[ 0s] Using BUILD_ROOT=/srv/build/root_2/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_2/root [ 0s] [ 0s] [ 0s] w06 started "build ragel.spec" at Sat Jun 1 02:48:02 UTC 2013. [ 0s] [ 0s] Building ragel for project 'Tizen' repository 'standard' arch 'i586' srcmd5 'da6990c9d4ff5d08228a89268f7928b1' [ 0s] [ 0s] processing specfile /srv/build/root_2/.build-srcdir/ragel.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_2/.build-srcdir/ragel.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_2/.build.rpmlist /srv/build/root_2/.build-srcdir/ragel.spec build rpmlint-Factory ... [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/34] preinstalling libmagic-data... [ 1s] [2/34] preinstalling setup... [ 1s] [3/34] preinstalling filesystem... [ 1s] [4/34] preinstalling glibc... [ 1s] [5/34] preinstalling bash... [ 1s] [6/34] preinstalling diffutils... [ 1s] [7/34] preinstalling grep... [ 1s] [8/34] preinstalling libattr... [ 1s] [9/34] preinstalling libbz2... [ 1s] [10/34] preinstalling libcap... [ 1s] [11/34] preinstalling libelf... [ 1s] [12/34] preinstalling libfreebl3... [ 1s] [13/34] preinstalling liblua... [ 1s] [14/34] preinstalling liblzma... [ 1s] [15/34] preinstalling libncurses... [ 1s] [16/34] preinstalling libpopt... [ 1s] [17/34] preinstalling libsmack... [ 1s] [18/34] preinstalling libsqlite... [ 2s] [19/34] preinstalling nspr... [ 2s] [20/34] preinstalling sed... [ 2s] [21/34] preinstalling tar... [ 2s] [22/34] preinstalling zlib... [ 2s] [23/34] preinstalling libacl... [ 2s] [24/34] preinstalling libgcc47... [ 2s] [25/34] preinstalling libreadline... [ 2s] [26/34] preinstalling smack... [ 2s] [27/34] preinstalling bzip2... [ 2s] [28/34] preinstalling libmagic... [ 2s] [29/34] preinstalling libxml2... [ 2s] [30/34] preinstalling coreutils... [ 3s] [31/34] preinstalling nss... [ 3s] [32/34] preinstalling libsoftokn3... [ 3s] [33/34] preinstalling rpm... [ 3s] [34/34] preinstalling rpm-security-plugin... [ 3s] [ 3s] [1/8] preinstalling libext2fs... [ 3s] [2/8] preinstalling libpcre... [ 4s] [3/8] preinstalling libuuid... [ 4s] [4/8] preinstalling perl... [ 5s] [5/8] preinstalling grep... [ 5s] [6/8] preinstalling libblkid... [ 5s] [7/8] preinstalling libmount... [ 5s] [8/8] preinstalling util-linux... [ 5s] copying packages... [ 6s] reordering...cycle: nss -> libsoftokn3 [ 6s] breaking dependency nss -> libsoftokn3 [ 6s] cycle: coreutils -> pam [ 6s] breaking dependency pam -> coreutils [ 6s] done [ 6s] booting kvm ... [ 6s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -net none -cpu host -kernel /srv/kernel/vmlinuz -initrd /srv/kernel/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm -m 8192 -drive file=/srv/build/root_2/root,if=virtio,cache=unsafe -drive file=/srv/build/root_2/root,if=ide,index=0,cache=unsafe -drive file=/srv/build/root_2/swap,if=virtio,cache=unsafe -smp 4 [ 7s]  [ 7s] Google, Inc. [ 7s] Serial Graphics Adapter 09/05/12 [ 7s] SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (abuild@build24) Wed Sep 5 14:01:11 UTC 2012 [ 7s] 4 0 [ 7s]  SeaBIOS (version 1.6.3-20120905_140109) [ 7s] [ 7s] Booting from ROM... [ 10s] doing fast boot [ 10s] Creating device nodes with udev [ 11s] udevd[224]: failed to execute '/etc/sysconfig/network/scripts/ifup-sysctl' '/etc/sysconfig/network/scripts/ifup-sysctl lo -o hotplug': No such file or directory [ 11s] [ 11s] Waiting for device /dev/vda to appear: ok [ 11s] fsck from util-linux 2.20.1 [ 11s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 