</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1344686400">- update to version 2012.08.10</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1347364800">- update to version 2012.09.11</changelog>

</package>
<package pkgid="005ac6fef8d47ecfd535a03e03da5f2bccc8a4f71496e271a67010bd99c2155e" name="perl-Crypt-SSLeay" arch="x86_64">
    <version epoch="0" ver="0.64" rel="1.1"/>

<changelog author="Fedora Release Engineering &lt;rel-eng@lists.fedoraproject.org&gt; - 0.57-12" date="1248523200">- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild</changelog>
<changelog author="Tomas Mraz &lt;tmraz@redhat.com&gt; - 0.57-13" date="1250856000">- rebuilt with new openssl</changelog>
<changelog author="Marcela Ma?lá?ová &lt;mmaslano@redhat.com&gt; - 0.57-14" date="1259150400">- change Makefile for openssl 1.0, which couldn't be found properly before</changelog>
<changelog author="Stepan Kasal &lt;skasal@redhat.com&gt; - 0.57-16" date="1260187200">- rebuild against perl 5.10.1</changelog>
<changelog author="Marcela Maslanova &lt;mmaslano@redhat.com&gt; - 0.57-17" date="1272628800">- Mass rebuild with perl-5.12.0</changelog>
<changelog author="Petr Sabata &lt;psabata@redhat.com&gt; - 0.58-1" date="1283342400">- New upstream release, v0.58
- removing perl-Crypt-SSLeay-0.57-live-tests.patch, fixed in upstream
- removing perl-Crypt-SSLeay-Makefile_ssl1.patch, fixed in upstream</changelog>
<changelog author="Marcela Maslanova &lt;mmaslano@redhat.com&gt; - 0.58-2" date="1292500800">- Rebuild to fix problems with vendorarch/lib (#661697)</changelog>
<changelog author="Fedora Release Engineering &lt;rel-eng@lists.fedoraproject.org&gt; - 0.58-3" date="1297166400">- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild</changelog>
<changelog author="Paul Howarth &lt;paul@city-fan.org&gt; - 0.58-4" date="1303214400">- Remove buildroot specification and cleaning, not needed for modern rpmbuild
- Use %{?perl_default_filter}
- Filter the perl(DB) provide in a way that works with rpm &gt;= 4.9
- Use DESTDIR rather than PERL_INSTALL_ROOT
- Fix line endings on documentation
- Fix upstream source URL
- Fix argument order for find with -depth</changelog>
<changelog author="Petr Sabata &lt;contyk@redhat.com&gt; - 0.58-5" date="1311163200">- Perl mass rebuild</changelog>
<changelog author="Petr Pisar &lt;ppisar@redhat.com&gt; - 0.58-6" date="1311336000">- RPM 4.9 dependency filtering added</changelog>
<changelog author="Petr Sabata &lt;contyk@redhat.com&gt; - 0.58-7" date="1315396800">- Link to the ca-certificates ca-bundle.crt instead of shipping our own,
  outdated copy (#734385)</changelog>
<changelog author="Fedora Release Engineering &lt;rel-eng@lists.fedoraproject.org&gt; - 0.58-8" date="1326456000">- Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild</changelog>

</package>
<package pkgid="804f64cf6e7ca201d1736a64d4b60962c0e41509ecbe567f71146b96f4b5c5f2" name="librpm-tizen" arch="x86_64">
    <version epoch="0" ver="4.11.0.1.tizen20140530" rel="5.1"/>

<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 4.10.91.tizen20121215" date="1361448000">- packaging: Drop bdb sources
- packaging: fix build for Fedora (18)
- packaging: disable autoprov</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 4.10.91.tizen20121215" date="1361534400">- packaging: fix build for CentOS</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 4.10.91.tizen20121215" date="1361793600">- packaging: Disable autoreq, too
- Ignore unknown internal scripts</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 4.10.91.tizen20121215" date="1361966400">- Enable lua
- update package Provide info
- Add a provide tag to make gbs depend on new changes
- packaging: fix Makefile
- Install Tizen macros</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 4.11.0.1.tizen20130304" date="1362657600">- Version bump to latest from Tizen</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 4.11.0.1.tizen20130618" date="1371556800">- Version bump to latest from Tizen 3.0</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 4.11.0.1.tizen20130618" date="1377086400">- fix segmentation fault error while parsing spec
- Bump the log level of "unexpanded script" msg
- Prevent execution of arbitrary scripts</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 4.11.0.1.tizen20130618" date="1380628800">- lua: fall through failed lua scripts
- lua: Enable Lua
- Ignore bad expressions in %if conditionals</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen-tools/4.11.0.1.tizen20130618-20140306" date="1394107200">- Fix build against Lua 5.2</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen-tools/4.11.0.1.tizen20140530-20140723" date="1406116800">- Rebase on latest Tizen 3.0
- packaging: enable lua 5.2 for openSUSE
- rpm-packaging: enable customized autoreq</changelog>

</package>
<package pkgid="bbf3f5fbfa3c053f56a1859ce17609c64a3c3f062968c5eae41f8aa654a4f70c" name="pristine-tar" arch="x86_64">
    <version epoch="0" ver="1.33" rel="3.1"/>

<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 1.28" date="1368446400">- Version bump to 1.28</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 1.28" date="1370260800">- Fixes Bug #998
  * Mangle PAX headers when using posix tar format
  * Use posix tar format by default
  * implement tar format guessing</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 1.28" date="1377259200">- Remove all timestamps from extended PAX headers of posix tarballs</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 1.28" date="1385726400">- Workaround for broken pristine-tar branches in Tizen
  Makes it possible to checkout tarballs from certain broken pristine-tar
  branches created with buggy versions of Tizen pristine-tar on openSUSE.
- update packaging for new gbs release</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 1.30" date="1393502400">- Version bump to 1.30</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen/1.31-20140520" date="1400587200">- Version bump to 1.31</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen/1.32-20140915" date="1410782400">- Version bump to 1.32
- rpm packaging: fix build for CentOS 7</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen/1.32-20150212" date="1423742400">- Relax the tar dependency by allowing any version of tar to be used.
  It turned out that in Tizen we do not have the problem the version
  restriction was originally put for.</changelog>
<changelog author="Rong Jinhui &lt;jinhui.rong@samsung.com&gt; 1.33" date="1444737600">- Version bump to 1.33</changelog>

</package>
<package pkgid="ede495a4e6dcfe921ed40225dbd5b6e6561234031c469de485995c57795cfb9c" name="qemu-arm-static" arch="x86_64">
    <version epoch="0" ver="1.6.0rc3" rel="5.1"/>

</package>
<package pkgid="3b10c8f7c1c74ce52895c7b4f0da950a60ef6633821069c34ff30967f8813918" name="python-jenkinsapi" arch="x86_64">
    <version epoch="0" ver="0.2.26" rel="5.1"/>

<changelog author="Ed Bartosh &lt;eduard.bartosh@intel.com&gt; 0.2.20" date="1391169600">- Packaging is taken from OpenSUSE</changelog>
<changelog author="Ed Bartosh &lt;ed@ed.fi.intel.com&gt; 0.2.26" date="1422705600">- Only process non empty actions while getting job parameters
- Add support for Job Folders (CloudBees Folders Plugin).
- Fix tests.
- get_build_triggerurl logic fix
- job.get_build_triggerurl update
- making change more pythonic
- Addressing issue/221 - changing depth=1
- Added Aleksey to primary authors list
- Version bump
- added documentation about getting version info
- move the stuff out of readme
- Added note about experimental nature of this branch
- Added Python 3.3 to this branch build spec
- Added build for Python 2.6
- Tying to fix P3 incompatibility
- Fix wrong translation of 'except' from python2 to pytho3
- Use print() (with 'from __future__ import print_function')
- urllib compatibility
- exception.message -&gt; str(exception)
- basestring, unicode, str compatibility
- iteritems -&gt; items Queue -&gt; queue
- resolve_job_folders skipping jobs fix
- Changed Jenkins URL to download LTS version
- add unit test for multiple top level folders
- Changed Jenkins URL to download LTS version
- Added conversions from bytes to strings
- polling jenkins each time Jobs is initialized
- Add support to create Jenkins object without immediately polling jobs.
- minor fix to exception messages to improve readability.
- Adapt fingerprint to catch HTTPError from requests
- Add a few Jenkins API usage examples
- Fixed pylint violations
- Simplified get_job_url function
- Add support to create Jenkins object without immediately polling jobs.
- minor fix to exception messages to improve readability.
- Adapt fingerprint to catch HTTPError from requests
- Fixed pylint violations
- Simplified get_job_url function
- Small changes in jobs classes
- Formatting fixes
- Add test to verify fetching of plugin details,
- Fix for issue #268 and unit tests for it
- Fixed incorrect merge
- Set to use unittest2 library instead of unittest
- Added unittest2 so travis can run tests with recent Python
- Set unitest2 to be used only on python 2.6
- Added support for 'del' in Jenkins object: remove job
- Added small delay for test_parametrized_build
- Added re-try when removing job
- Added support for 'del' in Jenkins object: remove job
- Added small delay for test_parametrized_build
- Added re-try when removing job
- Removed paragraph about Python 3 branch
- fixes job invoke when no build parameters exist for a particular job
- Fixed most of the unit tests to work on all python versions
- Fixed md5 calculation
- build.get_console() now returns string in all python versions
- Fixed assertion renamed in P3
- Fixed most of the unit tests to work on all python versions
- Fixed md5 calculation
- build.get_console() now returns string in all python versions
- Fixed assertion renamed in P3
- Added small delay to let jenkins catchup
- add logging url when non 200 OK response
- Added short delay to let job run for a bit
- Added section about Python versions
- Bumped Python from 3.3 to 3.4
- Revert "Bumped Python from 3.3 to 3.4"
- Added better test to job._add_missing_builds()
- Fix for issue #280
- Disabled "too many branches" in pylint
- Fix for P3 compatibility
- add job.get_build_metadata
- add comment about depth control
- add get_causes
- make tests more robust
- Example of adding a shell build
- Fix for issue #291
- pre release tidy-ups and version bump
- revert accidental removel of unittest2 from the setup.py script
- add release script, fix broken landscape.io image in docs
- minor version bump
- proposed fix for #295 - crash during get_params on maven jobs
- added travis buttons to readme
- version bump
- add the __version__ feature to the package
- added a way of getting the api version from the command-line
- added tagging of releases
- fix some pep8 violations
- added additional versions of python to the travis configuration;
- tidy up travis files
- add doc upload step to the release script
- mega tidy-up of the docs
- tidy up links section
- better support for querying plugins
- pep8 tidyup and example of plugin querying
- plugin info example
- version bump
- remove parts of failing tests
- remove duplicated travis link
- ensure that tags are pushed at the end of every build
- Version bump and update deps to the latest version. Also added a link to requires.io to the readme.rst file
- Proposed fix for #297
- interim commit - refactor of queue &amp; invocation
- reducing the number of errors from the refactor of invocation/queues
- fix a bunch of tests
- Pep8 fixes + remove bogus imports
- Fix way more bugs.
- Trying to fix more errors.
- Fix many more bugs
- Fix some pep8 violations I had introduced.
- Cut out some more crap, but noticed that invocation of parameterized builds is broken.
- Lots of fixes
- Fix redefinition of id.
- Tidy up exceptions file.
- More fixes to parameterized builds - still broken.
- Tiny fixes.
- adding test to illustrate bug with get_revision with no scm
- Fixing get_revision with no scm
- Fixed kerberos request's interface
- Linter fixes
- adding test to illustrate bug with get_revision with no scm
- Fixing get_revision with no scm
- Fixed kerberos request's interface
- Linter fixes
- Low level api change to support tree api
- Changed job and build modules to use tree api
- Replaced _poll_if_needed with lightweight tree calls
- Added support for JENKINS_URL env. variable
- Added use of tree api to node, job, queue and fixed tests
- Pylint fixes
- added decode to test to make it work in PY 3.x
- Fix a typo in a function name in queing
- add update_config() to view
- add View.get_config() and tests covering View.get_config() as well as View.update_config()
- fix invoke(skip_if_running=True)
- Set pylint version to ensure compatibility with python 2.6
- Set pylint version to ensure compatibility with python 2.6
- version bump</changelog>

</package>
<package pkgid="bb3bfe0f855ecca31c5142ea3e61f14f6ff89b8cbbef8b44fbd1607c09ac61dc" name="build-mkbaselibs" arch="x86_64">
    <version epoch="1" ver="20150115" rel="5.4"/>

<changelog author="adrian@suse.de" date="1298980800">- support new cross build initvm. Done by James Perkins from LinuxFoundation
- do not use loop device anymore when using block devices directly</changelog>
<changelog author="lnussel@suse.de" date="1301400000">- make sure default.conf is no stale symlink</changelog>
<changelog author="adrian@suse.de" date="1302868800">- switch back to single process build for debian to be conform with
  their policy
- use cpuid kvm64 on kvm for 64bit as workaround for a cpuid bug</changelog>
<changelog author="adrian@suse.de" date="1303905600">- revert to single cpu build default for debian packages</changelog>
<changelog author="adrian@suse.de" date="1305201600">- conflict with old bsdtar (not supporting --chroot)</changelog>
<changelog author="adrian@suse.de" date="1306324800">- allow to use simple spec file parser via Build::show</changelog>
<changelog author="adrian@suse.de" date="1307361600">- do not build ia64 baselibs packages for openSUSE anymore</changelog>
<changelog author="adrian@suse.de" date="1308312000">- support new kiwi command line mode</changelog>
<changelog author="adrian@suse.de" date="1309435200">- fixed kiwi execution call for some versions</changelog>
<changelog author="adrian@suse.de" date="1309521600">- compat mode for broken kiwi of openSUSE 11.4</changelog>
<changelog author="opensuse@cboltz.de" date="1312718400">- Requires:/Recommends: were part of the package description.
  Moved them to the correct place.</changelog>
<changelog author="adrian@suse.de" date="1317038400">- fixing kvm cpuid setting for AMD and Intel CPU's
- support new xen tools
- fixed qemu build initialisation</changelog>
<changelog author="adrian@suse.de" date="1317729600">- use new qemu-*-binfmt handler to run commands with correct $0
- fix build for Factory</changelog>
<changelog author="mls@suse.de" date="1318248000">- add sles11sp2 build config and adapt autodetection [bnc#711770]</changelog>
<changelog author="adrian@suse.de" date="1319544000">- use github.com as git repo now
- fix build for rpmv5</changelog>
<changelog author="adrian@suse.de" date="1329134400">- Support for openSUSE 12.2 (current factory)
- Support for crossbuild via Hostarch directive
- PPC KVM support
- swap space gets taken into account for ulimits
- Failure on not supported personality set</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1338638400">- https repo support
- clean up print info
- Refine-download-preinstall-install-progress-info</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1340193600">- bump to a new higher version to get this updated always
- clean up .src.cache file if --clean option specified</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1344686400">- update to version 2012.08.10</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1347364800">- update to version 2012.09.11</changelog>

</package>
<package pkgid="084745256f4611464af909b42cd73509484eefd73d69538747c86d3b80487cb8" name="build-mkdrpms" arch="x86_64">
    <version epoch="1" ver="20150115" rel="5.4"/>

<changelog author="adrian@suse.de" date="1298980800">- support new cross build initvm. Done by James Perkins from LinuxFoundation
- do not use loop device anymore when using block devices directly</changelog>
<changelog author="lnussel@suse.de" date="1301400000">- make sure default.conf is no stale symlink</changelog>
<changelog author="adrian@suse.de" date="1302868800">- switch back to single process build for debian to be conform with
  their policy
- use cpuid kvm64 on kvm for 64bit as workaround for a cpuid bug</changelog>
<changelog author="adrian@suse.de" date="1303905600">- revert to single cpu build default for debian packages</changelog>
<changelog author="adrian@suse.de" date="1305201600">- conflict with old bsdtar (not supporting --chroot)</changelog>
<changelog author="adrian@suse.de" date="1306324800">- allow to use simple spec file parser via Build::show</changelog>
<changelog author="adrian@suse.de" date="1307361600">- do not build ia64 baselibs packages for openSUSE anymore</changelog>
<changelog author="adrian@suse.de" date="1308312000">- support new kiwi command line mode</changelog>
<changelog author="adrian@suse.de" date="1309435200">- fixed kiwi execution call for some versions</changelog>
<changelog author="adrian@suse.de" date="1309521600">- compat mode for broken kiwi of openSUSE 11.4</changelog>
<changelog author="opensuse@cboltz.de" date="1312718400">- Requires:/Recommends: were part of the package description.
  Moved them to the correct place.</changelog>
<changelog author="adrian@suse.de" date="1317038400">- fixing kvm cpuid setting for AMD and Intel CPU's
- support new xen tools
- fixed qemu build initialisation</changelog>
<changelog author="adrian@suse.de" date="1317729600">- use new qemu-*-binfmt handler to run commands with correct $0
- fix build for Factory</changelog>
<changelog author="mls@suse.de" date="1318248000">- add sles11sp2 build config and adapt autodetection [bnc#711770]</changelog>
<changelog author="adrian@suse.de" date="1319544000">- use github.com as git repo now
- fix build for rpmv5</changelog>
<changelog author="adrian@suse.de" date="1329134400">- Support for openSUSE 12.2 (current factory)
- Support for crossbuild via Hostarch directive
- PPC KVM support
- swap space gets taken into account for ulimits
- Failure on not supported personality set</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1338638400">- https repo support
- clean up print info
- Refine-download-preinstall-install-progress-info</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1340193600">- bump to a new higher version to get this updated always
- clean up .src.cache file if --clean option specified</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1344686400">- update to version 2012.08.10</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1347364800">- update to version 2012.09.11</changelog>

</package>
<package pkgid="78c8071148818f59ab0194447858dd5b689c79a6a1c8e5a55357dfd0ff108d62" name="lthor" arch="x86_64">
    <version epoch="0" ver="1.4" rel="3.1"/>

<changelog author="eduard.bartosh@intel.com" date="1352203200">- Initial packaging</changelog>

</package>
<package pkgid="2135ccc49361be8840ba2f2e8b1aa4c958f8aa611492e0c6c0f2283d42ba1596" name="depanneur" arch="x86_64">
    <version epoch="0" ver="0.15" rel="4.1"/>

<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.1" date="1347364800">- first version of depanneur, including the following features:
  * dependency build wit correct dependendcy order
  * parallel build with customized threads pool
  * full build to specify a top dir of all packages tree
  * support generate local repo once build finished</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.2" date="1351080000">- fix getlogin() fail issue on some system
- add function worker_thread() to clean up build worker in one place
- refine incremental build, don't need force running gbs in top git dir
- support multiple spec files building in one package.
- fix Ctrl + C issue:
  - if one package build for a long time(&gt;15 mins), sudo req passwd again
  - sudo timeout issue, which will result in endless loop
- expand ~ in TIZEN_BUILD_ROOT, to fix create dir fail issue
- collect export error packages &amp; report, and return None 0 if any error occur
- support building one spec file for --spec option used in gbs build
- refine error report in depanneur. Three types of error: export error,
  expansion error and rpmbuild error, detail expansion info and build log are
  attached behind packages.
- dependency circle check: if circle found from package dependency, the circle
  link is printed and exit. currently, we don't support circle building.
  - break expand_deps into two functions: one is refresh_repo(), which is
    used to update %repo, which store repodata info, including 'provide' and
    'depend' info, and another fuction is expand_deps().
  - Add get_deps() to get direct dependency of specified package(specfile).
  - Using Depth-first search algorithrm to try to find circle
- use bsd_glob to replace glob to fix thread crash issue in openSUSE 12.2
  (perl 5.16)
- add --debug option for 'gbs export' if --debug specified
- Code cleanup
  - fix perlcritic's warning
  - remove useless sub wanted
  - remove useless variables in git_wantted
  - remove trailing spaces</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.2.1" date="1352721600">- Update dependency: depend on tizen-build &gt;= 2012.10.10.1</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.3" date="1353931200">- --noinit support
- Support build RPM packages for incremental build
- warning user and try again if umount failed for incremental build
- no need create/unpack tar ball for incremental build
- x86_64 support
- keep src rpm for each arch
- show build progress for multiple packages build
- Add --spec to support multi-spec project
- Add --define option to define macros for rpmbuild
- Modify SUDOV_PERIOD smaller (5 mins)
- Add more output info about building status
- Add --keep-packs to keep unused packages in buildroot</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.4" date="1358942400">- Refine build behavior: gbs build should not depend on local copy
- Use --target option for build script to build specified arch
- add depanneur_sudo and sudoers configure to avoid requesting passwd
- use the processors number instead of hard code 4 for parallel compile
- show package info for arch incompatible warning
- Add --no-patch-export option for source export
- supported arches clean up
- bug fix:
  - crash if specify a non-exist specfile with --spec option</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.5" date="1361448000">- Add --binary-from-file option to specify a package list file
- Change --binary-list option, accept a packages list separated by comma(,).
- Add --deps to build specified packages and all packages they depend
- Add --rdeps to build specified packages and all packages depend on them</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.6" date="1364212800">- fix createrepo option usage issue
- depend on new version of obs-build-2013.03.11
- depend on createrepo 0.9.9 for deltarpm support</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.7" date="1368532800">- avoid export multiple times for packages contails multiple spec files
- put all build roots in a individual directory, which can be mounted as tmpfs
  to speed up building
- Add statistical of each errors, including export/expansion/rpmbuild errors
- refine createrepo: add --update for if repodata already exists
- bug fix:
  - prereqs involved for dependency resolving
  - fix wrong @deps which contain version info
  - quote metacharacters in pattern to fix strip issue if metacharacters exist</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.8" date="1372680000">- create debug package by default
- refinement:
  - report circle in time
  - load dependency data during refresh repo, instead of during parsing every
    spec file
- bug fix:
  - get target arch from build conf if 'Target' is set in build config, which
    make gbs and remote obs generate the same arch for final RPM package
  - exit unexpectedly if circle exist
  - using higer version in different repo</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.9" date="1377000000">- Define the de-facto %opensuse_bs macro from OBS to be zero</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.10" date="1381924800">- Remove hard code of _rpmdir in build root, use chroot to detect instead
- Support comments (#) in binary-list file for --binary-from-file option
- Remove previous built rpm and srpm if new version has been built out</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.11" date="1386676800">- depend on latest build-20131112
- generate html report automatically
- refine build report summary:
  - add build log dir
  - always print the dirs of final build files
  - add succeeded packages number
- depend on initvm to register qemu handler
- add arm 64(aarch64) support</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.12" date="1394193600">- Fix export failed if packaging dir is symblic
- depend on new version build to fix binfmt handlers register issue
- Return error if arch is not compatible for build</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.13" date="1400673600">- Add a new --spec-commit option to support new orphan-packaging
  development model
- Add group metadata to local repodata if package-groups.rpm exists</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.13.1" date="1402574400">- ignore already finished packages for dependency resolving
- ignore already skipped packages for dependency resolving
- add gbs version infor in final build report
- depend on new obs-build to fix qemu arch64 issue</changelog>
<changelog author="Li Jinjing &lt;jinjingx.li@intel.com&gt; 0.14" date="1413374400">- fix build with --include-all on development branch(orphan-packaging mode)
- support --fallback-to-native option of gbs
- support --icecream option of gbs
- support new arch mips and mipsel for gbs
- support --skip-srcrpm option of gbs
- fix leaking of temporary files
- add rpm changelog
- add comments for core builder code</changelog>
<changelog author=".zhang@samsung.com&gt; 0.15" date="1457092800">- add --fail-fast option of gbs
- fix CentOS 7 require</changelog>

</package>
<package pkgid="01602eec5710dc05277180d6eda56fb90e6c8ea3074cb7b10cc8d0478a851ead" name="build" arch="x86_64">
    <version epoch="1" ver="20150115" rel="5.4"/>

<changelog author="adrian@suse.de" date="1298980800">- support new cross build initvm. Done by James Perkins from LinuxFoundation
- do not use loop device anymore when using block devices directly</changelog>
<changelog author="lnussel@suse.de" date="1301400000">- make sure default.conf is no stale symlink</changelog>
<changelog author="adrian@suse.de" date="1302868800">- switch back to single process build for debian to be conform with
  their policy
- use cpuid kvm64 on kvm for 64bit as workaround for a cpuid bug</changelog>
<changelog author="adrian@suse.de" date="1303905600">- revert to single cpu build default for debian packages</changelog>
<changelog author="adrian@suse.de" date="1305201600">- conflict with old bsdtar (not supporting --chroot)</changelog>
<changelog author="adrian@suse.de" date="1306324800">- allow to use simple spec file parser via Build::show</changelog>
<changelog author="adrian@suse.de" date="1307361600">- do not build ia64 baselibs packages for openSUSE anymore</changelog>
<changelog author="adrian@suse.de" date="1308312000">- support new kiwi command line mode</changelog>
<changelog author="adrian@suse.de" date="1309435200">- fixed kiwi execution call for some versions</changelog>
<changelog author="adrian@suse.de" date="1309521600">- compat mode for broken kiwi of openSUSE 11.4</changelog>
<changelog author="opensuse@cboltz.de" date="1312718400">- Requires:/Recommends: were part of the package description.
  Moved them to the correct place.</changelog>
<changelog author="adrian@suse.de" date="1317038400">- fixing kvm cpuid setting for AMD and Intel CPU's
- support new xen tools
- fixed qemu build initialisation</changelog>
<changelog author="adrian@suse.de" date="1317729600">- use new qemu-*-binfmt handler to run commands with correct $0
- fix build for Factory</changelog>
<changelog author="mls@suse.de" date="1318248000">- add sles11sp2 build config and adapt autodetection [bnc#711770]</changelog>
<changelog author="adrian@suse.de" date="1319544000">- use github.com as git repo now
- fix build for rpmv5</changelog>
<changelog author="adrian@suse.de" date="1329134400">- Support for openSUSE 12.2 (current factory)
- Support for crossbuild via Hostarch directive
- PPC KVM support
- swap space gets taken into account for ulimits
- Failure on not supported personality set</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1338638400">- https repo support
- clean up print info
- Refine-download-preinstall-install-progress-info</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1340193600">- bump to a new higher version to get this updated always
- clean up .src.cache file if --clean option specified</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1344686400">- update to version 2012.08.10</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1347364800">- update to version 2012.09.11</changelog>

</package>
<package pkgid="c6006e571c2342efa865244647d3c9ce818d601f25214cdc0fd9ba0bd1612794" name="build-initvm-x86_64" arch="x86_64">
    <version epoch="1" ver="20150115" rel="5.4"/>

<changelog author="adrian@suse.de" date="1298980800">- support new cross build initvm. Done by James Perkins from LinuxFoundation
- do not use loop device anymore when using block devices directly</changelog>
<changelog author="lnussel@suse.de" date="1301400000">- make sure default.conf is no stale symlink</changelog>
<changelog author="adrian@suse.de" date="1302868800">- switch back to single process build for debian to be conform with
  their policy
- use cpuid kvm64 on kvm for 64bit as workaround for a cpuid bug</changelog>
<changelog author="adrian@suse.de" date="1303905600">- revert to single cpu build default for debian packages</changelog>
<changelog author="adrian@suse.de" date="1305201600">- conflict with old bsdtar (not supporting --chroot)</changelog>
<changelog author="adrian@suse.de" date="1306324800">- allow to use simple spec file parser via Build::show</changelog>
<changelog author="adrian@suse.de" date="1307361600">- do not build ia64 baselibs packages for openSUSE anymore</changelog>
<changelog author="adrian@suse.de" date="1308312000">- support new kiwi command line mode</changelog>
<changelog author="adrian@suse.de" date="1309435200">- fixed kiwi execution call for some versions</changelog>
<changelog author="adrian@suse.de" date="1309521600">- compat mode for broken kiwi of openSUSE 11.4</changelog>
<changelog author="opensuse@cboltz.de" date="1312718400">- Requires:/Recommends: were part of the package description.
  Moved them to the correct place.</changelog>
<changelog author="adrian@suse.de" date="1317038400">- fixing kvm cpuid setting for AMD and Intel CPU's
- support new xen tools
- fixed qemu build initialisation</changelog>
<changelog author="adrian@suse.de" date="1317729600">- use new qemu-*-binfmt handler to run commands with correct $0
- fix build for Factory</changelog>
<changelog author="mls@suse.de" date="1318248000">- add sles11sp2 build config and adapt autodetection [bnc#711770]</changelog>
<changelog author="adrian@suse.de" date="1319544000">- use github.com as git repo now
- fix build for rpmv5</changelog>
<changelog author="adrian@suse.de" date="1329134400">- Support for openSUSE 12.2 (current factory)
- Support for crossbuild via Hostarch directive
- PPC KVM support
- swap space gets taken into account for ulimits
- Failure on not supported personality set</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1338638400">- https repo support
- clean up print info
- Refine-download-preinstall-install-progress-info</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1340193600">- bump to a new higher version to get this updated always
- clean up .src.cache file if --clean option specified</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1344686400">- update to version 2012.08.10</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1347364800">- update to version 2012.09.11</changelog>

</package>
<package pkgid="111612bbde87ab5acc56800e0ecad142d765b49594fd975e611bac6fb97b4fcc" name="gbs" arch="noarch">
    <version epoch="0" ver="0.24" rel="1.15.1"/>

