[ 0s] Using BUILD_ROOT=/srv/build/root_2/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_2/root [ 0s] [ 0s] [ 0s] w02 started "build perl-Test-Pod-Coverage.spec" at Thu May 30 20:51:35 UTC 2013. [ 0s] [ 0s] Building perl-Test-Pod-Coverage for project 'Tizen' repository 'standard' arch 'i586' srcmd5 '21416e85ece3eecdb7c6deb59033b1bd' [ 0s] [ 0s] processing specfile /srv/build/root_2/.build-srcdir/perl-Test-Pod-Coverage.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_2/.build-srcdir/perl-Test-Pod-Coverage.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_2/.build.rpmlist /srv/build/root_2/.build-srcdir/perl-Test-Pod-Coverage.spec build rpmlint-Factory ... [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/34] preinstalling libmagic-data... [ 0s] [2/34] preinstalling setup... [ 0s] [3/34] preinstalling filesystem... [ 0s] [4/34] preinstalling glibc... [ 0s] [5/34] preinstalling bash... [ 0s] [6/34] preinstalling diffutils... [ 0s] [7/34] preinstalling grep... [ 0s] [8/34] preinstalling libattr... [ 0s] [9/34] preinstalling libbz2... [ 0s] [10/34] preinstalling libcap... [ 1s] [11/34] preinstalling libelf... [ 1s] [12/34] preinstalling libfreebl3... [ 1s] [13/34] preinstalling liblua... [ 1s] [14/34] preinstalling liblzma... [ 1s] [15/34] preinstalling libncurses... [ 1s] [16/34] preinstalling libpopt... [ 1s] [17/34] preinstalling libsmack... [ 1s] [18/34] preinstalling libsqlite... [ 1s] [19/34] preinstalling nspr... [ 1s] [20/34] preinstalling sed... [ 1s] [21/34] preinstalling tar... [ 1s] [22/34] preinstalling zlib... [ 1s] [23/34] preinstalling libacl... [ 1s] [24/34] preinstalling libgcc47... [ 1s] [25/34] preinstalling libreadline... [ 1s] [26/34] preinstalling smack... [ 1s] [27/34] preinstalling bzip2... [ 1s] [28/34] preinstalling libmagic... [ 1s] [29/34] preinstalling libxml2... [ 1s] [30/34] preinstalling coreutils... [ 1s] [31/34] preinstalling nss... [ 1s] [32/34] preinstalling libsoftokn3... [ 1s] [33/34] preinstalling rpm... [ 1s] [34/34] preinstalling rpm-security-plugin... [ 1s] [ 2s] [1/8] preinstalling libext2fs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling perl... [ 2s] [5/8] preinstalling grep... [ 2s] [6/8] preinstalling libblkid... [ 2s] [7/8] preinstalling libmount... [ 2s] [8/8] preinstalling util-linux... [ 2s] copying packages... [ 3s] reordering...cycle: nss -> libsoftokn3 [ 3s] breaking dependency nss -> libsoftokn3 [ 3s] cycle: coreutils -> pam [ 3s] breaking dependency pam -> coreutils [ 3s] done [ 3s] booting kvm ... [ 3s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -net none -cpu host -kernel /srv/kernel/vmlinuz -initrd /srv/kernel/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm -m 8192 -drive file=/srv/build/root_2/root,if=virtio,cache=unsafe -drive file=/srv/build/root_2/root,if=ide,index=0,cache=unsafe -drive file=/srv/build/root_2/swap,if=virtio,cache=unsafe -smp 4 [ 4s]  [ 4s] Google, Inc. [ 4s] Serial Graphics Adapter 09/05/12 [ 4s] SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (abuild@build24) Wed Sep 5 14:01:11 UTC 2012 [ 4s] 4 0 [ 4s]  SeaBIOS (version 1.6.3-20120905_140109) [ 4s] [ 4s] Booting from ROM... [ 7s] doing fast boot [ 