[ 0s] Using BUILD_ROOT=/srv/build/root_4/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_4/root [ 0s] [ 0s] [ 0s] w24 started "build _service:gbs:popt.spec" at Fri Jan 6 15:25:31 UTC 2017. [ 0s] [ 0s] Building popt for project 'Tizen:3.0:Base' repository 'arm' arch 'armv7l' srcmd5 '5dac7e68079e8459975b4742852eebd0' [ 0s] [ 0s] processing specfile /srv/build/root_4/.build-srcdir/_service:gbs:popt.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_4/.build-srcdir/_service:gbs:popt.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_4/.build.rpmlist /srv/build/root_4/.build-srcdir/_service:gbs:popt.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] Copying qemu-fix-build-hang.sh [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 2s] [4/40] preinstalling glibc... [ 2s] [5/40] preinstalling libgcc... [ 2s] [6/40] preinstalling bash... [ 2s] [7/40] preinstalling diffutils... [ 2s] [8/40] preinstalling grep... [ 2s] [9/40] preinstalling libattr... [ 2s] [10/40] preinstalling libbz2... [ 2s] [11/40] preinstalling libcap... [ 2s] [12/40] preinstalling libelf... [ 2s] [13/40] preinstalling libfreebl3... [ 2s] [14/40] preinstalling liblua... [ 3s] [15/40] preinstalling liblzma... [ 3s] [16/40] preinstalling libncurses... [ 3s] [17/40] preinstalling libpopt... [ 3s] [18/40] preinstalling libsmack... [ 3s] [19/40] preinstalling libsqlite... [ 3s] [20/40] preinstalling libuuid... [ 3s] [21/40] preinstalling nspr... [ 3s] [22/40] preinstalling sed... [ 3s] [23/40] preinstalling zlib... [ 3s] [24/40] preinstalling qemu-accel-x86_64-armv7l... [ 6s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [26/40] preinstalling coreutils... [ 7s] [27/40] preinstalling libacl... [ 7s] [28/40] preinstalling libblkid... [ 7s] [29/40] preinstalling libreadline... [ 7s] [30/40] preinstalling smack... [ 7s] [31/40] preinstalling bzip2... [ 7s] [32/40] preinstalling libmagic... [ 7s] [33/40] preinstalling libxml2... [ 7s] [34/40] preinstalling libmount... [ 7s] [35/40] preinstalling tar... [ 7s] [36/40] preinstalling util-linux... [ 7s] [37/40] preinstalling util-linux-su... [ 7s] [38/40] preinstalling nss... [ 7s] [39/40] preinstalling libsoftokn3... [ 7s] [40/40] preinstalling rpm... [ 8s] [ 8s] [1/9] preinstalling libext2fs... [ 8s] [2/9] preinstalling libpcre... [ 8s] [3/9] preinstalling libsmartcols... [ 8s] [4/9] preinstalling libuuid... [ 8s] [5/9] preinstalling perl... [ 9s] [6/9] preinstalling grep... [ 9s] [7/9] preinstalling libblkid... [ 9s] [8/9] preinstalling libmount... [ 9s] [9/9] preinstalling util-linux... [ 9s] copying packages... [ 9s] reordering...cycle: libsoftokn3 -> nss [ 9s] breaking dependency nss -> libsoftokn3 [ 9s] done [ 21s] booting kvm ... [ 21s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 6000 -drive file=/srv/build/root_4/root,if=virtio,cache=none -drive file=/srv/build/root_4/root,if=ide,index=0,cache=none -drive file=/srv/build/root_4/swap,if=virtio,cache=none -smp 4 [ 22s] [ 0.000000] tsc: Fast TSC calibration failed [ 23s] doing fast boot [ 23s] Creating device nodes with udev [ 28s] Waiting for device /dev/vda to appear: ok [ 28s] fsck from util-linux 2.21.2 [ 28s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 29s] /dev/vda: clean, 5004/2392064 files, 261947/9568256 blocks [ 29s] fsck succeeded. Mounting root device read-write. [ 29s] Mounting root /dev/vda [ 29s] mount -o rw -t ext4 /dev/vda /root [ 32s] replacing /etc/mtab with symlink to /proc/self/mounts [ 41s] 2nd stage started in virtual machine [ 41s] machine type: armv7l [ 44s] swapon: /dev/vdb: found signature [pagesize=4096, signature=swap] [ 44s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 44s] swapon /dev/vdb [ 45s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 49s] mount: none is already mounted or /proc busy [ 49s] mount: none is already mounted or /dev/pts busy [ 49s] logging output to //.build.log... [ 49s] processing specfile /.build-srcdir/_service:gbs:popt.spec ... [ 50s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:popt.spec build rpmlint-Factory ... [ 59s] running qemu-linux-user-x86_64-cross postinstall script [ 61s] running qemu-accel-x86_64-armv7l postinstall script [ 61s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so': No such file or directory [ 61s] running setup postinstall script [ 62s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 62s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 62s] initializing rpm db... [ 70s] [1/89] installing libmagic-data-5.28-2.2 [ 70s] [2/89] installing setup-0.9-1.3 [ 71s] [3/89] installing terminfo-base-5.9-1.2 [ 71s] [4/89] installing filesystem-3.1-9.2 [ 73s] [5/89] installing glibc-2.20-2.2 [ 75s] [6/89] installing libatomic-4.9.2-3.1 [ 75s] [7/89] installing libgcc-4.9.2-3.1 [ 75s] [8/89] installing libgomp-4.9.2-3.1 [ 75s] [9/89] installing bash-3.2.57-1.2 [ 77s] [10/89] installing cpio-2.11-1.2 [ 77s] [11/89] installing diffutils-3.3-1.2 [ 78s] [12/89] installing findutils-4.3.8-1.2 [ 78s] [13/89] installing hostname-3.12-1.2 [ 78s] [14/89] installing libattr-2.4.47-2.2 [ 79s] [15/89] installing libbz2-1.0.6-1.14 [ 79s] [16/89] installing libcap-2.24-1.2 [ 80s] [17/89] installing libelf-0.153-1.12 [ 80s] [18/89] installing libext2fs-1.42.13-2.2 [ 80s] [19/89] installing libfreebl3-3.23-1.15 [ 80s] [20/89] installing libitm-4.9.2-3.1 [ 80s] [21/89] installing libltdl-2.4.2-1.2 [ 