<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.9" date="1344859200">- Upgrade to gbs v0.9, which contains the following features:
  * Upgrade to gbs v0.9, which contains the following features:
  * Re-designed gbs config format and parser to support multiple profile more flexible:
  - Use profile oriented style of config
  - Inherited config files supportted, three level support now: /etc/gbs.conf, ~/.gbs.conf
    and $PWD/.gbs.conf
  * integrate depanneur to gbs
  * local full build support, including the following features:
  - Multiple packages build
  - Dependency build
  - Parallel build
  - Incremental build
  * Patch/upstream tarball generation is enabled if "upstream" branch is found
  - If "pristine-tar" branch is found, checkout the orig tarball using pristine-tar
  - If "pristine-tar" branch is NOT found, generate the upstream tarball from a git tag matching the version
  - If the "upstream" branch is NOT found, gbs/gbp uses the current logic
  * If local repo specified, local repo is high priority when selecting packages
  * Code cleanup and refinements.
  * bug fix.</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.10" date="1347969600">- Upgrade to gbs v0.10, which contains the following features:
  * Re-designed gbs config format and parser to support multiple profile more flexible:
  - Use profile oriented style of config
  - Inherited config files supportted, three level support now: /etc/gbs.conf, ~/.gbs.conf
    and $PWD/.gbs.conf
  * integrate depanneur to gbs
  * local full build support, including the following features:
  - Multiple packages build
  - Dependency build
  - Parallel build
  - Incremental build
  * Patch/upstream tarball generation is enabled if "upstream" branch is found
  - If "pristine-tar" branch is found, checkout the orig tarball using pristine-tar
  - If "pristine-tar" branch is NOT found, generate the upstream tarball from a git tag matching the version
  - If the "upstream" branch is NOT found, gbs/gbp uses the current logic
  * If local repo specified, local repo is high priority when selecting packages
  * Remove -A option for gbs chroot, and build root directory must be specified
  * Code cleanup and refinements.
  * bug fix.</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.11" date="1351166400">- Upgrade to gbs v0.11, which contains the following bug fixing &amp; features:
  * Add --spec in 'gbs build' to support building one spec file for packages
    contains multiple spec files.
  * Add --profile/-P in 'gbs build' to support building packages using specified
    profile.
  * support local buildroot configurable in config file. The 'buildroot' can
    be set under the 'general' section as a global setting.
  * more clear and readable error report for gbs build, including gbs export
    error, expansion error and rpmbuild error.
  * bug fix:
  - fix plaintext passwd printed for some error cases
  - fix gbs archive tar ball issue if using user defined macro in spec file
  - fix request passwd again if one package build for a long time(&gt;15 mins)
  - fix sudo timeout issue, which will result in endless loop
  - fix return 0 from depanneur even if error occurs
  - unify display color of debug message in gbs and depanneur
  - fix endless loop if package circle dependency exists
  - fix gbs build error if '~' exist in build root path
  - fix passwd conflict issue with multiple instance of 'gbs build'
  - fix remotebuild can't run in sub-directory issue
  - fix gbs build error with https_proxy trailing '/'
  - fix gbs submit gives no error if there is no comment
  - describe missing dependencies for gbs build
  - support create project outside home:&lt;user&gt; if user have permission
  - fix server's certificate traceback issue for gbs remotebuild</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.11.1" date="1352721600">- Upgrade to gbs v0.11.1, which contains the following bug fixing &amp; features:
  * depend on depanneur 0.2.1 to fix build break issue for 'osc build'</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.12" date="1353844800">* upgrade to gbs v0.12, which contains the following bug fixing &amp; features:
  * support build rpm packages for incremental build
  * --noinit support
  * x86_64 support
  * add --keep-packs to keep unused packages in buildroot
  * show simple progress message for long time operations
  * pristine-tar support
  * patches generation for upstream branch exists
  * add --define option to define macros for rpmbuild
  * no hard code default base project
  * modify changelog order to follow default order of git log
  * change --spec to use only base file name
  * ignore .gbs.conf in patch-generation
  * cmd_import: enable importing patches
  * remove output repo and buildroot info to depanneur
  * bug fix:
  - set TIZEN_BUILD_ROOT as abspath</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.13" date="1358942400">* upgrade to gbs v0.13, which contains the following bug fixing &amp; features:
  * tab completion support
  * five new import options support:
  * --filters: files to filter out during import
  * --allow-same-version: allow to import already imported version
  * --native: A dist native package, no separate upstream
  * --upstream-vcs-tag: upstream VCS tag add to the merge commit
  * --no-patch-export support for export/remotebuild/build modules
  * Re-orgnize and group gbs help information
  * supported arches clean up
  * new subcommands 'clone/pull' added, which can be used for developers
    to clone tizen source code, and upstream/pristine-tar branches can be
    tracked automatically
  * add --tag option for submit module to support group submission
  * bug fix:
  - traceback occurs if specified outdir has no write permission
  - fix misleading error handling while no spec file found
  - break link structure if package is a link in OBS
  - crash if specify a non-exist specfile with --spec option</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.14" date="1361534400">* upgrade to gbs v0.14, which contains the following bug fixing &amp; features:
  * Add --binary-from-file option to specify a package list file
  * Change --binary-list option, accept a packages list separated by comma(,).
  * Add --deps to build specified packages and all packages they depend
  * Add --rdeps to build specified packages and all packages depend on them
  * bug fix:
  - gbs remotebuild does not work with linked package(not branch package)</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.15" date="1364212800">* upgrade to gbs v0.15, which contains the following bug fixing &amp; features:
  * add --baselibs option to support creating -32bit/-64bit/-x86 rpms for
    other arches
  * optimization for local build, especially for local full build
  * support updating multiple spec files in one package in export module
  * dependency upgrade, including qemu,osc,obs-build,crypt-ssleay
  * depend on new osc / osc-build
  * tizen system support
  * more osc api added: linked projects support, project deletion
  * bug fix:
  - consistency issue about package cache and sources
  - spec parser issue on ubuntu system</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.16" date="1368532800">* new subcommands 'createimage/cr' added, which can be used for developers
    to create image using ks file
  * performance optimization
  - put all build roots in a individual directory, which can be mounted as tmpfs
    to speed up building, based on our experimental build time can save 50%. We
    use 800 Tizen packages as test data, without tmpfs, gbs spent about 5 hours
    to build all packages, but with tmpfs enabled, only 2h, 25mins spent
  - avoid export multiple times for packages contain multiple spec files
  - refine createrepo: add --update for if repodata already exists
  - export: use lower compression level for orig tarballs
  * Add statistical of each errors, including export/expansion/rpmbuild errors
  * bug fix:
  - prereqs involved for dependency resolving
  - fix wrong @deps which contain version info
  - quote metacharacters in pattern to fix strip issue if metacharacters exist</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.17" date="1372680000">* upgrade to gbs v0.17, which contains the following bug fixing &amp; features:
  * New gbs config refinements
  - 'work_dir' support in [general] section
  - 'buildconf' support  in each [profile] section, use buildconf to specify
    local build conf
  - string interpolation: ${key} can be used to reference keys defined in
    [general] section
  - 'packaging_branch' support in [general] section, which can be used to
    specify working or development branch, and the default is 'master'
  * Support fetching build conf from standard RPM repodata
  * create debug package by default
  * refinement:
  - report package dependency cycles in time
  - load dependency data during refresh repo, instead of during parsing every
    spec file
  * bug fix:
  - get target arch from build conf if 'Target' is set in build config, which
    make gbs and remote obs generate the same arch for final RPM package
  - exit unexpectedly if cycles exist
  - using higer version in different repo</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.18" date="1377000000">* upgrade to gbs v0.18, which contains the following bug fixing &amp; features:
  * New gbs config refinements
  - offline local full build support for tizen 2.1/2.2/3.0 on tizen.org
  - support CI_CNT and B_CNT OBS
  - zsh completion support
  * bug fix:
  - fix build conf and profile naming limitation: build conf can't contains
    '-' and profile name can't start with digital, like profile.2.1tizen.</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.19" date="1382097600">* upgrade to gbs v0.19, which contains the following bug fixing &amp; features:
  * [build] support comments(#) in binary-list file for --binary-from-file
  * [build] remove previous built rpm and srpm if new version has been built out
  * [remotebuild] split out to separate sub-package: gbs-remotebuild
  * [import] add --upstream-tag option to set customized tag format
  * [export] track upstream/pristine-tar branch automatically, and use upstream
    and pristine-tar branch to generate tar ball.
  * [export] update all spec file if multiple spec files exist, updates
    including insert patches and VCS tag
  * [export] use commit sha1 instead of tag name in spec file VCS tag
  * [clone] add directory argument to gbs clone
  * [submit] support '/' in git branch
  * [conf] overwrite different level of gbs.conf instead of clean up them.
  * [conf] load project special gbs.conf if gitdir specified
  * update dependencies:
  - depanneur &gt;= 0.10
  - pristine-tar &gt;= 1.28
  - librpm-tizen &gt;= 4.11.0.1.tizen20130618-tizen20131001
  - git-buildpackage-rpm &gt;= 0.6.3-tizen20131017</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.20" date="1386676800">* [build] attempt to bypass HTTP caches when fetching repomd.xml
  * [build] generate html &amp; json format report
  * [build] no default upstream-branch option while calling depanneur
  * [build] refine build report summary:
  - add build log dir
  - always print the dirs of final build files
  - add succeeded packages number
  * [build] depend on initvm to register qemu handler
  * [build]add arm 64(aarch64) support
  * [export ]update pristine-tar to fix pristine-tar branch broken issue
  * [doc] refine gbs config and FAQ parts of gbs document
  * update dependencies:
  - depanneur &gt;= 0.10.1
  - build &gt;= 20131112
  - git-buildpackage &gt;= tizen20131202
  - pristine-tar &gt;= 1.28-tizen20131205</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.21" date="1394539200">* [jenkins-job] support two jenkins jobs for local build:
  - local full build jenkins job for build all packages and create images
  - build specified packages list and create images
  * [build] support --package-list and --package-from-file to select pacakges
  * [build] enhance exception caused by proxy
  * [export]clean untracked upstream/pristine-tar branches when export done
  * [doc] enable gbs man page
  * update dependencies:
  - depanneur &gt;= 0.12
  - build &gt;= 20131112
  - git-buildpackage &gt;= 0.6.8-tizen20140306</changelog>
<changelog author="Zhang Qiang &lt;qiang.z.zhang@intel.com&gt; 0.22" date="1400673600">* orphan-packaging development model (experimental)
  - implement 'devel' subcommand for  orphan-packaging development model
  - 'gbs devel' subcommand contains 'start', 'export', 'switch' and
    'convert' actions.
  - updated export/build import subcommands to support new
    orphan-packaging development model
  * conf:
  - make it possible to add new sections
  - make it possible to update an empty conf file
  - support new profile key 'exclude_packages'
  * changelog: utilize rpm-ch from git-buildpackage
  * build: add group metadata to local repodata if package-groups.rpm exists
  * fix Pylint warning</changelog>
<changelog author="Zhang Qiang &lt;qiang.z.zhang@intel.com&gt; 0.22.1" date="1402660800">* export: disable desktop notifications to fix backtrace issue
  * export: change VCS tag in spec to sha1 of commitish
  * build: ignore OS/ABI field in ELF header for aarch64</changelog>
<changelog author="Li Jinjing &lt;jinjingx.li@intel.com&gt; 0.23" date="1413374400">* upgrade to gbs v0.23, which contains the following bug fixing &amp; features:
  * export: support --fallback-to-native command line option to force gbs to
    export non-native packages in native packaging mode
  * export: support native config option by setting default value(yes, true,
    1, enabled, on) in .gbs.conf config file to enable native
    packaging mode in git tree
  * build: support no source rpm building with --skip-srcrpm option
  * build: add new arch mips and mipsel to support MIPS architecture and
    toolchains
  * build: support for distributed compiler network with --icecream option
  * bug fix:
  - build: fix --include-all option on development branch(orphan-packaging
    mode)
  - dependency issue on gbs repository for fedora
  - disable some invalid pylint errors
  * update dependencies:
  - depanneur &gt;= 0.14
  - git-buildpackage &gt;= 0.6.15-tizen20140828</changelog>
<changelog author="Li Jinjing &lt;jinjingx.li@intel.com&gt; 0.23.1" date="1421755200">* upgrade to gbs v0.23.1, which contains the following bug fixing &amp; features:
  * bug fix:
  - build: fix get "fallback_to_native" value from non-default gbs
    configuration
  - fix no jenkins user exists issue when installing gbs-jenkins-scripts and
    gbs-jenkins-jobs packages
  - fix bad indentation from pylint checking
  - fix tag mode in test_import script</changelog>
<changelog author="Dai Lang &lt;langx.dai@intel.com&gt; 0.23.2" date="1422878400">* upgrade to gbs v0.23.2, which contains the following bug fixing &amp; features:
  * bug fix:
  - build: fix get "fallback_to_native" value from non-default gbs
    configuration
  - fix bad indentation from pylint checking
  - fix tag mode in test_import script</changelog>
<changelog author="Wang jun &lt;junbill.wang@samsung.com&gt; 0.24" date="1462190400">* upgrade to gbs v0.24, which contains the following bug fixing &amp; features:
  * bug fix:
  - fix Security issues that normal user can gain root permission with gbs chroot
  - fix  git-build-package bugs and imporve some performance
  * Add --fail-fast option.
  * update dependencies:
  - depanneur &gt;= 0.15</changelog>

</package>
<package pkgid="9338228fbd745c35cba94e42edd38320643d2ec80cd0b83cfa9d53aca0bad06a" name="git-buildpackage" arch="noarch">
    <version epoch="0" ver="0.6.27" rel="6.1"/>

<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 0.6.0git20130530" date="1377172800">- rpm: Improve logging in case of rpmlib error
- Add clean method to GitRepository class
- Add all_remotes option in git fetch command
- Add tags option in git push command
- rpm: print a warning if importing gbp-specific librpm fails
- rpm: implement a wrapper module for rpm lib
- rpm: simplify SpecFile._parse_filtered_spec()
- Fix pylint warnings, follow Markus' sugesstion
- rpm: enhance spec parsing error messages
- GitRepository/add_files: consistently update all tracked files
- GitRepository: Add refspec option to fetch method
- GitRepository: Add all option to pull method
- GitRepository: Add force option to push method</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 0.6.3" date="1382011200">- buildpackage: support 'commit' variable for VCS tags
- Clone a repository to a specific directory
- Fix gbs clone failure if repo url is like host:repo.git
- SpecFile.set_tag: change the default place for new tags
- remove 'repo' param to adapt to changes of write_patch_file
- pq: pass commit_info to format_patch()
- pq: pass commit_info to format_patch()
- pq.write_patch_file: drop unused argument
- pq: fix generation of series file
- common/pq: fix length of patch filenames
- buildpackage: refactor prefix handling
- tests: remove unused import in submodule tests
- tests: upper case global variables in submodule tests
- tests: add some docstrings to git submodule tests
- tests: use eq_ and ok_ from nose tools in submodule tests
- tests: use sanitize some submodule tests
- pq-rpm: don't overwrite patches in the same series
- pq: don't overwrite patches in the same series
- rpm: support guessing spec file from git treeish
- rpm.SpecFile: support parsing spec as raw text data
- rpm: minor docstring fixes
- rpm: change guess_spec() to return SpecFile object
- GitRepository.list_tree: add 'paths' option
- common/pq: support more flexible pq-branch naming
- pq-rpm: drop unused 'tries' option
- GitRepository: deprecate the get_remote_repos method
- GitRepository.has_remote_repo: use get_remotes method
- git: new class and method for remote repositories
- debian packaging: change to 1.0 source package format
- Version bump, rebase on top of 0.6.3
  * Disable cover-min-percentage setting of nose
  * docs: minor sgml syntax fix
- rpm tests: slight modificatin of import-srpm tests
- ComponentTestBase: use eq_() ok_() from nose.tools
- tests: add tests for git-import-orig-rpm
- ComponentTestBase: keep tmpdir if GBP_TESTS_NOCLEAN is in env
- ComponentTestBase: fix env restore in teardown
- config: restore mangled env in doctests
- import-orig-rpm: remove unneeded try-except
- import-orig-rpm: don't crash on invalid gbp.conf
- ComponentTestBase: more verbose output in case of branch mismatch
- rpm tests: test --filter option of git-import-srpm
- tests.testutils: add ls_zip() helper
- import-orig: rework sourcecode preparation and filtering
- import-orig: new function for filtering/re-packing sources
- buildpackage: fix handling of empty tarball prefix
- rpm: import orig: import readline in the common module
- import orig: import readline in the common module
- UpstreamSource.unpack: return UpstreamSource instance
- UpstreamSource.pack: reuse unpacked dir if no filter is used
- rpm: UpstreamSource: implement prefix guessing
- UpstreamSource: implement prefix guessing
- UpstreamSource: check that the sources exist
- UpstreamSource: store the absolute path
- rpm: UpstreamSource: move version guessing logic to PkgPolicy
- UpstreamSource: move version guessing logic to PkgPolicy
- UpstreamSource.guess_version: don't check for directories
- Fix `fatal: fetch --all does not take a repository argument`</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 0.6.6" date="1385985600">- Rebase on top of upstream version 0.6.6
- UpstreamSource: fix archive prefix guessing
- pq-rpm: create diff up to the last merge commit
  Before, merge commits broke patch generation, or, (most probably) caused
  the generated patches to be unapplicable (similar to how
  git-format-patch behaves).
  Now, changes up to the last merge commit are squashed into one diff if
  merge commits are found in the revision list from which patches are to
  be generated. Individual patches (one per commit) are generated from the
  last merge commit up to the exported revision.
- pq-rpm: magic word HEAD for patch-squashing
  When given as the squash-point, 'HEAD' translates to the end-commit.
  This allows one to configure gbp to always squash all commits into one
  monolithic diff.</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 0.6.8" date="1389096000">- Rebase on top of upstream version 0.6.8</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen/0.6.8-20140306" date="1394107200">- Rebase on top of upstream version 0.6.8
- Introduce git-rpm-ch tool.
  Initial version of the git-rpm-ch tool which is intended for maintaining
  RPM changelogs. Supports both spec files and separate "OBS style"
  changelog files.
  Implement '--tag' command line option (and other related options for
  signing) for creating and tagging a release. These correspond the
  tagging options in git-buildpackage-rpm.
  The git-buildpackage-rpm tool does not commit anything to git. However,
  in rpm-ch the '--tag' option causes the changelog modifications (and,
  all other staged changes) to be committed to git before creating the
  tag. This makes it possible to create a release and document the
  packaging/release tag name in the rpm changelog.
- Changes to gbp-pq-rpm:
  * implement 'convert' subcommand.
    The new subcommand is intended to be a one-time-callable command for
    converting a package to use the "orphan-packaging" development model and
    git layout (where packaging files are maintained in a separate branch
    and code development in another branch).
  * implement '--import-files' command line option.
    For defining the packaging file(s) that will be imported into the
    development/patch-queue branch.
    By default, the local gbp conf files are imported (so that gbp sees the
    same settings on the development/pq branc as on the packaging branch).
    Files defined with this option will appear as one monolithic commit in
    the development/patch-queue branch.
  * implement --new-packaging-dir cmdline option.
    Used for setting the packaging directory to be used in the new orphan
    packaging branch. Defaults to --packaging-dir so that the gbp.conf files
    are more likely to work without modification.
  * fail gracefully on invalid config files
  * support '%(upstreamversion)s' as a replacable string in the pq branch
    name.
- Changes to git-buildpackage-rpm
  * patch-export from development branch.
    Adds git-buildpackage-rpm --patch-export support for the 'orphan
    packaging' development model (where packaging files and development sources are kept in separate
    branches).
    New functionality:
    1. If patch-export is enabled and gbp detects that the current branch
    has a development/patch-queue branch it exports the patches from there,
    instead of the tip of the packaging branch.
    2. If gbp detects that the current (or exported) branch is a
    development/patch-queue branch it automatically enables patch-export
    and exports packaging files from the base branch (instead of the
    development/patch-queue branch.
    Also, add a new '--git-patch-export-rev' command line option with which
    the user can explicitly set the treeish from which patches are generated
    (i.e. HEAD..&lt;patch-export-rev&gt;)
  * fix spec file vcs update when doing git-tag-only
  * change default export directory.
    So that the git working directory is not dirtied, by default.
- Changes ti git-import-orig-rpm:
  * disable --merge by default.
    Merging upstream to packaging does not usually make sense with rpm
    packages. Merely, it can create confusion cause unapplicable patches to
    be generated.
  * implement --create-missing-branches option.
  * implement automatic downloading.
    Automatically try to download the archive if the archive filename points
    to a remote location.
  * get archive from spec file.
    Try to get archive path/filename from spec file if no file name is given
    on the command line.  This should make version bumps more
    straightforward: just update version number in the spec file and run
    'git-import-orig-rpm'.
- git-import-orig: implement --create-missing-branches option.
- Fixes and new features in GitRepository class
  * GitRepository/get_commit_info: correctly handle file renames/copies.
  * GitRepository.create_branch: add 'force' option
  * GitRepository.archive: add 'paths' option
  * GitRepository/git_command: strip stderr output in case of error.
  * GitRepository/add_remote_repo: fix the 'tags' argument.
  * GitRepository: allow interactive commands.
  * GitRepository: fix the 'edit' mode in commit methods.
  * GitRepository.commit_files: add committer_info and edit arguments.
  * GitRepository.commit_all: add committer_info argument.
- Fixes and new features in internal rpm/spec support
  * rpm.SpecFile: add 'specpath' attribute
  * rpm: correctly handle 'NoSource' and 'NoPatch' tags in spec.
  * rpm: Implement spec_from_repo() helper function
  * rpm: track all "section" directives in spec file.
  * rpm: add gbp.rpm.changelog module.
    This new module contains basic containers and functionality for parsing
    and updating rpm changelogs. It is coupled with the rpm packaging policy
    class which now has definitions for rpm changelog formatting.
  * rpm: support for getting/setting changelog in spec.
    SpecFile objects now support reading and writing of the %changelog
    section.
  * rpm: store full path of spec file sources
- Fix detection of prefix directory in tarballs
  gbs import failed to import tarball properly if paths in the archive
  were prefixed with "./".</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen/0.6.12-20140521" date="1400673600">- Rebase on top of upstream version 0.6.12
- Changes in rpm-ch
  * add --message cmdline option
    For giving the text for new changelog entry/entries, skipping git commit
    messages entirely.
  * implement '--all' option
    If defined, git-rpm-ch uses all commits in the Git history. Also,
    '--since' option is omitted.
  * implement --color-scheme option
  * use name (string) as the entry author
  * internal refactoring
  * fix crash in guessing the start commit
- Changes in pq-rpm
  * implement --retain-history option
    With this option defined gbp tries to preserve the history when
    converting. That is, for each commit in the old branch create one
    corresponding commit in the new orphan packaging branch. This works by
    dumping packaging files and updating patches for each commit. However,
    empty commits are not generated - these are caused e.g. by changes in
    files that are ignored by patch-generation.
    NOTE! Only valid for the 'convert' action.
  * convert: don't try to commit empty set of patches
  * make sure we always get a sane author
  * slight unification of log messages
  * decrease (default) verbosity a bit
  * don't create pq branch when switching
- Changes in buildpackage-rpm
  * buildpackage-rpm: fix desktop notifications
  * buildpackage-rpm: remove --purge option
  * guess/parse spec as early as possible
- Documentation
  * Include man pages in RPM packages
  * Add -doc subpackage to RPM packaging
  * Build deb and rpm html docs in one docbook
  * A multitude of small cosmetic fixes
- Other misc. internal changes
  * GitRepository: implement create_tree() method
  * rpm: suppress some verbosity when updating patches in spec file
  * [ Li Jinjing ] Fix missing return value in get_current_branch method</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen/0.6.15-20140828" date="1409227200">- Rebase on top of upstream version 0.6.15
- Changes in buildpackage-rpm
  * new 'commitish' keyword for spec vcs tag
  * notify: catch RuntimeError when importing pynotify
  * fix exit code in case of GitRepositoryError
  * always create tarball for native packages
  * check submodules from the exported treeish
  * fix crash when running prebuild hook
  * always run cleaner hook
  * add --git-no-build option
  * don't crash on invalid vcs format strings
  * add '--git-native' option
  * remove some outdated/unnecessary exception handling
  * get rid of prepare_export_dir()
  * handle invalid keys in orig prefix
  * internal refactoring and fixes
- Changes in rpm-ch
  * implement --commit option
  * implement --commit-msg option
  * rpm-ch: implement --meta-bts option
  * rpm.policy: don't allow leading whitespace in bts meta tags
- docs: manpages for the rpm tools
- Misc. fixes and features
  * buildpackage: refactor tarball compression
  * gbp-dch: fix handling of the '--meta' option
  * import-orig-rpm: download tarball into parent directory
  * GitRepository/has_submodules: add treeish argument
  * tristate: implement __nonzero__() method
- Logging:
  * don't automatically setup gbp-specific logger
  * fix auto colorizing for custom streams
- Tests
  * multiple fixes and additions in ComponentTestBase class
  * testutils: add directories arg to ls_* functions
  * add unit tests for buildpackage-rpm
- Packaging
  * rpm-packaging: recommend/require unzip
  * recommend/require zipmerge
  * depend/recommend rpmbuild
  * [ Junchun Guan ] Add PKGBUILD to support arch linux
  * [ Li Jinjing ] rpm packaging: use macro for python binary</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen/0.6.22-20150206" date="1423224000">- Rebase on top of upstream version 0.6.22
- Experimental support for BitBake
  * Introduce import-bb tool.
    This is the first tool in an effort of enabling gbp in the BitBake build
    environment. Gbp-import-bb is a tool for importing packages from a
    BitBake-based "combined" distro repository into individual per-package
    Git repositories.
  * Introduce pq-bb tool.
    This is a tool for managing patch-queues for packages maintained in the
    BitBake packaging format (.bb recipes).
  * Introduce buildpackage-bb tool.
    Initial version of the tool for building BitBake packages from Git.
    NOTE: The buildpackage-bb tool itself is able to operate even without an
    initialized BitBake build environment although the build likely fails in
    this case. However, this makes it possible to export the packaging meta
    data, for example.
  * Introcude clone-bb tool.
    This is a new tool for helping to clone remote per-package Git
    repositories when working in BitBake-based "full distro" build
    environment. This is useful in the case that individual packages are
    actually maintained in per-package Git repositories (like Tizen). That
    is, the full distro repository that the developer operates in is
    composed of the packaging meta data from the individual per-package
    repositories. When willing to contribute to a package the developer
    would use clone-bb to clone the correct per-package repository and make
    his changes there.
    NOTE: clone-bb uses GBP_PACKAGING_REPO variable to determine the remote
    repository URI. This variable should be defined in the package recipes
    in order to make clone-bb usable.
  * Introduce submit-bb tool.
    This is a Tizen-specific tool for creating and pushing special submit
    tags.
- pq-rpm: better error message
- buildpackage-rpm: look for remote upstream branches.
  Consider remote branches, too, while looking for the upstream branch
  when trying to guess if a package is native or not.
- rpm packaging changes
  * enable CentOS 7.
  * include python egg-info in -common.
- rpm: suppress stderr when unpacking src.rpm
- UpstreamSource: suppress stderr from tar in _determine_prefix()
- patchseries: strip numbering when guessing subject from filename
- Changes in logging
  * don't propagate to ancestor loggers
  * don't initialize handlers in GbpLogger init.
    Better compatibility with 3rd party modules that have their own logging
    initializations.
- Features/fixes in GitRepository
  * GitRepository/__git_inout: correctly handle input error
  * GitRepository.create_tag: add 'annotate' argument.
    For forcing the creation of annotated tags. Causes the an editor to be
    spawned if no message is given.</changelog>
<changelog author="Jun Wang &lt;junbill.wang@samsung.com&gt; tizen/0.6.27-20160302" date="1456920000">- Upgrade version to 0.6.27</changelog>

</package>
<package pkgid="3a437c92e264cf9b4af0bf4799f9cdacee518683960ddf434d1bf497aa714ca8" name="gbs-remotebuild" arch="noarch">
    <version epoch="0" ver="0.24" rel="1.15.1"/>