7s] Creating device nodes with udev [ 7s] udevd[205]: failed to execute '/etc/sysconfig/network/scripts/ifup-sysctl' '/etc/sysconfig/network/scripts/ifup-sysctl lo -o hotplug': No such file or directory [ 7s] [ 8s] Waiting for device /dev/vda to appear: ok [ 8s] fsck from util-linux 2.20.1 [ 8s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 8s] /dev/vda: clean, 5115/2097152 files, 178440/8388608 blocks [ 8s] fsck succeeded. Mounting root device read-write. [ 8s] Mounting root /dev/vda [ 8s] mount -o rw,noatime,acl,user_xattr -t ext4 /dev/vda /root [ 8s] replacing /etc/mtab with symlink to /proc/self/mounts [ 8s] sh: /sbin/modprobe: No such file or directory [ 8s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 8s] /.build/qemu-reg: line 8: interpreter '/usr/bin/qemu-arm-binfmt' not found, ignoring [ 8s] /.build/qemu-reg: line 9: interpreter '/usr/bin/qemu-armeb-binfmt' not found, ignoring [ 8s] /.build/qemu-reg: line 10: interpreter '/usr/bin/qemu-ppc-binfmt' not found, ignoring [ 8s] /.build/qemu-reg: line 11: interpreter '/usr/bin/qemu-mips-binfmt' not found, ignoring [ 8s] /.build/qemu-reg: line 12: interpreter '/usr/bin/qemu-mipsel-binfmt' not found, ignoring [ 8s] /.build/qemu-reg: line 18: interpreter '/usr/bin/qemu-sh4-binfmt' not found, ignoring [ 8s] /.build/qemu-reg: line 19: interpreter '/usr/bin/qemu-sh4eb-binfmt' not found, ignoring [ 8s] 2nd stage started in virtual machine [ 8s] machine type: x86_64 [ 8s] switching personality to 8... [ 8s] 2nd stage started in virtual machine [ 8s] machine type: i686 [ 8s] [ 1.966133] EXT4-fs (vda): Cannot change data mode on remount [ 8s] mount: / not mounted or bad option [ 8s] In some cases useful info is found in syslog - try [ 8s] dmesg | tail or so [ 8s] swapon /dev/vdb [ 8s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 8s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 8s] *********************************** [ 8s] VM_TYPE: kvm script: /.build/build [ 8s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 8s] mount: none is already mounted or /proc busy [ 8s] mount: none is already mounted or /dev/pts busy [ 8s] logging output to //.build.log... [ 8s] processing specfile /.build-srcdir/perl-Test-Pod-Coverage.spec ... [ 8s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/perl-Test-Pod-Coverage.spec build rpmlint-Factory ... [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 8s] [1/97] installing libmagic-data-5.11-1.3 [ 8s] [2/97] installing setup-0.9-1.3 [ 8s] [3/97] installing terminfo-base-5.9-1.3 [ 8s] [4/97] installing filesystem-3.1-2.1 [ 8s] error: Failed to set SMACK64 _ for /proc: Operation not supported [ 8s] [5/97] installing glibc-2.17-1.10 [ 8s] [6/97] installing bash-4.2-1.3 [ 9s] [7/97] installing cpio-2.11-3.3 [ 9s] [8/97] installing diffutils-3.2-1.4 [ 9s] [9/97] installing findutils-4.5.10-1.3 [ 9s] [10/97] installing hostname-3.12-1.3 [ 9s] [11/97] installing libattr-2.4.46-1.3 [ 9s] [12/97] installing libbz2-1.0.6-1.10 [ 9s] [13/97] installing libcap-2.22-1.10 [ 9s] [14/97] installing libelf-0.153-1.5 [ 9s] [15/97] installing libext2fs-1.42.6-1.3 [ 9s] [16/97] installing libfreebl3-3.13.6-1.28 [ 9s] [17/97] installing