80s] [22/89] installing liblua-5.1.4-1.1 [ 81s] [23/89] installing liblzma-5.2.2-2.1 [ 81s] [24/89] installing libpcre-8.39-1.2 [ 81s] [25/89] installing libpopt-1.16-1.1 [ 82s] [26/89] installing libsmack-1.3.0-2.2 [ 82s] [27/89] installing libsmartcols-2.28-1.2 [ 82s] [28/89] installing libsqlite-3.8.10.2-1.1 [ 82s] [29/89] installing libstdc++-4.9.2-3.1 [ 82s] [30/89] installing libuuid-2.28-1.2 [ 82s] [31/89] installing m4-1.4.17-1.1 [ 82s] [32/89] installing net-tools-2.0_20121208git-1.2 [ 82s] [33/89] installing nspr-4.12-1.3 [ 82s] [34/89] installing patch-2.7-1.1 [ 82s] [35/89] installing pkg-config-0.28-1.2 [ 83s] [36/89] installing sed-4.1c-1.1 [ 83s] [37/89] installing update-alternatives-1.16.3-1.1 [ 83s] [38/89] installing which-2.20-1.1 [ 83s] [39/89] installing zlib-1.2.8-1.2 [ 83s] [40/89] installing libncurses-5.9-1.2 [ 83s] [41/89] installing build-compare-2015.04.28-2.8 [ 83s] [42/89] installing libstdc++-devel-4.9.2-3.1 [ 84s] [43/89] installing qemu-linux-user-x86_64-cross-2.7.0-1.2.1 [ 85s] [44/89] installing cpp-4.9.2-3.1 [ 86s] [45/89] installing gcc-c++-4.9.2-3.1 [ 88s] [46/89] installing binutils-2.25-1.6 [ 89s] [47/89] installing coreutils-6.9-1.2 [ 89s] [48/89] installing db4-4.8.30.NC-1.2 [ 89s] [49/89] installing gawk-3.1.5-1.2 [ 90s] [50/89] installing grep-2.5.2-1.2 [ 90s] [51/89] installing less-466-1.2 [ 90s] [52/89] installing libacl-2.2.52-1.2 [ 91s] [53/89] installing libasm-0.153-1.12 [ 91s] [54/89] installing libblkid-2.28-1.2 [ 91s] [55/89] installing libreadline-5.2-1.2 [ 92s] [56/89] installing libubsan-4.9.2-3.1 [ 92s] [57/89] installing make-4.0-1.1 [ 92s] [58/89] installing nss-certs-3.23-1.15 [ 92s] [59/89] installing smack-1.3.0-2.2 [ 92s] [60/89] installing bzip2-1.0.6-1.14 [ 92s] [61/89] installing libmagic-5.28-2.2 [ 93s] [62/89] installing libxml2-2.9.4-1.2 [ 93s] [63/89] installing xz-5.2.2-2.1 [ 93s] [64/89] installing libdw-0.153-1.12 [ 94s] [65/89] installing linux-glibc-devel-3.10-1.2 [ 94s] [66/89] installing file-5.28-2.2 [ 94s] [67/89] installing glibc-locale-2.20-2.2 [ 95s] [68/89] installing libmount-2.28-1.2 [ 95s] [69/89] installing tar-1.17-1.1 [ 95s] [70/89] installing gzip-1.3.12-1.2 [ 95s] [71/89] installing libfdisk1-2.28-1.2 [ 95s] [72/89] installing pam-1.1.6-2.2 [ 96s] [73/89] installing perl-5.20.0-1.12 [ 101s] [74/89] installing tzdata-2016i-2.1 [ 101s] [75/89] installing elfutils-0.153-1.12 [ 101s] [76/89] installing gcc-4.9.2-3.1 [ 102s] [77/89] installing build-mkbaselibs-20120927-1.2 [ 102s] [78/89] installing glibc-devel-2.20-2.2 [ 103s] [79/89] installing qemu-accel-x86_64-armv7l-0.4-4.7 [ 117s] [80/89] installing autoconf-2.69-1.3 [ 117s] [81/89] installing util-linux-2.28-1.2 [ 118s] [82/89] installing automake-1.14.1-1.2 [ 119s] [83/89] installing util-linux-su-2.28-1.2 [ 119s] [84/89] installing build-20120927-1.2 [ 122s] [85/89] installing libtool-2.4.2-1.2 [ 122s] [86/89] installing nss-3.23-1.15 [ 122s] [87/89] installing libsoftokn3-3.23-1.15 [ 123s] [88/89] installing rpm-4.11.0.1-2.2 [ 123s] [89/89] installing rpm-build-4.11.0.1-2.2 [ 123s] removing nis flags from //etc/nsswitch.conf... [ 123s] now finalizing build dir... [ 132s] build target is armv7l-tizen-linux [ 132s] ----------------------------------------------------------------- [ 132s] I have the following modifications for popt.spec: [ 132s] 4c4 [ 132s] < Release: 0 [ 132s] --- [ 132s] > Release: 1.2 [ 132s] ----------------------------------------------------------------- [ 132s] ----- building popt.spec (user abuild) [ 132s] ----------------------------------------------------------------- [ 132s] ----------------------------------------------------------------- [ 133s] Running qemu build hang workaround... [ 133s] /bin/ps command not found [ 133s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0:Base/arm/5dac7e68079e8459975b4742852eebd0-popt' /home/abuild/rpmbuild/SOURCES/popt.spec [ 133s] Building target platforms: armv7l-tizen-linux [ 133s] Building for target armv7l-tizen-linux [ 133s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.I4N4ws [ 133s] + umask 022 [ 133s] + cd /home/abuild/rpmbuild/BUILD [ 133s] + cd /home/abuild/rpmbuild/BUILD [ 133s] + rm -rf popt-1.16 [ 133s] + /bin/tar -xf - [ 133s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/popt-1.16.tar.bz2 [ 133s] + STATUS=0 [ 133s] + '[' 0 -ne 0 ']' [ 133s] + cd popt-1.16 [ 133s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 133s] + cp /home/abuild/rpmbuild/SOURCES/popt.manifest . [ 133s] + exit 0 [ 133s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.XGSmvi [ 133s] + umask 022 [ 133s] + cd /home/abuild/rpmbuild/BUILD [ 133s] + cd popt-1.16 [ 133s] ++ uname -m [ 133s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 133s] + LANG=C [ 133s] + export LANG [ 133s] + unset DISPLAY [ 133s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 133s] + export CFLAGS [ 133s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 133s] + export CXXFLAGS [ 133s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 133s] + export FFLAGS [ 133s] + LDFLAGS= [ 133s] + export LDFLAGS [ 133s] + LD_AS_NEEDED=1 [ 133s] + export LD_AS_NEEDED [ 133s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 133s] + export CFLAGS [ 133s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 133s] + export CXXFLAGS [ 133s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 