<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.9" date="1344859200">- Upgrade to gbs v0.9, which contains the following features:
  * Upgrade to gbs v0.9, which contains the following features:
  * Re-designed gbs config format and parser to support multiple profile more flexible:
  - Use profile oriented style of config
  - Inherited config files supportted, three level support now: /etc/gbs.conf, ~/.gbs.conf
    and $PWD/.gbs.conf
  * integrate depanneur to gbs
  * local full build support, including the following features:
  - Multiple packages build
  - Dependency build
  - Parallel build
  - Incremental build
  * Patch/upstream tarball generation is enabled if "upstream" branch is found
  - If "pristine-tar" branch is found, checkout the orig tarball using pristine-tar
  - If "pristine-tar" branch is NOT found, generate the upstream tarball from a git tag matching the version
  - If the "upstream" branch is NOT found, gbs/gbp uses the current logic
  * If local repo specified, local repo is high priority when selecting packages
  * Code cleanup and refinements.
  * bug fix.</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.10" date="1347969600">- Upgrade to gbs v0.10, which contains the following features:
  * Re-designed gbs config format and parser to support multiple profile more flexible:
  - Use profile oriented style of config
  - Inherited config files supportted, three level support now: /etc/gbs.conf, ~/.gbs.conf
    and $PWD/.gbs.conf
  * integrate depanneur to gbs
  * local full build support, including the following features:
  - Multiple packages build
  - Dependency build
  - Parallel build
  - Incremental build
  * Patch/upstream tarball generation is enabled if "upstream" branch is found
  - If "pristine-tar" branch is found, checkout the orig tarball using pristine-tar
  - If "pristine-tar" branch is NOT found, generate the upstream tarball from a git tag matching the version
  - If the "upstream" branch is NOT found, gbs/gbp uses the current logic
  * If local repo specified, local repo is high priority when selecting packages
  * Remove -A option for gbs chroot, and build root directory must be specified
  * Code cleanup and refinements.
  * bug fix.</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.11" date="1351166400">- Upgrade to gbs v0.11, which contains the following bug fixing &amp; features:
  * Add --spec in 'gbs build' to support building one spec file for packages
    contains multiple spec files.
  * Add --profile/-P in 'gbs build' to support building packages using specified
    profile.
  * support local buildroot configurable in config file. The 'buildroot' can
    be set under the 'general' section as a global setting.
  * more clear and readable error report for gbs build, including gbs export
    error, expansion error and rpmbuild error.
  * bug fix:
  - fix plaintext passwd printed for some error cases
  - fix gbs archive tar ball issue if using user defined macro in spec file
  - fix request passwd again if one package build for a long time(&gt;15 mins)
  - fix sudo timeout issue, which will result in endless loop
  - fix return 0 from depanneur even if error occurs
  - unify display color of debug message in gbs and depanneur
  - fix endless loop if package circle dependency exists
  - fix gbs build error if '~' exist in build root path
  - fix passwd conflict issue with multiple instance of 'gbs build'
  - fix remotebuild can't run in sub-directory issue
  - fix gbs build error with https_proxy trailing '/'
  - fix gbs submit gives no error if there is no comment
  - describe missing dependencies for gbs build
  - support create project outside home:&lt;user&gt; if user have permission
  - fix server's certificate traceback issue for gbs remotebuild</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.11.1" date="1352721600">- Upgrade to gbs v0.11.1, which contains the following bug fixing &amp; features:
  * depend on depanneur 0.2.1 to fix build break issue for 'osc build'</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.12" date="1353844800">* upgrade to gbs v0.12, which contains the following bug fixing &amp; features:
  * support build rpm packages for incremental build
  * --noinit support
  * x86_64 support
  * add --keep-packs to keep unused packages in buildroot
  * show simple progress message for long time operations
  * pristine-tar support
  * patches generation for upstream branch exists
  * add --define option to define macros for rpmbuild
  * no hard code default base project
  * modify changelog order to follow default order of git log
  * change --spec to use only base file name
  * ignore .gbs.conf in patch-generation
  * cmd_import: enable importing patches
  * remove output repo and buildroot info to depanneur
  * bug fix:
  - set TIZEN_BUILD_ROOT as abspath</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.13" date="1358942400">* upgrade to gbs v0.13, which contains the following bug fixing &amp; features:
  * tab completion support
  * five new import options support:
  * --filters: files to filter out during import
  * --allow-same-version: allow to import already imported version
  * --native: A dist native package, no separate upstream
  * --upstream-vcs-tag: upstream VCS tag add to the merge commit
  * --no-patch-export support for export/remotebuild/build modules
  * Re-orgnize and group gbs help information
  * supported arches clean up
  * new subcommands 'clone/pull' added, which can be used for developers
    to clone tizen source code, and upstream/pristine-tar branches can be
    tracked automatically
  * add --tag option for submit module to support group submission
  * bug fix:
  - traceback occurs if specified outdir has no write permission
  - fix misleading error handling while no spec file found
  - break link structure if package is a link in OBS
  - crash if specify a non-exist specfile with --spec option</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.14" date="1361534400">* upgrade to gbs v0.14, which contains the following bug fixing &amp; features:
  * Add --binary-from-file option to specify a package list file
  * Change --binary-list option, accept a packages list separated by comma(,).
  * Add --deps to build specified packages and all packages they depend
  * Add --rdeps to build specified packages and all packages depend on them
  * bug fix:
  - gbs remotebuild does not work with linked package(not branch package)</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.15" date="1364212800">* upgrade to gbs v0.15, which contains the following bug fixing &amp; features:
  * add --baselibs option to support creating -32bit/-64bit/-x86 rpms for
    other arches
  * optimization for local build, especially for local full build
  * support updating multiple spec files in one package in export module
  * dependency upgrade, including qemu,osc,obs-build,crypt-ssleay
  * depend on new osc / osc-build
  * tizen system support
  * more osc api added: linked projects support, project deletion
  * bug fix:
  - consistency issue about package cache and sources
  - spec parser issue on ubuntu system</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.16" date="1368532800">* new subcommands 'createimage/cr' added, which can be used for developers
    to create image using ks file
  * performance optimization
  - put all build roots in a individual directory, which can be mounted as tmpfs
    to speed up building, based on our experimental build time can save 50%. We
    use 800 Tizen packages as test data, without tmpfs, gbs spent about 5 hours
    to build all packages, but with tmpfs enabled, only 2h, 25mins spent
  - avoid export multiple times for packages contain multiple spec files
  - refine createrepo: add --update for if repodata already exists
  - export: use lower compression level for orig tarballs
  * Add statistical of each errors, including export/expansion/rpmbuild errors
  * bug fix:
  - prereqs involved for dependency resolving
  - fix wrong @deps which contain version info
  - quote metacharacters in pattern to fix strip issue if metacharacters exist</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.17" date="1372680000">* upgrade to gbs v0.17, which contains the following bug fixing &amp; features:
  * New gbs config refinements
  - 'work_dir' support in [general] section
  - 'buildconf' support  in each [profile] section, use buildconf to specify
    local build conf
  - string interpolation: ${key} can be used to reference keys defined in
    [general] section
  - 'packaging_branch' support in [general] section, which can be used to
    specify working or development branch, and the default is 'master'
  * Support fetching build conf from standard RPM repodata
  * create debug package by default
  * refinement:
  - report package dependency cycles in time
  - load dependency data during refresh repo, instead of during parsing every
    spec file
  * bug fix:
  - get target arch from build conf if 'Target' is set in build config, which
    make gbs and remote obs generate the same arch for final RPM package
  - exit unexpectedly if cycles exist
  - using higer version in different repo</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.18" date="1377000000">* upgrade to gbs v0.18, which contains the following bug fixing &amp; features:
  * New gbs config refinements
  - offline local full build support for tizen 2.1/2.2/3.0 on tizen.org
  - support CI_CNT and B_CNT OBS
  - zsh completion support
  * bug fix:
  - fix build conf and profile naming limitation: build conf can't contains
    '-' and profile name can't start with digital, like profile.2.1tizen.</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.19" date="1382097600">* upgrade to gbs v0.19, which contains the following bug fixing &amp; features:
  * [build] support comments(#) in binary-list file for --binary-from-file
  * [build] remove previous built rpm and srpm if new version has been built out
  * [remotebuild] split out to separate sub-package: gbs-remotebuild
  * [import] add --upstream-tag option to set customized tag format
  * [export] track upstream/pristine-tar branch automatically, and use upstream
    and pristine-tar branch to generate tar ball.
  * [export] update all spec file if multiple spec files exist, updates
    including insert patches and VCS tag
  * [export] use commit sha1 instead of tag name in spec file VCS tag
  * [clone] add directory argument to gbs clone
  * [submit] support '/' in git branch
  * [conf] overwrite different level of gbs.conf instead of clean up them.
  * [conf] load project special gbs.conf if gitdir specified
  * update dependencies:
  - depanneur &gt;= 0.10
  - pristine-tar &gt;= 1.28
  - librpm-tizen &gt;= 4.11.0.1.tizen20130618-tizen20131001
  - git-buildpackage-rpm &gt;= 0.6.3-tizen20131017</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.20" date="1386676800">* [build] attempt to bypass HTTP caches when fetching repomd.xml
  * [build] generate html &amp; json format report
  * [build] no default upstream-branch option while calling depanneur
  * [build] refine build report summary:
  - add build log dir
  - always print the dirs of final build files
  - add succeeded packages number
  * [build] depend on initvm to register qemu handler
  * [build]add arm 64(aarch64) support
  * [export ]update pristine-tar to fix pristine-tar branch broken issue
  * [doc] refine gbs config and FAQ parts of gbs document
  * update dependencies:
  - depanneur &gt;= 0.10.1
  - build &gt;= 20131112
  - git-buildpackage &gt;= tizen20131202
  - pristine-tar &gt;= 1.28-tizen20131205</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.21" date="1394539200">* [jenkins-job] support two jenkins jobs for local build:
  - local full build jenkins job for build all packages and create images
  - build specified packages list and create images
  * [build] support --package-list and --package-from-file to select pacakges
  * [build] enhance exception caused by proxy
  * [export]clean untracked upstream/pristine-tar branches when export done
  * [doc] enable gbs man page
  * update dependencies:
  - depanneur &gt;= 0.12
  - build &gt;= 20131112
  - git-buildpackage &gt;= 0.6.8-tizen20140306</changelog>
<changelog author="Zhang Qiang &lt;qiang.z.zhang@intel.com&gt; 0.22" date="1400673600">* orphan-packaging development model (experimental)
  - implement 'devel' subcommand for  orphan-packaging development model
  - 'gbs devel' subcommand contains 'start', 'export', 'switch' and
    'convert' actions.
  - updated export/build import subcommands to support new
    orphan-packaging development model
  * conf:
  - make it possible to add new sections
  - make it possible to update an empty conf file
  - support new profile key 'exclude_packages'
  * changelog: utilize rpm-ch from git-buildpackage
  * build: add group metadata to local repodata if package-groups.rpm exists
  * fix Pylint warning</changelog>
<changelog author="Zhang Qiang &lt;qiang.z.zhang@intel.com&gt; 0.22.1" date="1402660800">* export: disable desktop notifications to fix backtrace issue
  * export: change VCS tag in spec to sha1 of commitish
  * build: ignore OS/ABI field in ELF header for aarch64</changelog>
<changelog author="Li Jinjing &lt;jinjingx.li@intel.com&gt; 0.23" date="1413374400">* upgrade to gbs v0.23, which contains the following bug fixing &amp; features:
  * export: support --fallback-to-native command line option to force gbs to
    export non-native packages in native packaging mode
  * export: support native config option by setting default value(yes, true,
    1, enabled, on) in .gbs.conf config file to enable native
    packaging mode in git tree
  * build: support no source rpm building with --skip-srcrpm option
  * build: add new arch mips and mipsel to support MIPS architecture and
    toolchains
  * build: support for distributed compiler network with --icecream option
  * bug fix:
  - build: fix --include-all option on development branch(orphan-packaging
    mode)
  - dependency issue on gbs repository for fedora
  - disable some invalid pylint errors
  * update dependencies:
  - depanneur &gt;= 0.14
  - git-buildpackage &gt;= 0.6.15-tizen20140828</changelog>
<changelog author="Li Jinjing &lt;jinjingx.li@intel.com&gt; 0.23.1" date="1421755200">* upgrade to gbs v0.23.1, which contains the following bug fixing &amp; features:
  * bug fix:
  - build: fix get "fallback_to_native" value from non-default gbs
    configuration
  - fix no jenkins user exists issue when installing gbs-jenkins-scripts and
    gbs-jenkins-jobs packages
  - fix bad indentation from pylint checking
  - fix tag mode in test_import script</changelog>
<changelog author="Dai Lang &lt;langx.dai@intel.com&gt; 0.23.2" date="1422878400">* upgrade to gbs v0.23.2, which contains the following bug fixing &amp; features:
  * bug fix:
  - build: fix get "fallback_to_native" value from non-default gbs
    configuration
  - fix bad indentation from pylint checking
  - fix tag mode in test_import script</changelog>
<changelog author="Wang jun &lt;junbill.wang@samsung.com&gt; 0.24" date="1462190400">* upgrade to gbs v0.24, which contains the following bug fixing &amp; features:
  * bug fix:
  - fix Security issues that normal user can gain root permission with gbs chroot
  - fix  git-build-package bugs and imporve some performance
  * Add --fail-fast option.
  * update dependencies:
  - depanneur &gt;= 0.15</changelog>

</package>
<package pkgid="d77135823be487ce2f57c95471ae726854d349e410634edc21d2408cde367c39" name="repa" arch="noarch">
    <version epoch="0" ver="0.4" rel="1.6.1"/>

<changelog author="Ed Bartosh &lt;eduard.bartosh@intel.com&gt;" date="1376136000">- Initial packaging</changelog>
<changelog author="Ed Bartosh &lt;eduard.bartosh@intel.com&gt; 0.1.1" date="1395144000">- Fixed crash when rejecting broken package
- obs.py: Raise RepaException instead of ObsError
- Catch osc exceptions in obs.py:get_projects. Fixes TINF-480
- Add Submitter and commit id to SR comment. Fixes TINF-468
- Update man page regarding grouping. Fixes TINF-492
- Added docstring to show_images function
- Added obs and download urls to 'repa list' output
- Added --project command line option</changelog>
<changelog author="Ed Bartosh &lt;eduard.bartosh@intel.com&gt; 0.2" date="1400673600">- Implement --processes options for repa list (Fixes: #1762)
- obs/get_projects: retry OBS operations
- Reduce amount of information in repa list output
- Implement repa info (Fixes: #1195)
- Make project mandatory config option (Fixes: #1763)
- Add configuration file info to the man page (Fixes: #1764)
- Mention --section in man page
- Update repa version in the man page
- Update man regarding global options
- Repa list: show correct status for submissions with unresolvable packages
  (Fixes: #1776)
- Minor refactoring of get_status
- Get rid of --regexp command line option (Fixes: #1772)
- Implement Colorizer class
- Implement --colorize option (Fixes: #1765)
- Fixed formatting of output for repa list
- Implemented --showurls option (Fixes: #1789)
- list: Added 'blocked' status
- Added 'waiting for images' status to repa list output
- Fix check for common packages (Fixes: #1847)
- repa info: Fix build status reporting
- Create one SR for all packages in submission (Fixes: #1386)
- obs: Implement get_srs function
- Add -group suffix to the path
- obs.py: Refactored get_project API
- common.py: Introduced get_prerelease_projects API
- Implement repa diff
- Correct man page for accept and reject subcommands
- Convert repa.changes into rpm format
- group: disable publishing when aggregating packages</changelog>
<changelog author="Ed Bartosh &lt;ed@ed.fi.intel.com&gt; 0.3" date="1419249600">- group: disable publishing when aggregating packages
- Skip conflicting submissions when creating a group
- group: Implemented parallel package aggregating (Fixes: #1955)
- info: Excluded 'disabled' build status from the list
- list: Implement --ignore command line option
- create_sr: Fix unicode issue (Fixes: #1979, #TINF-618)
- group: Remove binary package check
- Implement --noaggregate command line and config option (Fixes: #1990)
- List all projects in submitrequest message
- Drop 'Commit' keyword from the submitrequest info
- Reworked repa diff (Fixes: #1869)
- Implement --base option for repa list
- Pylinted codebase
- Output SR for rejected/accepted submissions</changelog>
<changelog author="Ed Bartosh &lt;ed@ed.fi.intel.com&gt; 0.4" date="1457092800">- fix pylint error
- group: remove --force option
- Rename command info -&gt; show
- Implement rebuild subcommand
- Implement lock/unlock subcommand
- Implement remove subcommand
- list: add build time
- Implement --edit command line option</changelog>

</package>
<package pkgid="169fcadd57abe3d9af5c984ea315b6e17116527059d2865f6144289dac7bbf9b" name="gbs-api" arch="noarch">
    <version epoch="0" ver="0.24" rel="1.15.1"/>

<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.9" date="1344859200">- Upgrade to gbs v0.9, which contains the following features:
  * Upgrade to gbs v0.9, which contains the following features:
  * Re-designed gbs config format and parser to support multiple profile more flexible:
  - Use profile oriented style of config
  - Inherited config files supportted, three level support now: /etc/gbs.conf, ~/.gbs.conf
    and $PWD/.gbs.conf
  * integrate depanneur to gbs
  * local full build support, including the following features:
  - Multiple packages build
  - Dependency build
  - Parallel build
  - Incremental build
  * Patch/upstream tarball generation is enabled if "upstream" branch is found
  - If "pristine-tar" branch is found, checkout the orig tarball using pristine-tar
  - If "pristine-tar" branch is NOT found, generate the upstream tarball from a git tag matching the version
  - If the "upstream" branch is NOT found, gbs/gbp uses the current logic
  * If local repo specified, local repo is high priority when selecting packages
  * Code cleanup and refinements.
  * bug fix.</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.10" date="1347969600">- Upgrade to gbs v0.10, which contains the following features:
  * Re-designed gbs config format and parser to support multiple profile more flexible:
  - Use profile oriented style of config
  - Inherited config files supportted, three level support now: /etc/gbs.conf, ~/.gbs.conf
    and $PWD/.gbs.conf
  * integrate depanneur to gbs
  * local full build support, including the following features:
  - Multiple packages build
  - Dependency build
  - Parallel build
  - Incremental build
  * Patch/upstream tarball generation is enabled if "upstream" branch is found
  - If "pristine-tar" branch is found, checkout the orig tarball using pristine-tar
  - If "pristine-tar" branch is NOT found, generate the upstream tarball from a git tag matching the version
  - If the "upstream" branch is NOT found, gbs/gbp uses the current logic
  * If local repo specified, local repo is high priority when selecting packages
  * Remove -A option for gbs chroot, and build root directory must be specified
  * Code cleanup and refinements.
  * bug fix.</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.11" date="1351166400">- Upgrade to gbs v0.11, which contains the following bug fixing &amp; features:
  * Add --spec in 'gbs build' to support building one spec file for packages
    contains multiple spec files.
  * Add --profile/-P in 'gbs build' to support building packages using specified
    profile.
  * support local buildroot configurable in config file. The 'buildroot' can
    be set under the 'general' section as a global setting.
  * more clear and readable error report for gbs build, including gbs export
    error, expansion error and rpmbuild error.
  * bug fix:
  - fix plaintext passwd printed for some error cases
  - fix gbs archive tar ball issue if using user defined macro in spec file
  - fix request passwd again if one package build for a long time(&gt;15 mins)
  - fix sudo timeout issue, which will result in endless loop
  - fix return 0 from depanneur even if error occurs
  - unify display color of debug message in gbs and depanneur
  - fix endless loop if package circle dependency exists
  - fix gbs build error if '~' exist in build root path
  - fix passwd conflict issue with multiple instance of 'gbs build'
  - fix remotebuild can't run in sub-directory issue
  - fix gbs build error with https_proxy trailing '/'
  - fix gbs submit gives no error if there is no comment
  - describe missing dependencies for gbs build
  - support create project outside home:&lt;user&gt; if user have permission
  - fix server's certificate traceback issue for gbs remotebuild</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.11.1" date="1352721600">- Upgrade to gbs v0.11.1, which contains the following bug fixing &amp; features:
  * depend on depanneur 0.2.1 to fix build break issue for 'osc build'</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.12" date="1353844800">* upgrade to gbs v0.12, which contains the following bug fixing &amp; features:
  * support build rpm packages for incremental build
  * --noinit support
  * x86_64 support
  * add --keep-packs to keep unused packages in buildroot
  * show simple progress message for long time operations
  * pristine-tar support
  * patches generation for upstream branch exists
  * add --define option to define macros for rpmbuild
  * no hard code default base project
  * modify changelog order to follow default order of git log
  * change --spec to use only base file name
  * ignore .gbs.conf in patch-generation
  * cmd_import: enable importing patches
  * remove output repo and buildroot info to depanneur
  * bug fix:
  - set TIZEN_BUILD_ROOT as abspath</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.13" date="1358942400">* upgrade to gbs v0.13, which contains the following bug fixing &amp; features:
  * tab completion support
  * five new import options support:
  * --filters: files to filter out during import
  * --allow-same-version: allow to import already imported version
  * --native: A dist native package, no separate upstream
  * --upstream-vcs-tag: upstream VCS tag add to the merge commit
  * --no-patch-export support for export/remotebuild/build modules
  * Re-orgnize and group gbs help information
  * supported arches clean up
  * new subcommands 'clone/pull' added, which can be used for developers
    to clone tizen source code, and upstream/pristine-tar branches can be
    tracked automatically
  * add --tag option for submit module to support group submission
  * bug fix:
  - traceback occurs if specified outdir has no write permission
  - fix misleading error handling while no spec file found
  - break link structure if package is a link in OBS
  - crash if specify a non-exist specfile with --spec option</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.14" date="1361534400">* upgrade to gbs v0.14, which contains the following bug fixing &amp; features:
  * Add --binary-from-file option to specify a package list file
  * Change --binary-list option, accept a packages list separated by comma(,).
  * Add --deps to build specified packages and all packages they depend
  * Add --rdeps to build specified packages and all packages depend on them
  * bug fix:
  - gbs remotebuild does not work with linked package(not branch package)</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.15" date="1364212800">* upgrade to gbs v0.15, which contains the following bug fixing &amp; features:
  * add --baselibs option to support creating -32bit/-64bit/-x86 rpms for
    other arches
  * optimization for local build, especially for local full build
  * support updating multiple spec files in one package in export module
  * dependency upgrade, including qemu,osc,obs-build,crypt-ssleay
  * depend on new osc / osc-build
  * tizen system support
  * more osc api added: linked projects support, project deletion
  * bug fix:
  - consistency issue about package cache and sources
  - spec parser issue on ubuntu system</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.16" date="1368532800">* new subcommands 'createimage/cr' added, which can be used for developers
    to create image using ks file
  * performance optimization
  - put all build roots in a individual directory, which can be mounted as tmpfs
    to speed up building, based on our experimental build time can save 50%. We
    use 800 Tizen packages as test data, without tmpfs, gbs spent about 5 hours
    to build all packages, but with tmpfs enabled, only 2h, 25mins spent
  - avoid export multiple times for packages contain multiple spec files
  - refine createrepo: add --update for if repodata already exists
  - export: use lower compression level for orig tarballs
  * Add statistical of each errors, including export/expansion/rpmbuild errors
  * bug fix:
  - prereqs involved for dependency resolving
  - fix wrong @deps which contain version info
  - quote metacharacters in pattern to fix strip issue if metacharacters exist</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.17" date="1372680000">* upgrade to gbs v0.17, which contains the following bug fixing &amp; features:
  * New gbs config refinements
  - 'work_dir' support in [general] section
  - 'buildconf' support  in each [profile] section, use buildconf to specify
    local build conf
  - string interpolation: ${key} can be used to reference keys defined in
    [general] section
  - 'packaging_branch' support in [general] section, which can be used to
    specify working or development branch, and the default is 'master'
  * Support fetching build conf from standard RPM repodata
  * create debug package by default
  * refinement:
  - report package dependency cycles in time
  - load dependency data during refresh repo, instead of during parsing every
    spec file
  * bug fix:
  - get target arch from build conf if 'Target' is set in build config, which
    make gbs and remote obs generate the same arch for final RPM package
  - exit unexpectedly if cycles exist
  - using higer version in different repo</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.18" date="1377000000">* upgrade to gbs v0.18, which contains the following bug fixing &amp; features:
  * New gbs config refinements
  - offline local full build support for tizen 2.1/2.2/3.0 on tizen.org
  - support CI_CNT and B_CNT OBS
  - zsh completion support
  * bug fix:
  - fix build conf and profile naming limitation: build conf can't contains
    '-' and profile name can't start with digital, like profile.2.1tizen.</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.19" date="1382097600">* upgrade to gbs v0.19, which contains the following bug fixing &amp; features:
  * [build] support comments(#) in binary-list file for --binary-from-file
  * [build] remove previous built rpm and srpm if new version has been built out
  * [remotebuild] split out to separate sub-package: gbs-remotebuild
  * [import] add --upstream-tag option to set customized tag format
  * [export] track upstream/pristine-tar branch automatically, and use upstream
    and pristine-tar branch to generate tar ball.
  * [export] update all spec file if multiple spec files exist, updates
    including insert patches and VCS tag
  * [export] use commit sha1 instead of tag name in spec file VCS tag
  * [clone] add directory argument to gbs clone
  * [submit] support '/' in git branch
  * [conf] overwrite different level of gbs.conf instead of clean up them.
  * [conf] load project special gbs.conf if gitdir specified
  * update dependencies:
  - depanneur &gt;= 0.10
  - pristine-tar &gt;= 1.28
  - librpm-tizen &gt;= 4.11.0.1.tizen20130618-tizen20131001
  - git-buildpackage-rpm &gt;= 0.6.3-tizen20131017</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.20" date="1386676800">* [build] attempt to bypass HTTP caches when fetching repomd.xml
  * [build] generate html &amp; json format report
  * [build] no default upstream-branch option while calling depanneur
  * [build] refine build report summary:
  - add build log dir
  - always print the dirs of final build files
  - add succeeded packages number
  * [build] depend on initvm to register qemu handler
  * [build]add arm 64(aarch64) support
  * [export ]update pristine-tar to fix pristine-tar branch broken issue
  * [doc] refine gbs config and FAQ parts of gbs document
  * update dependencies:
  - depanneur &gt;= 0.10.1
  - build &gt;= 20131112
  - git-buildpackage &gt;= tizen20131202
  - pristine-tar &gt;= 1.28-tizen20131205</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.21" date="1394539200">* [jenkins-job] support two jenkins jobs for local build:
  - local full build jenkins job for build all packages and create images
  - build specified packages list and create images
  * [build] support --package-list and --package-from-file to select pacakges
  * [build] enhance exception caused by proxy
  * [export]clean untracked upstream/pristine-tar branches when export done
  * [doc] enable gbs man page
  * update dependencies:
  - depanneur &gt;= 0.12
  - build &gt;= 20131112
  - git-buildpackage &gt;= 0.6.8-tizen20140306</changelog>
<changelog author="Zhang Qiang &lt;qiang.z.zhang@intel.com&gt; 0.22" date="1400673600">* orphan-packaging development model (experimental)
  - implement 'devel' subcommand for  orphan-packaging development model
  - 'gbs devel' subcommand contains 'start', 'export', 'switch' and
    'convert' actions.
  - updated export/build import subcommands to support new
    orphan-packaging development model
  * conf:
  - make it possible to add new sections
  - make it possible to update an empty conf file
  - support new profile key 'exclude_packages'
  * changelog: utilize rpm-ch from git-buildpackage
  * build: add group metadata to local repodata if package-groups.rpm exists
  * fix Pylint warning</changelog>
<changelog author="Zhang Qiang &lt;qiang.z.zhang@intel.com&gt; 0.22.1" date="1402660800">* export: disable desktop notifications to fix backtrace issue
  * export: change VCS tag in spec to sha1 of commitish
  * build: ignore OS/ABI field in ELF header for aarch64</changelog>
<changelog author="Li Jinjing &lt;jinjingx.li@intel.com&gt; 0.23" date="1413374400">* upgrade to gbs v0.23, which contains the following bug fixing &amp; features:
  * export: support --fallback-to-native command line option to force gbs to
    export non-native packages in native packaging mode
  * export: support native config option by setting default value(yes, true,
    1, enabled, on) in .gbs.conf config file to enable native
    packaging mode in git tree
  * build: support no source rpm building with --skip-srcrpm option
  * build: add new arch mips and mipsel to support MIPS architecture and
    toolchains
  * build: support for distributed compiler network with --icecream option
  * bug fix:
  - build: fix --include-all option on development branch(orphan-packaging
    mode)
  - dependency issue on gbs repository for fedora
  - disable some invalid pylint errors
  * update dependencies:
  - depanneur &gt;= 0.14
  - git-buildpackage &gt;= 0.6.15-tizen20140828</changelog>
<changelog author="Li Jinjing &lt;jinjingx.li@intel.com&gt; 0.23.1" date="1421755200">* upgrade to gbs v0.23.1, which contains the following bug fixing &amp; features:
  * bug fix:
  - build: fix get "fallback_to_native" value from non-default gbs
    configuration
  - fix no jenkins user exists issue when installing gbs-jenkins-scripts and
    gbs-jenkins-jobs packages
  - fix bad indentation from pylint checking
  - fix tag mode in test_import script</changelog>
<changelog author="Dai Lang &lt;langx.dai@intel.com&gt; 0.23.2" date="1422878400">* upgrade to gbs v0.23.2, which contains the following bug fixing &amp; features:
  * bug fix:
  - build: fix get "fallback_to_native" value from non-default gbs
    configuration
  - fix bad indentation from pylint checking
  - fix tag mode in test_import script</changelog>
<changelog author="Wang jun &lt;junbill.wang@samsung.com&gt; 0.24" date="1462190400">* upgrade to gbs v0.24, which contains the following bug fixing &amp; features:
  * bug fix:
  - fix Security issues that normal user can gain root permission with gbs chroot
  - fix  git-build-package bugs and imporve some performance
  * Add --fail-fast option.
  * update dependencies:
  - depanneur &gt;= 0.15</changelog>

</package>
<package pkgid="89b95ed2a794cb48169c157c7ff91d379f7c15e962714080d5ef2653d3d0106a" name="git-buildpackage-doc" arch="noarch">
    <version epoch="0" ver="0.6.27" rel="6.1"/>