libgdbm-1.10-1.3 [ 9s] [18/97] installing libgmp-5.0.5-1.4 [ 9s] [19/97] installing libltdl-2.4.2-1.2 [ 9s] [20/97] installing liblua-5.1.4-1.3 [ 9s] [21/97] installing liblzma-5.0.3-1.3 [ 9s] [22/97] installing libpcre-8.31-1.3 [ 9s] [23/97] installing libpopt-1.16-1.3 [ 9s] [24/97] installing libsmack-1.0-4.3 [ 9s] [25/97] installing libsqlite-3.7.14-1.3 [ 9s] [26/97] installing libuuid-2.22.2-1.7 [ 9s] [27/97] installing m4-1.4.16-1.3 [ 9s] [28/97] installing net-tools-2.0_20121208git-1.3 [ 10s] [29/97] installing nspr-4.9.2-1.3 [ 10s] [30/97] installing patch-2.7-1.2 [ 10s] [31/97] installing pkg-config-0.28-1.3 [ 10s] [32/97] installing sed-4.2.1-1.3 [ 10s] [33/97] installing tar-1.26-1.2 [ 10s] [34/97] installing update-alternatives-1.16.3-1.2 [ 10s] [35/97] installing which-2.20-4.3 [ 10s] [36/97] installing zlib-1.2.7-1.4 [ 10s] [37/97] installing libncurses-5.9-1.3 [ 10s] [38/97] installing build-compare-2012.01.26-1.6 [ 10s] [39/97] installing gawk-4.0.1-1.2 [ 10s] [40/97] installing grep-2.14-1.3 [ 10s] [41/97] installing less-451-5.3 [ 10s] [42/97] installing libacl-2.2.51-2.3 [ 10s] [43/97] installing libasm-0.153-1.5 [ 10s] [44/97] installing libblkid-2.22.2-1.7 [ 10s] [45/97] installing libgcc47-4.7.2-1.16 [ 10s] [46/97] installing libgomp47-4.7.2-1.16 [ 10s] [47/97] installing libmpfr-3.1.1-1.3 [ 10s] [48/97] installing libreadline-5.2-1.6 [ 11s] [49/97] installing make-3.82-2.1 [ 11s] [50/97] installing nss-certs-3.13.6-1.28 [ 11s] [51/97] installing smack-1.0-4.3 [ 11s] [52/97] installing bzip2-1.0.6-1.10 [ 11s] [53/97] installing libmagic-5.11-1.3 [ 11s] [54/97] installing libxml2-2.8.0-1.3 [ 11s] [55/97] installing xz-5.0.3-1.3 [ 11s] [56/97] installing binutils-2.23.1-1.3 [ 13s] update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode. [ 13s] [57/97] installing libdw-0.153-1.5 [ 13s] [58/97] installing file-5.11-1.3 [ 13s] [59/97] installing libmount-2.22.2-1.7 [ 13s] [60/97] installing libmpc-1.0-1.3 [ 13s] [61/97] installing libstdc++47-4.7.2-1.16 [ 13s] [62/97] installing db4-4.8.30.NC-1.3 [ 13s] [63/97] installing libgmpxx-5.0.5-1.4 [ 13s] [64/97] installing elfutils-0.153-1.5 [ 13s] [65/97] installing libppl-0.11.2-1.8 [ 13s] [66/97] installing perl-5.16.3-1.9 [ 26s] [67/97] installing build-mkbaselibs-20120927-1.3 [ 26s] [68/97] installing perl-Devel-Symdump-2.08-11.3 [ 26s] [69/97] installing perl-Test-Pod-1.45-1.3 [ 26s] [70/97] installing autoconf-2.69-1.3 [ 27s] [71/97] installing libppl_c-0.11.2-1.8 [ 28s] [72/97] installing perl-Pod-Coverage-0.22-1.3 [ 28s] [73/97] installing libcloog-0.15.10-1.3 [ 28s] [74/97] installing build-20120927-1.3 [ 28s] [75/97] installing cpp47-4.7.2-1.16 [ 28s] [76/97] installing cpp-4.7-1.3 [ 28s] [77/97] installing pam-1.1.6-1.4 [ 28s] [78/97] installing nss-3.13.6-1.28 [ 28s] [79/97] installing libsoftokn3-3.13.6-1.28 [ 28s] [80/97] installing coreutils-8.21-1.2 [ 28s] [81/97] installing util-linux-2.22.2-1.7 [ 28s] [82/97] installing rpm-4.11.0.1-1.3 [ 29s] [83/97] installing linux-glibc-devel-3.4.0-1.3 [ 30s] [84/97] installing gzip-1.5-1.3 [ 31s] [85/97] installing automake-1.12.1-1.3 [ 31s] [86/97] installing tzdata-2012e-1.2 [ 31s] [87/97] installing