11s] /dev/vda: clean, 5110/2097152 files, 178989/8388608 blocks [ 11s] fsck succeeded. Mounting root device read-write. [ 11s] Mounting root /dev/vda [ 11s] mount -o rw,noatime,acl,user_xattr -t ext4 /dev/vda /root [ 11s] replacing /etc/mtab with symlink to /proc/self/mounts [ 11s] sh: /sbin/modprobe: No such file or directory [ 11s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 11s] /.build/qemu-reg: line 8: interpreter '/usr/bin/qemu-arm-binfmt' not found, ignoring [ 11s] /.build/qemu-reg: line 9: interpreter '/usr/bin/qemu-armeb-binfmt' not found, ignoring [ 11s] /.build/qemu-reg: line 10: interpreter '/usr/bin/qemu-ppc-binfmt' not found, ignoring [ 11s] /.build/qemu-reg: line 11: interpreter '/usr/bin/qemu-mips-binfmt' not found, ignoring [ 11s] /.build/qemu-reg: line 12: interpreter '/usr/bin/qemu-mipsel-binfmt' not found, ignoring [ 11s] /.build/qemu-reg: line 18: interpreter '/usr/bin/qemu-sh4-binfmt' not found, ignoring [ 11s] /.build/qemu-reg: line 19: interpreter '/usr/bin/qemu-sh4eb-binfmt' not found, ignoring [ 11s] 2nd stage started in virtual machine [ 11s] machine type: x86_64 [ 11s] switching personality to 8... [ 11s] 2nd stage started in virtual machine [ 11s] machine type: i686 [ 11s] [ 2.009262] EXT4-fs (vda): Cannot change data mode on remount [ 11s] mount: / not mounted or bad option [ 11s] In some cases useful info is found in syslog - try [ 11s] dmesg | tail or so [ 11s] swapon /dev/vdb [ 11s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 11s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 11s] *********************************** [ 11s] VM_TYPE: kvm script: /.build/build [ 11s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 11s] mount: none is already mounted or /proc busy [ 11s] mount: none is already mounted or /dev/pts busy [ 11s] logging output to //.build.log... [ 11s] processing specfile /.build-srcdir/ragel.spec ... [ 11s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/ragel.spec build rpmlint-Factory ... [ 11s] running setup postinstall script [ 11s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 11s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 11s] initializing rpm db... [ 12s] [1/94] installing libmagic-data-5.11-1.3 [ 12s] [2/94] installing setup-0.9-1.3 [ 12s] [3/94] installing terminfo-base-5.9-1.3 [ 12s] [4/94] installing filesystem-3.1-2.1 [ 12s] error: Failed to set SMACK64 _ for /proc: Operation not supported [ 12s] [5/94] installing glibc-2.17-1.10 [ 12s] [6/94] installing bash-4.2-1.3 [ 12s] [7/94] installing cpio-2.11-3.3 [ 12s] [8/94] installing diffutils-3.2-1.4 [ 12s] [9/94] installing findutils-4.5.10-1.3 [ 12s] [10/94] installing hostname-3.12-1.3 [ 12s] [11/94] installing libattr-2.4.46-1.3 [ 12s] [12/94] installing libbz2-1.0.6-1.10 [ 12s] [13/94] installing libcap-2.22-1.10 [ 12s] [14/94] installing libelf-0.153-1.6 [ 12s] [15/94] installing libext2fs-1.42.6-1.3 [ 13s] [16/94] installing libfreebl3-3.13.6-1.28 [ 13s] [17/94] installing libgdbm-1.10-1.3 [ 13s] [18/94] installing libgmp-5.0.5-1.4 [ 13s] [19/94] installing libltdl-2.4.2-1.2 [ 13s] [20/94] installing liblua-5.1.4-1.3 [ 13s] [21/94] installing liblzma-5.0.3-1.3 [ 13s] [22/94] installing libpcre-8.31-1.3 [ 13s] [23/94] installing libpopt-1.16-1.3 [ 13s] [24/94] installing libsmack-1.0-4.3 [ 13s] [25/94] installing libsqlite-3.7.14-1.3 [ 13s] [26/94] installing libuuid-2.22.2-1.7 [ 13s] [27/94] installing m4-1.4.16-1.3 [ 13s] [28/94] installing