<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 0.6.0git20130530" date="1377172800">- rpm: Improve logging in case of rpmlib error
- Add clean method to GitRepository class
- Add all_remotes option in git fetch command
- Add tags option in git push command
- rpm: print a warning if importing gbp-specific librpm fails
- rpm: implement a wrapper module for rpm lib
- rpm: simplify SpecFile._parse_filtered_spec()
- Fix pylint warnings, follow Markus' sugesstion
- rpm: enhance spec parsing error messages
- GitRepository/add_files: consistently update all tracked files
- GitRepository: Add refspec option to fetch method
- GitRepository: Add all option to pull method
- GitRepository: Add force option to push method</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 0.6.3" date="1382011200">- buildpackage: support 'commit' variable for VCS tags
- Clone a repository to a specific directory
- Fix gbs clone failure if repo url is like host:repo.git
- SpecFile.set_tag: change the default place for new tags
- remove 'repo' param to adapt to changes of write_patch_file
- pq: pass commit_info to format_patch()
- pq: pass commit_info to format_patch()
- pq.write_patch_file: drop unused argument
- pq: fix generation of series file
- common/pq: fix length of patch filenames
- buildpackage: refactor prefix handling
- tests: remove unused import in submodule tests
- tests: upper case global variables in submodule tests
- tests: add some docstrings to git submodule tests
- tests: use eq_ and ok_ from nose tools in submodule tests
- tests: use sanitize some submodule tests
- pq-rpm: don't overwrite patches in the same series
- pq: don't overwrite patches in the same series
- rpm: support guessing spec file from git treeish
- rpm.SpecFile: support parsing spec as raw text data
- rpm: minor docstring fixes
- rpm: change guess_spec() to return SpecFile object
- GitRepository.list_tree: add 'paths' option
- common/pq: support more flexible pq-branch naming
- pq-rpm: drop unused 'tries' option
- GitRepository: deprecate the get_remote_repos method
- GitRepository.has_remote_repo: use get_remotes method
- git: new class and method for remote repositories
- debian packaging: change to 1.0 source package format
- Version bump, rebase on top of 0.6.3
  * Disable cover-min-percentage setting of nose
  * docs: minor sgml syntax fix
- rpm tests: slight modificatin of import-srpm tests
- ComponentTestBase: use eq_() ok_() from nose.tools
- tests: add tests for git-import-orig-rpm
- ComponentTestBase: keep tmpdir if GBP_TESTS_NOCLEAN is in env
- ComponentTestBase: fix env restore in teardown
- config: restore mangled env in doctests
- import-orig-rpm: remove unneeded try-except
- import-orig-rpm: don't crash on invalid gbp.conf
- ComponentTestBase: more verbose output in case of branch mismatch
- rpm tests: test --filter option of git-import-srpm
- tests.testutils: add ls_zip() helper
- import-orig: rework sourcecode preparation and filtering
- import-orig: new function for filtering/re-packing sources
- buildpackage: fix handling of empty tarball prefix
- rpm: import orig: import readline in the common module
- import orig: import readline in the common module
- UpstreamSource.unpack: return UpstreamSource instance
- UpstreamSource.pack: reuse unpacked dir if no filter is used
- rpm: UpstreamSource: implement prefix guessing
- UpstreamSource: implement prefix guessing
- UpstreamSource: check that the sources exist
- UpstreamSource: store the absolute path
- rpm: UpstreamSource: move version guessing logic to PkgPolicy
- UpstreamSource: move version guessing logic to PkgPolicy
- UpstreamSource.guess_version: don't check for directories
- Fix `fatal: fetch --all does not take a repository argument`</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 0.6.6" date="1385985600">- Rebase on top of upstream version 0.6.6
- UpstreamSource: fix archive prefix guessing
- pq-rpm: create diff up to the last merge commit
  Before, merge commits broke patch generation, or, (most probably) caused
  the generated patches to be unapplicable (similar to how
  git-format-patch behaves).
  Now, changes up to the last merge commit are squashed into one diff if
  merge commits are found in the revision list from which patches are to
  be generated. Individual patches (one per commit) are generated from the
  last merge commit up to the exported revision.
- pq-rpm: magic word HEAD for patch-squashing
  When given as the squash-point, 'HEAD' translates to the end-commit.
  This allows one to configure gbp to always squash all commits into one
  monolithic diff.</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 0.6.8" date="1389096000">- Rebase on top of upstream version 0.6.8</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen/0.6.8-20140306" date="1394107200">- Rebase on top of upstream version 0.6.8
- Introduce git-rpm-ch tool.
  Initial version of the git-rpm-ch tool which is intended for maintaining
  RPM changelogs. Supports both spec files and separate "OBS style"
  changelog files.
  Implement '--tag' command line option (and other related options for
  signing) for creating and tagging a release. These correspond the
  tagging options in git-buildpackage-rpm.
  The git-buildpackage-rpm tool does not commit anything to git. However,
  in rpm-ch the '--tag' option causes the changelog modifications (and,
  all other staged changes) to be committed to git before creating the
  tag. This makes it possible to create a release and document the
  packaging/release tag name in the rpm changelog.
- Changes to gbp-pq-rpm:
  * implement 'convert' subcommand.
    The new subcommand is intended to be a one-time-callable command for
    converting a package to use the "orphan-packaging" development model and
    git layout (where packaging files are maintained in a separate branch
    and code development in another branch).
  * implement '--import-files' command line option.
    For defining the packaging file(s) that will be imported into the
    development/patch-queue branch.
    By default, the local gbp conf files are imported (so that gbp sees the
    same settings on the development/pq branc as on the packaging branch).
    Files defined with this option will appear as one monolithic commit in
    the development/patch-queue branch.
  * implement --new-packaging-dir cmdline option.
    Used for setting the packaging directory to be used in the new orphan
    packaging branch. Defaults to --packaging-dir so that the gbp.conf files
    are more likely to work without modification.
  * fail gracefully on invalid config files
  * support '%(upstreamversion)s' as a replacable string in the pq branch
    name.
- Changes to git-buildpackage-rpm
  * patch-export from development branch.
    Adds git-buildpackage-rpm --patch-export support for the 'orphan
    packaging' development model (where packaging files and development sources are kept in separate
    branches).
    New functionality:
    1. If patch-export is enabled and gbp detects that the current branch
    has a development/patch-queue branch it exports the patches from there,
    instead of the tip of the packaging branch.
    2. If gbp detects that the current (or exported) branch is a
    development/patch-queue branch it automatically enables patch-export
    and exports packaging files from the base branch (instead of the
    development/patch-queue branch.
    Also, add a new '--git-patch-export-rev' command line option with which
    the user can explicitly set the treeish from which patches are generated
    (i.e. HEAD..&lt;patch-export-rev&gt;)
  * fix spec file vcs update when doing git-tag-only
  * change default export directory.
    So that the git working directory is not dirtied, by default.
- Changes ti git-import-orig-rpm:
  * disable --merge by default.
    Merging upstream to packaging does not usually make sense with rpm
    packages. Merely, it can create confusion cause unapplicable patches to
    be generated.
  * implement --create-missing-branches option.
  * implement automatic downloading.
    Automatically try to download the archive if the archive filename points
    to a remote location.
  * get archive from spec file.
    Try to get archive path/filename from spec file if no file name is given
    on the command line.  This should make version bumps more
    straightforward: just update version number in the spec file and run
    'git-import-orig-rpm'.
- git-import-orig: implement --create-missing-branches option.
- Fixes and new features in GitRepository class
  * GitRepository/get_commit_info: correctly handle file renames/copies.
  * GitRepository.create_branch: add 'force' option
  * GitRepository.archive: add 'paths' option
  * GitRepository/git_command: strip stderr output in case of error.
  * GitRepository/add_remote_repo: fix the 'tags' argument.
  * GitRepository: allow interactive commands.
  * GitRepository: fix the 'edit' mode in commit methods.
  * GitRepository.commit_files: add committer_info and edit arguments.
  * GitRepository.commit_all: add committer_info argument.
- Fixes and new features in internal rpm/spec support
  * rpm.SpecFile: add 'specpath' attribute
  * rpm: correctly handle 'NoSource' and 'NoPatch' tags in spec.
  * rpm: Implement spec_from_repo() helper function
  * rpm: track all "section" directives in spec file.
  * rpm: add gbp.rpm.changelog module.
    This new module contains basic containers and functionality for parsing
    and updating rpm changelogs. It is coupled with the rpm packaging policy
    class which now has definitions for rpm changelog formatting.
  * rpm: support for getting/setting changelog in spec.
    SpecFile objects now support reading and writing of the %changelog
    section.
  * rpm: store full path of spec file sources
- Fix detection of prefix directory in tarballs
  gbs import failed to import tarball properly if paths in the archive
  were prefixed with "./".</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen/0.6.12-20140521" date="1400673600">- Rebase on top of upstream version 0.6.12
- Changes in rpm-ch
  * add --message cmdline option
    For giving the text for new changelog entry/entries, skipping git commit
    messages entirely.
  * implement '--all' option
    If defined, git-rpm-ch uses all commits in the Git history. Also,
    '--since' option is omitted.
  * implement --color-scheme option
  * use name (string) as the entry author
  * internal refactoring
  * fix crash in guessing the start commit
- Changes in pq-rpm
  * implement --retain-history option
    With this option defined gbp tries to preserve the history when
    converting. That is, for each commit in the old branch create one
    corresponding commit in the new orphan packaging branch. This works by
    dumping packaging files and updating patches for each commit. However,
    empty commits are not generated - these are caused e.g. by changes in
    files that are ignored by patch-generation.
    NOTE! Only valid for the 'convert' action.
  * convert: don't try to commit empty set of patches
  * make sure we always get a sane author
  * slight unification of log messages
  * decrease (default) verbosity a bit
  * don't create pq branch when switching
- Changes in buildpackage-rpm
  * buildpackage-rpm: fix desktop notifications
  * buildpackage-rpm: remove --purge option
  * guess/parse spec as early as possible
- Documentation
  * Include man pages in RPM packages
  * Add -doc subpackage to RPM packaging
  * Build deb and rpm html docs in one docbook
  * A multitude of small cosmetic fixes
- Other misc. internal changes
  * GitRepository: implement create_tree() method
  * rpm: suppress some verbosity when updating patches in spec file
  * [ Li Jinjing ] Fix missing return value in get_current_branch method</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen/0.6.15-20140828" date="1409227200">- Rebase on top of upstream version 0.6.15
- Changes in buildpackage-rpm
  * new 'commitish' keyword for spec vcs tag
  * notify: catch RuntimeError when importing pynotify
  * fix exit code in case of GitRepositoryError
  * always create tarball for native packages
  * check submodules from the exported treeish
  * fix crash when running prebuild hook
  * always run cleaner hook
  * add --git-no-build option
  * don't crash on invalid vcs format strings
  * add '--git-native' option
  * remove some outdated/unnecessary exception handling
  * get rid of prepare_export_dir()
  * handle invalid keys in orig prefix
  * internal refactoring and fixes
- Changes in rpm-ch
  * implement --commit option
  * implement --commit-msg option
  * rpm-ch: implement --meta-bts option
  * rpm.policy: don't allow leading whitespace in bts meta tags
- docs: manpages for the rpm tools
- Misc. fixes and features
  * buildpackage: refactor tarball compression
  * gbp-dch: fix handling of the '--meta' option
  * import-orig-rpm: download tarball into parent directory
  * GitRepository/has_submodules: add treeish argument
  * tristate: implement __nonzero__() method
- Logging:
  * don't automatically setup gbp-specific logger
  * fix auto colorizing for custom streams
- Tests
  * multiple fixes and additions in ComponentTestBase class
  * testutils: add directories arg to ls_* functions
  * add unit tests for buildpackage-rpm
- Packaging
  * rpm-packaging: recommend/require unzip
  * recommend/require zipmerge
  * depend/recommend rpmbuild
  * [ Junchun Guan ] Add PKGBUILD to support arch linux
  * [ Li Jinjing ] rpm packaging: use macro for python binary</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen/0.6.22-20150206" date="1423224000">- Rebase on top of upstream version 0.6.22
- Experimental support for BitBake
  * Introduce import-bb tool.
    This is the first tool in an effort of enabling gbp in the BitBake build
    environment. Gbp-import-bb is a tool for importing packages from a
    BitBake-based "combined" distro repository into individual per-package
    Git repositories.
  * Introduce pq-bb tool.
    This is a tool for managing patch-queues for packages maintained in the
    BitBake packaging format (.bb recipes).
  * Introduce buildpackage-bb tool.
    Initial version of the tool for building BitBake packages from Git.
    NOTE: The buildpackage-bb tool itself is able to operate even without an
    initialized BitBake build environment although the build likely fails in
    this case. However, this makes it possible to export the packaging meta
    data, for example.
  * Introcude clone-bb tool.
    This is a new tool for helping to clone remote per-package Git
    repositories when working in BitBake-based "full distro" build
    environment. This is useful in the case that individual packages are
    actually maintained in per-package Git repositories (like Tizen). That
    is, the full distro repository that the developer operates in is
    composed of the packaging meta data from the individual per-package
    repositories. When willing to contribute to a package the developer
    would use clone-bb to clone the correct per-package repository and make
    his changes there.
    NOTE: clone-bb uses GBP_PACKAGING_REPO variable to determine the remote
    repository URI. This variable should be defined in the package recipes
    in order to make clone-bb usable.
  * Introduce submit-bb tool.
    This is a Tizen-specific tool for creating and pushing special submit
    tags.
- pq-rpm: better error message
- buildpackage-rpm: look for remote upstream branches.
  Consider remote branches, too, while looking for the upstream branch
  when trying to guess if a package is native or not.
- rpm packaging changes
  * enable CentOS 7.
  * include python egg-info in -common.
- rpm: suppress stderr when unpacking src.rpm
- UpstreamSource: suppress stderr from tar in _determine_prefix()
- patchseries: strip numbering when guessing subject from filename
- Changes in logging
  * don't propagate to ancestor loggers
  * don't initialize handlers in GbpLogger init.
    Better compatibility with 3rd party modules that have their own logging
    initializations.
- Features/fixes in GitRepository
  * GitRepository/__git_inout: correctly handle input error
  * GitRepository.create_tag: add 'annotate' argument.
    For forcing the creation of annotated tags. Causes the an editor to be
    spawned if no message is given.</changelog>
<changelog author="Jun Wang &lt;junbill.wang@samsung.com&gt; tizen/0.6.27-20160302" date="1456920000">- Upgrade version to 0.6.27</changelog>

</package>
<package pkgid="7d61bfd52280b81b9ae4e70ae08426d46bbe0c61dde2055ad983dcc56ecc1a70" name="gbs-jenkins-scripts" arch="noarch">
    <version epoch="0" ver="0.24" rel="1.15.1"/>

<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.9" date="1344859200">- Upgrade to gbs v0.9, which contains the following features:
  * Upgrade to gbs v0.9, which contains the following features:
  * Re-designed gbs config format and parser to support multiple profile more flexible:
  - Use profile oriented style of config
  - Inherited config files supportted, three level support now: /etc/gbs.conf, ~/.gbs.conf
    and $PWD/.gbs.conf
  * integrate depanneur to gbs
  * local full build support, including the following features:
  - Multiple packages build
  - Dependency build
  - Parallel build
  - Incremental build
  * Patch/upstream tarball generation is enabled if "upstream" branch is found
  - If "pristine-tar" branch is found, checkout the orig tarball using pristine-tar
  - If "pristine-tar" branch is NOT found, generate the upstream tarball from a git tag matching the version
  - If the "upstream" branch is NOT found, gbs/gbp uses the current logic
  * If local repo specified, local repo is high priority when selecting packages
  * Code cleanup and refinements.
  * bug fix.</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.10" date="1347969600">- Upgrade to gbs v0.10, which contains the following features:
  * Re-designed gbs config format and parser to support multiple profile more flexible:
  - Use profile oriented style of config
  - Inherited config files supportted, three level support now: /etc/gbs.conf, ~/.gbs.conf
    and $PWD/.gbs.conf
  * integrate depanneur to gbs
  * local full build support, including the following features:
  - Multiple packages build
  - Dependency build
  - Parallel build
  - Incremental build
  * Patch/upstream tarball generation is enabled if "upstream" branch is found
  - If "pristine-tar" branch is found, checkout the orig tarball using pristine-tar
  - If "pristine-tar" branch is NOT found, generate the upstream tarball from a git tag matching the version
  - If the "upstream" branch is NOT found, gbs/gbp uses the current logic
  * If local repo specified, local repo is high priority when selecting packages
  * Remove -A option for gbs chroot, and build root directory must be specified
  * Code cleanup and refinements.
  * bug fix.</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.11" date="1351166400">- Upgrade to gbs v0.11, which contains the following bug fixing &amp; features:
  * Add --spec in 'gbs build' to support building one spec file for packages
    contains multiple spec files.
  * Add --profile/-P in 'gbs build' to support building packages using specified
    profile.
  * support local buildroot configurable in config file. The 'buildroot' can
    be set under the 'general' section as a global setting.
  * more clear and readable error report for gbs build, including gbs export
    error, expansion error and rpmbuild error.
  * bug fix:
  - fix plaintext passwd printed for some error cases
  - fix gbs archive tar ball issue if using user defined macro in spec file
  - fix request passwd again if one package build for a long time(&gt;15 mins)
  - fix sudo timeout issue, which will result in endless loop
  - fix return 0 from depanneur even if error occurs
  - unify display color of debug message in gbs and depanneur
  - fix endless loop if package circle dependency exists
  - fix gbs build error if '~' exist in build root path
  - fix passwd conflict issue with multiple instance of 'gbs build'
  - fix remotebuild can't run in sub-directory issue
  - fix gbs build error with https_proxy trailing '/'
  - fix gbs submit gives no error if there is no comment
  - describe missing dependencies for gbs build
  - support create project outside home:&lt;user&gt; if user have permission
  - fix server's certificate traceback issue for gbs remotebuild</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.11.1" date="1352721600">- Upgrade to gbs v0.11.1, which contains the following bug fixing &amp; features:
  * depend on depanneur 0.2.1 to fix build break issue for 'osc build'</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.12" date="1353844800">* upgrade to gbs v0.12, which contains the following bug fixing &amp; features:
  * support build rpm packages for incremental build
  * --noinit support
  * x86_64 support
  * add --keep-packs to keep unused packages in buildroot
  * show simple progress message for long time operations
  * pristine-tar support
  * patches generation for upstream branch exists
  * add --define option to define macros for rpmbuild
  * no hard code default base project
  * modify changelog order to follow default order of git log
  * change --spec to use only base file name
  * ignore .gbs.conf in patch-generation
  * cmd_import: enable importing patches
  * remove output repo and buildroot info to depanneur
  * bug fix:
  - set TIZEN_BUILD_ROOT as abspath</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.13" date="1358942400">* upgrade to gbs v0.13, which contains the following bug fixing &amp; features:
  * tab completion support
  * five new import options support:
  * --filters: files to filter out during import
  * --allow-same-version: allow to import already imported version
  * --native: A dist native package, no separate upstream
  * --upstream-vcs-tag: upstream VCS tag add to the merge commit
  * --no-patch-export support for export/remotebuild/build modules
  * Re-orgnize and group gbs help information
  * supported arches clean up
  * new subcommands 'clone/pull' added, which can be used for developers
    to clone tizen source code, and upstream/pristine-tar branches can be
    tracked automatically
  * add --tag option for submit module to support group submission
  * bug fix:
  - traceback occurs if specified outdir has no write permission
  - fix misleading error handling while no spec file found
  - break link structure if package is a link in OBS
  - crash if specify a non-exist specfile with --spec option</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.14" date="1361534400">* upgrade to gbs v0.14, which contains the following bug fixing &amp; features:
  * Add --binary-from-file option to specify a package list file
  * Change --binary-list option, accept a packages list separated by comma(,).
  * Add --deps to build specified packages and all packages they depend
  * Add --rdeps to build specified packages and all packages depend on them
  * bug fix:
  - gbs remotebuild does not work with linked package(not branch package)</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.15" date="1364212800">* upgrade to gbs v0.15, which contains the following bug fixing &amp; features:
  * add --baselibs option to support creating -32bit/-64bit/-x86 rpms for
    other arches
  * optimization for local build, especially for local full build
  * support updating multiple spec files in one package in export module
  * dependency upgrade, including qemu,osc,obs-build,crypt-ssleay
  * depend on new osc / osc-build
  * tizen system support
  * more osc api added: linked projects support, project deletion
  * bug fix:
  - consistency issue about package cache and sources
  - spec parser issue on ubuntu system</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.16" date="1368532800">* new subcommands 'createimage/cr' added, which can be used for developers
    to create image using ks file
  * performance optimization
  - put all build roots in a individual directory, which can be mounted as tmpfs
    to speed up building, based on our experimental build time can save 50%. We
    use 800 Tizen packages as test data, without tmpfs, gbs spent about 5 hours
    to build all packages, but with tmpfs enabled, only 2h, 25mins spent
  - avoid export multiple times for packages contain multiple spec files
  - refine createrepo: add --update for if repodata already exists
  - export: use lower compression level for orig tarballs
  * Add statistical of each errors, including export/expansion/rpmbuild errors
  * bug fix:
  - prereqs involved for dependency resolving
  - fix wrong @deps which contain version info
  - quote metacharacters in pattern to fix strip issue if metacharacters exist</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.17" date="1372680000">* upgrade to gbs v0.17, which contains the following bug fixing &amp; features:
  * New gbs config refinements
  - 'work_dir' support in [general] section
  - 'buildconf' support  in each [profile] section, use buildconf to specify
    local build conf
  - string interpolation: ${key} can be used to reference keys defined in
    [general] section
  - 'packaging_branch' support in [general] section, which can be used to
    specify working or development branch, and the default is 'master'
  * Support fetching build conf from standard RPM repodata
  * create debug package by default
  * refinement:
  - report package dependency cycles in time
  - load dependency data during refresh repo, instead of during parsing every
    spec file
  * bug fix:
  - get target arch from build conf if 'Target' is set in build config, which
    make gbs and remote obs generate the same arch for final RPM package
  - exit unexpectedly if cycles exist
  - using higer version in different repo</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.18" date="1377000000">* upgrade to gbs v0.18, which contains the following bug fixing &amp; features:
  * New gbs config refinements
  - offline local full build support for tizen 2.1/2.2/3.0 on tizen.org
  - support CI_CNT and B_CNT OBS
  - zsh completion support
  * bug fix:
  - fix build conf and profile naming limitation: build conf can't contains
    '-' and profile name can't start with digital, like profile.2.1tizen.</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.19" date="1382097600">* upgrade to gbs v0.19, which contains the following bug fixing &amp; features:
  * [build] support comments(#) in binary-list file for --binary-from-file
  * [build] remove previous built rpm and srpm if new version has been built out
  * [remotebuild] split out to separate sub-package: gbs-remotebuild
  * [import] add --upstream-tag option to set customized tag format
  * [export] track upstream/pristine-tar branch automatically, and use upstream
    and pristine-tar branch to generate tar ball.
  * [export] update all spec file if multiple spec files exist, updates
    including insert patches and VCS tag
  * [export] use commit sha1 instead of tag name in spec file VCS tag
  * [clone] add directory argument to gbs clone
  * [submit] support '/' in git branch
  * [conf] overwrite different level of gbs.conf instead of clean up them.
  * [conf] load project special gbs.conf if gitdir specified
  * update dependencies:
  - depanneur &gt;= 0.10
  - pristine-tar &gt;= 1.28
  - librpm-tizen &gt;= 4.11.0.1.tizen20130618-tizen20131001
  - git-buildpackage-rpm &gt;= 0.6.3-tizen20131017</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.20" date="1386676800">* [build] attempt to bypass HTTP caches when fetching repomd.xml
  * [build] generate html &amp; json format report
  * [build] no default upstream-branch option while calling depanneur
  * [build] refine build report summary:
  - add build log dir
  - always print the dirs of final build files
  - add succeeded packages number
  * [build] depend on initvm to register qemu handler
  * [build]add arm 64(aarch64) support
  * [export ]update pristine-tar to fix pristine-tar branch broken issue
  * [doc] refine gbs config and FAQ parts of gbs document
  * update dependencies:
  - depanneur &gt;= 0.10.1
  - build &gt;= 20131112
  - git-buildpackage &gt;= tizen20131202
  - pristine-tar &gt;= 1.28-tizen20131205</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.21" date="1394539200">* [jenkins-job] support two jenkins jobs for local build:
  - local full build jenkins job for build all packages and create images
  - build specified packages list and create images
  * [build] support --package-list and --package-from-file to select pacakges
  * [build] enhance exception caused by proxy
  * [export]clean untracked upstream/pristine-tar branches when export done
  * [doc] enable gbs man page
  * update dependencies:
  - depanneur &gt;= 0.12
  - build &gt;= 20131112
  - git-buildpackage &gt;= 0.6.8-tizen20140306</changelog>
<changelog author="Zhang Qiang &lt;qiang.z.zhang@intel.com&gt; 0.22" date="1400673600">* orphan-packaging development model (experimental)
  - implement 'devel' subcommand for  orphan-packaging development model
  - 'gbs devel' subcommand contains 'start', 'export', 'switch' and
    'convert' actions.
  - updated export/build import subcommands to support new
    orphan-packaging development model
  * conf:
  - make it possible to add new sections
  - make it possible to update an empty conf file
  - support new profile key 'exclude_packages'
  * changelog: utilize rpm-ch from git-buildpackage
  * build: add group metadata to local repodata if package-groups.rpm exists
  * fix Pylint warning</changelog>
<changelog author="Zhang Qiang &lt;qiang.z.zhang@intel.com&gt; 0.22.1" date="1402660800">* export: disable desktop notifications to fix backtrace issue
  * export: change VCS tag in spec to sha1 of commitish
  * build: ignore OS/ABI field in ELF header for aarch64</changelog>
<changelog author="Li Jinjing &lt;jinjingx.li@intel.com&gt; 0.23" date="1413374400">* upgrade to gbs v0.23, which contains the following bug fixing &amp; features:
  * export: support --fallback-to-native command line option to force gbs to
    export non-native packages in native packaging mode
  * export: support native config option by setting default value(yes, true,
    1, enabled, on) in .gbs.conf config file to enable native
    packaging mode in git tree
  * build: support no source rpm building with --skip-srcrpm option
  * build: add new arch mips and mipsel to support MIPS architecture and
    toolchains
  * build: support for distributed compiler network with --icecream option
  * bug fix:
  - build: fix --include-all option on development branch(orphan-packaging
    mode)
  - dependency issue on gbs repository for fedora
  - disable some invalid pylint errors
  * update dependencies:
  - depanneur &gt;= 0.14
  - git-buildpackage &gt;= 0.6.15-tizen20140828</changelog>
<changelog author="Li Jinjing &lt;jinjingx.li@intel.com&gt; 0.23.1" date="1421755200">* upgrade to gbs v0.23.1, which contains the following bug fixing &amp; features:
  * bug fix:
  - build: fix get "fallback_to_native" value from non-default gbs
    configuration
  - fix no jenkins user exists issue when installing gbs-jenkins-scripts and
    gbs-jenkins-jobs packages
  - fix bad indentation from pylint checking
  - fix tag mode in test_import script</changelog>
<changelog author="Dai Lang &lt;langx.dai@intel.com&gt; 0.23.2" date="1422878400">* upgrade to gbs v0.23.2, which contains the following bug fixing &amp; features:
  * bug fix:
  - build: fix get "fallback_to_native" value from non-default gbs
    configuration
  - fix bad indentation from pylint checking
  - fix tag mode in test_import script</changelog>
<changelog author="Wang jun &lt;junbill.wang@samsung.com&gt; 0.24" date="1462190400">* upgrade to gbs v0.24, which contains the following bug fixing &amp; features:
  * bug fix:
  - fix Security issues that normal user can gain root permission with gbs chroot
  - fix  git-build-package bugs and imporve some performance
  * Add --fail-fast option.
  * update dependencies:
  - depanneur &gt;= 0.15</changelog>

</package>
<package pkgid="c1f362f885bae839684803613316a547943d8305651eb71974fbf4f45e30cf1e" name="gbs-export" arch="noarch">
    <version epoch="0" ver="0.24" rel="1.15.1"/>

<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.9" date="1344859200">- Upgrade to gbs v0.9, which contains the following features:
  * Upgrade to gbs v0.9, which contains the following features:
  * Re-designed gbs config format and parser to support multiple profile more flexible:
  - Use profile oriented style of config
  - Inherited config files supportted, three level support now: /etc/gbs.conf, ~/.gbs.conf
    and $PWD/.gbs.conf
  * integrate depanneur to gbs
  * local full build support, including the following features:
  - Multiple packages build
  - Dependency build
  - Parallel build
  - Incremental build
  * Patch/upstream tarball generation is enabled if "upstream" branch is found
  - If "pristine-tar" branch is found, checkout the orig tarball using pristine-tar
  - If "pristine-tar" branch is NOT found, generate the upstream tarball from a git tag matching the version
  - If the "upstream" branch is NOT found, gbs/gbp uses the current logic
  * If local repo specified, local repo is high priority when selecting packages
  * Code cleanup and refinements.
  * bug fix.</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.10" date="1347969600">- Upgrade to gbs v0.10, which contains the following features:
  * Re-designed gbs config format and parser to support multiple profile more flexible:
  - Use profile oriented style of config
  - Inherited config files supportted, three level support now: /etc/gbs.conf, ~/.gbs.conf
    and $PWD/.gbs.conf
  * integrate depanneur to gbs
  * local full build support, including the following features:
  - Multiple packages build
  - Dependency build
  - Parallel build
  - Incremental build
  * Patch/upstream tarball generation is enabled if "upstream" branch is found
  - If "pristine-tar" branch is found, checkout the orig tarball using pristine-tar
  - If "pristine-tar" branch is NOT found, generate the upstream tarball from a git tag matching the version
  - If the "upstream" branch is NOT found, gbs/gbp uses the current logic
  * If local repo specified, local repo is high priority when selecting packages
  * Remove -A option for gbs chroot, and build root directory must be specified
  * Code cleanup and refinements.
  * bug fix.</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.11" date="1351166400">- Upgrade to gbs v0.11, which contains the following bug fixing &amp; features:
  * Add --spec in 'gbs build' to support building one spec file for packages
    contains multiple spec files.
  * Add --profile/-P in 'gbs build' to support building packages using specified
    profile.
  * support local buildroot configurable in config file. The 'buildroot' can
    be set under the 'general' section as a global setting.
  * more clear and readable error report for gbs build, including gbs export
    error, expansion error and rpmbuild error.
  * bug fix:
  - fix plaintext passwd printed for some error cases
  - fix gbs archive tar ball issue if using user defined macro in spec file
  - fix request passwd again if one package build for a long time(&gt;15 mins)
  - fix sudo timeout issue, which will result in endless loop
  - fix return 0 from depanneur even if error occurs
  - unify display color of debug message in gbs and depanneur
  - fix endless loop if package circle dependency exists
  - fix gbs build error if '~' exist in build root path
  - fix passwd conflict issue with multiple instance of 'gbs build'
  - fix remotebuild can't run in sub-directory issue
  - fix gbs build error with https_proxy trailing '/'
  - fix gbs submit gives no error if there is no comment
  - describe missing dependencies for gbs build
  - support create project outside home:&lt;user&gt; if user have permission
  - fix server's certificate traceback issue for gbs remotebuild</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.11.1" date="1352721600">- Upgrade to gbs v0.11.1, which contains the following bug fixing &amp; features:
  * depend on depanneur 0.2.1 to fix build break issue for 'osc build'</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.12" date="1353844800">* upgrade to gbs v0.12, which contains the following bug fixing &amp; features:
  * support build rpm packages for incremental build
  * --noinit support
  * x86_64 support
  * add --keep-packs to keep unused packages in buildroot
  * show simple progress message for long time operations
  * pristine-tar support
  * patches generation for upstream branch exists
  * add --define option to define macros for rpmbuild
  * no hard code default base project
  * modify changelog order to follow default order of git log
  * change --spec to use only base file name
  * ignore .gbs.conf in patch-generation
  * cmd_import: enable importing patches
  * remove output repo and buildroot info to depanneur
  * bug fix:
  - set TIZEN_BUILD_ROOT as abspath</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.13" date="1358942400">* upgrade to gbs v0.13, which contains the following bug fixing &amp; features:
  * tab completion support
  * five new import options support:
  * --filters: files to filter out during import
  * --allow-same-version: allow to import already imported version
  * --native: A dist native package, no separate upstream
  * --upstream-vcs-tag: upstream VCS tag add to the merge commit
  * --no-patch-export support for export/remotebuild/build modules
  * Re-orgnize and group gbs help information
  * supported arches clean up
  * new subcommands 'clone/pull' added, which can be used for developers
    to clone tizen source code, and upstream/pristine-tar branches can be
    tracked automatically
  * add --tag option for submit module to support group submission
  * bug fix:
  - traceback occurs if specified outdir has no write permission
  - fix misleading error handling while no spec file found
  - break link structure if package is a link in OBS
  - crash if specify a non-exist specfile with --spec option</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.14" date="1361534400">* upgrade to gbs v0.14, which contains the following bug fixing &amp; features:
  * Add --binary-from-file option to specify a package list file
  * Change --binary-list option, accept a packages list separated by comma(,).
  * Add --deps to build specified packages and all packages they depend
  * Add --rdeps to build specified packages and all packages depend on them
  * bug fix:
  - gbs remotebuild does not work with linked package(not branch package)</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.15" date="1364212800">* upgrade to gbs v0.15, which contains the following bug fixing &amp; features:
  * add --baselibs option to support creating -32bit/-64bit/-x86 rpms for
    other arches
  * optimization for local build, especially for local full build
  * support updating multiple spec files in one package in export module
  * dependency upgrade, including qemu,osc,obs-build,crypt-ssleay
  * depend on new osc / osc-build
  * tizen system support
  * more osc api added: linked projects support, project deletion
  * bug fix:
  - consistency issue about package cache and sources
  - spec parser issue on ubuntu system</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.16" date="1368532800">* new subcommands 'createimage/cr' added, which can be used for developers
    to create image using ks file
  * performance optimization
  - put all build roots in a individual directory, which can be mounted as tmpfs
    to speed up building, based on our experimental build time can save 50%. We
    use 800 Tizen packages as test data, without tmpfs, gbs spent about 5 hours
    to build all packages, but with tmpfs enabled, only 2h, 25mins spent
  - avoid export multiple times for packages contain multiple spec files
  - refine createrepo: add --update for if repodata already exists
  - export: use lower compression level for orig tarballs
  * Add statistical of each errors, including export/expansion/rpmbuild errors
  * bug fix:
  - prereqs involved for dependency resolving
  - fix wrong @deps which contain version info
  - quote metacharacters in pattern to fix strip issue if metacharacters exist</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.17" date="1372680000">* upgrade to gbs v0.17, which contains the following bug fixing &amp; features:
  * New gbs config refinements
  - 'work_dir' support in [general] section
  - 'buildconf' support  in each [profile] section, use buildconf to specify
    local build conf
  - string interpolation: ${key} can be used to reference keys defined in
    [general] section
  - 'packaging_branch' support in [general] section, which can be used to
    specify working or development branch, and the default is 'master'
  * Support fetching build conf from standard RPM repodata
  * create debug package by default
  * refinement:
  - report package dependency cycles in time
  - load dependency data during refresh repo, instead of during parsing every
    spec file
  * bug fix:
  - get target arch from build conf if 'Target' is set in build config, which
    make gbs and remote obs generate the same arch for final RPM package
  - exit unexpectedly if cycles exist
  - using higer version in different repo</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.18" date="1377000000">* upgrade to gbs v0.18, which contains the following bug fixing &amp; features:
  * New gbs config refinements
  - offline local full build support for tizen 2.1/2.2/3.0 on tizen.org
  - support CI_CNT and B_CNT OBS
  - zsh completion support
  * bug fix:
  - fix build conf and profile naming limitation: build conf can't contains
    '-' and profile name can't start with digital, like profile.2.1tizen.</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.19" date="1382097600">* upgrade to gbs v0.19, which contains the following bug fixing &amp; features:
  * [build] support comments(#) in binary-list file for --binary-from-file
  * [build] remove previous built rpm and srpm if new version has been built out
  * [remotebuild] split out to separate sub-package: gbs-remotebuild
  * [import] add --upstream-tag option to set customized tag format
  * [export] track upstream/pristine-tar branch automatically, and use upstream
    and pristine-tar branch to generate tar ball.
  * [export] update all spec file if multiple spec files exist, updates
    including insert patches and VCS tag
  * [export] use commit sha1 instead of tag name in spec file VCS tag
  * [clone] add directory argument to gbs clone
  * [submit] support '/' in git branch
  * [conf] overwrite different level of gbs.conf instead of clean up them.
  * [conf] load project special gbs.conf if gitdir specified
  * update dependencies:
  - depanneur &gt;= 0.10
  - pristine-tar &gt;= 1.28
  - librpm-tizen &gt;= 4.11.0.1.tizen20130618-tizen20131001
  - git-buildpackage-rpm &gt;= 0.6.3-tizen20131017</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.20" date="1386676800">* [build] attempt to bypass HTTP caches when fetching repomd.xml
  * [build] generate html &amp; json format report
  * [build] no default upstream-branch option while calling depanneur
  * [build] refine build report summary:
  - add build log dir
  - always print the dirs of final build files
  - add succeeded packages number
  * [build] depend on initvm to register qemu handler
  * [build]add arm 64(aarch64) support
  * [export ]update pristine-tar to fix pristine-tar branch broken issue
  * [doc] refine gbs config and FAQ parts of gbs document
  * update dependencies:
  - depanneur &gt;= 0.10.1
  - build &gt;= 20131112
  - git-buildpackage &gt;= tizen20131202
  - pristine-tar &gt;= 1.28-tizen20131205</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.21" date="1394539200">* [jenkins-job] support two jenkins jobs for local build:
  - local full build jenkins job for build all packages and create images
  - build specified packages list and create images
  * [build] support --package-list and --package-from-file to select pacakges
  * [build] enhance exception caused by proxy
  * [export]clean untracked upstream/pristine-tar branches when export done
  * [doc] enable gbs man page
  * update dependencies:
  - depanneur &gt;= 0.12
  - build &gt;= 20131112
  - git-buildpackage &gt;= 0.6.8-tizen20140306</changelog>
<changelog author="Zhang Qiang &lt;qiang.z.zhang@intel.com&gt; 0.22" date="1400673600">* orphan-packaging development model (experimental)
  - implement 'devel' subcommand for  orphan-packaging development model
  - 'gbs devel' subcommand contains 'start', 'export', 'switch' and
    'convert' actions.
  - updated export/build import subcommands to support new
    orphan-packaging development model
  * conf:
  - make it possible to add new sections
  - make it possible to update an empty conf file
  - support new profile key 'exclude_packages'
  * changelog: utilize rpm-ch from git-buildpackage
  * build: add group metadata to local repodata if package-groups.rpm exists
  * fix Pylint warning</changelog>
<changelog author="Zhang Qiang &lt;qiang.z.zhang@intel.com&gt; 0.22.1" date="1402660800">* export: disable desktop notifications to fix backtrace issue
  * export: change VCS tag in spec to sha1 of commitish
  * build: ignore OS/ABI field in ELF header for aarch64</changelog>
<changelog author="Li Jinjing &lt;jinjingx.li@intel.com&gt; 0.23" date="1413374400">* upgrade to gbs v0.23, which contains the following bug fixing &amp; features:
  * export: support --fallback-to-native command line option to force gbs to
    export non-native packages in native packaging mode
  * export: support native config option by setting default value(yes, true,
    1, enabled, on) in .gbs.conf config file to enable native
    packaging mode in git tree
  * build: support no source rpm building with --skip-srcrpm option
  * build: add new arch mips and mipsel to support MIPS architecture and
    toolchains
  * build: support for distributed compiler network with --icecream option
  * bug fix:
  - build: fix --include-all option on development branch(orphan-packaging
    mode)
  - dependency issue on gbs repository for fedora
  - disable some invalid pylint errors
  * update dependencies:
  - depanneur &gt;= 0.14
  - git-buildpackage &gt;= 0.6.15-tizen20140828</changelog>
<changelog author="Li Jinjing &lt;jinjingx.li@intel.com&gt; 0.23.1" date="1421755200">* upgrade to gbs v0.23.1, which contains the following bug fixing &amp; features:
  * bug fix:
  - build: fix get "fallback_to_native" value from non-default gbs
    configuration
  - fix no jenkins user exists issue when installing gbs-jenkins-scripts and
    gbs-jenkins-jobs packages
  - fix bad indentation from pylint checking
  - fix tag mode in test_import script</changelog>
<changelog author="Dai Lang &lt;langx.dai@intel.com&gt; 0.23.2" date="1422878400">* upgrade to gbs v0.23.2, which contains the following bug fixing &amp; features:
  * bug fix:
  - build: fix get "fallback_to_native" value from non-default gbs
    configuration
  - fix bad indentation from pylint checking
  - fix tag mode in test_import script</changelog>
<changelog author="Wang jun &lt;junbill.wang@samsung.com&gt; 0.24" date="1462190400">* upgrade to gbs v0.24, which contains the following bug fixing &amp; features:
  * bug fix:
  - fix Security issues that normal user can gain root permission with gbs chroot
  - fix  git-build-package bugs and imporve some performance
  * Add --fail-fast option.
  * update dependencies:
  - depanneur &gt;= 0.15</changelog>