rpmlint-mini-1.4-1.4 [ 32s] [88/97] installing rpm-security-plugin-4.11.0.1-1.3 [ 32s] warning: /etc/device-sec-policy created as /etc/device-sec-policy.rpmnew [ 32s] [89/97] installing rpmlint-tizen-1.0-4.2 [ 32s] [90/97] installing glibc-devel-2.17-1.10 [ 33s] [91/97] installing libtool-2.4.2-1.2 [ 33s] [92/97] installing libstdc++47-devel-4.7.2-1.16 [ 35s] [93/97] installing gcc47-4.7.2-1.16 [ 36s] [94/97] installing gcc-4.7-1.3 [ 36s] [95/97] installing gcc47-c++-4.7.2-1.16 [ 37s] [96/97] installing gcc-c++-4.7-1.3 [ 37s] [97/97] installing rpm-build-4.11.0.1-1.3 [ 37s] removing nis flags from //etc/nsswitch.conf... [ 37s] now finalizing build dir... [ 37s] build target is i686-tizen-linux [ 37s] ----------------------------------------------------------------- [ 37s] I have the following modifications for perl-Test-Pod-Coverage.spec: [ 37s] 21c21 [ 37s] < Release: 0 [ 37s] --- [ 37s] > Release: 1.3 [ 37s] ----------------------------------------------------------------- [ 37s] ----- building perl-Test-Pod-Coverage.spec (user abuild) [ 37s] ----------------------------------------------------------------- [ 37s] ----------------------------------------------------------------- [ 37s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen/standard/21416e85ece3eecdb7c6deb59033b1bd-perl-Test-Pod-Coverage' /home/abuild/rpmbuild/SOURCES/perl-Test-Pod-Coverage.spec [ 37s] Building target platforms: i686-tizen-linux [ 37s] Building for target i686-tizen-linux [ 37s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Zugpis [ 37s] + umask 022 [ 37s] + cd /home/abuild/rpmbuild/BUILD [ 37s] + cd /home/abuild/rpmbuild/BUILD [ 37s] + rm -rf Test-Pod-Coverage-1.08 [ 37s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/Test-Pod-Coverage-1.08.tar.gz [ 37s] + /bin/tar -xf - [ 37s] + STATUS=0 [ 37s] + '[' 0 -ne 0 ']' [ 37s] + cd Test-Pod-Coverage-1.08 [ 37s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 37s] + exit 0 [ 37s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.HFHbBx [ 37s] + umask 022 [ 37s] + cd /home/abuild/rpmbuild/BUILD [ 37s] + cd Test-Pod-Coverage-1.08 [ 37s] + LANG=C [ 37s] + export LANG [ 37s] + unset DISPLAY [ 37s] + CFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [ 37s] + export CFLAGS [ 37s] + CXXFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [ 37s] + export CXXFLAGS [ 37s] + FFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -I%_fmoddir' [ 37s] + export FFLAGS [ 37s] + LD_AS_NEEDED=1 [ 37s] + export LD_AS_NEEDED [ 37s] + perl Makefile.PL INSTALLDIRS=vendor [ 38s] Checking if your kit is complete... [ 38s] Looks good [ 38s] Writing Makefile for Test::Pod::Coverage [ 38s] Writing MYMETA.yml and MYMETA.json [ 38s] + make -j4 [ 38s] cp Coverage.pm blib/lib/Test/Pod/Coverage.pm [ 38s] Manifying blib/man3/Test::Pod::Coverage.3pm [ 38s] + exit 0 [ 38s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.N08uUD [ 38s] + umask 022 [ 38s] + cd /home/abuild/rpmbuild/BUILD [ 38s] + cd Test-Pod-Coverage-1.08 [ 38s] + LANG=C [ 38s] + export LANG [ 38s] + unset DISPLAY [ 38s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386 [ 38s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386 [ 