net-tools-2.0_20121208git-1.3 [ 13s] [29/94] installing nspr-4.9.2-1.3 [ 13s] [30/94] installing patch-2.7-1.2 [ 13s] [31/94] installing pkg-config-0.28-1.3 [ 13s] [32/94] installing sed-4.2.1-1.3 [ 13s] [33/94] installing tar-1.26-1.3 [ 13s] [34/94] installing update-alternatives-1.16.3-1.2 [ 13s] [35/94] installing which-2.20-4.3 [ 13s] [36/94] installing zlib-1.2.7-1.4 [ 14s] [37/94] installing libncurses-5.9-1.3 [ 14s] [38/94] installing build-compare-2012.01.26-1.6 [ 14s] [39/94] installing gawk-4.0.1-1.3 [ 14s] [40/94] installing grep-2.14-1.3 [ 14s] [41/94] installing less-451-5.3 [ 14s] [42/94] installing libacl-2.2.51-2.3 [ 14s] [43/94] installing libasm-0.153-1.6 [ 14s] [44/94] installing libblkid-2.22.2-1.7 [ 14s] [45/94] installing libgcc47-4.7.2-1.16 [ 14s] [46/94] installing libgomp47-4.7.2-1.16 [ 14s] [47/94] installing libmpfr-3.1.1-1.3 [ 14s] [48/94] installing libreadline-5.2-1.6 [ 14s] [49/94] installing make-3.82-2.1 [ 14s] [50/94] installing nss-certs-3.13.6-1.28 [ 14s] [51/94] installing smack-1.0-4.3 [ 14s] [52/94] installing bzip2-1.0.6-1.10 [ 14s] [53/94] installing libmagic-5.11-1.3 [ 14s] [54/94] installing libxml2-2.8.0-1.3 [ 14s] [55/94] installing xz-5.0.3-1.3 [ 14s] [56/94] installing binutils-2.23.1-1.3 [ 17s] update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode. [ 17s] [57/94] installing libdw-0.153-1.6 [ 17s] [58/94] installing file-5.11-1.3 [ 17s] [59/94] installing libmount-2.22.2-1.7 [ 17s] [60/94] installing libmpc-1.0-1.3 [ 17s] [61/94] installing libstdc++47-4.7.2-1.16 [ 17s] [62/94] installing db4-4.8.30.NC-1.3 [ 17s] [63/94] installing libgmpxx-5.0.5-1.4 [ 17s] [64/94] installing elfutils-0.153-1.6 [ 17s] [65/94] installing libppl-0.11.2-1.8 [ 17s] [66/94] installing perl-5.16.3-1.9 [ 26s] [67/94] installing build-mkbaselibs-20120927-1.3 [ 26s] [68/94] installing autoconf-2.69-1.3 [ 27s] [69/94] installing libppl_c-0.11.2-1.8 [ 27s] [70/94] installing libcloog-0.15.10-1.3 [ 27s] [71/94] installing build-20120927-1.3 [ 27s] [72/94] installing cpp47-4.7.2-1.16 [ 27s] [73/94] installing cpp-4.7-1.3 [ 27s] [74/94] installing pam-1.1.6-1.4 [ 27s] [75/94] installing nss-3.13.6-1.28 [ 28s] [76/94] installing libsoftokn3-3.13.6-1.28 [ 28s] [77/94] installing coreutils-8.21-1.3 [ 28s] [78/94] installing util-linux-2.22.2-1.7 [ 28s] [79/94] installing rpm-4.11.0.1-1.3 [ 28s] [80/94] installing linux-glibc-devel-3.4.0-1.3 [ 30s] [81/94] installing gzip-1.5-1.3 [ 30s] [82/94] installing automake-1.12.1-1.3 [ 31s] [83/94] installing tzdata-2012e-1.2 [ 31s] [84/94] installing rpmlint-mini-1.4-1.7 [ 31s] [85/94] installing rpm-security-plugin-4.11.0.1-1.3 [ 31s] warning: /etc/device-sec-policy created as /etc/device-sec-policy.rpmnew [ 31s] [86/94] installing rpmlint-tizen-1.0-4.2 [ 31s] [87/94] installing glibc-devel-2.17-1.10 [ 33s] [88/94] installing libtool-2.4.2-1.2 [ 33s] [89/94] installing libstdc++47-devel-4.7.2-1.16 [ 35s] [90/94] installing gcc47-4.7.2-1.16 [ 36s] [91/94] installing gcc-4.7-1.3 [ 36s] [92/94] installing gcc47-c++-4.7.2-1.16 [ 36s] [93/94] installing gcc-c++-4.7-1.3 [ 36s] [94/94] installing rpm-build-4.11.0.1-1.3 [ 36s] removing nis flags from //etc/nsswitch.conf... [ 37s] now finalizing build dir... [ 37s] build target is i686-tizen-linux [ 37s] ----------------------------------------------------------------- [ 37s] I have the following modifications for ragel.spec: [ 37s] 4c4 [ 37s] < Release: 1 [ 37s] --- [ 37s] > Release: 3.1 [ 37s] 42a43 [ 37s] > %changelog [ 37s] ----------------------------------------------------------------- [ 37s] ----- building ragel.spec (user abuild) [ 37s] ----------------------------------------------------------------- [ 37s] ----------------------------------------------------------------- [ 37s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen/standard/da6990c9d4ff5d08228a89268f7928b1-ragel' /home/abuild/rpmbuild/SOURCES/ragel.spec [ 37s] Building target platforms: i686-tizen-linux [ 37s] Building for target i686-tizen-linux [ 37s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.8ldBHy [ 37s] + umask 022 [ 37s] + cd /home/abuild/rpmbuild/BUILD [ 37s] + cd /home/abuild/rpmbuild/BUILD [ 37s] + rm -rf ragel-6.6 [ 37s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/ragel-6.6.tar.gz [ 37s] + /bin/tar -xf - [ 37s] + STATUS=0 [ 37s] + '[' 0 -ne 0 ']' [ 37s] + cd ragel-6.6 [ 37s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 37s] + exit 0 [ 37s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.iK5USq [ 37s] + umask 022 [ 37s] + cd /home/abuild/rpmbuild/BUILD [ 37s] + cd ragel-6.6 [ 37s] + LANG=C [ 37s] + export LANG [ 37s] + unset DISPLAY [ 37s] + CFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [ 37s] + export CFLAGS [ 37s] + CXXFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [ 37s] + export CXXFLAGS [ 37s] + FFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -I%_fmoddir' [ 37s] + export FFLAGS [ 37s] + LD_AS_NEEDED=1 [ 37s] + export LD_AS_NEEDED [ 37s] + CFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [ 37s] + export CFLAGS [ 37s] + CXXFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [ 37s] + export CXXFLAGS [ 37s] + FFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -I%_fmoddir' [ 37s] + export FFLAGS [ 37s] + ./autogen.sh --build=i686-tizen-linux-gnu --host=i686-tizen-linux-gnu --target=i686-tizen-linux --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info.sh [ 38s] configure.in:24: installing './install-sh' [ 38s] configure.in:24: installing './missing' [ 38s] examples/Makefile.am: installing './depcomp' [ 39s] + CFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [ 39s] + export CFLAGS [ 39s] + CXXFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [ 39s] + export CXXFLAGS [ 39s] + FFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -I%_fmoddir' [ 39s] + export FFLAGS [ 39s] + ./configure --build=i686-tizen-linux-gnu --host=i686-tizen-linux-gnu --target=i686-tizen-linux --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr [ 39s] checking for a BSD-compatible install... /bin/install -c [ 39s] checking whether build environment is sane... yes [ 39s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 39s] checking for gawk... gawk [ 39s] checking whether make sets $(MAKE)... yes [ 39s] checking for ./DIST... yes [ 39s] checking for i686-tizen-linux-gnu-gcc... no [ 39s] checking for gcc... gcc [ 39s] checking whether the C compiler works... yes [ 39s] checking for C compiler default output file name... a.out [ 39s] checking for suffix of executables... [ 39s] checking whether we are cross compiling... no [ 39s] checking for suffix of object files... o [ 39s] checking whether we are using the GNU C compiler... yes [ 39s] checking whether gcc accepts -g... yes [ 39s] checking for gcc option to accept ISO C89... none needed [ 39s] checking for style of include used by make... GNU [ 39s] checking dependency style of gcc... gcc3 [ 39s] checking for