</package>
<package pkgid="e354680d2e27dca1bdac8d3140e518ed914aec45b93ea0a2a5d4d014fca48e4e" name="mic" arch="noarch">
    <version epoch="0" ver="0.27" rel="7.1"/>

<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.6" date="1329393600">- Release 0.6, changes including:
  - give hint when converted image existed
  - conf.py: proxy scheme check
  - space check before copy image
  - zypp: abort with error msg for repo resolver issues
  - runner.py refinement
  - ks file syntax check for '%post' without '%end'
  - support more compression formats than only bzip2
  - fix msg NoneType issue, causing exit after install
  - bootstrap:
  - catch creator error when retrieving bootstrap metadata
  - correct matching .metadata file in bootstrap</changelog>
<changelog author="Jian-feng Ding &lt;jian-feng.ding@intel.com&gt; - 0.7" date="1330689600">- Release 0.7, changes including:
  - zypp backend: fixed a fatal issue of unreleasable loop devs
  - zypp backend: more friendly output message
  - backend: share cached rpm files between yum and zypp
  - enhancement for multiple partition loop format
  - make msger to accept Unicode string
  - fixed a regression of compress option for FS format
  - fixed issues in openSUSE12.1
  - new written man page</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.8" date="1332763200">- Release 0.8, changes including:
  - partition alignment support
  - remove bootloader option 'quiet vga' for raw
  - update dist files in git source
  - update unittest, add cases for chroot, msger, runner
  - add 40 system test case for help
  - rewrite loop device allocation mechanism</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.9" date="1334318400">- Release 0.9, changes including:
  - support pre-install package with zypp backend
  - sync /etc/mic/mic.conf to bootstrap
  - enhance sorting for version comparsion in zypp
  - rewrite chroot tar image using xml format mount point file
  - fix the incorrect number showing in fs src pkgs download
  - remove tests directory for dist in Makefile
  - fix liveusb parted mkpart failure, revert mbr size expand in raw
  - cleanup /tmp/repolic* dir in the EULA checking</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.10" date="1337083200">- Release 0.10.4, changes including:
  - container support using '%attachment' section in ks
  - add --compress-to option to support zip format in loop image
  - auto-detect config and plugindir to meet virtualenv and customized install
  - remove all hardcoded info in setup.py and use sys.prefix for installing
  - tolerate some OS errors in the image configurations stage
  - extra patch:
  - fix zypp missing password when using username passwd
  - some fixes to enhance authentication url
  - refine repostr structure to fix comma issue in baseurl</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.11" date="1339156800">- Release 0.11, changes including:
  - support new subcmd 'auto' to handle magic line in ks
  - enhance the handle of authentication url and https proxy
  - support packing images together and support compressed file format
  - reset LD_PRELOAD for chroot env
  - centralized interface to check existing images
  - avoid live image creating when using multi-partitions
  - resolve the depends of python-urlgrabber
  - bug fix:
  - fix logfile context lost issue
  - fix attachment package url handling
  - fix mic ch raw failed issue</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.12" date="1340193600">- Release 0.12, changes including:
  - use default value when @BUILD_ID@ and @ARCH@ not specified
  - enhance proxy support in attachment retrieve
  - add new --shrink opt for loop image to control img shrinking
  - avoid invalid literal for loop device generation
  - relocate and refactor selinux_check func
  - remove prefix for make install
  - bug fix:
  - fix compres image in raw image
  - fix src pkgs download failed issue
  - fix convert failed issue</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.13" date="1342094400">- Release 0.13, changes including:
  - create logfile as default when --release specifid
  - use 'gzip' and 'bzip2' to pack image instead of python
  - automatically detect path of 'env' for chroot
  - record version and os info in build log and logfile
  - bug fix:
  - fix popup message in ubuntus
  - fix unicode issue for logfile
  - better fix for 'chroot raw' issue</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.14" date="1343908800">- Release 0.14, changes including:
  - use cached metadata when checksum is not changed
  - skip non-fatal error in ks file and prompt user to handle
  - prompt user to handle when failed to apply img configure
  - replace hard name with device uuid in etc/fstab
  - enhance extlinux cfg file for symbolic kernel like IVI
  - support label assign for raw image
  - bug fix:
  - fix live image create failure when label assigned
  - avoid traceback when converting unsupported type
  - fix mic --version ugly output</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.15" date="1346414400">- Release 0.15, changes including:
  - new bootstrap implementation: use bootstrap as default
  - enable 'pkgmgr=auto' to use auto-selected backend
  - just warning in chroot when not Tizen/MeeGo chroot dir
  - remove username and password in zypp repo file
  - update usage.rst for man page
  - bug fix:
  - fix https proxy issue in yum backend
  - fix repodata checksum failed issue
  - avoid traceback when loopback is NoneType</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.16" date="1359547200">- add GPT support for UEFI format
  - add --ptable=gpt option in kickstart to enable GPT
  - add simple GPT parser to parse PARTUUID
  - use PARTUUID in syslinux.cfg if gpt required
  - clean up the mess code and improve readability
  - improve alignment to reduce unused space
  - add interface add_disks for PartitionedMount
  - clean up the mess code in partitionfs.py
  - append timestamp suffix to image name by default
  - add a new option --nocache in kickstart to disable caching rpm
  - add a new value 'vcs' for --record-pkgs to save VCS info
  - add a new option --fstab-entry for raw image to set fstab entry
  - introduce a new option '--install-pkgs' in mic
  - valid values imagined: source, debuginfo, debugsource
  - enable 'debuginfo' to install '-debuginfo' rpm in the meantime
  - improve loop device generating and cleaning mechanism
  - code clean:
  - update documentation
  - rename MANIFEST to MD5SUM
  - clean up moblin stuff in kickstart
  - clean mic tests and keep only unittest
  - sepreate the download related as independent module
  - bug fix:
  - cleanup zypp credential file to fix conflicts during installing
  - fix the issue that outdir/cachedir is not dir
  - recalculate package content recording
  - refactor try except statement in baseimager
  - fix existing loop images overwritten</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.17" date="1362052800">- support new distribution Fedora 18
  - enable to handle more than 3 partitions
  - support partitions without mount point
  - move vcs infomation from .vcs to .packages
  - clean up some mess in utils/misc.py
  - bug fix:
  - fix failure when symbolic link vmlinuz in single disk
  - fix incorrect alignment handling
  - fix requires squashfs in opensuse
  - fix unicode error in myurlgrab
  - code cleanup:
  - clean up some mess in utils/misc.py
  - clean up pylint issue in creator.py</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.18" date="1364990400">- put build_id before image name for release option
  - mount build directory as tmpfs to speed up
  - enable --priority in ks to set priority
  - upgrade qemu (mic's depends) to 1.4.0
  - bug fix:
  - fix debuginfo rpm swig attribute lost
  - fix release option failure with slash
  - fix man page lost in some distros
  - fix bmap file packed to tarball
  - code cleanup:
  - unify import statements to absolute import
  - clean up many undefined in partitionfs.py/loop.py/livecd.py
  - clean up some useless try and raise blocks
  - clean up some bad indentations
  - improve some error messages</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.19" date="1368705600">- new distribution support: Ubuntu 13.04 and openSUSE 12.3
  - introduce '--part-type' to handle GPT partition
  - copy bmap creation from bmap-tools
  - update some depends and fix depends issue
  - bug fix:
  - fix bug autologinuser always set
  - fix symlink bind mount left issue
  - fix '/var/lock' non-existent throw traceback</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.20" date="1372680000">* new distribution support: CentOS 6
  * drop image creation if checked packages not present in image
  * introduce 'installerfw' command in kickstart to customize configuration
  * improve output message of post scripts
  * bug fix:
  - fix rpm not support 'VCS' tag traceback</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.21" date="1377518400">* new distribution support: Fedora 19
  * refactor chroot module to correct the logic
  * add an alias for installerfw - installerfw_plugins
  * remove fuser dependency to avoid some unmount issue
  * enable proxy setting with authentication
  * don't get proxy info from /etc/sysconfig/proxy ever
  * kill processes inside chroot after post script running
  * bug fix:
  - fix bootloader options omitted
  - raise when incorrectly set partition flags 'legacy_boot'
  - fix wrong file descriptor issue
  - fix some requires</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.22" date="1382616000">* use __version__ variable instead of VERSION file
  * refactor msger module to ulitize logging module
  * refine error class module
  * improve installation in virtualenv
  * add bash completion support
  * add zsh completion support
  * export mapper device related to installer framework
  * update BmapCreate to the latest version
  * bug fix:
  - fix customized plugin_dir not work in bootstrap
  - fix packing process exit on Ubuntu
  - fix loop device alloaction failed on openSUSE
  - fix incorrect number showing during installing
  - set owner of cacheidr/outdir to SUDO_USER
  - correct project url in setup.py
  - fix mic not work when mic.conf disappear</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.23" date="1386849600">* new distribution support: Ubuntu 13.10 and OpenSUSE 13.1
  * split requirements to subpackage 'mic-native' to reduce mic's dependencies
  * support arm64 architecture image creation in native mode
  * new option '--interactive'/'--non-interactive' to enable/disable interaction
  * new option '--uuid' for 'part' in ks file to set filesystem uuid
  * export more variables related to installer framework for loop format
  * bug fix:
  - fix bootstrap handling if bootstrap package failed
  - fix 'mapper_device' key error
  - fix detailed error messages missing in mounting
  - fix version comparing issue of urlgrabber in Fedora</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.24" date="1394539200">* enhance to handle password with special characters
  * change python-zypp require to python-zypp-tizen
  * add --repo comand option for local build
  * add --user and --password option for %repo directive of ks file
  * clean up some codes relevant to EULA agreement
  * add hostname showing in log
  * bug fix:
  - fix chroot failed by space in image not enough
  - fix obsolete packages incorrect handling
  - fix yum backend failed to cache packages
  - fix bare ip in no_proxy not working
  - fix repeated log showing with yum backend
  - fix loop device latency timing
  - fix zypp failed to download by changing 'cachedir'
  - fix 'mkfs' not working caused by mic-bootstrap install failed</changelog>
<changelog author="Jianzhong Fang &lt;jz.fang@samsung.com&gt; - 0.27" date="1459166400">* new distribution support: CentOS 7, Debian 8, Fedora 21,
    Fedora 22, openSUSE 13.2
  * generate manifest file to describe image information
  * refactor archive and compress module
  * support sparse handle for tar command
  * replace system V with systemd on locale setting
  * add qcow2 image format support
  * add strict mode for package installing
  * enable ssl_verify option in config file
  * enhance checksums of outputs: md5sum, sha1sum, sha256sum (#DEVT-224)
  * drop mic-native support (#DEVT-248)
  * update mount option
  * revert bind mount config file to instroot
  * drop liveusb, livecd and raw image formats support (#DEVT-243, #DEVT-263)
  * use argparse module to parse the cmd line (#DEVT-52)
  * bug fix:
  - fix logfile incomplete in release option
  - fix config file disappear in bootstrap
  - fix aarch64 bin_format
  - fix pylint
  - fix real path of device mapper causing initrd failure
  - fix qemu arm and arm64 issues
  - fix AttributeError in zypp backend
  - fix 'python-xml' depends used by cElements
  - fix xml requirements
  - fix logfile not in release of '--release' when creation failed
  - fix copyright missing issue
  - fix syslinux installation path issue in Arch Linux
  - fix priority option of ks file not apply (#DEVT-254)
  - fix need to check loop device after excute 'losetup --find'
  - fix check scriptlet error file on /tmp/.postscript/error/
  - fix broken tar archive</changelog>

</package>
<package pkgid="f1b7166bcdfb58e85893c2c2c2a1517a5483437470dbb7978b6fe7657ab969a3" name="gbs-jenkins-jobs" arch="noarch">
    <version epoch="0" ver="0.24" rel="1.15.1"/>

<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.9" date="1344859200">- Upgrade to gbs v0.9, which contains the following features:
  * Upgrade to gbs v0.9, which contains the following features:
  * Re-designed gbs config format and parser to support multiple profile more flexible:
  - Use profile oriented style of config
  - Inherited config files supportted, three level support now: /etc/gbs.conf, ~/.gbs.conf
    and $PWD/.gbs.conf
  * integrate depanneur to gbs
  * local full build support, including the following features:
  - Multiple packages build
  - Dependency build
  - Parallel build
  - Incremental build
  * Patch/upstream tarball generation is enabled if "upstream" branch is found
  - If "pristine-tar" branch is found, checkout the orig tarball using pristine-tar
  - If "pristine-tar" branch is NOT found, generate the upstream tarball from a git tag matching the version
  - If the "upstream" branch is NOT found, gbs/gbp uses the current logic
  * If local repo specified, local repo is high priority when selecting packages
  * Code cleanup and refinements.
  * bug fix.</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.10" date="1347969600">- Upgrade to gbs v0.10, which contains the following features:
  * Re-designed gbs config format and parser to support multiple profile more flexible:
  - Use profile oriented style of config
  - Inherited config files supportted, three level support now: /etc/gbs.conf, ~/.gbs.conf
    and $PWD/.gbs.conf
  * integrate depanneur to gbs
  * local full build support, including the following features:
  - Multiple packages build
  - Dependency build
  - Parallel build
  - Incremental build
  * Patch/upstream tarball generation is enabled if "upstream" branch is found
  - If "pristine-tar" branch is found, checkout the orig tarball using pristine-tar
  - If "pristine-tar" branch is NOT found, generate the upstream tarball from a git tag matching the version
  - If the "upstream" branch is NOT found, gbs/gbp uses the current logic
  * If local repo specified, local repo is high priority when selecting packages
  * Remove -A option for gbs chroot, and build root directory must be specified
  * Code cleanup and refinements.
  * bug fix.</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.11" date="1351166400">- Upgrade to gbs v0.11, which contains the following bug fixing &amp; features:
  * Add --spec in 'gbs build' to support building one spec file for packages
    contains multiple spec files.
  * Add --profile/-P in 'gbs build' to support building packages using specified
    profile.
  * support local buildroot configurable in config file. The 'buildroot' can
    be set under the 'general' section as a global setting.
  * more clear and readable error report for gbs build, including gbs export
    error, expansion error and rpmbuild error.
  * bug fix:
  - fix plaintext passwd printed for some error cases
  - fix gbs archive tar ball issue if using user defined macro in spec file
  - fix request passwd again if one package build for a long time(&gt;15 mins)
  - fix sudo timeout issue, which will result in endless loop
  - fix return 0 from depanneur even if error occurs
  - unify display color of debug message in gbs and depanneur
  - fix endless loop if package circle dependency exists
  - fix gbs build error if '~' exist in build root path
  - fix passwd conflict issue with multiple instance of 'gbs build'
  - fix remotebuild can't run in sub-directory issue
  - fix gbs build error with https_proxy trailing '/'
  - fix gbs submit gives no error if there is no comment
  - describe missing dependencies for gbs build
  - support create project outside home:&lt;user&gt; if user have permission
  - fix server's certificate traceback issue for gbs remotebuild</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.11.1" date="1352721600">- Upgrade to gbs v0.11.1, which contains the following bug fixing &amp; features:
  * depend on depanneur 0.2.1 to fix build break issue for 'osc build'</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.12" date="1353844800">* upgrade to gbs v0.12, which contains the following bug fixing &amp; features:
  * support build rpm packages for incremental build
  * --noinit support
  * x86_64 support
  * add --keep-packs to keep unused packages in buildroot
  * show simple progress message for long time operations
  * pristine-tar support
  * patches generation for upstream branch exists
  * add --define option to define macros for rpmbuild
  * no hard code default base project
  * modify changelog order to follow default order of git log
  * change --spec to use only base file name
  * ignore .gbs.conf in patch-generation
  * cmd_import: enable importing patches
  * remove output repo and buildroot info to depanneur
  * bug fix:
  - set TIZEN_BUILD_ROOT as abspath</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.13" date="1358942400">* upgrade to gbs v0.13, which contains the following bug fixing &amp; features:
  * tab completion support
  * five new import options support:
  * --filters: files to filter out during import
  * --allow-same-version: allow to import already imported version
  * --native: A dist native package, no separate upstream
  * --upstream-vcs-tag: upstream VCS tag add to the merge commit
  * --no-patch-export support for export/remotebuild/build modules
  * Re-orgnize and group gbs help information
  * supported arches clean up
  * new subcommands 'clone/pull' added, which can be used for developers
    to clone tizen source code, and upstream/pristine-tar branches can be
    tracked automatically
  * add --tag option for submit module to support group submission
  * bug fix:
  - traceback occurs if specified outdir has no write permission
  - fix misleading error handling while no spec file found
  - break link structure if package is a link in OBS
  - crash if specify a non-exist specfile with --spec option</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.14" date="1361534400">* upgrade to gbs v0.14, which contains the following bug fixing &amp; features:
  * Add --binary-from-file option to specify a package list file
  * Change --binary-list option, accept a packages list separated by comma(,).
  * Add --deps to build specified packages and all packages they depend
  * Add --rdeps to build specified packages and all packages depend on them
  * bug fix:
  - gbs remotebuild does not work with linked package(not branch package)</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.15" date="1364212800">* upgrade to gbs v0.15, which contains the following bug fixing &amp; features:
  * add --baselibs option to support creating -32bit/-64bit/-x86 rpms for
    other arches
  * optimization for local build, especially for local full build
  * support updating multiple spec files in one package in export module
  * dependency upgrade, including qemu,osc,obs-build,crypt-ssleay
  * depend on new osc / osc-build
  * tizen system support
  * more osc api added: linked projects support, project deletion
  * bug fix:
  - consistency issue about package cache and sources
  - spec parser issue on ubuntu system</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.16" date="1368532800">* new subcommands 'createimage/cr' added, which can be used for developers
    to create image using ks file
  * performance optimization
  - put all build roots in a individual directory, which can be mounted as tmpfs
    to speed up building, based on our experimental build time can save 50%. We
    use 800 Tizen packages as test data, without tmpfs, gbs spent about 5 hours
    to build all packages, but with tmpfs enabled, only 2h, 25mins spent
  - avoid export multiple times for packages contain multiple spec files
  - refine createrepo: add --update for if repodata already exists
  - export: use lower compression level for orig tarballs
  * Add statistical of each errors, including export/expansion/rpmbuild errors
  * bug fix:
  - prereqs involved for dependency resolving
  - fix wrong @deps which contain version info
  - quote metacharacters in pattern to fix strip issue if metacharacters exist</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.17" date="1372680000">* upgrade to gbs v0.17, which contains the following bug fixing &amp; features:
  * New gbs config refinements
  - 'work_dir' support in [general] section
  - 'buildconf' support  in each [profile] section, use buildconf to specify
    local build conf
  - string interpolation: ${key} can be used to reference keys defined in
    [general] section
  - 'packaging_branch' support in [general] section, which can be used to
    specify working or development branch, and the default is 'master'
  * Support fetching build conf from standard RPM repodata
  * create debug package by default
  * refinement:
  - report package dependency cycles in time
  - load dependency data during refresh repo, instead of during parsing every
    spec file
  * bug fix:
  - get target arch from build conf if 'Target' is set in build config, which
    make gbs and remote obs generate the same arch for final RPM package
  - exit unexpectedly if cycles exist
  - using higer version in different repo</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.18" date="1377000000">* upgrade to gbs v0.18, which contains the following bug fixing &amp; features:
  * New gbs config refinements
  - offline local full build support for tizen 2.1/2.2/3.0 on tizen.org
  - support CI_CNT and B_CNT OBS
  - zsh completion support
  * bug fix:
  - fix build conf and profile naming limitation: build conf can't contains
    '-' and profile name can't start with digital, like profile.2.1tizen.</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.19" date="1382097600">* upgrade to gbs v0.19, which contains the following bug fixing &amp; features:
  * [build] support comments(#) in binary-list file for --binary-from-file
  * [build] remove previous built rpm and srpm if new version has been built out
  * [remotebuild] split out to separate sub-package: gbs-remotebuild
  * [import] add --upstream-tag option to set customized tag format
  * [export] track upstream/pristine-tar branch automatically, and use upstream
    and pristine-tar branch to generate tar ball.
  * [export] update all spec file if multiple spec files exist, updates
    including insert patches and VCS tag
  * [export] use commit sha1 instead of tag name in spec file VCS tag
  * [clone] add directory argument to gbs clone
  * [submit] support '/' in git branch
  * [conf] overwrite different level of gbs.conf instead of clean up them.
  * [conf] load project special gbs.conf if gitdir specified
  * update dependencies:
  - depanneur &gt;= 0.10
  - pristine-tar &gt;= 1.28
  - librpm-tizen &gt;= 4.11.0.1.tizen20130618-tizen20131001
  - git-buildpackage-rpm &gt;= 0.6.3-tizen20131017</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.20" date="1386676800">* [build] attempt to bypass HTTP caches when fetching repomd.xml
  * [build] generate html &amp; json format report
  * [build] no default upstream-branch option while calling depanneur
  * [build] refine build report summary:
  - add build log dir
  - always print the dirs of final build files
  - add succeeded packages number
  * [build] depend on initvm to register qemu handler
  * [build]add arm 64(aarch64) support
  * [export ]update pristine-tar to fix pristine-tar branch broken issue
  * [doc] refine gbs config and FAQ parts of gbs document
  * update dependencies:
  - depanneur &gt;= 0.10.1
  - build &gt;= 20131112
  - git-buildpackage &gt;= tizen20131202
  - pristine-tar &gt;= 1.28-tizen20131205</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.21" date="1394539200">* [jenkins-job] support two jenkins jobs for local build:
  - local full build jenkins job for build all packages and create images
  - build specified packages list and create images
  * [build] support --package-list and --package-from-file to select pacakges
  * [build] enhance exception caused by proxy
  * [export]clean untracked upstream/pristine-tar branches when export done
  * [doc] enable gbs man page
  * update dependencies:
  - depanneur &gt;= 0.12
  - build &gt;= 20131112
  - git-buildpackage &gt;= 0.6.8-tizen20140306</changelog>
<changelog author="Zhang Qiang &lt;qiang.z.zhang@intel.com&gt; 0.22" date="1400673600">* orphan-packaging development model (experimental)
  - implement 'devel' subcommand for  orphan-packaging development model
  - 'gbs devel' subcommand contains 'start', 'export', 'switch' and
    'convert' actions.
  - updated export/build import subcommands to support new
    orphan-packaging development model
  * conf:
  - make it possible to add new sections
  - make it possible to update an empty conf file
  - support new profile key 'exclude_packages'
  * changelog: utilize rpm-ch from git-buildpackage
  * build: add group metadata to local repodata if package-groups.rpm exists
  * fix Pylint warning</changelog>
<changelog author="Zhang Qiang &lt;qiang.z.zhang@intel.com&gt; 0.22.1" date="1402660800">* export: disable desktop notifications to fix backtrace issue
  * export: change VCS tag in spec to sha1 of commitish
  * build: ignore OS/ABI field in ELF header for aarch64</changelog>
<changelog author="Li Jinjing &lt;jinjingx.li@intel.com&gt; 0.23" date="1413374400">* upgrade to gbs v0.23, which contains the following bug fixing &amp; features:
  * export: support --fallback-to-native command line option to force gbs to
    export non-native packages in native packaging mode
  * export: support native config option by setting default value(yes, true,
    1, enabled, on) in .gbs.conf config file to enable native
    packaging mode in git tree
  * build: support no source rpm building with --skip-srcrpm option
  * build: add new arch mips and mipsel to support MIPS architecture and
    toolchains
  * build: support for distributed compiler network with --icecream option
  * bug fix:
  - build: fix --include-all option on development branch(orphan-packaging
    mode)
  - dependency issue on gbs repository for fedora
  - disable some invalid pylint errors
  * update dependencies:
  - depanneur &gt;= 0.14
  - git-buildpackage &gt;= 0.6.15-tizen20140828</changelog>
<changelog author="Li Jinjing &lt;jinjingx.li@intel.com&gt; 0.23.1" date="1421755200">* upgrade to gbs v0.23.1, which contains the following bug fixing &amp; features:
  * bug fix:
  - build: fix get "fallback_to_native" value from non-default gbs
    configuration
  - fix no jenkins user exists issue when installing gbs-jenkins-scripts and
    gbs-jenkins-jobs packages
  - fix bad indentation from pylint checking
  - fix tag mode in test_import script</changelog>
<changelog author="Dai Lang &lt;langx.dai@intel.com&gt; 0.23.2" date="1422878400">* upgrade to gbs v0.23.2, which contains the following bug fixing &amp; features:
  * bug fix:
  - build: fix get "fallback_to_native" value from non-default gbs
    configuration
  - fix bad indentation from pylint checking
  - fix tag mode in test_import script</changelog>
<changelog author="Wang jun &lt;junbill.wang@samsung.com&gt; 0.24" date="1462190400">* upgrade to gbs v0.24, which contains the following bug fixing &amp; features:
  * bug fix:
  - fix Security issues that normal user can gain root permission with gbs chroot
  - fix  git-build-package bugs and imporve some performance
  * Add --fail-fast option.
  * update dependencies:
  - depanneur &gt;= 0.15</changelog>

</package>
<package pkgid="4acbb591ad8c44ead5276ae5bd0f3b2ce8497d7edcd254a00bbd2dd26c759d4b" name="git-buildpackage-rpm" arch="noarch">
    <version epoch="0" ver="0.6.27" rel="6.1"/>