133s] + export FFLAGS [ 133s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --with-pic --disable-static [ 133s] checking build system type... armv7l-tizen-linux-gnueabi [ 133s] checking host system type... armv7l-tizen-linux-gnueabi [ 133s] checking target system type... armv7l-tizen-linux-gnueabi [ 133s] checking for a BSD-compatible install... /bin/install -c [ 134s] checking whether build environment is sane... yes [ 134s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 134s] checking for gawk... gawk [ 135s] checking whether make sets $(MAKE)... yes [ 135s] checking whether to enable maintainer-specific portions of Makefiles... no [ 135s] checking for style of include used by make... GNU [ 135s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 135s] checking for C compiler default output file name... a.out [ 135s] checking whether the C compiler works... yes [ 135s] checking whether we are cross compiling... no [ 135s] checking for suffix of executables... [ 135s] checking for suffix of object files... o [ 135s] checking whether we are using the GNU C compiler... yes [ 135s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 135s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 135s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 135s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C99... -std=gnu99 [ 135s] checking for armv7l-tizen-linux-gnueabi-gcc -std=gnu99 option to accept ISO Standard C... (cached) -std=gnu99 [ 135s] checking for armv7l-tizen-linux-gnueabi-gcc... (cached) armv7l-tizen-linux-gnueabi-gcc [ 135s] checking whether we are using the GNU C compiler... (cached) yes [ 135s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... (cached) yes [ 135s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... (cached) none needed [ 135s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... (cached) gcc3 [ 135s] checking for a BSD-compatible install... /bin/install -c [ 135s] checking for a sed that does not truncate output... /bin/sed [ 135s] checking for grep that handles long lines and -e... /bin/grep [ 135s] checking for egrep... /bin/grep -E [ 135s] checking for fgrep... /bin/grep -F [ 135s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 135s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 135s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 135s] checking the name lister (/bin/nm -B) interface... BSD nm [ 135s] checking whether ln -s works... yes [ 135s] checking the maximum length of command line arguments... 1572864 [ 135s] checking whether the shell understands some XSI constructs... yes [ 135s] checking whether the shell understands "+="... yes [ 135s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 135s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 135s] checking for objdump... objdump [ 135s] checking how to recognize dependent libraries... pass_all [ 135s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 135s] checking for ar... ar [ 135s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 135s] checking for strip... strip [ 135s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 135s] checking for ranlib... ranlib [ 135s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 135s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 135s] checking for ANSI C header files... yes [ 136s] checking for sys/types.h... yes [ 136s] checking for sys/stat.h... yes [ 136s] checking for stdlib.h... yes [ 136s] checking for string.h... yes [ 136s] checking for memory.h... yes [ 136s] checking for strings.h... yes [ 136s] checking for inttypes.h... yes [ 136s] checking for stdint.h... yes [ 136s] checking for unistd.h... yes [ 136s] checking for dlfcn.h... yes [ 136s] checking for objdir... .libs [ 136s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 136s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 136s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 136s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 136s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 136s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 136s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 136s] checking whether -lc should be explicitly linked in... no [ 136s] checking dynamic linker characteristics... GNU/Linux ld.so [ 136s] checking how to hardcode library paths into programs... immediate [ 136s] checking whether stripping libraries is possible... yes [ 136s] checking if libtool supports shared libraries... yes [ 136s] checking whether to build shared libraries... yes [ 136s] checking whether to build static libraries... no [ 136s] checking whether armv7l-tizen-linux-gnueabi-gcc needs -traditional... no [ 136s] checking for special C compiler options needed for large files... no [ 136s] checking for _FILE_OFFSET_BITS value needed for large files... 