38s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386 install_vendor [ 38s] Manifying blib/man3/Test::Pod::Coverage.3pm [ 38s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386/usr/lib/perl5/vendor_perl/5.16.3/Test/Pod/Coverage.pm [ 38s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386/usr/share/man/man3/Test::Pod::Coverage.3pm [ 38s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386/usr/lib/perl5/5.16.3/i586-linux-thread-multi/perllocal.pod [ 38s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386/usr/lib/perl5/vendor_perl/5.16.3/i586-linux-thread-multi [ 38s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386/usr/lib/perl5/5.16.3/i586-linux-thread-multi [ 38s] + FILES=perl-Test-Pod-Coverage.files [ 38s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386/usr/lib/perl5/vendor_perl/5.16.3 -maxdepth 1 -type f [ 38s] + RES= [ 38s] + '[' -n '' ']' [ 38s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386/usr/lib/perl5/vendor_perl/5.16.3/ [ 38s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386/usr/lib/perl5/vendor_perl/5.16.3/ -type d [ 38s] ++ sort [ 38s] + for dir in '`find ${base_dir} -type d | sort`' [ 38s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386/usr/lib/perl5/vendor_perl/5.16.3/ = /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386/usr/lib/perl5/vendor_perl/5.16.3/ ']' [ 38s] + continue [ 38s] + for dir in '`find ${base_dir} -type d | sort`' [ 38s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386/usr/lib/perl5/vendor_perl/5.16.3/Test = /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386/usr/lib/perl5/vendor_perl/5.16.3/ ']' [ 38s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386/usr/lib/perl5/vendor_perl/5.16.3/ '{print $2}' [ 38s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386/usr/lib/perl5/vendor_perl/5.16.3/Test [ 38s] + el=Test [ 38s] + all_dir=(${all_dir[@]} $el) [ 38s] + for dir in '`find ${base_dir} -type d | sort`' [ 38s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386/usr/lib/perl5/vendor_perl/5.16.3/Test/Pod = /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386/usr/lib/perl5/vendor_perl/5.16.3/ ']' [ 38s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386/usr/lib/perl5/vendor_perl/5.16.3/ '{print $2}' [ 38s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386/usr/lib/perl5/vendor_perl/5.16.3/Test/Pod [ 38s] + el=Test/Pod [ 38s] + all_dir=(${all_dir[@]} $el) [ 38s] + for i in '${all_dir[@]}' [ 38s] + '[' Test = auto ']' [ 38s] + '[' /usr/lib/perl5/vendor_perl/5.16.3/Test = /usr/lib/perl5/vendor_perl/5.16.3/i586-linux-thread-multi/auto ']' [ 38s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386/usr/lib/perl5/vendor_perl/5.16.3//Test ']' [ 38s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386/usr/lib/perl5/vendor_perl/5.16.3//Test -maxdepth 1 -type f [ 38s] + RES= [ 38s] + '[' -n '' ']' [ 38s] + fgen_dir /usr/lib/perl5/vendor_perl/5.16.3/Test [ 38s] + /bin/cat [ 38s] + for i in '${all_dir[@]}' [ 38s] + '[' Test/Pod = auto ']' [ 38s] + '[' /usr/lib/perl5/vendor_perl/5.16.3/Test/Pod = /usr/lib/perl5/vendor_perl/5.16.3/i586-linux-thread-multi/auto ']' [ 38s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386/usr/lib/perl5/vendor_perl/5.16.3//Test/Pod ']' [ 38s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386/usr/lib/perl5/vendor_perl/5.16.3//Test/Pod -maxdepth 1 -type f [ 38s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386/usr/lib/perl5/vendor_perl/5.16.3//Test/Pod/Coverage.pm [ 38s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386/usr/lib/perl5/vendor_perl/5.16.3//Test/Pod/Coverage.pm ']' [ 38s] + fgen_dir /usr/lib/perl5/vendor_perl/5.16.3/Test/Pod [ 38s] + /bin/cat [ 38s] + for file in '$RES' [ 38s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386/usr/lib/perl5/vendor_perl/5.16.3//Test/Pod/Coverage.pm [ 38s] + fgen_file /usr/lib/perl5/vendor_perl/5.16.3/Test/Pod/Coverage.pm [ 38s] + /bin/cat [ 38s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386/usr/share/man ']' [ 38s] + fgen_file '/usr/share/man/man?/*' [ 38s] + /bin/cat [ 38s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386/var/adm/perl-modules/perl-Test-Pod-Coverage ']' [ 38s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386/usr/bin ']' [ 38s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/Test-Pod-Coverage-1.08 [ 38s] + /usr/lib/rpm/brp-compress [ 38s] + /usr/lib/rpm/brp-tizen [ 38s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386 [ 38s] Processing files: perl-Test-Pod-Coverage-1.08-1.3.noarch [ 38s] Provides: perl(Test::Pod::Coverage) = 1.08 perl-Test-Pod-Coverage = 1.08-1.3 [ 38s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 38s] Processing files: perl-Test-Pod-Coverage-debugsource-1.08-1.3.noarch [ 38s] Provides: perl-Test-Pod-Coverage-debugsource = 1.08-1.3 [ 38s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 38s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386 [ 38s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-Test-Pod-Coverage-1.08-1.3.src.rpm [ 38s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/perl-Test-Pod-Coverage-1.08-1.3.noarch.rpm [ 38s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/perl-Test-Pod-Coverage-debugsource-1.08-1.3.noarch.rpm [ 38s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.fLyg25 [ 38s] + umask 022 [ 38s] + cd /home/abuild/rpmbuild/BUILD [ 38s] + cd Test-Pod-Coverage-1.08 [ 38s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-1.3.i386 [ 38s] + exit 0 [ 38s] ... checking for files with abuild user/group [ 38s] [ 38s] RPMLINT report: [ 38s] =============== [ 38s] perl-Test-Pod-Coverage.noarch: W: non-standard-group Development/Libraries/Perl [ 38s] perl-Test-Pod-Coverage.src: W: non-standard-group Development/Libraries/Perl [ 38s] The value of the Group tag in the package is not valid. Valid groups are [ 38s] listed here: https://wiki.tizen.org/wiki/Packaging/Guidelines#Group_Tag [ 38s] [ 38s] perl-Test-Pod-Coverage.noarch: W: no-dependency-on perl-base 5.16.3 [ 38s] perl-Test-Pod-Coverage.noarch: W: description-shorter-than-summary [ 38s] perl-Test-Pod-Coverage.src: W: description-shorter-than-summary [ 38s] The package description should be longer than the summary. be a bit more [ 38s] verbose, please. [ 38s] [ 38s] 2 packages and 0 specfiles checked; 0 errors, 5 warnings. [ 38s] [ 38s] ... creating baselibs [ 39s] ... comparing built