<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 0.6.0git20130530" date="1377172800">- rpm: Improve logging in case of rpmlib error
- Add clean method to GitRepository class
- Add all_remotes option in git fetch command
- Add tags option in git push command
- rpm: print a warning if importing gbp-specific librpm fails
- rpm: implement a wrapper module for rpm lib
- rpm: simplify SpecFile._parse_filtered_spec()
- Fix pylint warnings, follow Markus' sugesstion
- rpm: enhance spec parsing error messages
- GitRepository/add_files: consistently update all tracked files
- GitRepository: Add refspec option to fetch method
- GitRepository: Add all option to pull method
- GitRepository: Add force option to push method</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 0.6.3" date="1382011200">- buildpackage: support 'commit' variable for VCS tags
- Clone a repository to a specific directory
- Fix gbs clone failure if repo url is like host:repo.git
- SpecFile.set_tag: change the default place for new tags
- remove 'repo' param to adapt to changes of write_patch_file
- pq: pass commit_info to format_patch()
- pq: pass commit_info to format_patch()
- pq.write_patch_file: drop unused argument
- pq: fix generation of series file
- common/pq: fix length of patch filenames
- buildpackage: refactor prefix handling
- tests: remove unused import in submodule tests
- tests: upper case global variables in submodule tests
- tests: add some docstrings to git submodule tests
- tests: use eq_ and ok_ from nose tools in submodule tests
- tests: use sanitize some submodule tests
- pq-rpm: don't overwrite patches in the same series
- pq: don't overwrite patches in the same series
- rpm: support guessing spec file from git treeish
- rpm.SpecFile: support parsing spec as raw text data
- rpm: minor docstring fixes
- rpm: change guess_spec() to return SpecFile object
- GitRepository.list_tree: add 'paths' option
- common/pq: support more flexible pq-branch naming
- pq-rpm: drop unused 'tries' option
- GitRepository: deprecate the get_remote_repos method
- GitRepository.has_remote_repo: use get_remotes method
- git: new class and method for remote repositories
- debian packaging: change to 1.0 source package format
- Version bump, rebase on top of 0.6.3
  * Disable cover-min-percentage setting of nose
  * docs: minor sgml syntax fix
- rpm tests: slight modificatin of import-srpm tests
- ComponentTestBase: use eq_() ok_() from nose.tools
- tests: add tests for git-import-orig-rpm
- ComponentTestBase: keep tmpdir if GBP_TESTS_NOCLEAN is in env
- ComponentTestBase: fix env restore in teardown
- config: restore mangled env in doctests
- import-orig-rpm: remove unneeded try-except
- import-orig-rpm: don't crash on invalid gbp.conf
- ComponentTestBase: more verbose output in case of branch mismatch
- rpm tests: test --filter option of git-import-srpm
- tests.testutils: add ls_zip() helper
- import-orig: rework sourcecode preparation and filtering
- import-orig: new function for filtering/re-packing sources
- buildpackage: fix handling of empty tarball prefix
- rpm: import orig: import readline in the common module
- import orig: import readline in the common module
- UpstreamSource.unpack: return UpstreamSource instance
- UpstreamSource.pack: reuse unpacked dir if no filter is used
- rpm: UpstreamSource: implement prefix guessing
- UpstreamSource: implement prefix guessing
- UpstreamSource: check that the sources exist
- UpstreamSource: store the absolute path
- rpm: UpstreamSource: move version guessing logic to PkgPolicy
- UpstreamSource: move version guessing logic to PkgPolicy
- UpstreamSource.guess_version: don't check for directories
- Fix `fatal: fetch --all does not take a repository argument`</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 0.6.6" date="1385985600">- Rebase on top of upstream version 0.6.6
- UpstreamSource: fix archive prefix guessing
- pq-rpm: create diff up to the last merge commit
  Before, merge commits broke patch generation, or, (most probably) caused
  the generated patches to be unapplicable (similar to how
  git-format-patch behaves).
  Now, changes up to the last merge commit are squashed into one diff if
  merge commits are found in the revision list from which patches are to
  be generated. Individual patches (one per commit) are generated from the
  last merge commit up to the exported revision.
- pq-rpm: magic word HEAD for patch-squashing
  When given as the squash-point, 'HEAD' translates to the end-commit.
  This allows one to configure gbp to always squash all commits into one
  monolithic diff.</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 0.6.8" date="1389096000">- Rebase on top of upstream version 0.6.8</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen/0.6.8-20140306" date="1394107200">- Rebase on top of upstream version 0.6.8
- Introduce git-rpm-ch tool.
  Initial version of the git-rpm-ch tool which is intended for maintaining
  RPM changelogs. Supports both spec files and separate "OBS style"
  changelog files.
  Implement '--tag' command line option (and other related options for
  signing) for creating and tagging a release. These correspond the
  tagging options in git-buildpackage-rpm.
  The git-buildpackage-rpm tool does not commit anything to git. However,
  in rpm-ch the '--tag' option causes the changelog modifications (and,
  all other staged changes) to be committed to git before creating the
  tag. This makes it possible to create a release and document the
  packaging/release tag name in the rpm changelog.
- Changes to gbp-pq-rpm:
  * implement 'convert' subcommand.
    The new subcommand is intended to be a one-time-callable command for
    converting a package to use the "orphan-packaging" development model and
    git layout (where packaging files are maintained in a separate branch
    and code development in another branch).
  * implement '--import-files' command line option.
    For defining the packaging file(s) that will be imported into the
    development/patch-queue branch.
    By default, the local gbp conf files are imported (so that gbp sees the
    same settings on the development/pq branc as on the packaging branch).
    Files defined with this option will appear as one monolithic commit in
    the development/patch-queue branch.
  * implement --new-packaging-dir cmdline option.
    Used for setting the packaging directory to be used in the new orphan
    packaging branch. Defaults to --packaging-dir so that the gbp.conf files
    are more likely to work without modification.
  * fail gracefully on invalid config files
  * support '%(upstreamversion)s' as a replacable string in the pq branch
    name.
- Changes to git-buildpackage-rpm
  * patch-export from development branch.
    Adds git-buildpackage-rpm --patch-export support for the 'orphan
    packaging' development model (where packaging files and development sources are kept in separate
    branches).
    New functionality:
    1. If patch-export is enabled and gbp detects that the current branch
    has a development/patch-queue branch it exports the patches from there,
    instead of the tip of the packaging branch.
    2. If gbp detects that the current (or exported) branch is a
    development/patch-queue branch it automatically enables patch-export
    and exports packaging files from the base branch (instead of the
    development/patch-queue branch.
    Also, add a new '--git-patch-export-rev' command line option with which
    the user can explicitly set the treeish from which patches are generated
    (i.e. HEAD..&lt;patch-export-rev&gt;)
  * fix spec file vcs update when doing git-tag-only
  * change default export directory.
    So that the git working directory is not dirtied, by default.
- Changes ti git-import-orig-rpm:
  * disable --merge by default.
    Merging upstream to packaging does not usually make sense with rpm
    packages. Merely, it can create confusion cause unapplicable patches to
    be generated.
  * implement --create-missing-branches option.
  * implement automatic downloading.
    Automatically try to download the archive if the archive filename points
    to a remote location.
  * get archive from spec file.
    Try to get archive path/filename from spec file if no file name is given
    on the command line.  This should make version bumps more
    straightforward: just update version number in the spec file and run
    'git-import-orig-rpm'.
- git-import-orig: implement --create-missing-branches option.
- Fixes and new features in GitRepository class
  * GitRepository/get_commit_info: correctly handle file renames/copies.
  * GitRepository.create_branch: add 'force' option
  * GitRepository.archive: add 'paths' option
  * GitRepository/git_command: strip stderr output in case of error.
  * GitRepository/add_remote_repo: fix the 'tags' argument.
  * GitRepository: allow interactive commands.
  * GitRepository: fix the 'edit' mode in commit methods.
  * GitRepository.commit_files: add committer_info and edit arguments.
  * GitRepository.commit_all: add committer_info argument.
- Fixes and new features in internal rpm/spec support
  * rpm.SpecFile: add 'specpath' attribute
  * rpm: correctly handle 'NoSource' and 'NoPatch' tags in spec.
  * rpm: Implement spec_from_repo() helper function
  * rpm: track all "section" directives in spec file.
  * rpm: add gbp.rpm.changelog module.
    This new module contains basic containers and functionality for parsing
    and updating rpm changelogs. It is coupled with the rpm packaging policy
    class which now has definitions for rpm changelog formatting.
  * rpm: support for getting/setting changelog in spec.
    SpecFile objects now support reading and writing of the %changelog
    section.
  * rpm: store full path of spec file sources
- Fix detection of prefix directory in tarballs
  gbs import failed to import tarball properly if paths in the archive
  were prefixed with "./".</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen/0.6.12-20140521" date="1400673600">- Rebase on top of upstream version 0.6.12
- Changes in rpm-ch
  * add --message cmdline option
    For giving the text for new changelog entry/entries, skipping git commit
    messages entirely.
  * implement '--all' option
    If defined, git-rpm-ch uses all commits in the Git history. Also,
    '--since' option is omitted.
  * implement --color-scheme option
  * use name (string) as the entry author
  * internal refactoring
  * fix crash in guessing the start commit
- Changes in pq-rpm
  * implement --retain-history option
    With this option defined gbp tries to preserve the history when
    converting. That is, for each commit in the old branch create one
    corresponding commit in the new orphan packaging branch. This works by
    dumping packaging files and updating patches for each commit. However,
    empty commits are not generated - these are caused e.g. by changes in
    files that are ignored by patch-generation.
    NOTE! Only valid for the 'convert' action.
  * convert: don't try to commit empty set of patches
  * make sure we always get a sane author
  * slight unification of log messages
  * decrease (default) verbosity a bit
  * don't create pq branch when switching
- Changes in buildpackage-rpm
  * buildpackage-rpm: fix desktop notifications
  * buildpackage-rpm: remove --purge option
  * guess/parse spec as early as possible
- Documentation
  * Include man pages in RPM packages
  * Add -doc subpackage to RPM packaging
  * Build deb and rpm html docs in one docbook
  * A multitude of small cosmetic fixes
- Other misc. internal changes
  * GitRepository: implement create_tree() method
  * rpm: suppress some verbosity when updating patches in spec file
  * [ Li Jinjing ] Fix missing return value in get_current_branch method</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen/0.6.15-20140828" date="1409227200">- Rebase on top of upstream version 0.6.15
- Changes in buildpackage-rpm
  * new 'commitish' keyword for spec vcs tag
  * notify: catch RuntimeError when importing pynotify
  * fix exit code in case of GitRepositoryError
  * always create tarball for native packages
  * check submodules from the exported treeish
  * fix crash when running prebuild hook
  * always run cleaner hook
  * add --git-no-build option
  * don't crash on invalid vcs format strings
  * add '--git-native' option
  * remove some outdated/unnecessary exception handling
  * get rid of prepare_export_dir()
  * handle invalid keys in orig prefix
  * internal refactoring and fixes
- Changes in rpm-ch
  * implement --commit option
  * implement --commit-msg option
  * rpm-ch: implement --meta-bts option
  * rpm.policy: don't allow leading whitespace in bts meta tags
- docs: manpages for the rpm tools
- Misc. fixes and features
  * buildpackage: refactor tarball compression
  * gbp-dch: fix handling of the '--meta' option
  * import-orig-rpm: download tarball into parent directory
  * GitRepository/has_submodules: add treeish argument
  * tristate: implement __nonzero__() method
- Logging:
  * don't automatically setup gbp-specific logger
  * fix auto colorizing for custom streams
- Tests
  * multiple fixes and additions in ComponentTestBase class
  * testutils: add directories arg to ls_* functions
  * add unit tests for buildpackage-rpm
- Packaging
  * rpm-packaging: recommend/require unzip
  * recommend/require zipmerge
  * depend/recommend rpmbuild
  * [ Junchun Guan ] Add PKGBUILD to support arch linux
  * [ Li Jinjing ] rpm packaging: use macro for python binary</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen/0.6.22-20150206" date="1423224000">- Rebase on top of upstream version 0.6.22
- Experimental support for BitBake
  * Introduce import-bb tool.
    This is the first tool in an effort of enabling gbp in the BitBake build
    environment. Gbp-import-bb is a tool for importing packages from a
    BitBake-based "combined" distro repository into individual per-package
    Git repositories.
  * Introduce pq-bb tool.
    This is a tool for managing patch-queues for packages maintained in the
    BitBake packaging format (.bb recipes).
  * Introduce buildpackage-bb tool.
    Initial version of the tool for building BitBake packages from Git.
    NOTE: The buildpackage-bb tool itself is able to operate even without an
    initialized BitBake build environment although the build likely fails in
    this case. However, this makes it possible to export the packaging meta
    data, for example.
  * Introcude clone-bb tool.
    This is a new tool for helping to clone remote per-package Git
    repositories when working in BitBake-based "full distro" build
    environment. This is useful in the case that individual packages are
    actually maintained in per-package Git repositories (like Tizen). That
    is, the full distro repository that the developer operates in is
    composed of the packaging meta data from the individual per-package
    repositories. When willing to contribute to a package the developer
    would use clone-bb to clone the correct per-package repository and make
    his changes there.
    NOTE: clone-bb uses GBP_PACKAGING_REPO variable to determine the remote
    repository URI. This variable should be defined in the package recipes
    in order to make clone-bb usable.
  * Introduce submit-bb tool.
    This is a Tizen-specific tool for creating and pushing special submit
    tags.
- pq-rpm: better error message
- buildpackage-rpm: look for remote upstream branches.
  Consider remote branches, too, while looking for the upstream branch
  when trying to guess if a package is native or not.
- rpm packaging changes
  * enable CentOS 7.
  * include python egg-info in -common.
- rpm: suppress stderr when unpacking src.rpm
- UpstreamSource: suppress stderr from tar in _determine_prefix()
- patchseries: strip numbering when guessing subject from filename
- Changes in logging
  * don't propagate to ancestor loggers
  * don't initialize handlers in GbpLogger init.
    Better compatibility with 3rd party modules that have their own logging
    initializations.
- Features/fixes in GitRepository
  * GitRepository/__git_inout: correctly handle input error
  * GitRepository.create_tag: add 'annotate' argument.
    For forcing the creation of annotated tags. Causes the an editor to be
    spawned if no message is given.</changelog>
<changelog author="Jun Wang &lt;junbill.wang@samsung.com&gt; tizen/0.6.27-20160302" date="1456920000">- Upgrade version to 0.6.27</changelog>

</package>
<package pkgid="2d11c20241da299a6270381a43f6897b59b2b39efc06a8853306ea3387af9af4" name="git-buildpackage-common" arch="noarch">
    <version epoch="0" ver="0.6.27" rel="6.1"/>

<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 0.6.0git20130530" date="1377172800">- rpm: Improve logging in case of rpmlib error
- Add clean method to GitRepository class
- Add all_remotes option in git fetch command
- Add tags option in git push command
- rpm: print a warning if importing gbp-specific librpm fails
- rpm: implement a wrapper module for rpm lib
- rpm: simplify SpecFile._parse_filtered_spec()
- Fix pylint warnings, follow Markus' sugesstion
- rpm: enhance spec parsing error messages
- GitRepository/add_files: consistently update all tracked files
- GitRepository: Add refspec option to fetch method
- GitRepository: Add all option to pull method
- GitRepository: Add force option to push method</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 0.6.3" date="1382011200">- buildpackage: support 'commit' variable for VCS tags
- Clone a repository to a specific directory
- Fix gbs clone failure if repo url is like host:repo.git
- SpecFile.set_tag: change the default place for new tags
- remove 'repo' param to adapt to changes of write_patch_file
- pq: pass commit_info to format_patch()
- pq: pass commit_info to format_patch()
- pq.write_patch_file: drop unused argument
- pq: fix generation of series file
- common/pq: fix length of patch filenames
- buildpackage: refactor prefix handling
- tests: remove unused import in submodule tests
- tests: upper case global variables in submodule tests
- tests: add some docstrings to git submodule tests
- tests: use eq_ and ok_ from nose tools in submodule tests
- tests: use sanitize some submodule tests
- pq-rpm: don't overwrite patches in the same series
- pq: don't overwrite patches in the same series
- rpm: support guessing spec file from git treeish
- rpm.SpecFile: support parsing spec as raw text data
- rpm: minor docstring fixes
- rpm: change guess_spec() to return SpecFile object
- GitRepository.list_tree: add 'paths' option
- common/pq: support more flexible pq-branch naming
- pq-rpm: drop unused 'tries' option
- GitRepository: deprecate the get_remote_repos method
- GitRepository.has_remote_repo: use get_remotes method
- git: new class and method for remote repositories
- debian packaging: change to 1.0 source package format
- Version bump, rebase on top of 0.6.3
  * Disable cover-min-percentage setting of nose
  * docs: minor sgml syntax fix
- rpm tests: slight modificatin of import-srpm tests
- ComponentTestBase: use eq_() ok_() from nose.tools
- tests: add tests for git-import-orig-rpm
- ComponentTestBase: keep tmpdir if GBP_TESTS_NOCLEAN is in env
- ComponentTestBase: fix env restore in teardown
- config: restore mangled env in doctests
- import-orig-rpm: remove unneeded try-except
- import-orig-rpm: don't crash on invalid gbp.conf
- ComponentTestBase: more verbose output in case of branch mismatch
- rpm tests: test --filter option of git-import-srpm
- tests.testutils: add ls_zip() helper
- import-orig: rework sourcecode preparation and filtering
- import-orig: new function for filtering/re-packing sources
- buildpackage: fix handling of empty tarball prefix
- rpm: import orig: import readline in the common module
- import orig: import readline in the common module
- UpstreamSource.unpack: return UpstreamSource instance
- UpstreamSource.pack: reuse unpacked dir if no filter is used
- rpm: UpstreamSource: implement prefix guessing
- UpstreamSource: implement prefix guessing
- UpstreamSource: check that the sources exist
- UpstreamSource: store the absolute path
- rpm: UpstreamSource: move version guessing logic to PkgPolicy
- UpstreamSource: move version guessing logic to PkgPolicy
- UpstreamSource.guess_version: don't check for directories
- Fix `fatal: fetch --all does not take a repository argument`</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 0.6.6" date="1385985600">- Rebase on top of upstream version 0.6.6
- UpstreamSource: fix archive prefix guessing
- pq-rpm: create diff up to the last merge commit
  Before, merge commits broke patch generation, or, (most probably) caused
  the generated patches to be unapplicable (similar to how
  git-format-patch behaves).
  Now, changes up to the last merge commit are squashed into one diff if
  merge commits are found in the revision list from which patches are to
  be generated. Individual patches (one per commit) are generated from the
  last merge commit up to the exported revision.
- pq-rpm: magic word HEAD for patch-squashing
  When given as the squash-point, 'HEAD' translates to the end-commit.
  This allows one to configure gbp to always squash all commits into one
  monolithic diff.</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 0.6.8" date="1389096000">- Rebase on top of upstream version 0.6.8</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen/0.6.8-20140306" date="1394107200">- Rebase on top of upstream version 0.6.8
- Introduce git-rpm-ch tool.
  Initial version of the git-rpm-ch tool which is intended for maintaining
  RPM changelogs. Supports both spec files and separate "OBS style"
  changelog files.
  Implement '--tag' command line option (and other related options for
  signing) for creating and tagging a release. These correspond the
  tagging options in git-buildpackage-rpm.
  The git-buildpackage-rpm tool does not commit anything to git. However,
  in rpm-ch the '--tag' option causes the changelog modifications (and,
  all other staged changes) to be committed to git before creating the
  tag. This makes it possible to create a release and document the
  packaging/release tag name in the rpm changelog.
- Changes to gbp-pq-rpm:
  * implement 'convert' subcommand.
    The new subcommand is intended to be a one-time-callable command for
    converting a package to use the "orphan-packaging" development model and
    git layout (where packaging files are maintained in a separate branch
    and code development in another branch).
  * implement '--import-files' command line option.
    For defining the packaging file(s) that will be imported into the
    development/patch-queue branch.
    By default, the local gbp conf files are imported (so that gbp sees the
    same settings on the development/pq branc as on the packaging branch).
    Files defined with this option will appear as one monolithic commit in
    the development/patch-queue branch.
  * implement --new-packaging-dir cmdline option.
    Used for setting the packaging directory to be used in the new orphan
    packaging branch. Defaults to --packaging-dir so that the gbp.conf files
    are more likely to work without modification.
  * fail gracefully on invalid config files
  * support '%(upstreamversion)s' as a replacable string in the pq branch
    name.
- Changes to git-buildpackage-rpm
  * patch-export from development branch.
    Adds git-buildpackage-rpm --patch-export support for the 'orphan
    packaging' development model (where packaging files and development sources are kept in separate
    branches).
    New functionality:
    1. If patch-export is enabled and gbp detects that the current branch
    has a development/patch-queue branch it exports the patches from there,
    instead of the tip of the packaging branch.
    2. If gbp detects that the current (or exported) branch is a
    development/patch-queue branch it automatically enables patch-export
    and exports packaging files from the base branch (instead of the
    development/patch-queue branch.
    Also, add a new '--git-patch-export-rev' command line option with which
    the user can explicitly set the treeish from which patches are generated
    (i.e. HEAD..&lt;patch-export-rev&gt;)
  * fix spec file vcs update when doing git-tag-only
  * change default export directory.
    So that the git working directory is not dirtied, by default.
- Changes ti git-import-orig-rpm:
  * disable --merge by default.
    Merging upstream to packaging does not usually make sense with rpm
    packages. Merely, it can create confusion cause unapplicable patches to
    be generated.
  * implement --create-missing-branches option.
  * implement automatic downloading.
    Automatically try to download the archive if the archive filename points
    to a remote location.
  * get archive from spec file.
    Try to get archive path/filename from spec file if no file name is given
    on the command line.  This should make version bumps more
    straightforward: just update version number in the spec file and run
    'git-import-orig-rpm'.
- git-import-orig: implement --create-missing-branches option.
- Fixes and new features in GitRepository class
  * GitRepository/get_commit_info: correctly handle file renames/copies.
  * GitRepository.create_branch: add 'force' option
  * GitRepository.archive: add 'paths' option
  * GitRepository/git_command: strip stderr output in case of error.
  * GitRepository/add_remote_repo: fix the 'tags' argument.
  * GitRepository: allow interactive commands.
  * GitRepository: fix the 'edit' mode in commit methods.
  * GitRepository.commit_files: add committer_info and edit arguments.
  * GitRepository.commit_all: add committer_info argument.
- Fixes and new features in internal rpm/spec support
  * rpm.SpecFile: add 'specpath' attribute
  * rpm: correctly handle 'NoSource' and 'NoPatch' tags in spec.
  * rpm: Implement spec_from_repo() helper function
  * rpm: track all "section" directives in spec file.
  * rpm: add gbp.rpm.changelog module.
    This new module contains basic containers and functionality for parsing
    and updating rpm changelogs. It is coupled with the rpm packaging policy
    class which now has definitions for rpm changelog formatting.
  * rpm: support for getting/setting changelog in spec.
    SpecFile objects now support reading and writing of the %changelog
    section.
  * rpm: store full path of spec file sources
- Fix detection of prefix directory in tarballs
  gbs import failed to import tarball properly if paths in the archive
  were prefixed with "./".</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen/0.6.12-20140521" date="1400673600">- Rebase on top of upstream version 0.6.12
- Changes in rpm-ch
  * add --message cmdline option
    For giving the text for new changelog entry/entries, skipping git commit
    messages entirely.
  * implement '--all' option
    If defined, git-rpm-ch uses all commits in the Git history. Also,
    '--since' option is omitted.
  * implement --color-scheme option
  * use name (string) as the entry author
  * internal refactoring
  * fix crash in guessing the start commit
- Changes in pq-rpm
  * implement --retain-history option
    With this option defined gbp tries to preserve the history when
    converting. That is, for each commit in the old branch create one
    corresponding commit in the new orphan packaging branch. This works by
    dumping packaging files and updating patches for each commit. However,
    empty commits are not generated - these are caused e.g. by changes in
    files that are ignored by patch-generation.
    NOTE! Only valid for the 'convert' action.
  * convert: don't try to commit empty set of patches
  * make sure we always get a sane author
  * slight unification of log messages
  * decrease (default) verbosity a bit
  * don't create pq branch when switching
- Changes in buildpackage-rpm
  * buildpackage-rpm: fix desktop notifications
  * buildpackage-rpm: remove --purge option
  * guess/parse spec as early as possible
- Documentation
  * Include man pages in RPM packages
  * Add -doc subpackage to RPM packaging
  * Build deb and rpm html docs in one docbook
  * A multitude of small cosmetic fixes
- Other misc. internal changes
  * GitRepository: implement create_tree() method
  * rpm: suppress some verbosity when updating patches in spec file
  * [ Li Jinjing ] Fix missing return value in get_current_branch method</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen/0.6.15-20140828" date="1409227200">- Rebase on top of upstream version 0.6.15
- Changes in buildpackage-rpm
  * new 'commitish' keyword for spec vcs tag
  * notify: catch RuntimeError when importing pynotify
  * fix exit code in case of GitRepositoryError
  * always create tarball for native packages
  * check submodules from the exported treeish
  * fix crash when running prebuild hook
  * always run cleaner hook
  * add --git-no-build option
  * don't crash on invalid vcs format strings
  * add '--git-native' option
  * remove some outdated/unnecessary exception handling
  * get rid of prepare_export_dir()
  * handle invalid keys in orig prefix
  * internal refactoring and fixes
- Changes in rpm-ch
  * implement --commit option
  * implement --commit-msg option
  * rpm-ch: implement --meta-bts option
  * rpm.policy: don't allow leading whitespace in bts meta tags
- docs: manpages for the rpm tools
- Misc. fixes and features
  * buildpackage: refactor tarball compression
  * gbp-dch: fix handling of the '--meta' option
  * import-orig-rpm: download tarball into parent directory
  * GitRepository/has_submodules: add treeish argument
  * tristate: implement __nonzero__() method
- Logging:
  * don't automatically setup gbp-specific logger
  * fix auto colorizing for custom streams
- Tests
  * multiple fixes and additions in ComponentTestBase class
  * testutils: add directories arg to ls_* functions
  * add unit tests for buildpackage-rpm
- Packaging
  * rpm-packaging: recommend/require unzip
  * recommend/require zipmerge
  * depend/recommend rpmbuild
  * [ Junchun Guan ] Add PKGBUILD to support arch linux
  * [ Li Jinjing ] rpm packaging: use macro for python binary</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen/0.6.22-20150206" date="1423224000">- Rebase on top of upstream version 0.6.22
- Experimental support for BitBake
  * Introduce import-bb tool.
    This is the first tool in an effort of enabling gbp in the BitBake build
    environment. Gbp-import-bb is a tool for importing packages from a
    BitBake-based "combined" distro repository into individual per-package
    Git repositories.
  * Introduce pq-bb tool.
    This is a tool for managing patch-queues for packages maintained in the
    BitBake packaging format (.bb recipes).
  * Introduce buildpackage-bb tool.
    Initial version of the tool for building BitBake packages from Git.
    NOTE: The buildpackage-bb tool itself is able to operate even without an
    initialized BitBake build environment although the build likely fails in
    this case. However, this makes it possible to export the packaging meta
    data, for example.
  * Introcude clone-bb tool.
    This is a new tool for helping to clone remote per-package Git
    repositories when working in BitBake-based "full distro" build
    environment. This is useful in the case that individual packages are
    actually maintained in per-package Git repositories (like Tizen). That
    is, the full distro repository that the developer operates in is
    composed of the packaging meta data from the individual per-package
    repositories. When willing to contribute to a package the developer
    would use clone-bb to clone the correct per-package repository and make
    his changes there.
    NOTE: clone-bb uses GBP_PACKAGING_REPO variable to determine the remote
    repository URI. This variable should be defined in the package recipes
    in order to make clone-bb usable.
  * Introduce submit-bb tool.
    This is a Tizen-specific tool for creating and pushing special submit
    tags.
- pq-rpm: better error message
- buildpackage-rpm: look for remote upstream branches.
  Consider remote branches, too, while looking for the upstream branch
  when trying to guess if a package is native or not.
- rpm packaging changes
  * enable CentOS 7.
  * include python egg-info in -common.
- rpm: suppress stderr when unpacking src.rpm
- UpstreamSource: suppress stderr from tar in _determine_prefix()
- patchseries: strip numbering when guessing subject from filename
- Changes in logging
  * don't propagate to ancestor loggers
  * don't initialize handlers in GbpLogger init.
    Better compatibility with 3rd party modules that have their own logging
    initializations.
- Features/fixes in GitRepository
  * GitRepository/__git_inout: correctly handle input error
  * GitRepository.create_tag: add 'annotate' argument.
    For forcing the creation of annotated tags. Causes the an editor to be
    spawned if no message is given.</changelog>
<changelog author="Jun Wang &lt;junbill.wang@samsung.com&gt; tizen/0.6.27-20160302" date="1456920000">- Upgrade version to 0.6.27</changelog>

</package>
<package pkgid="009dd49584a6f0d2228f85ef6ab6b2ac33fa6755d07d98e924e13de084a8f047" name="mic" arch="src">
    <version epoch="0" ver="0.27" rel="7.1"/>

