[ 0s] Using BUILD_ROOT=/srv/build/root_2/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_2/root [ 0s] [ 0s] [ 0s] w14 started "build dracut.spec" at Thu Jun 27 20:30:54 UTC 2013. [ 0s] [ 0s] Building dracut for project 'Tizen:IVI' repository 'standard' arch 'i586' srcmd5 '4594a2dd6e25c50c7ecc9331778f58c9' [ 0s] [ 0s] processing specfile /srv/build/root_2/.build-srcdir/dracut.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_2/.build-srcdir/dracut.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_2/.build.rpmlist /srv/build/root_2/.build-srcdir/dracut.spec build rpmlint-Factory ... [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/34] preinstalling libmagic-data... [ 1s] [2/34] preinstalling setup... [ 1s] [3/34] preinstalling filesystem... [ 1s] [4/34] preinstalling glibc... [ 1s] [5/34] preinstalling bash... [ 1s] [6/34] preinstalling diffutils... [ 1s] [7/34] preinstalling grep... [ 1s] [8/34] preinstalling libattr... [ 1s] [9/34] preinstalling libbz2... [ 1s] [10/34] preinstalling libcap... [ 1s] [11/34] preinstalling libelf... [ 1s] [12/34] preinstalling libfreebl3... [ 1s] [13/34] preinstalling liblua... [ 1s] [14/34] preinstalling liblzma... [ 1s] [15/34] preinstalling libncurses... [ 1s] [16/34] preinstalling libpopt... [ 1s] [17/34] preinstalling libsmack... [ 1s] [18/34] preinstalling libsqlite... [ 1s] [19/34] preinstalling nspr... [ 1s] [20/34] preinstalling sed... [ 1s] [21/34] preinstalling tar... [ 1s] [22/34] preinstalling zlib... [ 1s] [23/34] preinstalling libacl... [ 1s] [24/34] preinstalling libgcc47... [ 1s] [25/34] preinstalling libreadline... [ 1s] [26/34] preinstalling smack... [ 1s] [27/34] preinstalling bzip2... [ 1s] [28/34] preinstalling libmagic... [ 2s] [29/34] preinstalling libxml2... [ 2s] [30/34] preinstalling coreutils... [ 2s] [31/34] preinstalling nss... [ 2s] [32/34] preinstalling libsoftokn3... [ 2s] [33/34] preinstalling rpm... [ 2s] [34/34] preinstalling rpm-security-plugin... [ 2s] [ 2s] [1/8] preinstalling libext2fs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling perl... [ 3s] [5/8] preinstalling grep... [ 3s] [6/8] preinstalling libblkid... [ 3s] [7/8] preinstalling libmount... [ 3s] [8/8] preinstalling util-linux... [ 3s] copying packages... [ 4s] reordering...cycle: coreutils -> pam [ 4s] breaking dependency pam -> coreutils [ 4s] cycle: nss -> libsoftokn3 [ 4s] breaking dependency nss -> libsoftokn3 [ 4s] done [ 4s] booting kvm ... [ 4s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -net none -cpu host -kernel /srv/kernel/vmlinuz -initrd /srv/kernel/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm -m 8192 -drive file=/srv/build/root_2/root,if=virtio,cache=unsafe -drive file=/srv/build/root_2/root,if=ide,index=0,cache=unsafe -drive file=/srv/build/root_2/swap,if=virtio,cache=unsafe -smp 4 [ 5s]  [ 5s] Google, Inc. [ 5s] Serial Graphics Adapter 09/05/12 [ 5s] SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (abuild@build24) Wed Sep 5 14:01:11 UTC 2012 [ 5s] 4 0 [ 5s]  SeaBIOS (version 1.6.3-20120905_140109) [ 5s] [ 5s] Booting from ROM... [ 8s] doing fast boot [ 8s] Creating device nodes with udev [ 8s] udevd[221]: failed to execute '/etc/sysconfig/network/scripts/ifup-sysctl' '/etc/sysconfig/network/scripts/ifup-sysctl lo -o hotplug': No such file or directory [ 8s] [ 9s] Waiting for device /dev/vda to appear: ok [ 9s] fsck from util-linux 2.20.1 [ 9s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 9s] /dev/vda: clean, 5169/2097152 files, 181980/8388608 blocks [ 9s] fsck succeeded. Mounting root device read-write. [ 9s] Mounting root /dev/vda [ 9s] mount -o rw,noatime,acl,user_xattr -t ext4 /dev/vda /root [ 9s] replacing /etc/mtab with symlink to /proc/self/mounts [ 9s] sh: /sbin/modprobe: No such file or directory [ 9s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 8: interpreter '/usr/bin/qemu-arm-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 9: interpreter '/usr/bin/qemu-armeb-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 10: interpreter '/usr/bin/qemu-ppc-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 11: interpreter '/usr/bin/qemu-mips-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 12: interpreter '/usr/bin/qemu-mipsel-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 