64 [ 136s] checking for library containing strerror... none required [ 136s] checking for function prototypes... yes [ 136s] checking for string.h... (cached) yes [ 136s] checking float.h usability... yes [ 136s] checking float.h presence... yes [ 136s] checking for float.h... yes [ 136s] checking fnmatch.h usability... yes [ 136s] checking fnmatch.h presence... yes [ 136s] checking for fnmatch.h... yes [ 137s] checking glob.h usability... yes [ 137s] checking glob.h presence... yes [ 137s] checking for glob.h... yes [ 137s] checking langinfo.h usability... yes [ 137s] checking langinfo.h presence... yes [ 137s] checking for langinfo.h... yes [ 137s] checking libintl.h usability... yes [ 137s] checking libintl.h presence... yes [ 137s] checking for libintl.h... yes [ 137s] checking mcheck.h usability... yes [ 137s] checking mcheck.h presence... yes [ 137s] checking for mcheck.h... yes [ 137s] checking for unistd.h... (cached) yes [ 137s] checking for setreuid... yes [ 137s] checking for getuid... yes [ 137s] checking for geteuid... yes [ 137s] checking for iconv... yes [ 137s] checking for mtrace... yes [ 137s] checking for __secure_getenv... no [ 137s] checking for setregid... yes [ 138s] checking for stpcpy... yes [ 138s] checking for strerror... yes [ 138s] checking for vasprintf... yes [ 138s] checking for srandom... yes [ 138s] checking whether NLS is requested... yes [ 138s] checking for msgfmt... no [ 138s] checking for gmsgfmt... : [ 138s] checking for xgettext... no [ 138s] checking for msgmerge... no [ 138s] checking for ld used by GCC... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 138s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 138s] checking for shared library run path origin... done [ 138s] checking for CFPreferencesCopyAppValue... no [ 138s] checking for CFLocaleCopyCurrent... no [ 138s] checking for GNU gettext in libc... yes [ 138s] checking whether to use NLS... yes [ 138s] checking where the gettext function comes from... libc [ 138s] checking for iconv... yes [ 139s] checking for working iconv... yes [ 139s] configure: creating ./config.status [ 140s] config.status: creating po/Makefile.in [ 140s] config.status: creating m4/Makefile [ 140s] config.status: creating Doxyfile [ 140s] config.status: creating Makefile [ 140s] config.status: creating popt.pc [ 140s] config.status: creating popt.spec [ 140s] config.status: creating test-poptrc [ 140s] config.status: creating auto/Makefile [ 140s] config.status: creating auto/desc [ 140s] config.status: creating auto/types [ 140s] config.status: creating config.h [ 140s] config.status: executing depfiles commands [ 141s] config.status: executing libtool commands [ 141s] config.status: executing po-directories commands [ 141s] config.status: creating po/POTFILES [ 141s] config.status: creating po/Makefile [ 141s] + make -j4 [ 141s] make all-recursive [ 141s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/popt-1.16' [ 141s] Making all in po [ 141s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/popt-1.16/po' [ 141s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/popt-1.16/po' [ 141s] Making all in . [ 141s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/popt-1.16' [ 141s] /bin/sh ./libtool --tag=CC --mode=compile armv7l-tizen-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I. -I. -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -W -D_GNU_SOURCE -D_REENTRANT -MT popt.lo -MD -MP -MF .deps/popt.Tpo -c -o popt.lo popt.c [ 141s] /bin/sh ./libtool --tag=CC --mode=compile armv7l-tizen-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I. -I. -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -W -D_GNU_SOURCE -D_REENTRANT -MT poptparse.lo -MD -MP -MF .deps/poptparse.Tpo -c -o poptparse.lo poptparse.c [ 141s] /bin/sh ./libtool --tag=CC --mode=compile armv7l-tizen-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I. -I. -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -W -D_GNU_SOURCE -D_REENTRANT -MT poptconfig.lo -MD -MP -MF .deps/poptconfig.Tpo -c -o poptconfig.lo poptconfig.c [ 141s] /bin/sh ./libtool --tag=CC --mode=compile armv7l-tizen-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I. -I. -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -W -D_GNU_SOURCE -D_REENTRANT -MT popthelp.lo -MD -MP -MF .deps/popthelp.Tpo -c -o popthelp.lo popthelp.c [ 141s] libtool: compile: armv7l-tizen-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I. -I. -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -W -D_GNU_SOURCE -D_REENTRANT -MT popt.lo -MD -MP -MF .deps/popt.Tpo -c popt.c -fPIC -DPIC -o .libs/popt.o [ 141s] libtool: compile: armv7l-tizen-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I. -I. -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -W -D_GNU_SOURCE -D_REENTRANT -MT poptconfig.lo -MD -MP -MF .deps/poptconfig.Tpo -c poptconfig.c -fPIC -DPIC -o .libs/poptconfig.o [ 141s] libtool: compile: armv7l-tizen-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I. -I. -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -W -D_GNU_SOURCE -D_REENTRANT -MT popthelp.lo -MD -MP -MF .deps/popthelp.Tpo -c popthelp.c -fPIC -DPIC -o .libs/popthelp.o [ 141s] libtool: compile: armv7l-tizen-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I. -I. -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -W -D_GNU_SOURCE -D_REENTRANT -MT poptparse.lo -MD -MP -MF .deps/poptparse.Tpo -c poptparse.c -fPIC -DPIC -o .libs/poptparse.o [ 141s] poptconfig.c: In function 'poptReadConfigFile': [ 141s] poptconfig.c:399:9: warning: variable 'xx' set but not used [-Wunused-but-set-variable] [ 141s] int xx; [ 141s] ^ [ 141s] popt.c: In function 'execCommand': [ 141s] popt.c:483:9: warning: variable 'rc' set but not used [-Wunused-but-set-variable] [ 141s] int rc; [ 141s] ^ [ 141s] popthelp.c: In function 'singleOptionHelp': [ 141s] popthelp.c:325:9: warning: variable 'xx' set but not used [-Wunused-but-set-variable] [ 