<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.6" date="1329393600">- Release 0.6, changes including:
  - give hint when converted image existed
  - conf.py: proxy scheme check
  - space check before copy image
  - zypp: abort with error msg for repo resolver issues
  - runner.py refinement
  - ks file syntax check for '%post' without '%end'
  - support more compression formats than only bzip2
  - fix msg NoneType issue, causing exit after install
  - bootstrap:
  - catch creator error when retrieving bootstrap metadata
  - correct matching .metadata file in bootstrap</changelog>
<changelog author="Jian-feng Ding &lt;jian-feng.ding@intel.com&gt; - 0.7" date="1330689600">- Release 0.7, changes including:
  - zypp backend: fixed a fatal issue of unreleasable loop devs
  - zypp backend: more friendly output message
  - backend: share cached rpm files between yum and zypp
  - enhancement for multiple partition loop format
  - make msger to accept Unicode string
  - fixed a regression of compress option for FS format
  - fixed issues in openSUSE12.1
  - new written man page</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.8" date="1332763200">- Release 0.8, changes including:
  - partition alignment support
  - remove bootloader option 'quiet vga' for raw
  - update dist files in git source
  - update unittest, add cases for chroot, msger, runner
  - add 40 system test case for help
  - rewrite loop device allocation mechanism</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.9" date="1334318400">- Release 0.9, changes including:
  - support pre-install package with zypp backend
  - sync /etc/mic/mic.conf to bootstrap
  - enhance sorting for version comparsion in zypp
  - rewrite chroot tar image using xml format mount point file
  - fix the incorrect number showing in fs src pkgs download
  - remove tests directory for dist in Makefile
  - fix liveusb parted mkpart failure, revert mbr size expand in raw
  - cleanup /tmp/repolic* dir in the EULA checking</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.10" date="1337083200">- Release 0.10.4, changes including:
  - container support using '%attachment' section in ks
  - add --compress-to option to support zip format in loop image
  - auto-detect config and plugindir to meet virtualenv and customized install
  - remove all hardcoded info in setup.py and use sys.prefix for installing
  - tolerate some OS errors in the image configurations stage
  - extra patch:
  - fix zypp missing password when using username passwd
  - some fixes to enhance authentication url
  - refine repostr structure to fix comma issue in baseurl</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.11" date="1339156800">- Release 0.11, changes including:
  - support new subcmd 'auto' to handle magic line in ks
  - enhance the handle of authentication url and https proxy
  - support packing images together and support compressed file format
  - reset LD_PRELOAD for chroot env
  - centralized interface to check existing images
  - avoid live image creating when using multi-partitions
  - resolve the depends of python-urlgrabber
  - bug fix:
  - fix logfile context lost issue
  - fix attachment package url handling
  - fix mic ch raw failed issue</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.12" date="1340193600">- Release 0.12, changes including:
  - use default value when @BUILD_ID@ and @ARCH@ not specified
  - enhance proxy support in attachment retrieve
  - add new --shrink opt for loop image to control img shrinking
  - avoid invalid literal for loop device generation
  - relocate and refactor selinux_check func
  - remove prefix for make install
  - bug fix:
  - fix compres image in raw image
  - fix src pkgs download failed issue
  - fix convert failed issue</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.13" date="1342094400">- Release 0.13, changes including:
  - create logfile as default when --release specifid
  - use 'gzip' and 'bzip2' to pack image instead of python
  - automatically detect path of 'env' for chroot
  - record version and os info in build log and logfile
  - bug fix:
  - fix popup message in ubuntus
  - fix unicode issue for logfile
  - better fix for 'chroot raw' issue</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.14" date="1343908800">- Release 0.14, changes including:
  - use cached metadata when checksum is not changed
  - skip non-fatal error in ks file and prompt user to handle
  - prompt user to handle when failed to apply img configure
  - replace hard name with device uuid in etc/fstab
  - enhance extlinux cfg file for symbolic kernel like IVI
  - support label assign for raw image
  - bug fix:
  - fix live image create failure when label assigned
  - avoid traceback when converting unsupported type
  - fix mic --version ugly output</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.15" date="1346414400">- Release 0.15, changes including:
  - new bootstrap implementation: use bootstrap as default
  - enable 'pkgmgr=auto' to use auto-selected backend
  - just warning in chroot when not Tizen/MeeGo chroot dir
  - remove username and password in zypp repo file
  - update usage.rst for man page
  - bug fix:
  - fix https proxy issue in yum backend
  - fix repodata checksum failed issue
  - avoid traceback when loopback is NoneType</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.16" date="1359547200">- add GPT support for UEFI format
  - add --ptable=gpt option in kickstart to enable GPT
  - add simple GPT parser to parse PARTUUID
  - use PARTUUID in syslinux.cfg if gpt required
  - clean up the mess code and improve readability
  - improve alignment to reduce unused space
  - add interface add_disks for PartitionedMount
  - clean up the mess code in partitionfs.py
  - append timestamp suffix to image name by default
  - add a new option --nocache in kickstart to disable caching rpm
  - add a new value 'vcs' for --record-pkgs to save VCS info
  - add a new option --fstab-entry for raw image to set fstab entry
  - introduce a new option '--install-pkgs' in mic
  - valid values imagined: source, debuginfo, debugsource
  - enable 'debuginfo' to install '-debuginfo' rpm in the meantime
  - improve loop device generating and cleaning mechanism
  - code clean:
  - update documentation
  - rename MANIFEST to MD5SUM
  - clean up moblin stuff in kickstart
  - clean mic tests and keep only unittest
  - sepreate the download related as independent module
  - bug fix:
  - cleanup zypp credential file to fix conflicts during installing
  - fix the issue that outdir/cachedir is not dir
  - recalculate package content recording
  - refactor try except statement in baseimager
  - fix existing loop images overwritten</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.17" date="1362052800">- support new distribution Fedora 18
  - enable to handle more than 3 partitions
  - support partitions without mount point
  - move vcs infomation from .vcs to .packages
  - clean up some mess in utils/misc.py
  - bug fix:
  - fix failure when symbolic link vmlinuz in single disk
  - fix incorrect alignment handling
  - fix requires squashfs in opensuse
  - fix unicode error in myurlgrab
  - code cleanup:
  - clean up some mess in utils/misc.py
  - clean up pylint issue in creator.py</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.18" date="1364990400">- put build_id before image name for release option
  - mount build directory as tmpfs to speed up
  - enable --priority in ks to set priority
  - upgrade qemu (mic's depends) to 1.4.0
  - bug fix:
  - fix debuginfo rpm swig attribute lost
  - fix release option failure with slash
  - fix man page lost in some distros
  - fix bmap file packed to tarball
  - code cleanup:
  - unify import statements to absolute import
  - clean up many undefined in partitionfs.py/loop.py/livecd.py
  - clean up some useless try and raise blocks
  - clean up some bad indentations
  - improve some error messages</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.19" date="1368705600">- new distribution support: Ubuntu 13.04 and openSUSE 12.3
  - introduce '--part-type' to handle GPT partition
  - copy bmap creation from bmap-tools
  - update some depends and fix depends issue
  - bug fix:
  - fix bug autologinuser always set
  - fix symlink bind mount left issue
  - fix '/var/lock' non-existent throw traceback</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.20" date="1372680000">* new distribution support: CentOS 6
  * drop image creation if checked packages not present in image
  * introduce 'installerfw' command in kickstart to customize configuration
  * improve output message of post scripts
  * bug fix:
  - fix rpm not support 'VCS' tag traceback</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.21" date="1377518400">* new distribution support: Fedora 19
  * refactor chroot module to correct the logic
  * add an alias for installerfw - installerfw_plugins
  * remove fuser dependency to avoid some unmount issue
  * enable proxy setting with authentication
  * don't get proxy info from /etc/sysconfig/proxy ever
  * kill processes inside chroot after post script running
  * bug fix:
  - fix bootloader options omitted
  - raise when incorrectly set partition flags 'legacy_boot'
  - fix wrong file descriptor issue
  - fix some requires</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.22" date="1382616000">* use __version__ variable instead of VERSION file
  * refactor msger module to ulitize logging module
  * refine error class module
  * improve installation in virtualenv
  * add bash completion support
  * add zsh completion support
  * export mapper device related to installer framework
  * update BmapCreate to the latest version
  * bug fix:
  - fix customized plugin_dir not work in bootstrap
  - fix packing process exit on Ubuntu
  - fix loop device alloaction failed on openSUSE
  - fix incorrect number showing during installing
  - set owner of cacheidr/outdir to SUDO_USER
  - correct project url in setup.py
  - fix mic not work when mic.conf disappear</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.23" date="1386849600">* new distribution support: Ubuntu 13.10 and OpenSUSE 13.1
  * split requirements to subpackage 'mic-native' to reduce mic's dependencies
  * support arm64 architecture image creation in native mode
  * new option '--interactive'/'--non-interactive' to enable/disable interaction
  * new option '--uuid' for 'part' in ks file to set filesystem uuid
  * export more variables related to installer framework for loop format
  * bug fix:
  - fix bootstrap handling if bootstrap package failed
  - fix 'mapper_device' key error
  - fix detailed error messages missing in mounting
  - fix version comparing issue of urlgrabber in Fedora</changelog>
<changelog author="Gui Chen &lt;gui.chen@intel.com&gt; - 0.24" date="1394539200">* enhance to handle password with special characters
  * change python-zypp require to python-zypp-tizen
  * add --repo comand option for local build
  * add --user and --password option for %repo directive of ks file
  * clean up some codes relevant to EULA agreement
  * add hostname showing in log
  * bug fix:
  - fix chroot failed by space in image not enough
  - fix obsolete packages incorrect handling
  - fix yum backend failed to cache packages
  - fix bare ip in no_proxy not working
  - fix repeated log showing with yum backend
  - fix loop device latency timing
  - fix zypp failed to download by changing 'cachedir'
  - fix 'mkfs' not working caused by mic-bootstrap install failed</changelog>
<changelog author="Jianzhong Fang &lt;jz.fang@samsung.com&gt; - 0.27" date="1459166400">* new distribution support: CentOS 7, Debian 8, Fedora 21,
    Fedora 22, openSUSE 13.2
  * generate manifest file to describe image information
  * refactor archive and compress module
  * support sparse handle for tar command
  * replace system V with systemd on locale setting
  * add qcow2 image format support
  * add strict mode for package installing
  * enable ssl_verify option in config file
  * enhance checksums of outputs: md5sum, sha1sum, sha256sum (#DEVT-224)
  * drop mic-native support (#DEVT-248)
  * update mount option
  * revert bind mount config file to instroot
  * drop liveusb, livecd and raw image formats support (#DEVT-243, #DEVT-263)
  * use argparse module to parse the cmd line (#DEVT-52)
  * bug fix:
  - fix logfile incomplete in release option
  - fix config file disappear in bootstrap
  - fix aarch64 bin_format
  - fix pylint
  - fix real path of device mapper causing initrd failure
  - fix qemu arm and arm64 issues
  - fix AttributeError in zypp backend
  - fix 'python-xml' depends used by cElements
  - fix xml requirements
  - fix logfile not in release of '--release' when creation failed
  - fix copyright missing issue
  - fix syslinux installation path issue in Arch Linux
  - fix priority option of ks file not apply (#DEVT-254)
  - fix need to check loop device after excute 'losetup --find'
  - fix check scriptlet error file on /tmp/.postscript/error/
  - fix broken tar archive</changelog>

</package>
<package pkgid="dc1d05156b886015f8571608584ff4014cc377930585e94bb24c2add7ee427ac" name="python-jenkinsapi" arch="src">
    <version epoch="0" ver="0.2.26" rel="5.1"/>

<changelog author="Ed Bartosh &lt;eduard.bartosh@intel.com&gt; 0.2.20" date="1391169600">- Packaging is taken from OpenSUSE</changelog>
<changelog author="Ed Bartosh &lt;ed@ed.fi.intel.com&gt; 0.2.26" date="1422705600">- Only process non empty actions while getting job parameters
- Add support for Job Folders (CloudBees Folders Plugin).
- Fix tests.
- get_build_triggerurl logic fix
- job.get_build_triggerurl update
- making change more pythonic
- Addressing issue/221 - changing depth=1
- Added Aleksey to primary authors list
- Version bump
- added documentation about getting version info
- move the stuff out of readme
- Added note about experimental nature of this branch
- Added Python 3.3 to this branch build spec
- Added build for Python 2.6
- Tying to fix P3 incompatibility
- Fix wrong translation of 'except' from python2 to pytho3
- Use print() (with 'from __future__ import print_function')
- urllib compatibility
- exception.message -&gt; str(exception)
- basestring, unicode, str compatibility
- iteritems -&gt; items Queue -&gt; queue
- resolve_job_folders skipping jobs fix
- Changed Jenkins URL to download LTS version
- add unit test for multiple top level folders
- Changed Jenkins URL to download LTS version
- Added conversions from bytes to strings
- polling jenkins each time Jobs is initialized
- Add support to create Jenkins object without immediately polling jobs.
- minor fix to exception messages to improve readability.
- Adapt fingerprint to catch HTTPError from requests
- Add a few Jenkins API usage examples
- Fixed pylint violations
- Simplified get_job_url function
- Add support to create Jenkins object without immediately polling jobs.
- minor fix to exception messages to improve readability.
- Adapt fingerprint to catch HTTPError from requests
- Fixed pylint violations
- Simplified get_job_url function
- Small changes in jobs classes
- Formatting fixes
- Add test to verify fetching of plugin details,
- Fix for issue #268 and unit tests for it
- Fixed incorrect merge
- Set to use unittest2 library instead of unittest
- Added unittest2 so travis can run tests with recent Python
- Set unitest2 to be used only on python 2.6
- Added support for 'del' in Jenkins object: remove job
- Added small delay for test_parametrized_build
- Added re-try when removing job
- Added support for 'del' in Jenkins object: remove job
- Added small delay for test_parametrized_build
- Added re-try when removing job
- Removed paragraph about Python 3 branch
- fixes job invoke when no build parameters exist for a particular job
- Fixed most of the unit tests to work on all python versions
- Fixed md5 calculation
- build.get_console() now returns string in all python versions
- Fixed assertion renamed in P3
- Fixed most of the unit tests to work on all python versions
- Fixed md5 calculation
- build.get_console() now returns string in all python versions
- Fixed assertion renamed in P3
- Added small delay to let jenkins catchup
- add logging url when non 200 OK response
- Added short delay to let job run for a bit
- Added section about Python versions
- Bumped Python from 3.3 to 3.4
- Revert "Bumped Python from 3.3 to 3.4"
- Added better test to job._add_missing_builds()
- Fix for issue #280
- Disabled "too many branches" in pylint
- Fix for P3 compatibility
- add job.get_build_metadata
- add comment about depth control
- add get_causes
- make tests more robust
- Example of adding a shell build
- Fix for issue #291
- pre release tidy-ups and version bump
- revert accidental removel of unittest2 from the setup.py script
- add release script, fix broken landscape.io image in docs
- minor version bump
- proposed fix for #295 - crash during get_params on maven jobs
- added travis buttons to readme
- version bump
- add the __version__ feature to the package
- added a way of getting the api version from the command-line
- added tagging of releases
- fix some pep8 violations
- added additional versions of python to the travis configuration;
- tidy up travis files
- add doc upload step to the release script
- mega tidy-up of the docs
- tidy up links section
- better support for querying plugins
- pep8 tidyup and example of plugin querying
- plugin info example
- version bump
- remove parts of failing tests
- remove duplicated travis link
- ensure that tags are pushed at the end of every build
- Version bump and update deps to the latest version. Also added a link to requires.io to the readme.rst file
- Proposed fix for #297
- interim commit - refactor of queue &amp; invocation
- reducing the number of errors from the refactor of invocation/queues
- fix a bunch of tests
- Pep8 fixes + remove bogus imports
- Fix way more bugs.
- Trying to fix more errors.
- Fix many more bugs
- Fix some pep8 violations I had introduced.
- Cut out some more crap, but noticed that invocation of parameterized builds is broken.
- Lots of fixes
- Fix redefinition of id.
- Tidy up exceptions file.
- More fixes to parameterized builds - still broken.
- Tiny fixes.
- adding test to illustrate bug with get_revision with no scm
- Fixing get_revision with no scm
- Fixed kerberos request's interface
- Linter fixes
- adding test to illustrate bug with get_revision with no scm
- Fixing get_revision with no scm
- Fixed kerberos request's interface
- Linter fixes
- Low level api change to support tree api
- Changed job and build modules to use tree api
- Replaced _poll_if_needed with lightweight tree calls
- Added support for JENKINS_URL env. variable
- Added use of tree api to node, job, queue and fixed tests
- Pylint fixes
- added decode to test to make it work in PY 3.x
- Fix a typo in a function name in queing
- add update_config() to view
- add View.get_config() and tests covering View.get_config() as well as View.update_config()
- fix invoke(skip_if_running=True)
- Set pylint version to ensure compatibility with python 2.6
- Set pylint version to ensure compatibility with python 2.6
- version bump</changelog>

</package>
<package pkgid="99afba7cd6b6eb8ece565988da086e6635c5c6cffa22c83f15d59845251ee782" name="perl-Crypt-SSLeay" arch="src">
    <version epoch="0" ver="0.64" rel="1.1"/>

<changelog author="Release Engineering &lt;rel-eng at fedoraproject dot org&gt; - 0.57-5" date="1196856000">- Rebuild for deps</changelog>
<changelog author="Fedora Release Engineering &lt;rel-eng@fedoraproject.org&gt; - 0.57-6" date="1203422400">- Autorebuild for GCC 4.3</changelog>
<changelog author="Tom &quot;spot&quot; Callaway &lt;tcallawa@redhat.com&gt; - 0.57-7" date="1204718400">- rebuild for new perl</changelog>
<changelog author="Marcela Maslanova &lt;mmaslano@redhat.com&gt; - 0.57-8" date="1222257600">- fix patches for fuzz</changelog>
<changelog author="Marcela Maslanova &lt;mmaslano@redhat.com&gt; - 0.57-9" date="1223294400">- add examples into doc</changelog>
<changelog author="Tomas Mraz &lt;tmraz@redhat.com&gt; - 0.57-10" date="1232193600">- rebuild with new openssl</changelog>
<changelog author="Fedora Release Engineering &lt;rel-eng@lists.fedoraproject.org&gt; - 0.57-11" date="1235649600">- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild</changelog>
<changelog author="Fedora Release Engineering &lt;rel-eng@lists.fedoraproject.org&gt; - 0.57-12" date="1248523200">- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild</changelog>
<changelog author="Tomas Mraz &lt;tmraz@redhat.com&gt; - 0.57-13" date="1250856000">- rebuilt with new openssl</changelog>
<changelog author="Marcela Ma?lá?ová &lt;mmaslano@redhat.com&gt; - 0.57-14" date="1259150400">- change Makefile for openssl 1.0, which couldn't be found properly before</changelog>
<changelog author="Stepan Kasal &lt;skasal@redhat.com&gt; - 0.57-16" date="1260187200">- rebuild against perl 5.10.1</changelog>
<changelog author="Marcela Maslanova &lt;mmaslano@redhat.com&gt; - 0.57-17" date="1272628800">- Mass rebuild with perl-5.12.0</changelog>
<changelog author="Petr Sabata &lt;psabata@redhat.com&gt; - 0.58-1" date="1283342400">- New upstream release, v0.58
- removing perl-Crypt-SSLeay-0.57-live-tests.patch, fixed in upstream
- removing perl-Crypt-SSLeay-Makefile_ssl1.patch, fixed in upstream</changelog>
<changelog author="Marcela Maslanova &lt;mmaslano@redhat.com&gt; - 0.58-2" date="1292500800">- Rebuild to fix problems with vendorarch/lib (#661697)</changelog>
<changelog author="Fedora Release Engineering &lt;rel-eng@lists.fedoraproject.org&gt; - 0.58-3" date="1297166400">- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild</changelog>
<changelog author="Paul Howarth &lt;paul@city-fan.org&gt; - 0.58-4" date="1303214400">- Remove buildroot specification and cleaning, not needed for modern rpmbuild
- Use %{?perl_default_filter}
- Filter the perl(DB) provide in a way that works with rpm &gt;= 4.9
- Use DESTDIR rather than PERL_INSTALL_ROOT
- Fix line endings on documentation
- Fix upstream source URL
- Fix argument order for find with -depth</changelog>
<changelog author="Petr Sabata &lt;contyk@redhat.com&gt; - 0.58-5" date="1311163200">- Perl mass rebuild</changelog>
<changelog author="Petr Pisar &lt;ppisar@redhat.com&gt; - 0.58-6" date="1311336000">- RPM 4.9 dependency filtering added</changelog>
<changelog author="Petr Sabata &lt;contyk@redhat.com&gt; - 0.58-7" date="1315396800">- Link to the ca-certificates ca-bundle.crt instead of shipping our own,
  outdated copy (#734385)</changelog>
<changelog author="Fedora Release Engineering &lt;rel-eng@lists.fedoraproject.org&gt; - 0.58-8" date="1326456000">- Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild</changelog>

</package>
<package pkgid="56a5382e868a0bb0cd2cdb1c852edfed069ed3c02d1439452c40d7bc831d4724" name="lthor" arch="src">
    <version epoch="0" ver="1.4" rel="3.1"/>

<changelog author="eduard.bartosh@intel.com" date="1352203200">- Initial packaging</changelog>

</package>
<package pkgid="8ab822ae74996444d88f8784d0afa84589ba37cb6bce23ebb27e4868b7d025fa" name="gbs" arch="src">
    <version epoch="0" ver="0.24" rel="1.15.1"/>

<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.9" date="1344859200">- Upgrade to gbs v0.9, which contains the following features:
  * Upgrade to gbs v0.9, which contains the following features:
  * Re-designed gbs config format and parser to support multiple profile more flexible:
  - Use profile oriented style of config
  - Inherited config files supportted, three level support now: /etc/gbs.conf, ~/.gbs.conf
    and $PWD/.gbs.conf
  * integrate depanneur to gbs
  * local full build support, including the following features:
  - Multiple packages build
  - Dependency build
  - Parallel build
  - Incremental build
  * Patch/upstream tarball generation is enabled if "upstream" branch is found
  - If "pristine-tar" branch is found, checkout the orig tarball using pristine-tar
  - If "pristine-tar" branch is NOT found, generate the upstream tarball from a git tag matching the version
  - If the "upstream" branch is NOT found, gbs/gbp uses the current logic
  * If local repo specified, local repo is high priority when selecting packages
  * Code cleanup and refinements.
  * bug fix.</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.10" date="1347969600">- Upgrade to gbs v0.10, which contains the following features:
  * Re-designed gbs config format and parser to support multiple profile more flexible:
  - Use profile oriented style of config
  - Inherited config files supportted, three level support now: /etc/gbs.conf, ~/.gbs.conf
    and $PWD/.gbs.conf
  * integrate depanneur to gbs
  * local full build support, including the following features:
  - Multiple packages build
  - Dependency build
  - Parallel build
  - Incremental build
  * Patch/upstream tarball generation is enabled if "upstream" branch is found
  - If "pristine-tar" branch is found, checkout the orig tarball using pristine-tar
  - If "pristine-tar" branch is NOT found, generate the upstream tarball from a git tag matching the version
  - If the "upstream" branch is NOT found, gbs/gbp uses the current logic
  * If local repo specified, local repo is high priority when selecting packages
  * Remove -A option for gbs chroot, and build root directory must be specified
  * Code cleanup and refinements.
  * bug fix.</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.11" date="1351166400">- Upgrade to gbs v0.11, which contains the following bug fixing &amp; features:
  * Add --spec in 'gbs build' to support building one spec file for packages
    contains multiple spec files.
  * Add --profile/-P in 'gbs build' to support building packages using specified
    profile.
  * support local buildroot configurable in config file. The 'buildroot' can
    be set under the 'general' section as a global setting.
  * more clear and readable error report for gbs build, including gbs export
    error, expansion error and rpmbuild error.
  * bug fix:
  - fix plaintext passwd printed for some error cases
  - fix gbs archive tar ball issue if using user defined macro in spec file
  - fix request passwd again if one package build for a long time(&gt;15 mins)
  - fix sudo timeout issue, which will result in endless loop
  - fix return 0 from depanneur even if error occurs
  - unify display color of debug message in gbs and depanneur
  - fix endless loop if package circle dependency exists
  - fix gbs build error if '~' exist in build root path
  - fix passwd conflict issue with multiple instance of 'gbs build'
  - fix remotebuild can't run in sub-directory issue
  - fix gbs build error with https_proxy trailing '/'
  - fix gbs submit gives no error if there is no comment
  - describe missing dependencies for gbs build
  - support create project outside home:&lt;user&gt; if user have permission
  - fix server's certificate traceback issue for gbs remotebuild</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.11.1" date="1352721600">- Upgrade to gbs v0.11.1, which contains the following bug fixing &amp; features:
  * depend on depanneur 0.2.1 to fix build break issue for 'osc build'</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.12" date="1353844800">* upgrade to gbs v0.12, which contains the following bug fixing &amp; features:
  * support build rpm packages for incremental build
  * --noinit support
  * x86_64 support
  * add --keep-packs to keep unused packages in buildroot
  * show simple progress message for long time operations
  * pristine-tar support
  * patches generation for upstream branch exists
  * add --define option to define macros for rpmbuild
  * no hard code default base project
  * modify changelog order to follow default order of git log
  * change --spec to use only base file name
  * ignore .gbs.conf in patch-generation
  * cmd_import: enable importing patches
  * remove output repo and buildroot info to depanneur
  * bug fix:
  - set TIZEN_BUILD_ROOT as abspath</changelog>
<changelog author="Qiang Zhang  &lt;qiang.z.zhang@intel.com&gt; - 0.13" date="1358942400">* upgrade to gbs v0.13, which contains the following bug fixing &amp; features:
  * tab completion support
  * five new import options support:
  * --filters: files to filter out during import
  * --allow-same-version: allow to import already imported version
  * --native: A dist native package, no separate upstream
  * --upstream-vcs-tag: upstream VCS tag add to the merge commit
  * --no-patch-export support for export/remotebuild/build modules
  * Re-orgnize and group gbs help information
  * supported arches clean up
  * new subcommands 'clone/pull' added, which can be used for developers
    to clone tizen source code, and upstream/pristine-tar branches can be
    tracked automatically
  * add --tag option for submit module to support group submission
  * bug fix:
  - traceback occurs if specified outdir has no write permission
  - fix misleading error handling while no spec file found
  - break link structure if package is a link in OBS
  - crash if specify a non-exist specfile with --spec option</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.14" date="1361534400">* upgrade to gbs v0.14, which contains the following bug fixing &amp; features:
  * Add --binary-from-file option to specify a package list file
  * Change --binary-list option, accept a packages list separated by comma(,).
  * Add --deps to build specified packages and all packages they depend
  * Add --rdeps to build specified packages and all packages depend on them
  * bug fix:
  - gbs remotebuild does not work with linked package(not branch package)</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.15" date="1364212800">* upgrade to gbs v0.15, which contains the following bug fixing &amp; features:
  * add --baselibs option to support creating -32bit/-64bit/-x86 rpms for
    other arches
  * optimization for local build, especially for local full build
  * support updating multiple spec files in one package in export module
  * dependency upgrade, including qemu,osc,obs-build,crypt-ssleay
  * depend on new osc / osc-build
  * tizen system support
  * more osc api added: linked projects support, project deletion
  * bug fix:
  - consistency issue about package cache and sources
  - spec parser issue on ubuntu system</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.16" date="1368532800">* new subcommands 'createimage/cr' added, which can be used for developers
    to create image using ks file
  * performance optimization
  - put all build roots in a individual directory, which can be mounted as tmpfs
    to speed up building, based on our experimental build time can save 50%. We
    use 800 Tizen packages as test data, without tmpfs, gbs spent about 5 hours
    to build all packages, but with tmpfs enabled, only 2h, 25mins spent
  - avoid export multiple times for packages contain multiple spec files
  - refine createrepo: add --update for if repodata already exists
  - export: use lower compression level for orig tarballs
  * Add statistical of each errors, including export/expansion/rpmbuild errors
  * bug fix:
  - prereqs involved for dependency resolving
  - fix wrong @deps which contain version info
  - quote metacharacters in pattern to fix strip issue if metacharacters exist</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.17" date="1372680000">* upgrade to gbs v0.17, which contains the following bug fixing &amp; features:
  * New gbs config refinements
  - 'work_dir' support in [general] section
  - 'buildconf' support  in each [profile] section, use buildconf to specify
    local build conf
  - string interpolation: ${key} can be used to reference keys defined in
    [general] section
  - 'packaging_branch' support in [general] section, which can be used to
    specify working or development branch, and the default is 'master'
  * Support fetching build conf from standard RPM repodata
  * create debug package by default
  * refinement:
  - report package dependency cycles in time
  - load dependency data during refresh repo, instead of during parsing every
    spec file
  * bug fix:
  - get target arch from build conf if 'Target' is set in build config, which
    make gbs and remote obs generate the same arch for final RPM package
  - exit unexpectedly if cycles exist
  - using higer version in different repo</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.18" date="1377000000">* upgrade to gbs v0.18, which contains the following bug fixing &amp; features:
  * New gbs config refinements
  - offline local full build support for tizen 2.1/2.2/3.0 on tizen.org
  - support CI_CNT and B_CNT OBS
  - zsh completion support
  * bug fix:
  - fix build conf and profile naming limitation: build conf can't contains
    '-' and profile name can't start with digital, like profile.2.1tizen.</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.19" date="1382097600">* upgrade to gbs v0.19, which contains the following bug fixing &amp; features:
  * [build] support comments(#) in binary-list file for --binary-from-file
  * [build] remove previous built rpm and srpm if new version has been built out
  * [remotebuild] split out to separate sub-package: gbs-remotebuild
  * [import] add --upstream-tag option to set customized tag format
  * [export] track upstream/pristine-tar branch automatically, and use upstream
    and pristine-tar branch to generate tar ball.
  * [export] update all spec file if multiple spec files exist, updates
    including insert patches and VCS tag
  * [export] use commit sha1 instead of tag name in spec file VCS tag
  * [clone] add directory argument to gbs clone
  * [submit] support '/' in git branch
  * [conf] overwrite different level of gbs.conf instead of clean up them.
  * [conf] load project special gbs.conf if gitdir specified
  * update dependencies:
  - depanneur &gt;= 0.10
  - pristine-tar &gt;= 1.28
  - librpm-tizen &gt;= 4.11.0.1.tizen20130618-tizen20131001
  - git-buildpackage-rpm &gt;= 0.6.3-tizen20131017</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; - 0.20" date="1386676800">* [build] attempt to bypass HTTP caches when fetching repomd.xml
  * [build] generate html &amp; json format report
  * [build] no default upstream-branch option while calling depanneur
  * [build] refine build report summary:
  - add build log dir
  - always print the dirs of final build files
  - add succeeded packages number
  * [build] depend on initvm to register qemu handler
  * [build]add arm 64(aarch64) support
  * [export ]update pristine-tar to fix pristine-tar branch broken issue
  * [doc] refine gbs config and FAQ parts of gbs document
  * update dependencies:
  - depanneur &gt;= 0.10.1
  - build &gt;= 20131112
  - git-buildpackage &gt;= tizen20131202
  - pristine-tar &gt;= 1.28-tizen20131205</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.21" date="1394539200">* [jenkins-job] support two jenkins jobs for local build:
  - local full build jenkins job for build all packages and create images
  - build specified packages list and create images
  * [build] support --package-list and --package-from-file to select pacakges
  * [build] enhance exception caused by proxy
  * [export]clean untracked upstream/pristine-tar branches when export done
  * [doc] enable gbs man page
  * update dependencies:
  - depanneur &gt;= 0.12
  - build &gt;= 20131112
  - git-buildpackage &gt;= 0.6.8-tizen20140306</changelog>
<changelog author="Zhang Qiang &lt;qiang.z.zhang@intel.com&gt; 0.22" date="1400673600">* orphan-packaging development model (experimental)
  - implement 'devel' subcommand for  orphan-packaging development model
  - 'gbs devel' subcommand contains 'start', 'export', 'switch' and
    'convert' actions.
  - updated export/build import subcommands to support new
    orphan-packaging development model
  * conf:
  - make it possible to add new sections
  - make it possible to update an empty conf file
  - support new profile key 'exclude_packages'
  * changelog: utilize rpm-ch from git-buildpackage
  * build: add group metadata to local repodata if package-groups.rpm exists
  * fix Pylint warning</changelog>
<changelog author="Zhang Qiang &lt;qiang.z.zhang@intel.com&gt; 0.22.1" date="1402660800">* export: disable desktop notifications to fix backtrace issue
  * export: change VCS tag in spec to sha1 of commitish
  * build: ignore OS/ABI field in ELF header for aarch64</changelog>
<changelog author="Li Jinjing &lt;jinjingx.li@intel.com&gt; 0.23" date="1413374400">* upgrade to gbs v0.23, which contains the following bug fixing &amp; features:
  * export: support --fallback-to-native command line option to force gbs to
    export non-native packages in native packaging mode
  * export: support native config option by setting default value(yes, true,
    1, enabled, on) in .gbs.conf config file to enable native
    packaging mode in git tree
  * build: support no source rpm building with --skip-srcrpm option
  * build: add new arch mips and mipsel to support MIPS architecture and
    toolchains
  * build: support for distributed compiler network with --icecream option
  * bug fix:
  - build: fix --include-all option on development branch(orphan-packaging
    mode)
  - dependency issue on gbs repository for fedora
  - disable some invalid pylint errors
  * update dependencies:
  - depanneur &gt;= 0.14
  - git-buildpackage &gt;= 0.6.15-tizen20140828</changelog>
<changelog author="Li Jinjing &lt;jinjingx.li@intel.com&gt; 0.23.1" date="1421755200">* upgrade to gbs v0.23.1, which contains the following bug fixing &amp; features:
  * bug fix:
  - build: fix get "fallback_to_native" value from non-default gbs
    configuration
  - fix no jenkins user exists issue when installing gbs-jenkins-scripts and
    gbs-jenkins-jobs packages
  - fix bad indentation from pylint checking
  - fix tag mode in test_import script</changelog>
<changelog author="Dai Lang &lt;langx.dai@intel.com&gt; 0.23.2" date="1422878400">* upgrade to gbs v0.23.2, which contains the following bug fixing &amp; features:
  * bug fix:
  - build: fix get "fallback_to_native" value from non-default gbs
    configuration
  - fix bad indentation from pylint checking
  - fix tag mode in test_import script</changelog>
<changelog author="Wang jun &lt;junbill.wang@samsung.com&gt; 0.24" date="1462190400">* upgrade to gbs v0.24, which contains the following bug fixing &amp; features:
  * bug fix:
  - fix Security issues that normal user can gain root permission with gbs chroot
  - fix  git-build-package bugs and imporve some performance
  * Add --fail-fast option.
  * update dependencies:
  - depanneur &gt;= 0.15</changelog>