18: interpreter '/usr/bin/qemu-sh4-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 19: interpreter '/usr/bin/qemu-sh4eb-binfmt' not found, ignoring [ 9s] 2nd stage started in virtual machine [ 9s] machine type: x86_64 [ 9s] switching personality to 8... [ 9s] 2nd stage started in virtual machine [ 9s] machine type: i686 [ 9s] [ 1.940953] EXT4-fs (vda): Cannot change data mode on remount [ 9s] mount: / not mounted or bad option [ 9s] In some cases useful info is found in syslog - try [ 9s] dmesg | tail or so [ 9s] swapon /dev/vdb [ 9s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 9s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 9s] *********************************** [ 9s] VM_TYPE: kvm script: /.build/build [ 9s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 9s] mount: none is already mounted or /proc busy [ 9s] mount: none is already mounted or /dev/pts busy [ 9s] logging output to //.build.log... [ 9s] processing specfile /.build-srcdir/dracut.spec ... [ 9s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/dracut.spec build rpmlint-Factory ... [ 9s] running setup postinstall script [ 9s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 9s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 9s] initializing rpm db... [ 9s] [1/120] installing libmagic-data-5.11-1.7 [ 9s] [2/120] installing setup-0.9-1.6 [ 9s] [3/120] installing terminfo-base-5.9-2.1 [ 10s] [4/120] installing filesystem-3.1-3.1 [ 10s] error: Failed to set SMACK64 _ for /proc: Operation not supported [ 10s] [5/120] installing glibc-2.17-1.16 [ 10s] [6/120] installing bash-4.2-2.1 [ 10s] [7/120] installing cpio-2.11-3.3 [ 10s] [8/120] installing diffutils-3.2-1.4 [ 10s] [9/120] installing findutils-4.5.10-1.7 [ 10s] [10/120] installing hostname-3.12-1.3 [ 10s] [11/120] installing libattr-2.4.46-1.7 [ 10s] [12/120] installing libbz2-1.0.6-1.16 [ 10s] [13/120] installing libcap-2.22-1.17 [ 10s] [14/120] installing libcares-1.7.5-1.3 [ 10s] [15/120] installing libelf-0.153-1.12 [ 10s] [16/120] installing libexpat-2.1.0-1.8 [ 10s] [17/120] installing libext2fs-1.42.6-1.3 [ 10s] [18/120] installing libfreebl3-3.13.6-1.35 [ 10s] [19/120] installing libgdbm-1.10-1.3 [ 10s] [20/120] installing libgmp-5.0.5-1.4 [ 11s] [21/120] installing libgpg-error-1.10-1.3 [ 11s] [22/120] installing libltdl-2.4.2-1.2 [ 25s] [23/120] installing liblua-5.1.4-1.6 [ 25s] [24/120] installing liblzma-5.0.3-1.3 [ 25s] [25/120] installing libpcre-8.31-1.3 [ 25s] [26/120] installing libpopt-1.16-1.3 [ 25s] [27/120] installing libpython-2.7.3-1.7 [ 25s] [28/120] installing libsmack-1.0-4.3 [ 25s] [29/120] installing libsqlite-3.7.14-1.3 [ 25s] [30/120] installing libuuid-2.22.2-1.12 [ 25s] [31/120] installing m4-1.4.16-1.3 [ 25s] [32/120] installing net-tools-2.0_20121208git-1.3 [ 25s] [33/120] installing nspr-4.9.2-1.7 [ 25s] [34/120] installing patch-2.7-1.2 [ 25s] [35/120] installing pkg-config-0.28-1.3 [ 25s] [36/120] installing sed-4.2.1-1.3 [ 26s] [37/120] installing tar-1.26-1.3 [ 26s] [38/120] installing update-alternatives-1.16.3-1.2 [ 26s] [39/120] installing which-2.20-4.3 [ 26s] [40/120] installing zlib-1.2.7-1.4 [ 26s] [41/120] installing libncurses-5.9-2.1 [ 26s] [42/120] installing build-compare-2012.01.26-1.12 [ 26s] [43/120] installing dash-0.5.7-4.3 [ 26s] [44/120] installing gawk-4.0.1-1.7 [ 26s] [45/120] installing grep-2.14-1.3 [ 26s] [46/120] installing less-451-5.6 [ 26s] [47/120] installing libacl-2.2.51-2.7 [ 26s] [48/120] installing libasm-0.153-1.12 [ 26s] [49/120] installing libblkid-2.22.2-1.12 [ 26s] [50/120] installing libgcc47-4.7.2-1.26 [ 26s] [51/120] installing libgcrypt-1.5.0-1.3 [ 26s] [52/120] installing libgomp47-4.7.2-1.26 [ 26s] [53/120] installing libidn-1.25-1.7 [ 26s] [54/120] installing libmpfr-3.1.1-1.3 [ 26s] [55/120] installing libopenssl-1.0.1c-1.7 [ 27s] [56/120] installing libreadline-5.2-1.6 [ 27s] [57/120] installing make-3.82-2.1 [ 27s] [58/120] installing nss-certs-3.13.6-1.35 [ 27s] [59/120] installing smack-1.0-4.3 [ 27s] [60/120] installing bzip2-1.0.6-1.16 [ 27s] [61/120] installing libmagic-5.11-1.7 [ 27s] [62/120] installing libxml2-2.8.0-1.3 [ 27s] [63/120] installing xz-5.0.3-1.3 [ 27s] [64/120] installing binutils-2.23.1-1.7 [ 