141s] int xx; [ 141s] ^ [ 141s] popthelp.c: In function 'singleTableHelp': [ 141s] popthelp.c:606:9: warning: variable 'xx' set but not used [-Wunused-but-set-variable] [ 141s] int xx; [ 141s] ^ [ 141s] popthelp.c: In function 'showHelpIntro': [ 141s] popthelp.c:647:9: warning: variable 'xx' set but not used [-Wunused-but-set-variable] [ 141s] int xx; [ 141s] ^ [ 141s] popthelp.c: In function 'poptPrintHelp': [ 141s] popthelp.c:666:9: warning: variable 'xx' set but not used [-Wunused-but-set-variable] [ 141s] int xx; [ 141s] ^ [ 141s] mv -f .deps/poptparse.Tpo .deps/poptparse.Plo [ 141s] /bin/sh ./libtool --tag=CC --mode=compile armv7l-tizen-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I. -I. -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -W -D_GNU_SOURCE -D_REENTRANT -MT poptint.lo -MD -MP -MF .deps/poptint.Tpo -c -o poptint.lo poptint.c [ 141s] libtool: compile: armv7l-tizen-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I. -I. -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -W -D_GNU_SOURCE -D_REENTRANT -MT poptint.lo -MD -MP -MF .deps/poptint.Tpo -c poptint.c -fPIC -DPIC -o .libs/poptint.o [ 141s] mv -f .deps/poptconfig.Tpo .deps/poptconfig.Plo [ 141s] armv7l-tizen-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I. -I. -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -W -D_GNU_SOURCE -D_REENTRANT -MT test1.o -MD -MP -MF .deps/test1.Tpo -c -o test1.o test1.c [ 141s] test1.c:164:35: warning: suggest parentheses around arithmetic in operand of '|' [-Wparentheses] [ 141s] { "bits", '\0', POPT_ARG_BITSET|POPT_ARGFLAG_DOC_HIDDEN, &aBits, 0, [ 141s] ^ [ 141s] mv -f .deps/poptint.Tpo .deps/poptint.Plo [ 141s] armv7l-tizen-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I. -I. -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -W -D_GNU_SOURCE -D_REENTRANT -MT test2.o -MD -MP -MF .deps/test2.Tpo -c -o test2.o test2.c [ 141s] mv -f .deps/test1.Tpo .deps/test1.Po [ 141s] armv7l-tizen-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -I. -I. -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -W -D_GNU_SOURCE -D_REENTRANT -MT tdict.o -MD -MP -MF .deps/tdict.Tpo -c -o tdict.o tdict.c [ 141s] mv -f .deps/test2.Tpo .deps/test2.Po [ 141s] mv -f .deps/popthelp.Tpo .deps/popthelp.Plo [ 141s] mv -f .deps/tdict.Tpo .deps/tdict.Po [ 141s] mv -f .deps/popt.Tpo .deps/popt.Plo [ 141s] /bin/sh ./libtool --tag=CC --mode=link armv7l-tizen-linux-gnueabi-gcc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -W -D_GNU_SOURCE -D_REENTRANT -no-undefined -Wl,--version-script=./libpopt.vers -o libpopt.la -rpath /usr/lib popt.lo poptparse.lo poptconfig.lo popthelp.lo poptint.lo [ 141s] libtool: link: armv7l-tizen-linux-gnueabi-gcc -shared .libs/popt.o .libs/poptparse.o .libs/poptconfig.o .libs/popthelp.o .libs/poptint.o -Wl,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wl,--version-script=./libpopt.vers -Wl,-soname -Wl,libpopt.so.0 -o .libs/libpopt.so.0.0.0 [ 141s] libtool: link: (cd ".libs" && rm -f "libpopt.so.0" && ln -s "libpopt.so.0.0.0" "libpopt.so.0") [ 141s] libtool: link: (cd ".libs" && rm -f "libpopt.so" && ln -s "libpopt.so.0.0.0" "libpopt.so") [ 142s] libtool: link: ( cd ".libs" && rm -f "libpopt.la" && ln -s "../libpopt.la" "libpopt.la" ) [ 142s] /bin/sh ./libtool --tag=CC --mode=link armv7l-tizen-linux-gnueabi-gcc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -W -D_GNU_SOURCE -D_REENTRANT -o test1 test1.o libpopt.la [ 142s] /bin/sh ./libtool --tag=CC --mode=link armv7l-tizen-linux-gnueabi-gcc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -W -D_GNU_SOURCE -D_REENTRANT -o test2 test2.o libpopt.la [ 142s] /bin/sh ./libtool --tag=CC --mode=link armv7l-tizen-linux-gnueabi-gcc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -W -D_GNU_SOURCE -D_REENTRANT -o tdict tdict.o libpopt.la [ 142s] libtool: link: armv7l-tizen-linux-gnueabi-gcc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -W -D_GNU_SOURCE -D_REENTRANT -o .libs/test1 test1.o ./.libs/libpopt.so [ 142s] libtool: link: armv7l-tizen-linux-gnueabi-gcc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -W -D_GNU_SOURCE -D_REENTRANT -o .libs/test2 test2.o ./.libs/libpopt.so [ 142s] libtool: link: armv7l-tizen-linux-gnueabi-gcc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -W -D_GNU_SOURCE -D_REENTRANT -o .libs/tdict tdict.o ./.libs/libpopt.so [ 142s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/popt-1.16' [ 142s] Making all in auto [ 142s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/popt-1.16/auto' [ 142s] make[2]: Nothing to be done for 'all'. [ 142s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/popt-1.16/auto' [ 142s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/popt-1.16' [ 142s] + exit 0 [ 142s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.mLNz6E [ 142s] + umask 022 [ 142s] + cd /home/abuild/rpmbuild/BUILD [ 142s] + cd popt-1.16 [ 142s] + LANG=C [ 142s] + export LANG [ 142s] + unset DISPLAY [ 142s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm [ 142s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm [ 142s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm install [ 142s] /bin/make install-recursive [ 142s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/popt-1.16' [ 142s] Making install in po [ 142s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/popt-1.16/po' [ 142s] /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share [ 142s] installing cs.