packages with the former built [ 39s] /usr/lib/build/rpm-check.sh [ 39s] compare /.build.oldpackages/perl-Test-Pod-Coverage-1.08-1.2.src.rpm /home/abuild/rpmbuild/SRPMS/perl-Test-Pod-Coverage-1.08-1.3.src.rpm [ 39s] compare /.build.oldpackages/perl-Test-Pod-Coverage-1.08-1.2.noarch.rpm /home/abuild/rpmbuild/RPMS/noarch/perl-Test-Pod-Coverage-1.08-1.3.noarch.rpm [ 39s] compare /.build.oldpackages/perl-Test-Pod-Coverage-debugsource-1.08-1.2.noarch.rpm /home/abuild/rpmbuild/RPMS/noarch/perl-Test-Pod-Coverage-debugsource-1.08-1.3.noarch.rpm [ 39s] comparing /.build.oldpackages/rpmlint.log and /home/abuild/rpmbuild/OTHER/rpmlint.log [ 39s] rpmlint.log files differ: [ 39s] --- /.build.oldpackages/rpmlint.log 2013-05-30 20:51:38.323365788 +0000 [ 39s] +++ /home/abuild/rpmbuild/OTHER/rpmlint.log 2013-05-30 20:52:12.204928707 +0000 [ 39s] @@ -1,41 +1,7 @@ [ 39s] perl-Test-Pod-Coverage.noarch: W: non-standard-group Development/Libraries/Perl [ 39s] perl-Test-Pod-Coverage.src: W: non-standard-group Development/Libraries/Perl [ 39s] -The value of the Group tag in the package is not valid. Valid groups are: [ 39s] -"System/Base", "System/GUI/GNOME", "System/GUI/Other", "System/Kernel", [ 39s] -"System/Network", "System/Libraries", "System/Localization", [ 39s] -"System/Management", "System/Monitoring", "System/i18n", "System/Audio", [ 39s] -"API/C API", "API/Web API", "Application Framwork/Libraries", "Application [ 39s] -Framework/Package Management", "Application Framework/Alarm", "Application [ 39s] -Framework/Libraries", "Application Framework/Application State Management", [ 39s] -"Application Framework/Database", "Application Framework/Notifications", [ 39s] -"Application Framework/Settings", "Applications/Core Applications", [ 39s] -"Base/Compression", "Base/Device Management", "Base/File Systems", "Base/IPC", [ 39s] -"Base/Libraries", "Base/Package Management", "Base/Startup", "Base/Toolchain", [ 39s] -"Base/Tools", "Base/Configuration", "Connectivity/Bluetooth", [ 39s] -"Connectivity/Connection Management", "Connectivity/DNS", "Connectivity/HTTP", [ 39s] -"Connectivity/NFC", "Connectivity/Wireless", "Documentation", [ 39s] -"Development/Tools", "Development/Languages", "Development/Toolchain", [ 39s] ... saving built packages [ 39s] /home/abuild/rpmbuild/RPMS/noarch/perl-Test-Pod-Coverage-1.08-1.3.noarch.rpm [ 39s] /home/abuild/rpmbuild/RPMS/noarch/perl-Test-Pod-Coverage-debugsource-1.08-1.3.noarch.rpm [ 39s] /home/abuild/rpmbuild/SRPMS/perl-Test-Pod-Coverage-1.08-1.3.src.rpm [ 39s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 39s] [ 39s] w02 finished "build perl-Test-Pod-Coverage.spec" at Thu May 30 20:52:12 UTC 2013. [ 39s] [ 42s] [ 36.382629] SysRq : Power Off [ 44s] [ 37.869246] Power down. [ 44s] build: extracting built packages... [ 44s] perl-Test-Pod-Coverage-1.08-1.3.noarch.rpm [ 44s] perl-Test-Pod-Coverage-debugsource-1.08-1.3.noarch.rpm [ 44s] perl-Test-Pod-Coverage-1.08-1.3.src.rpm [ 44s] rpmlint.log Retried build at Wed Jun 12 14:28:11 2013 returned same result, skipped Retried build at Sat Jun 15 02:39:06 2013 returned same result, skipped Retried build at Sat Jun 15 12:31:36 2013 returned same result, skipped