</package>
<package pkgid="b986fef60719113ca4e5e21eefb965412a6998de1ca8fc97eace0eddec247037" name="build" arch="src">
    <version epoch="1" ver="20150115" rel="5.4"/>

<changelog author="adrian@suse.de" date="1298980800">- support new cross build initvm. Done by James Perkins from LinuxFoundation
- do not use loop device anymore when using block devices directly</changelog>
<changelog author="lnussel@suse.de" date="1301400000">- make sure default.conf is no stale symlink</changelog>
<changelog author="adrian@suse.de" date="1302868800">- switch back to single process build for debian to be conform with
  their policy
- use cpuid kvm64 on kvm for 64bit as workaround for a cpuid bug</changelog>
<changelog author="adrian@suse.de" date="1303905600">- revert to single cpu build default for debian packages</changelog>
<changelog author="adrian@suse.de" date="1305201600">- conflict with old bsdtar (not supporting --chroot)</changelog>
<changelog author="adrian@suse.de" date="1306324800">- allow to use simple spec file parser via Build::show</changelog>
<changelog author="adrian@suse.de" date="1307361600">- do not build ia64 baselibs packages for openSUSE anymore</changelog>
<changelog author="adrian@suse.de" date="1308312000">- support new kiwi command line mode</changelog>
<changelog author="adrian@suse.de" date="1309435200">- fixed kiwi execution call for some versions</changelog>
<changelog author="adrian@suse.de" date="1309521600">- compat mode for broken kiwi of openSUSE 11.4</changelog>
<changelog author="opensuse@cboltz.de" date="1312718400">- Requires:/Recommends: were part of the package description.
  Moved them to the correct place.</changelog>
<changelog author="adrian@suse.de" date="1317038400">- fixing kvm cpuid setting for AMD and Intel CPU's
- support new xen tools
- fixed qemu build initialisation</changelog>
<changelog author="adrian@suse.de" date="1317729600">- use new qemu-*-binfmt handler to run commands with correct $0
- fix build for Factory</changelog>
<changelog author="mls@suse.de" date="1318248000">- add sles11sp2 build config and adapt autodetection [bnc#711770]</changelog>
<changelog author="adrian@suse.de" date="1319544000">- use github.com as git repo now
- fix build for rpmv5</changelog>
<changelog author="adrian@suse.de" date="1329134400">- Support for openSUSE 12.2 (current factory)
- Support for crossbuild via Hostarch directive
- PPC KVM support
- swap space gets taken into account for ulimits
- Failure on not supported personality set</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1338638400">- https repo support
- clean up print info
- Refine-download-preinstall-install-progress-info</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1340193600">- bump to a new higher version to get this updated always
- clean up .src.cache file if --clean option specified</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1344686400">- update to version 2012.08.10</changelog>
<changelog author="qiang.z.zhang@intel.com" date="1347364800">- update to version 2012.09.11</changelog>

</package>
<package pkgid="fa70253d08db4dab4a411da41e5e1b8619851b232b91aa83a161f04a71f0a5c8" name="qemu-arm-static" arch="src">
    <version epoch="0" ver="1.6.0rc3" rel="5.1"/>

</package>
<package pkgid="eaa5140e4d451e194dcee4cf19408764c92306d850102e2b62a937ff854e9e03" name="depanneur" arch="src">
    <version epoch="0" ver="0.15" rel="4.1"/>

<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.1" date="1347364800">- first version of depanneur, including the following features:
  * dependency build wit correct dependendcy order
  * parallel build with customized threads pool
  * full build to specify a top dir of all packages tree
  * support generate local repo once build finished</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.2" date="1351080000">- fix getlogin() fail issue on some system
- add function worker_thread() to clean up build worker in one place
- refine incremental build, don't need force running gbs in top git dir
- support multiple spec files building in one package.
- fix Ctrl + C issue:
  - if one package build for a long time(&gt;15 mins), sudo req passwd again
  - sudo timeout issue, which will result in endless loop
- expand ~ in TIZEN_BUILD_ROOT, to fix create dir fail issue
- collect export error packages &amp; report, and return None 0 if any error occur
- support building one spec file for --spec option used in gbs build
- refine error report in depanneur. Three types of error: export error,
  expansion error and rpmbuild error, detail expansion info and build log are
  attached behind packages.
- dependency circle check: if circle found from package dependency, the circle
  link is printed and exit. currently, we don't support circle building.
  - break expand_deps into two functions: one is refresh_repo(), which is
    used to update %repo, which store repodata info, including 'provide' and
    'depend' info, and another fuction is expand_deps().
  - Add get_deps() to get direct dependency of specified package(specfile).
  - Using Depth-first search algorithrm to try to find circle
- use bsd_glob to replace glob to fix thread crash issue in openSUSE 12.2
  (perl 5.16)
- add --debug option for 'gbs export' if --debug specified
- Code cleanup
  - fix perlcritic's warning
  - remove useless sub wanted
  - remove useless variables in git_wantted
  - remove trailing spaces</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.2.1" date="1352721600">- Update dependency: depend on tizen-build &gt;= 2012.10.10.1</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.3" date="1353931200">- --noinit support
- Support build RPM packages for incremental build
- warning user and try again if umount failed for incremental build
- no need create/unpack tar ball for incremental build
- x86_64 support
- keep src rpm for each arch
- show build progress for multiple packages build
- Add --spec to support multi-spec project
- Add --define option to define macros for rpmbuild
- Modify SUDOV_PERIOD smaller (5 mins)
- Add more output info about building status
- Add --keep-packs to keep unused packages in buildroot</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.4" date="1358942400">- Refine build behavior: gbs build should not depend on local copy
- Use --target option for build script to build specified arch
- add depanneur_sudo and sudoers configure to avoid requesting passwd
- use the processors number instead of hard code 4 for parallel compile
- show package info for arch incompatible warning
- Add --no-patch-export option for source export
- supported arches clean up
- bug fix:
  - crash if specify a non-exist specfile with --spec option</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.5" date="1361448000">- Add --binary-from-file option to specify a package list file
- Change --binary-list option, accept a packages list separated by comma(,).
- Add --deps to build specified packages and all packages they depend
- Add --rdeps to build specified packages and all packages depend on them</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.6" date="1364212800">- fix createrepo option usage issue
- depend on new version of obs-build-2013.03.11
- depend on createrepo 0.9.9 for deltarpm support</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.7" date="1368532800">- avoid export multiple times for packages contails multiple spec files
- put all build roots in a individual directory, which can be mounted as tmpfs
  to speed up building
- Add statistical of each errors, including export/expansion/rpmbuild errors
- refine createrepo: add --update for if repodata already exists
- bug fix:
  - prereqs involved for dependency resolving
  - fix wrong @deps which contain version info
  - quote metacharacters in pattern to fix strip issue if metacharacters exist</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.8" date="1372680000">- create debug package by default
- refinement:
  - report circle in time
  - load dependency data during refresh repo, instead of during parsing every
    spec file
- bug fix:
  - get target arch from build conf if 'Target' is set in build config, which
    make gbs and remote obs generate the same arch for final RPM package
  - exit unexpectedly if circle exist
  - using higer version in different repo</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.9" date="1377000000">- Define the de-facto %opensuse_bs macro from OBS to be zero</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.10" date="1381924800">- Remove hard code of _rpmdir in build root, use chroot to detect instead
- Support comments (#) in binary-list file for --binary-from-file option
- Remove previous built rpm and srpm if new version has been built out</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.11" date="1386676800">- depend on latest build-20131112
- generate html report automatically
- refine build report summary:
  - add build log dir
  - always print the dirs of final build files
  - add succeeded packages number
- depend on initvm to register qemu handler
- add arm 64(aarch64) support</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.12" date="1394193600">- Fix export failed if packaging dir is symblic
- depend on new version build to fix binfmt handlers register issue
- Return error if arch is not compatible for build</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.13" date="1400673600">- Add a new --spec-commit option to support new orphan-packaging
  development model
- Add group metadata to local repodata if package-groups.rpm exists</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 0.13.1" date="1402574400">- ignore already finished packages for dependency resolving
- ignore already skipped packages for dependency resolving
- add gbs version infor in final build report
- depend on new obs-build to fix qemu arch64 issue</changelog>
<changelog author="Li Jinjing &lt;jinjingx.li@intel.com&gt; 0.14" date="1413374400">- fix build with --include-all on development branch(orphan-packaging mode)
- support --fallback-to-native option of gbs
- support --icecream option of gbs
- support new arch mips and mipsel for gbs
- support --skip-srcrpm option of gbs
- fix leaking of temporary files
- add rpm changelog
- add comments for core builder code</changelog>
<changelog author=".zhang@samsung.com&gt; 0.15" date="1457092800">- add --fail-fast option of gbs
- fix CentOS 7 require</changelog>

</package>
<package pkgid="27b4d47770b41a68dd8560cbf40fc149ef6c0a14f7af7cbae7b40391d77a9bdb" name="pristine-tar" arch="src">
    <version epoch="0" ver="1.33" rel="3.1"/>

<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 1.28" date="1368446400">- Version bump to 1.28</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 1.28" date="1370260800">- Fixes Bug #998
  * Mangle PAX headers when using posix tar format
  * Use posix tar format by default
  * implement tar format guessing</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 1.28" date="1377259200">- Remove all timestamps from extended PAX headers of posix tarballs</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 1.28" date="1385726400">- Workaround for broken pristine-tar branches in Tizen
  Makes it possible to checkout tarballs from certain broken pristine-tar
  branches created with buggy versions of Tizen pristine-tar on openSUSE.
- update packaging for new gbs release</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 1.30" date="1393502400">- Version bump to 1.30</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen/1.31-20140520" date="1400587200">- Version bump to 1.31</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen/1.32-20140915" date="1410782400">- Version bump to 1.32
- rpm packaging: fix build for CentOS 7</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen/1.32-20150212" date="1423742400">- Relax the tar dependency by allowing any version of tar to be used.
  It turned out that in Tizen we do not have the problem the version
  restriction was originally put for.</changelog>
<changelog author="Rong Jinhui &lt;jinhui.rong@samsung.com&gt; 1.33" date="1444737600">- Version bump to 1.33</changelog>

</package>
<package pkgid="fbdf1aef469e990d7a7ccc5543bc06fe3fb8d58bda37d6988488ce04fb84be14" name="librpm-tizen" arch="src">
    <version epoch="0" ver="4.11.0.1.tizen20140530" rel="5.1"/>

<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 4.10.91.tizen20121215" date="1361448000">- packaging: Drop bdb sources
- packaging: fix build for Fedora (18)
- packaging: disable autoprov</changelog>
<changelog author="Qiang Zhang &lt;qiang.z.zhang@intel.com&gt; 4.10.91.tizen20121215" date="1361534400">- packaging: fix build for CentOS</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 4.10.91.tizen20121215" date="1361793600">- packaging: Disable autoreq, too
- Ignore unknown internal scripts</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 4.10.91.tizen20121215" date="1361966400">- Enable lua
- update package Provide info
- Add a provide tag to make gbs depend on new changes
- packaging: fix Makefile
- Install Tizen macros</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 4.11.0.1.tizen20130304" date="1362657600">- Version bump to latest from Tizen</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 4.11.0.1.tizen20130618" date="1371556800">- Version bump to latest from Tizen 3.0</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 4.11.0.1.tizen20130618" date="1377086400">- fix segmentation fault error while parsing spec
- Bump the log level of "unexpanded script" msg
- Prevent execution of arbitrary scripts</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 4.11.0.1.tizen20130618" date="1380628800">- lua: fall through failed lua scripts
- lua: Enable Lua
- Ignore bad expressions in %if conditionals</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen-tools/4.11.0.1.tizen20130618-20140306" date="1394107200">- Fix build against Lua 5.2</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen-tools/4.11.0.1.tizen20140530-20140723" date="1406116800">- Rebase on latest Tizen 3.0
- packaging: enable lua 5.2 for openSUSE
- rpm-packaging: enable customized autoreq</changelog>

</package>
<package pkgid="6a2eba0419d8118b853b8db9f68497520a7bde24c9811b1f7d76bc17733a1a3c" name="repa" arch="src">
    <version epoch="0" ver="0.4" rel="1.6.1"/>

<changelog author="Ed Bartosh &lt;eduard.bartosh@intel.com&gt;" date="1376136000">- Initial packaging</changelog>
<changelog author="Ed Bartosh &lt;eduard.bartosh@intel.com&gt; 0.1.1" date="1395144000">- Fixed crash when rejecting broken package
- obs.py: Raise RepaException instead of ObsError
- Catch osc exceptions in obs.py:get_projects. Fixes TINF-480
- Add Submitter and commit id to SR comment. Fixes TINF-468
- Update man page regarding grouping. Fixes TINF-492
- Added docstring to show_images function
- Added obs and download urls to 'repa list' output
- Added --project command line option</changelog>
<changelog author="Ed Bartosh &lt;eduard.bartosh@intel.com&gt; 0.2" date="1400673600">- Implement --processes options for repa list (Fixes: #1762)
- obs/get_projects: retry OBS operations
- Reduce amount of information in repa list output
- Implement repa info (Fixes: #1195)
- Make project mandatory config option (Fixes: #1763)
- Add configuration file info to the man page (Fixes: #1764)
- Mention --section in man page
- Update repa version in the man page
- Update man regarding global options
- Repa list: show correct status for submissions with unresolvable packages
  (Fixes: #1776)
- Minor refactoring of get_status
- Get rid of --regexp command line option (Fixes: #1772)
- Implement Colorizer class
- Implement --colorize option (Fixes: #1765)
- Fixed formatting of output for repa list
- Implemented --showurls option (Fixes: #1789)
- list: Added 'blocked' status
- Added 'waiting for images' status to repa list output
- Fix check for common packages (Fixes: #1847)
- repa info: Fix build status reporting
- Create one SR for all packages in submission (Fixes: #1386)
- obs: Implement get_srs function
- Add -group suffix to the path
- obs.py: Refactored get_project API
- common.py: Introduced get_prerelease_projects API
- Implement repa diff
- Correct man page for accept and reject subcommands
- Convert repa.changes into rpm format
- group: disable publishing when aggregating packages</changelog>
<changelog author="Ed Bartosh &lt;ed@ed.fi.intel.com&gt; 0.3" date="1419249600">- group: disable publishing when aggregating packages
- Skip conflicting submissions when creating a group
- group: Implemented parallel package aggregating (Fixes: #1955)
- info: Excluded 'disabled' build status from the list
- list: Implement --ignore command line option
- create_sr: Fix unicode issue (Fixes: #1979, #TINF-618)
- group: Remove binary package check
- Implement --noaggregate command line and config option (Fixes: #1990)
- List all projects in submitrequest message
- Drop 'Commit' keyword from the submitrequest info
- Reworked repa diff (Fixes: #1869)
- Implement --base option for repa list
- Pylinted codebase
- Output SR for rejected/accepted submissions</changelog>
<changelog author="Ed Bartosh &lt;ed@ed.fi.intel.com&gt; 0.4" date="1457092800">- fix pylint error
- group: remove --force option
- Rename command info -&gt; show
- Implement rebuild subcommand
- Implement lock/unlock subcommand
- Implement remove subcommand
- list: add build time
- Implement --edit command line option</changelog>

</package>
<package pkgid="9c9b7f559d2ba0dbacbade2c8176dcfd9a4e895feaaa9e147f0b0322ff8ed667" name="git-buildpackage" arch="src">
    <version epoch="0" ver="0.6.27" rel="6.1"/>

<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 0.6.0git20130530" date="1377172800">- rpm: Improve logging in case of rpmlib error
- Add clean method to GitRepository class
- Add all_remotes option in git fetch command
- Add tags option in git push command
- rpm: print a warning if importing gbp-specific librpm fails
- rpm: implement a wrapper module for rpm lib
- rpm: simplify SpecFile._parse_filtered_spec()
- Fix pylint warnings, follow Markus' sugesstion
- rpm: enhance spec parsing error messages
- GitRepository/add_files: consistently update all tracked files
- GitRepository: Add refspec option to fetch method
- GitRepository: Add all option to pull method
- GitRepository: Add force option to push method</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 0.6.3" date="1382011200">- buildpackage: support 'commit' variable for VCS tags
- Clone a repository to a specific directory
- Fix gbs clone failure if repo url is like host:repo.git
- SpecFile.set_tag: change the default place for new tags
- remove 'repo' param to adapt to changes of write_patch_file
- pq: pass commit_info to format_patch()
- pq: pass commit_info to format_patch()
- pq.write_patch_file: drop unused argument
- pq: fix generation of series file
- common/pq: fix length of patch filenames
- buildpackage: refactor prefix handling
- tests: remove unused import in submodule tests
- tests: upper case global variables in submodule tests
- tests: add some docstrings to git submodule tests
- tests: use eq_ and ok_ from nose tools in submodule tests
- tests: use sanitize some submodule tests
- pq-rpm: don't overwrite patches in the same series
- pq: don't overwrite patches in the same series
- rpm: support guessing spec file from git treeish
- rpm.SpecFile: support parsing spec as raw text data
- rpm: minor docstring fixes
- rpm: change guess_spec() to return SpecFile object
- GitRepository.list_tree: add 'paths' option
- common/pq: support more flexible pq-branch naming
- pq-rpm: drop unused 'tries' option
- GitRepository: deprecate the get_remote_repos method
- GitRepository.has_remote_repo: use get_remotes method
- git: new class and method for remote repositories
- debian packaging: change to 1.0 source package format
- Version bump, rebase on top of 0.6.3
  * Disable cover-min-percentage setting of nose
  * docs: minor sgml syntax fix
- rpm tests: slight modificatin of import-srpm tests
- ComponentTestBase: use eq_() ok_() from nose.tools
- tests: add tests for git-import-orig-rpm
- ComponentTestBase: keep tmpdir if GBP_TESTS_NOCLEAN is in env
- ComponentTestBase: fix env restore in teardown
- config: restore mangled env in doctests
- import-orig-rpm: remove unneeded try-except
- import-orig-rpm: don't crash on invalid gbp.conf
- ComponentTestBase: more verbose output in case of branch mismatch
- rpm tests: test --filter option of git-import-srpm
- tests.testutils: add ls_zip() helper
- import-orig: rework sourcecode preparation and filtering
- import-orig: new function for filtering/re-packing sources
- buildpackage: fix handling of empty tarball prefix
- rpm: import orig: import readline in the common module
- import orig: import readline in the common module
- UpstreamSource.unpack: return UpstreamSource instance
- UpstreamSource.pack: reuse unpacked dir if no filter is used
- rpm: UpstreamSource: implement prefix guessing
- UpstreamSource: implement prefix guessing
- UpstreamSource: check that the sources exist
- UpstreamSource: store the absolute path
- rpm: UpstreamSource: move version guessing logic to PkgPolicy
- UpstreamSource: move version guessing logic to PkgPolicy
- UpstreamSource.guess_version: don't check for directories
- Fix `fatal: fetch --all does not take a repository argument`</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 0.6.6" date="1385985600">- Rebase on top of upstream version 0.6.6
- UpstreamSource: fix archive prefix guessing
- pq-rpm: create diff up to the last merge commit
  Before, merge commits broke patch generation, or, (most probably) caused
  the generated patches to be unapplicable (similar to how
  git-format-patch behaves).
  Now, changes up to the last merge commit are squashed into one diff if
  merge commits are found in the revision list from which patches are to
  be generated. Individual patches (one per commit) are generated from the
  last merge commit up to the exported revision.
- pq-rpm: magic word HEAD for patch-squashing
  When given as the squash-point, 'HEAD' translates to the end-commit.
  This allows one to configure gbp to always squash all commits into one
  monolithic diff.</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; 0.6.8" date="1389096000">- Rebase on top of upstream version 0.6.8</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen/0.6.8-20140306" date="1394107200">- Rebase on top of upstream version 0.6.8
- Introduce git-rpm-ch tool.
  Initial version of the git-rpm-ch tool which is intended for maintaining
  RPM changelogs. Supports both spec files and separate "OBS style"
  changelog files.
  Implement '--tag' command line option (and other related options for
  signing) for creating and tagging a release. These correspond the
  tagging options in git-buildpackage-rpm.
  The git-buildpackage-rpm tool does not commit anything to git. However,
  in rpm-ch the '--tag' option causes the changelog modifications (and,
  all other staged changes) to be committed to git before creating the
  tag. This makes it possible to create a release and document the
  packaging/release tag name in the rpm changelog.
- Changes to gbp-pq-rpm:
  * implement 'convert' subcommand.
    The new subcommand is intended to be a one-time-callable command for
    converting a package to use the "orphan-packaging" development model and
    git layout (where packaging files are maintained in a separate branch
    and code development in another branch).
  * implement '--import-files' command line option.
    For defining the packaging file(s) that will be imported into the
    development/patch-queue branch.
    By default, the local gbp conf files are imported (so that gbp sees the
    same settings on the development/pq branc as on the packaging branch).
    Files defined with this option will appear as one monolithic commit in
    the development/patch-queue branch.
  * implement --new-packaging-dir cmdline option.
    Used for setting the packaging directory to be used in the new orphan
    packaging branch. Defaults to --packaging-dir so that the gbp.conf files
    are more likely to work without modification.
  * fail gracefully on invalid config files
  * support '%(upstreamversion)s' as a replacable string in the pq branch
    name.
- Changes to git-buildpackage-rpm
  * patch-export from development branch.
    Adds git-buildpackage-rpm --patch-export support for the 'orphan
    packaging' development model (where packaging files and development sources are kept in separate
    branches).
    New functionality:
    1. If patch-export is enabled and gbp detects that the current branch
    has a development/patch-queue branch it exports the patches from there,
    instead of the tip of the packaging branch.
    2. If gbp detects that the current (or exported) branch is a
    development/patch-queue branch it automatically enables patch-export
    and exports packaging files from the base branch (instead of the
    development/patch-queue branch.
    Also, add a new '--git-patch-export-rev' command line option with which
    the user can explicitly set the treeish from which patches are generated
    (i.e. HEAD..&lt;patch-export-rev&gt;)
  * fix spec file vcs update when doing git-tag-only
  * change default export directory.
    So that the git working directory is not dirtied, by default.
- Changes ti git-import-orig-rpm:
  * disable --merge by default.
    Merging upstream to packaging does not usually make sense with rpm
    packages. Merely, it can create confusion cause unapplicable patches to
    be generated.
  * implement --create-missing-branches option.
  * implement automatic downloading.
    Automatically try to download the archive if the archive filename points
    to a remote location.
  * get archive from spec file.
    Try to get archive path/filename from spec file if no file name is given
    on the command line.  This should make version bumps more
    straightforward: just update version number in the spec file and run
    'git-import-orig-rpm'.
- git-import-orig: implement --create-missing-branches option.
- Fixes and new features in GitRepository class
  * GitRepository/get_commit_info: correctly handle file renames/copies.
  * GitRepository.create_branch: add 'force' option
  * GitRepository.archive: add 'paths' option
  * GitRepository/git_command: strip stderr output in case of error.
  * GitRepository/add_remote_repo: fix the 'tags' argument.
  * GitRepository: allow interactive commands.
  * GitRepository: fix the 'edit' mode in commit methods.
  * GitRepository.commit_files: add committer_info and edit arguments.
  * GitRepository.commit_all: add committer_info argument.
- Fixes and new features in internal rpm/spec support
  * rpm.SpecFile: add 'specpath' attribute
  * rpm: correctly handle 'NoSource' and 'NoPatch' tags in spec.
  * rpm: Implement spec_from_repo() helper function
  * rpm: track all "section" directives in spec file.
  * rpm: add gbp.rpm.changelog module.
    This new module contains basic containers and functionality for parsing
    and updating rpm changelogs. It is coupled with the rpm packaging policy
    class which now has definitions for rpm changelog formatting.
  * rpm: support for getting/setting changelog in spec.
    SpecFile objects now support reading and writing of the %changelog
    section.
  * rpm: store full path of spec file sources
- Fix detection of prefix directory in tarballs
  gbs import failed to import tarball properly if paths in the archive
  were prefixed with "./".</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen/0.6.12-20140521" date="1400673600">- Rebase on top of upstream version 0.6.12
- Changes in rpm-ch
  * add --message cmdline option
    For giving the text for new changelog entry/entries, skipping git commit
    messages entirely.
  * implement '--all' option
    If defined, git-rpm-ch uses all commits in the Git history. Also,
    '--since' option is omitted.
  * implement --color-scheme option
  * use name (string) as the entry author
  * internal refactoring
  * fix crash in guessing the start commit
- Changes in pq-rpm
  * implement --retain-history option
    With this option defined gbp tries to preserve the history when
    converting. That is, for each commit in the old branch create one
    corresponding commit in the new orphan packaging branch. This works by
    dumping packaging files and updating patches for each commit. However,
    empty commits are not generated - these are caused e.g. by changes in
    files that are ignored by patch-generation.
    NOTE! Only valid for the 'convert' action.
  * convert: don't try to commit empty set of patches
  * make sure we always get a sane author
  * slight unification of log messages
  * decrease (default) verbosity a bit
  * don't create pq branch when switching
- Changes in buildpackage-rpm
  * buildpackage-rpm: fix desktop notifications
  * buildpackage-rpm: remove --purge option
  * guess/parse spec as early as possible
- Documentation
  * Include man pages in RPM packages
  * Add -doc subpackage to RPM packaging
  * Build deb and rpm html docs in one docbook
  * A multitude of small cosmetic fixes
- Other misc. internal changes
  * GitRepository: implement create_tree() method
  * rpm: suppress some verbosity when updating patches in spec file
  * [ Li Jinjing ] Fix missing return value in get_current_branch method</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen/0.6.15-20140828" date="1409227200">- Rebase on top of upstream version 0.6.15
- Changes in buildpackage-rpm
  * new 'commitish' keyword for spec vcs tag
  * notify: catch RuntimeError when importing pynotify
  * fix exit code in case of GitRepositoryError
  * always create tarball for native packages
  * check submodules from the exported treeish
  * fix crash when running prebuild hook
  * always run cleaner hook
  * add --git-no-build option
  * don't crash on invalid vcs format strings
  * add '--git-native' option
  * remove some outdated/unnecessary exception handling
  * get rid of prepare_export_dir()
  * handle invalid keys in orig prefix
  * internal refactoring and fixes
- Changes in rpm-ch
  * implement --commit option
  * implement --commit-msg option
  * rpm-ch: implement --meta-bts option
  * rpm.policy: don't allow leading whitespace in bts meta tags
- docs: manpages for the rpm tools
- Misc. fixes and features
  * buildpackage: refactor tarball compression
  * gbp-dch: fix handling of the '--meta' option
  * import-orig-rpm: download tarball into parent directory
  * GitRepository/has_submodules: add treeish argument
  * tristate: implement __nonzero__() method
- Logging:
  * don't automatically setup gbp-specific logger
  * fix auto colorizing for custom streams
- Tests
  * multiple fixes and additions in ComponentTestBase class
  * testutils: add directories arg to ls_* functions
  * add unit tests for buildpackage-rpm
- Packaging
  * rpm-packaging: recommend/require unzip
  * recommend/require zipmerge
  * depend/recommend rpmbuild
  * [ Junchun Guan ] Add PKGBUILD to support arch linux
  * [ Li Jinjing ] rpm packaging: use macro for python binary</changelog>
<changelog author="Markus Lehtonen &lt;markus.lehtonen@linux.intel.com&gt; tizen/0.6.22-20150206" date="1423224000">- Rebase on top of upstream version 0.6.22
- Experimental support for BitBake
  * Introduce import-bb tool.
    This is the first tool in an effort of enabling gbp in the BitBake build
    environment. Gbp-import-bb is a tool for importing packages from a
    BitBake-based "combined" distro repository into individual per-package
    Git repositories.
  * Introduce pq-bb tool.
    This is a tool for managing patch-queues for packages maintained in the
    BitBake packaging format (.bb recipes).
  * Introduce buildpackage-bb tool.
    Initial version of the tool for building BitBake packages from Git.
    NOTE: The buildpackage-bb tool itself is able to operate even without an
    initialized BitBake build environment although the build likely fails in
    this case. However, this makes it possible to export the packaging meta
    data, for example.
  * Introcude clone-bb tool.
    This is a new tool for helping to clone remote per-package Git
    repositories when working in BitBake-based "full distro" build
    environment. This is useful in the case that individual packages are
    actually maintained in per-package Git repositories (like Tizen). That
    is, the full distro repository that the developer operates in is
    composed of the packaging meta data from the individual per-package
    repositories. When willing to contribute to a package the developer
    would use clone-bb to clone the correct per-package repository and make
    his changes there.
    NOTE: clone-bb uses GBP_PACKAGING_REPO variable to determine the remote
    repository URI. This variable should be defined in the package recipes
    in order to make clone-bb usable.
  * Introduce submit-bb tool.
    This is a Tizen-specific tool for creating and pushing special submit
    tags.
- pq-rpm: better error message
- buildpackage-rpm: look for remote upstream branches.
  Consider remote branches, too, while looking for the upstream branch
  when trying to guess if a package is native or not.
- rpm packaging changes
  * enable CentOS 7.
  * include python egg-info in -common.
- rpm: suppress stderr when unpacking src.rpm
- UpstreamSource: suppress stderr from tar in _determine_prefix()
- patchseries: strip numbering when guessing subject from filename
- Changes in logging
  * don't propagate to ancestor loggers
  * don't initialize handlers in GbpLogger init.
    Better compatibility with 3rd party modules that have their own logging
    initializations.
- Features/fixes in GitRepository
  * GitRepository/__git_inout: correctly handle input error
  * GitRepository.create_tag: add 'annotate' argument.
    For forcing the creation of annotated tags. Causes the an editor to be
    spawned if no message is given.</changelog>
<changelog author="Jun Wang &lt;junbill.wang@samsung.com&gt; tizen/0.6.27-20160302" date="1456920000">- Upgrade version to 0.6.27</changelog>

</package>

</otherdata>