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/cs/LC_MESSAGES/popt.mo [ 142s] installing da.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/da/LC_MESSAGES/popt.mo [ 142s] installing de.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/de/LC_MESSAGES/popt.mo [ 142s] installing eo.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/eo/LC_MESSAGES/popt.mo [ 142s] installing es.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/es/LC_MESSAGES/popt.mo [ 142s] installing fi.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/fi/LC_MESSAGES/popt.mo [ 142s] installing fr.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/fr/LC_MESSAGES/popt.mo [ 142s] installing ga.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/ga/LC_MESSAGES/popt.mo [ 142s] installing gl.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/gl/LC_MESSAGES/popt.mo [ 142s] installing hu.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/hu/LC_MESSAGES/popt.mo [ 142s] installing id.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/id/LC_MESSAGES/popt.mo [ 142s] installing is.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/is/LC_MESSAGES/popt.mo [ 142s] installing it.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/it/LC_MESSAGES/popt.mo [ 142s] installing ja.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/ja/LC_MESSAGES/popt.mo [ 142s] installing ko.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/ko/LC_MESSAGES/popt.mo [ 142s] installing lv.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/lv/LC_MESSAGES/popt.mo [ 142s] installing nb.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/nb/LC_MESSAGES/popt.mo [ 142s] installing nl.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/nl/LC_MESSAGES/popt.mo [ 143s] installing pl.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/pl/LC_MESSAGES/popt.mo [ 144s] installing pt.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/pt/LC_MESSAGES/popt.mo [ 144s] installing ro.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/ro/LC_MESSAGES/popt.mo [ 144s] installing ru.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/ru/LC_MESSAGES/popt.mo [ 144s] installing sk.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/sk/LC_MESSAGES/popt.mo [ 144s] installing sl.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/sl/LC_MESSAGES/popt.mo [ 144s] installing sv.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/sv/LC_MESSAGES/popt.mo [ 144s] installing th.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/th/LC_MESSAGES/popt.mo [ 144s] installing tr.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/tr/LC_MESSAGES/popt.mo [ 144s] installing uk.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/uk/LC_MESSAGES/popt.mo [ 144s] installing vi.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/vi/LC_MESSAGES/popt.mo [ 144s] installing wa.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/wa/LC_MESSAGES/popt.mo [ 144s] installing zh_TW.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/zh_TW/LC_MESSAGES/popt.mo [ 144s] installing zh_CN.gmo as /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/locale/zh_CN/LC_MESSAGES/popt.mo [ 144s] if test "popt" = "gettext-tools"; then \ [ 144s] /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/gettext/po; \ [ 144s] for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ [ 144s] /bin/install -c -m 644 ./$file \ [ 144s] /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/gettext/po/$file; \ [ 144s] done; \ [ 144s] for file in Makevars; do \ [ 144s] rm -f /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/gettext/po/$file; \ [ 144s] done; \ [ 144s] else \ [ 144s] : ; \ [ 144s] fi [ 144s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/popt-1.16/po' [ 144s] Making install in . [ 144s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/popt-1.16' [ 144s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/popt-1.16' [ 144s] make[3]: Nothing to be done for 'install-exec-am'. [ 144s] test -z "/usr/include" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/include" [ 144s] /bin/install -c -m 644 popt.h '/home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/include' [ 144s] test -z "/usr/share/man/man3" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/man/man3" [ 144s] /bin/install -c -m 644 popt.3 '/home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/man/man3' [ 144s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/lib/pkgconfig" [ 144s] /bin/install -c -m 644 popt.pc '/home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/lib/pkgconfig' [ 144s] test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/lib" [ 144s] /bin/sh ./libtool --mode=install /bin/install -c libpopt.la '/home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/lib' [ 144s] libtool: install: /bin/install -c .libs/libpopt.so.0.0.0 /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/lib/libpopt.so.0.0.0 [ 144s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/lib && { ln -s -f libpopt.so.0.0.0 libpopt.so.0 || { rm -f libpopt.so.0 && ln -s libpopt.so.0.0.0 libpopt.so.0; }; }) [ 144s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/lib && { ln -s -f libpopt.so.0.0.0 libpopt.so || { rm -f libpopt.so && ln -s libpopt.so.0.0.0 libpopt.so; }; }) [ 144s] libtool: install: /bin/install -c .libs/libpopt.lai /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/lib/libpopt.la [ 144s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 144s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/popt-1.16' [ 144s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/popt-1.16' [ 144s] Making install in auto [ 144s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/popt-1.16/auto' [ 144s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/popt-1.16/auto' [ 144s] make[3]: Nothing to be done for 'install-exec-am'. [ 144s] make[3]: Nothing to be done for 'install-data-am'. [ 144s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/popt-1.16/auto' [ 144s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/popt-1.16/auto' [ 144s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/popt-1.16' [ 144s] + rm -f /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/info/dir [ 144s] + find /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm -regex '.*\.la$' [ 144s] + xargs rm -f -- [ 144s] + find /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm -regex '.*\.a$' [ 144s] + xargs rm -f -- [ 144s] + /usr/lib/rpm/find-lang.sh /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm popt [ 144s] find: `/home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/help/': No such file or directory [ 144s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/popt-1.16 [ 145s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/lib/libpopt.so.0.0.0 [ 146s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 146s] cpio: glibc-2.20/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 146s] cpio: glibc-2.20/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 146s] 307 blocks [ 147s] + /usr/lib/rpm/check-buildroot [ 147s] + /usr/lib/rpm//brp-compress [ 147s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 147s] + /usr/lib/rpm/brp-python-hardlink [ 147s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm [ 147s] Processing files: popt-debugsource-1.16-1.2.armv7l [ 147s] Provides: popt-debugsource = 1.16-1.2 popt-debugsource(armv7l-32) = 1.16-1.2 [ 147s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 147s] Processing files: libpopt-1.16-1.2.armv7l [ 147s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 147s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 147s] [ 147s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.1N4RNk [ 147s] + umask 022 [ 147s] + cd /home/abuild/rpmbuild/BUILD [ 147s] + cd popt-1.16 [ 147s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/licenses/libpopt [ 147s] + export LICENSEDIR [ 147s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/licenses/libpopt [ 147s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/licenses/libpopt [ 147s] + exit 0 [ 147s] Provides: libpopt = 1.16-1.2 libpopt(armv7l-32) = 1.16-1.2 libpopt.so.0 libpopt.so.0(LIBPOPT_0) popt = 1.16 [ 147s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 147s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 147s] Requires(post): /sbin/ldconfig [ 147s] Requires(postun): /sbin/ldconfig [ 147s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.8) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) rtld(GNU_HASH) [ 147s] Obsoletes: popt < 1.16 [ 147s] Processing files: popt-devel-1.16-1.2.armv7l [ 147s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 147s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 147s] [ 147s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.UwbYD0 [ 147s] + umask 022 [ 147s] + cd /home/abuild/rpmbuild/BUILD [ 147s] + cd popt-1.16 [ 147s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/doc/packages/popt-devel [ 147s] + export DOCDIR [ 147s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/doc/packages/popt-devel [ 147s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm/usr/share/doc/packages/popt-devel [ 147s] + exit 0 [ 147s] Provides: pkgconfig(popt) = 1.16 popt-devel = 1.16-1.2 popt-devel(armv7l-32) = 1.16-1.2 [ 147s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 147s] Requires: /usr/bin/pkg-config libpopt.so.0 [ 147s] Processing files: popt-locale-1.16-1.2.noarch [ 147s] Provides: popt-lang-all = 1.16 popt-locale = 1.16-1.2 [ 147s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 147s] Processing files: libpopt-debuginfo-1.16-1.2.armv7l [ 147s] Provides: libpopt-debuginfo = 1.16-1.2 libpopt-debuginfo(armv7l-32) = 1.16-1.2 [ 147s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 147s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm [ 147s] warning: Could not canonicalize hostname: w24 [ 147s] Wrote: /home/abuild/rpmbuild/SRPMS/popt-1.16-1.2.src.rpm [ 147s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/popt-debugsource-1.16-1.2.armv7l.rpm [ 147s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpopt-1.16-1.2.armv7l.rpm [ 147s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/popt-devel-1.16-1.2.armv7l.rpm [ 147s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/popt-locale-1.16-1.2.noarch.rpm [ 147s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpopt-debuginfo-1.16-1.2.armv7l.rpm [ 147s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.hJazoY [ 147s] + umask 022 [ 147s] + cd /home/abuild/rpmbuild/BUILD [ 147s] + cd popt-1.16 [ 147s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/popt-1.16-1.2.arm [ 147s] + exit 0 [ 147s] ... checking for files with abuild user/group [ 147s] ... creating baselibs [ 148s] no targets for arch armv7l, nothing to do [ 148s] ... comparing built packages with the former built [ 149s] /usr/lib/build/pkg-diff.sh [ 149s] /usr/lib/build/same-build-result.sh: line 36: is_prerelease_project: command not found [ 149s] This is a prerelease project. Do not check the existence of source rpm files. [ 149s] compare /.build.oldpackages/libpopt-1.16-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpopt-1.16-1.2.armv7l.rpm [ 149s] Comparing libpopt-1.16-1.1.armv7l.rpm to libpopt-1.16-1.2.armv7l.rpm [ 149s] This is not a prerelease project. Compare the project name. [ 149s] comparing rpmtags [ 149s] --- /tmp/tmp.hDIFLz5396/tmp.KgymPe5414 2017-01-06 15:27:59.553171873 +0000 [ 149s] +++ /tmp/tmp.hDIFLz5396/tmp.fUJcrk5416 2017-01-06 15:27:59.561171873 +0000 [ 149s] @@ -11,7 +11,7 @@ [ 149s] X11 X11 [ 149s] Base/Libraries http://www.rpm5.org/ (none) (none) (none) [ 149s] (none) 4.11.0.1 armv7l-tizen-linux [ 149s] - cpio lzma 5 [ 149s] + cpio xz 5T [ 149s] [ 149s] 1363953600 @220ef52 - Fixed package groups [ 149s] obs://build.tizen.org/Tizen:3.0:Base/arm/5dac7e68079e8459975b4742852eebd0-popt Tizen:3.0:Base / arm [ 149s] RPM meta information is different [ 149s] compare /.build.oldpackages/libpopt-debuginfo-1.16-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpopt-debuginfo-1.16-1.2.armv7l.rpm [ 149s] skipping -debuginfo package [ 149s] compare /.build.oldpackages/popt-debugsource-1.16-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/popt-debugsource-1.16-1.2.armv7l.rpm [ 149s] Comparing popt-debugsource-1.16-1.1.armv7l.rpm to popt-debugsource-1.16-1.2.armv7l.rpm [ 149s] This is not a prerelease project. Compare the project name. [ 149s] comparing rpmtags [ 149s] --- /tmp/tmp.SoPTWf5436/tmp.XTpZAz5454 2017-01-06 15:27:59.993171884 +0000 [ 149s] +++ /tmp/tmp.SoPTWf5436/tmp.FPoono5456 2017-01-06 15:28:00.001171884 +0000 [ 149s] @@ -7,7 +7,7 @@ [ 149s] X11 X11 [ 149s] Development/Debug http://www.rpm5.org/ (none) (none) (none) [ 149s] (none) 4.11.0.1 armv7l-tizen-linux [ 149s] - cpio lzma 5 [ 149s] + cpio xz 5T [ 149s] [ 149s] 1363953600 @220ef52 - Fixed package groups [ 149s] obs://build.tizen.org/Tizen:3.0:Base/arm/5dac7e68079e8459975b4742852eebd0-popt Tizen:3.0:Base / arm [ 149s] RPM meta information is different [ 149s] compare /.build.oldpackages/popt-devel-1.16-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/popt-devel-1.16-1.2.armv7l.rpm [ 150s] Comparing popt-devel-1.16-1.1.armv7l.rpm to popt-devel-1.16-1.2.armv7l.rpm [ 150s] This is not a prerelease project. Compare the project name. [ 150s] comparing rpmtags [ 150s] --- /tmp/tmp.apwWlw5474/tmp.fjhnZa5492 2017-01-06 15:28:00.329171892 +0000 [ 150s] +++ /tmp/tmp.apwWlw5474/tmp.armBft5494 2017-01-06 15:28:00.341171893 +0000 [ 150s] @@ -7,7 +7,7 @@ [ 150s] X11 X11 [ 150s] Development/Libraries http://www.rpm5.org/ (none) (none) (none) [ 150s] (none) 4.11.0.1 armv7l-tizen-linux [ 150s] - cpio lzma 5 [ 150s] + cpio xz 5T [ 150s] [ 150s] 1363953600 @220ef52 - Fixed package groups [ 150s] obs://build.tizen.org/Tizen:3.0:Base/arm/5dac7e68079e8459975b4742852eebd0-popt Tizen:3.0:Base / arm [ 150s] RPM meta information is different [ 150s] compare /.build.oldpackages/popt-locale-1.16-1.1.noarch.rpm /home/abuild/rpmbuild/RPMS/noarch/popt-locale-1.16-1.2.noarch.rpm [ 150s] Comparing popt-locale-1.16-1.1.noarch.rpm to popt-locale-1.16-1.2.noarch.rpm [ 150s] This is not a prerelease project. Compare the project name. [ 150s] comparing rpmtags [ 150s] --- /tmp/tmp.viyuFe5512/tmp.kvhMyJ5530 2017-01-06 15:28:00.617171900 +0000 [ 150s] +++ /tmp/tmp.viyuFe5512/tmp.XmfOhg5532 2017-01-06 15:28:00.625171900 +0000 [ 150s] @@ -5,7 +5,7 @@ [ 150s] X11 X11 [ 150s] Base/Libraries http://www.rpm5.org/ (none) (none) (none) [ 150s] (none) 4.11.0.1 armv7l-tizen-linux [ 150s] - cpio lzma 5 [ 150s] + cpio xz 5T [ 150s] [ 150s] 1363953600 @220ef52 - Fixed package groups [ 150s] obs://build.tizen.org/Tizen:3.0:Base/arm/5dac7e68079e8459975b4742852eebd0-popt Tizen:3.0:Base / arm [ 150s] RPM meta information is different [ 150s] do not compare rpmlint.log if it is a prerelease project! [ 150s] ... saving built statistics [ 150s] ... saving built packages [ 150s] /home/abuild/rpmbuild/RPMS/armv7l/libpopt-1.16-1.2.armv7l.rpm [ 150s] /home/abuild/rpmbuild/RPMS/armv7l/libpopt-debuginfo-1.16-1.2.armv7l.rpm [ 150s] /home/abuild/rpmbuild/RPMS/armv7l/popt-debugsource-1.16-1.2.armv7l.rpm [ 150s] /home/abuild/rpmbuild/RPMS/armv7l/popt-devel-1.16-1.2.armv7l.rpm [ 150s] /home/abuild/rpmbuild/RPMS/noarch/popt-locale-1.16-1.2.noarch.rpm [ 150s] /home/abuild/rpmbuild/SRPMS/popt-1.16-1.2.src.rpm [ 150s] /home/abuild/rpmbuild/OTHER/_statistics [ 150s] [ 150s] w24 finished "build popt.spec" at Fri Jan 6 15:28:01 UTC 2017. [ 150s] [ 154s] [ 131.183274] SysRq : Power Off [ 154s] [ 131.292259] Power down. [ 154s] build: extracting built packages... [ 154s] libpopt-1.16-1.2.armv7l.rpm [ 154s] libpopt-debuginfo-1.16-1.2.armv7l.rpm [ 154s] popt-debugsource-1.16-1.2.armv7l.rpm [ 154s] popt-devel-1.16-1.2.armv7l.rpm [ 154s] popt-locale-1.16-1.2.noarch.rpm [ 154s] popt-1.16-1.2.src.rpm [ 154s] _statistics Retried build at Fri Mar 10 21:11:30 2017 returned same result, skipped Retried build at Fri Mar 31 14:38:21 2017 returned same result, skipped Retried build at Fri Apr 7 14:49:55 2017 returned same result, skipped