29s] update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode. [ 29s] [65/120] installing libdw-0.153-1.12 [ 29s] [66/120] installing file-5.11-1.7 [ 29s] [67/120] installing libmount-2.22.2-1.12 [ 29s] [68/120] installing libmpc-1.0-1.3 [ 29s] [69/120] installing libstdc++47-4.7.2-1.26 [ 29s] [70/120] installing libxml2-tools-2.8.0-1.3 [ 29s] [71/120] installing rsync-3.0.8-1.3 [ 29s] [72/120] installing libcurl-7.21.3-1.6 [ 30s] [73/120] installing libxslt-1.1.26-1.4 [ 30s] [74/120] installing db4-4.8.30.NC-1.7 [ 30s] [75/120] installing libxslt-tools-1.1.26-1.4 [ 30s] [76/120] installing libgmpxx-5.0.5-1.4 [ 30s] [77/120] installing elfutils-0.153-1.12 [ 36s] [78/120] installing libppl-0.11.2-1.10 [ 37s] [79/120] installing perl-5.16.3-1.14 [ 61s] [80/120] installing python-2.7.3-1.7 [ 62s] [81/120] installing build-mkbaselibs-20120927-1.3 [ 62s] [82/120] installing perl-Error-0.17017-7.3 [ 62s] [83/120] installing autoconf-2.69-1.7 [ 63s] [84/120] installing python-xml-2.7.3-1.7 [ 63s] [85/120] installing libppl_c-0.11.2-1.10 [ 63s] [86/120] installing libcloog-0.15.10-1.7 [ 63s] [87/120] installing build-20120927-1.3 [ 63s] [88/120] installing cpp47-4.7.2-1.26 [ 64s] [89/120] installing cpp-4.7-1.7 [ 64s] [90/120] installing pam-1.1.6-1.4 [ 64s] [91/120] installing nss-3.13.6-1.35 [ 64s] [92/120] installing pwdutils-3.2.19-1.3 [ 64s] [93/120] installing libsoftokn3-3.13.6-1.35 [ 64s] [94/120] installing coreutils-8.21-2.1 [ 64s] [95/120] installing util-linux-2.22.2-1.12 [ 64s] [96/120] installing rpm-4.11.0.1-2.3 [ 65s] [97/120] installing linux-glibc-devel-3.4.0-1.3 [ 67s] [98/120] installing gzip-1.5-1.3 [ 67s] [99/120] installing automake-1.12.1-1.7 [ 67s] [100/120] installing sgml-skel-0.6-1.3 [ 67s] [101/120] installing tzdata-2012e-1.2 [ 68s] [102/120] installing openssh-6.0p1-1.8 [ 68s] [103/120] installing rpmlint-mini-1.4-1.11 [ 68s] [104/120] installing rpm-security-plugin-4.11.0.1-2.3 [ 68s] warning: /etc/device-sec-policy created as /etc/device-sec-policy.rpmnew [ 68s] [105/120] installing rpmlint-tizen-1.0-6.1 [ 68s] [106/120] installing iso_ent-2000.11.03-1.4 [ 68s] [107/120] installing glibc-devel-2.17-1.16 [ 70s] [108/120] installing libtool-2.4.2-1.2 [ 70s] [109/120] installing xmlcharent-0.3-405.3 [ 70s] [110/120] installing git-core-1.8.1.3-1.7 [ 71s] [111/120] installing git-1.8.1.3-1.7 [ 71s] [112/120] installing libstdc++47-devel-4.7.2-1.26 [ 74s] [113/120] installing docbook_4-4.5-1.3 [ 75s] [114/120] installing gcc47-4.7.2-1.26 [ 76s] [115/120] installing gcc-4.7-1.7 [ 76s] [116/120] installing docbook-xsl-stylesheets-1.77.1-1.9 [ 78s] [117/120] installing gcc47-c++-4.7.2-1.26 [ 78s] [118/120] installing gcc-c++-4.7-1.7 [ 78s] [119/120] installing asciidoc-8.6.6-1.3 [ 79s] [120/120] installing rpm-build-4.11.0.1-2.3 [ 79s] removing nis flags from //etc/nsswitch.conf... [ 79s] now finalizing build dir... [ 79s] build target is i686-tizen-linux [ 79s] ----------------------------------------------------------------- [ 79s] I have the following modifications for dracut.spec: [ 79s] 8c8 [ 79s] < Release: 0 [ 79s] --- [ 79s] > Release: 1.9 [ 79s] 226a227 [ 79s] > %changelog [ 79s] ----------------------------------------------------------------- [ 79s] ----- building dracut.spec (user abuild) [ 79s] ----------------------------------------------------------------- [ 79s] ----------------------------------------------------------------- [ 79s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:IVI/standard/4594a2dd6e25c50c7ecc9331778f58c9-dracut' /home/abuild/rpmbuild/SOURCES/dracut.spec [ 79s] Building target platforms: i686-tizen-linux [ 79s] Building for target i686-tizen-linux [ 79s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.slA79B [ 79s] + umask 022 [ 79s] + cd /home/abuild/rpmbuild/BUILD [ 79s] + cd /home/abuild/rpmbuild/BUILD [ 79s] + rm -rf dracut-025 [ 79s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/dracut-025.tar.xz [ 79s] + /bin/tar -xf - [ 79s] + STATUS=0 [ 79s] + '[' 0 -ne 0 ']' [ 79s] + cd dracut-025 [ 79s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 79s] + echo 'Patch #0 (0001-We-do-not-ship-pidof.patch):' [ 79s] Patch #0 (0001-We-do-not-ship-pidof.patch): [ 79s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-We-do-not-ship-pidof.patch [ 79s] + /bin/patch -p1 --fuzz=2 [ 79s] patching file modules.d/99base/module-setup.sh [ 79s] + exit 0 [ 79s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.RbGyWb [ 79s] + umask 022 [ 79s] + cd /home/abuild/rpmbuild/BUILD [ 79s] + cd dracut-025 [ 79s] + LANG=C [ 79s] + export LANG [ 79s] + unset DISPLAY [ 79s] + CFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [ 79s] + export CFLAGS [ 79s] + CXXFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [ 79s] + export CXXFLAGS [ 79s] + FFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -I%_fmoddir' [ 79s] + export FFLAGS [ 79s] + LD_AS_NEEDED=1 [ 79s] + export LD_AS_NEEDED [ 79s] + make all [ 80s] cc -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -std=gnu99 -c -o install/dracut-install.o install/dracut-install.c [ 80s] install/dracut-install.c: In function 'resolve_deps': [ 80s] install/dracut-install.c:259:21: warning: ignoring return value of 'read', declared with attribute warn_unused_result [-Wunused-result] [ 80s] install/dracut-install.c:277:17: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result] [ 80s] install/dracut-install.c: In function 'dracut_install': [ 80s] install/dracut-install.c:404:17: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result] [ 80s] install/dracut-install.c:486:33: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result] [ 80s] install/dracut-install.c: In function 'convert_abs_rel': [ 80s] install/dracut-install.c:100:17: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result] [ 80s] install/dracut-install.c: In function 'hmac_install': [ 80s] install/dracut-install.c:346:25: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result] [ 80s] install/dracut-install.c:347:25: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result] [ 80s] install/dracut-install.c:349:25: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result] [ 80s] install/dracut-install.c:350:25: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result] [ 80s] install/dracut-install.c: In function 'cp': [ 80s] install/dracut-install.c:218:39: warning: ignoring return value of 'fchown', declared with attribute warn_unused_result [-Wunused-result] [ 80s] install/dracut-install.c: In function 'find_binary': [ 80s] install/dracut-install.c:698:25: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result] [ 80s] cc -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -std=gnu99 -c -o install/hashmap.o install/hashmap.c [ 80s] cc -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -std=gnu99 -c -o install/log.o install/log.c [ 80s] cc -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -std=gnu99 -c -o install/util.o install/util.c [ 80s] cc install/dracut-install.o install/hashmap.o install/log.o install/util.o -o install/dracut-install [ 80s] ln -fs install/dracut-install dracut-install [ 80s] asciidoc -d manpage -b docbook -o lsinitrd.1.xml lsinitrd.1.asc [ 81s] xsltproc -o lsinitrd.1 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl lsinitrd.1.xml [ 81s] Note: Writing lsinitrd.1 [ 81s] asciidoc -d manpage -b docbook -o dracut.conf.5.xml dracut.conf.5.asc [ 82s] xsltproc -o dracut.conf.5 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.conf.5.xml [ 82s] Note: Writing dracut.conf.5 [ 82s] asciidoc -d manpage -b docbook -o dracut.cmdline.7.xml dracut.cmdline.7.asc [ 84s] xsltproc -o dracut.cmdline.7 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.cmdline.7.xml [ 87s] Note: Writing dracut.cmdline.7 [ 87s] asciidoc -d manpage -b docbook -o dracut.8.xml dracut.8.asc [ 87s] xsltproc -o dracut.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.8.xml [ 87s] Note: Writing dracut.8 [ 87s] asciidoc -d manpage -b docbook -o dracut-catimages.8.xml dracut-catimages.8.asc [ 87s] xsltproc -o dracut-catimages.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut-catimages.8.xml [ 87s] Note: Writing dracut-catimages.8 [ 87s] asciidoc -d manpage -b docbook -o mkinitrd.8.xml mkinitrd.8.asc [ 87s] xsltproc -o mkinitrd.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl mkinitrd.8.xml [ 87s] Note: Writing mkinitrd.8 [ 87s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-cmdline.service.8.xml modules.d/98systemd/dracut-cmdline.service.8.asc [ 87s] xsltproc -o modules.d/98systemd/dracut-cmdline.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-cmdline.service.8.xml [ 87s] Note: Writing dracut-cmdline.service.8 [ 87s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-initqueue.service.8.xml modules.d/98systemd/dracut-initqueue.service.8.asc [ 87s] xsltproc -o modules.d/98systemd/dracut-initqueue.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-initqueue.service.8.xml [ 88s] Note: Writing dracut-initqueue.service.8 [ 88s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-pivot.service.8.xml modules.d/98systemd/dracut-pre-pivot.service.8.asc [ 88s] xsltproc -o modules.d/98systemd/dracut-pre-pivot.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-pivot.service.8.xml [ 88s] Note: Writing dracut-pre-pivot.service.8 [ 88s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-trigger.service.8.xml modules.d/98systemd/dracut-pre-trigger.service.8.asc [ 88s] xsltproc -o modules.d/98systemd/dracut-pre-trigger.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-trigger.service.8.xml [ 89s] Note: Writing dracut-pre-trigger.service.8 [ 89s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-udev.service.8.xml modules.d/98systemd/dracut-pre-udev.service.8.asc [ 89s] xsltproc -o modules.d/98systemd/dracut-pre-udev.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-udev.service.8.xml [ 89s] Note: Writing dracut-pre-udev.service.8 [ 89s] asciidoc -d manpage -b docbook -o modules.d/98systemd/initrd-switch-root.service.8.xml modules.d/98systemd/initrd-switch-root.service.8.asc [ 90s] xsltproc -o modules.d/98systemd/initrd-switch-root.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/initrd-switch-root.service.8.xml [ 90s] Note: Writing initrd-switch-root.service.8 [ 90s] asciidoc -d manpage -b docbook -o modules.d/98systemd/udevadm-cleanup-db.service.8.xml modules.d/98systemd/udevadm-cleanup-db.service.8.asc [ 90s] xsltproc -o modules.d/98systemd/udevadm-cleanup-db.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/udevadm-cleanup-db.service.8.xml [ 90s] Note: Writing udevadm-cleanup-db.service.8 [ 90s] asciidoc -a numbered -d book -b docbook -o dracut.xml dracut.asc [ 95s] xsltproc -o dracut.html --xinclude -nonet \ [ 95s] --stringparam html.stylesheet \ [ 95s] http://docs.fedoraproject.org/en-US/Common_Content/css/default.css \ [ 95s] http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl dracut.xml [ 95s] rm dracut.xml [ 95s] rm dracut.8.xml dracut.cmdline.7.xml modules.d/98systemd/udevadm-cleanup-db.service.8.xml modules.d/98systemd/dracut-initqueue.service.8.xml modules.d/98systemd/dracut-pre-pivot.service.8.xml mkinitrd.8.xml modules.d/98systemd/dracut-cmdline.service.8.xml dracut.conf.5.xml modules.d/98systemd/dracut-pre-udev.service.8.xml modules.d/98systemd/initrd-switch-root.service.8.xml dracut-catimages.8.xml modules.d/98systemd/dracut-pre-trigger.service.8.xml lsinitrd.1.xml [ 95s] + exit 0 [ 95s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.YlgBHJ [ 95s] + umask 022 [ 95s] + cd /home/abuild/rpmbuild/BUILD [ 95s] + cd dracut-025 [ 95s] + LANG=C [ 95s] + export LANG [ 95s] + unset DISPLAY [ 95s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386 [ 95s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386 [ 95s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386 libdir=/usr/lib bindir=/usr/bin systemdsystemunitdir=/usr/lib/systemd/system sysconfdir=/etc mandir=/usr/share/man [ 95s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/lib/dracut [ 95s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/bin [ 95s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/etc [ 95s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/lib/dracut/modules.d [ 95s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/share/man/man1 /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/share/man/man5 /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/share/man/man7 /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/share/man/man8 [ 95s] install -m 0755 dracut.sh /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/bin/dracut [ 95s] install -m 0755 dracut-catimages.sh /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/bin/dracut-catimages [ 95s] install -m 0755 mkinitrd-dracut.sh /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/bin/mkinitrd [ 95s] install -m 0755 lsinitrd.sh /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/bin/lsinitrd [ 95s] install -m 0644 dracut.conf /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/etc/dracut.conf [ 95s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/etc/dracut.conf.d [ 95s] install -m 0755 dracut-functions.sh /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/lib/dracut/dracut-functions.sh [ 95s] install -m 0755 dracut-version.sh /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/lib/dracut/dracut-version.sh [ 95s] ln -fs dracut-functions.sh /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/lib/dracut/dracut-functions [ 95s] install -m 0755 dracut-logger.sh /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/lib/dracut/dracut-logger.sh [ 95s] install -m 0755 dracut-initramfs-restore.sh /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/lib/dracut/dracut-initramfs-restore [ 95s] cp -arx modules.d /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/lib/dracut [ 95s] for i in lsinitrd.1; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/share/man/man1/${i##*/}; done [ 95s] for i in dracut.conf.5; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/share/man/man5/${i##*/}; done [ 95s] for i in dracut.cmdline.7; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/share/man/man7/${i##*/}; done [ 95s] for i in dracut.8 dracut-catimages.8 mkinitrd.8 modules.d/98systemd/dracut-cmdline.service.8 modules.d/98systemd/dracut-initqueue.service.8 modules.d/98systemd/dracut-pre-pivot.service.8 modules.d/98systemd/dracut-pre-trigger.service.8 modules.d/98systemd/dracut-pre-udev.service.8 modules.d/98systemd/initrd-switch-root.service.8 modules.d/98systemd/udevadm-cleanup-db.service.8; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/share/man/man8/${i##*/}; done [ 95s] ln -fs dracut.cmdline.7 /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/share/man/man7/dracut.kernel.7 [ 95s] if [ -n "/usr/lib/systemd/system" ]; then \ [ 95s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/lib/systemd/system; \ [ 95s] install -m 0644 dracut-shutdown.service /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/lib/systemd/system; \ [ 95s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/lib/systemd/system/shutdown.target.wants; \ [ 95s] ln -s ../dracut-shutdown.service \ [ 95s] /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/lib/systemd/system/shutdown.target.wants/dracut-shutdown.service; \ [ 95s] fi [ 95s] if [ -f install/dracut-install ]; then \ [ 95s] install -m 0755 install/dracut-install /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/lib/dracut/dracut-install; \ [ 95s] fi [ 95s] + echo DRACUT_VERSION=025-1.9 [ 95s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386//usr/lib/dracut/modules.d/01fips [ 95s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386//usr/lib/dracut/modules.d/02fips-aesni [ 95s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386//usr/lib/dracut/modules.d/50gensplash [ 95s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386//usr/lib/dracut/modules.d/96securityfs [ 95s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386//usr/lib/dracut/modules.d/97masterkey [ 95s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386//usr/lib/dracut/modules.d/98integrity [ 95s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386//usr/lib/dracut/modules.d/98selinux [ 95s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/boot/dracut [ 95s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/var/lib/dracut/overlay [ 95s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/var/log [ 95s] + touch /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/var/log/dracut.log [ 95s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/com/initramfs [ 95s] + install -m 0644 dracut.conf.d/suse.conf.example /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/etc/dracut.conf.d/01-dist.conf [ 95s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/etc/logrotate.d [ 95s] + install -m 0644 dracut.logrotate /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/etc/logrotate.d/dracut_log [ 95s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/dracut-025 [ 95s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/lib/dracut/dracut-install [ 96s] cpio: glibc-2.17/csu: Cannot stat: No such file or directory [ 96s] cpio: glibc-2.17/csu/elf-init.c: Cannot stat: No such file or directory [ 96s] cpio: glibc-2.17/csu/init.c: Cannot stat: No such file or directory [ 96s] cpio: glibc-2.17/sysdeps/i386/crti.S: Cannot stat: No such file or directory [ 96s] cpio: glibc-2.17/sysdeps/i386/crtn.S: Cannot stat: No such file or directory [ 96s] cpio: glibc-2.17/sysdeps/i386/start.S: Cannot stat: No such file or directory [ 96s] 171 blocks [ 96s] + /usr/lib/rpm/brp-compress [ 96s] + /usr/lib/rpm/brp-tizen [ 96s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386 [ 96s] Processing files: dracut-025-1.9.i686 [ 96s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.PAz8tk [ 96s] + umask 022 [ 96s] + cd /home/abuild/rpmbuild/BUILD [ 96s] + cd dracut-025 [ 96s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/share/licenses/dracut [ 96s] + export LICENSEDIR [ 96s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/share/licenses/dracut [ 96s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386/usr/share/licenses/dracut [ 96s] + exit 0 [ 96s] Provides: config(dracut) = 025-1.9 dracut = 025-1.9 dracut(x86-32) = 025-1.9 [ 96s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 96s] Requires: /bin/bash /bin/sh libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libc.so.6(GLIBC_2.8) [ 96s] Conflicts: systemd < 187 [ 96s] Processing files: dracut-debugsource-025-1.9.i686 [ 96s] Provides: dracut-debugsource = 025-1.9 dracut-debugsource(x86-32) = 025-1.9 [ 96s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 96s] Processing files: dracut-network-025-1.9.i686 [ 96s] Provides: dracut-network = 025-1.9 dracut-network(x86-32) = 025-1.9 [ 96s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 96s] Requires: /bin/bash /bin/sh [ 96s] Processing files: dracut-caps-025-1.9.i686 [ 96s] Provides: dracut-caps = 025-1.9 dracut-caps(x86-32) = 025-1.9 [ 96s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 96s] Requires: /bin/bash [ 96s] Processing files: dracut-tools-025-1.9.i686 [ 96s] Provides: dracut-tools = 025-1.9 dracut-tools(x86-32) = 025-1.9 [ 96s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 96s] Requires: /bin/bash [ 96s] Processing files: dracut-debuginfo-025-1.9.i686 [ 96s] Provides: debuginfo(build-id) = a2bf3164c32d564e1d5fff931909038f0f32a3bb [ 96s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 96s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386 [ 96s] Wrote: /home/abuild/rpmbuild/SRPMS/dracut-025-1.9.src.rpm [ 97s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-025-1.9.i686.rpm [ 97s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-debugsource-025-1.9.i686.rpm [ 97s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-network-025-1.9.i686.rpm [ 97s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-caps-025-1.9.i686.rpm [ 97s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-tools-025-1.9.i686.rpm [ 97s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-debuginfo-025-1.9.i686.rpm [ 97s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.TsGhor [ 97s] + umask 022 [ 97s] + cd /home/abuild/rpmbuild/BUILD [ 97s] + cd dracut-025 [ 97s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/dracut-025-1.9.i386 [ 97s] + exit 0 [ 97s] ... checking for files with abuild user/group [ 97s] [ 97s] RPMLINT report: [ 97s] =============== [ 98s] dracut.i686: W: unstripped-binary-or-object /usr/lib/dracut/dracut-install [ 98s] stripping debug info from binaries happens automatically according to global [ 98s] project settings. So there's normally no need to manually strip binaries. Left [ 98s] over unstripped binaries could therefore indicate a bug in the automatic [ 98s] stripping process. [ 98s] [ 98s] dracut.i686: W: tizen-filelist-forbidden-fhs23 /usr/com is not allowed in FHS 2.3 [ 98s] see http://www.pathname.com/fhs/ to find a better location [ 98s] [ 98s] dracut.i686: W: script-without-shebang /usr/lib/dracut/dracut-version.sh [ 98s] This text file has executable bits set or is located in a path dedicated for [ 98s] executables, but lacks a shebang and cannot thus be executed. If the file is [ 98s] meant to be an executable script, add the shebang, otherwise remove the [ 98s] executable bits or move the file elsewhere. [ 98s] [ 98s] dracut-network.i686: W: non-executable-script /usr/lib/dracut/modules.d/40network/net-lib.sh 0644L /bin/sh [ 98s] dracut-network.i686: W: non-executable-script /usr/lib/dracut/modules.d/40network/parse-vlan.sh 0644L /bin/sh [ 98s] dracut.i686: W: non-executable-script /usr/lib/dracut/modules.d/98pollcdrom/pollcdrom.sh 0644L /bin/sh [ 98s] dracut.i686: W: non-executable-script /usr/lib/dracut/modules.d/91crypt-loop/crypt-loop-lib.sh 0644L /bin/sh [ 98s] dracut.i686: W: non-executable-script /usr/lib/dracut/modules.d/50drm/module-setup.sh 0644L /bin/bash [ 98s] dracut.i686: W: non-executable-script /usr/lib/dracut/modules.d/99base/wait-host-devs.sh 0644L /bin/sh [ 98s] dracut.i686: W: non-executable-script /usr/lib/dracut/modules.d/95udev-rules/udev-rules-prepare.sh 0644L /bin/sh [ 98s] This text file contains a shebang or is located in a path dedicated for [ 98s] executables, but lacks the executable bits and cannot thus be executed. If [ 98s] the file is meant to be an executable script, add the executable bits, [ 98s] otherwise remove the shebang or move the file elsewhere. [ 98s] [ 98s] dracut.i686: W: missing-dependency-to-logrotate for logrotate script /etc/logrotate.d/dracut_log [ 98s] This package installs a file in /etc/logrotate.d/ but doesn't require [ 98s] logrotate to be installed. Because logrotate is not part of the essential [ 98s] packages, your package should explicitely depend on logrotate to make sure [ 98s] that your logrotate job is executed. If it is an optional feature of your [ 98s] package, recommend or suggest logrotate. [ 98s] [ 98s] dracut.i686: W: incoherent-logrotate-file /etc/logrotate.d/dracut_log [ 98s] Your logrotate file should be named /etc/logrotate.d/. [ 98s] [ 98s] dracut.i686: W: ghost-files-without-postin [ 98s] dracut-caps.i686: W: explicit-lib-dependency libcap [ 98s] You must let rpm find the library dependencies by itself. Do not put unneeded [ 98s] explicit Requires: tags. [ 98s] [ 98s] 5 packages and 0 specfiles checked; 0 errors, 14 warnings. [ 98s] [ 98s] ... creating baselibs [ 98s] ... comparing built packages with the former built [ 98s] /usr/lib/build/rpm-check.sh [ 98s] compare /.build.oldpackages/dracut-025-1.8.src.rpm /home/abuild/rpmbuild/SRPMS/dracut-025-1.9.src.rpm [ 98s] --- /tmp/tmp.o7SbDbXvRx 2013-06-27 20:32:30.234480283 +0000 [ 98s] +++ /tmp/tmp.SFLyHl7ofQ 2013-06-27 20:32:30.246480283 +0000 [ 98s] @@ -5,7 +5,7 @@ [ 98s] into the initramfs. Dracut contains various modules which are driven by the [ 98s] event-based udev. Having root on MD, DM, LVM2, LUKS is supported as well as [ 98s] NFS, iSCSI, NBD, FCoE with the dracut-network package. [ 98s] - tizen Tizen obs://build.tizen.org/Tizen/standard/4594a2dd6e25c50c7ecc9331778f58c9-dracut GPL-2.0+ and LGPL-2.1+ GPL-2.0+ and LGPL-2.1+ [ 98s] + tizen Tizen:IVI obs://build.tizen.org/Tizen:IVI/standard/4594a2dd6e25c50c7ecc9331778f58c9-dracut GPL-2.0+ and LGPL-2.1+ GPL-2.0+ and LGPL-2.1+ [ 98s] Base/Startup https://dracut.wiki.kernel.org/ (none) (none) (none) [ 98s] (none) 4.11.0.1 (none) [ 98s] cpio gzip 9 [ 98s] RPM meta information is different [ 98s] ... saving built packages [ 98s] /home/abuild/rpmbuild/RPMS/i686/dracut-025-1.9.i686.rpm [ 98s] /home/abuild/rpmbuild/RPMS/i686/dracut-caps-025-1.9.i686.rpm [ 98s] /home/abuild/rpmbuild/RPMS/i686/dracut-debuginfo-025-1.9.i686.rpm [ 98s] /home/abuild/rpmbuild/RPMS/i686/dracut-debugsource-025-1.9.i686.rpm [ 98s] /home/abuild/rpmbuild/RPMS/i686/dracut-network-025-1.9.i686.rpm [ 98s] /home/abuild/rpmbuild/RPMS/i686/dracut-tools-025-1.9.i686.rpm [ 98s] /home/abuild/rpmbuild/SRPMS/dracut-025-1.9.src.rpm [ 98s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 98s] [ 98s] w14 finished "build dracut.spec" at Thu Jun 27 20:32:30 UTC 2013. [ 98s] [ 101s] [ 93.723467] SysRq : Power Off [ 102s] [ 95.281642] Power down. [ 103s] build: extracting built packages... [ 103s] dracut-025-1.9.i686.rpm [ 103s] dracut-caps-025-1.9.i686.rpm [ 103s] dracut-debuginfo-025-1.9.i686.rpm [ 103s] dracut-debugsource-025-1.9.i686.rpm [ 103s] dracut-network-025-1.9.i686.rpm [ 103s] dracut-tools-025-1.9.i686.rpm [ 103s] dracut-025-1.9.src.rpm [ 103s] rpmlint.log