i686-tizen-linux-gnu-g++... no [ 39s] checking for i686-tizen-linux-gnu-c++... no [ 39s] checking for i686-tizen-linux-gnu-gpp... no [ 39s] checking for i686-tizen-linux-gnu-aCC... no [ 39s] checking for i686-tizen-linux-gnu-CC... no [ 39s] checking for i686-tizen-linux-gnu-cxx... no [ 39s] checking for i686-tizen-linux-gnu-cc++... no [ 39s] checking for i686-tizen-linux-gnu-cl.exe... no [ 39s] checking for i686-tizen-linux-gnu-FCC... no [ 39s] checking for i686-tizen-linux-gnu-KCC... no [ 39s] checking for i686-tizen-linux-gnu-RCC... no [ 39s] checking for i686-tizen-linux-gnu-xlC_r... no [ 39s] checking for i686-tizen-linux-gnu-xlC... no [ 39s] checking for g++... g++ [ 39s] checking whether we are using the GNU C++ compiler... yes [ 39s] checking whether g++ accepts -g... yes [ 39s] checking dependency style of g++... gcc3 [ 39s] checking for i686-tizen-linux-gnu-ar... no [ 39s] checking for ar... ar [ 39s] checking for i686-tizen-linux-gnu-ranlib... no [ 39s] checking for ranlib... ranlib [ 39s] checking whether make sets $(MAKE)... (cached) yes [ 39s] checking for gdc... no [ 39s] checking for the Objective-C compiler... no [ 39s] checking for javac... no [ 39s] checking for txl... no [ 39s] checking for ruby... no [ 39s] checking for gmcs... no [ 40s] checking that generated files are newer than configure... done [ 40s] configure: creating ./config.status [ 40s] config.status: creating Makefile [ 40s] config.status: creating ragel/Makefile [ 40s] config.status: creating aapl/Makefile [ 40s] config.status: creating doc/Makefile [ 40s] config.status: creating doc/ragel.1 [ 40s] config.status: creating contrib/Makefile [ 40s] config.status: creating test/Makefile [ 40s] config.status: creating test/runtests [ 40s] config.status: creating examples/Makefile [ 40s] config.status: creating ragel/config.h [ 40s] config.status: executing depfiles commands [ 40s] config.status: executing default commands [ 40s] configuration of ragel complete [ 40s] + make -j4 [ 40s] Making all in ragel [ 40s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ragel-6.6/ragel' [ 40s] echo '#define VERSION "6.6"' > version.h [ 40s] echo '#define PUBDATE "Dec 2009"' >> version.h [ 40s] make all-am [ 40s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ragel-6.6/ragel' [ 40s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-main.o -MD -MP -MF .deps/ragel-main.Tpo -c -o ragel-main.o `test -f 'main.cpp' || echo './'`main.cpp [ 40s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-parsetree.o -MD -MP -MF .deps/ragel-parsetree.Tpo -c -o ragel-parsetree.o `test -f 'parsetree.cpp' || echo './'`parsetree.cpp [ 40s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-parsedata.o -MD -MP -MF .deps/ragel-parsedata.Tpo -c -o ragel-parsedata.o `test -f 'parsedata.cpp' || echo './'`parsedata.cpp [ 40s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-fsmstate.o -MD -MP -MF .deps/ragel-fsmstate.Tpo -c -o ragel-fsmstate.o `test -f 'fsmstate.cpp' || echo './'`fsmstate.cpp [ 40s] In file included from fsmstate.cpp:24:0: [ 40s] fsmgraph.h: In instantiation of 'void PairIter::findNext() [with ListItem1 = TransAp; ListItem2 = TransAp]': [ 40s] fsmgraph.h:854:2: required from 'PairIter::PairIter(ListItem1*, ListItem2*) [with ListItem1 = TransAp; ListItem2 = TransAp]' [ 40s] fsmstate.cpp:198:72: required from here [ 40s] fsmgraph.h:878:7: warning: variable 'backIn' set but not used [-Wunused-but-set-variable] [ 40s] fsmgraph.h: In instantiation of 'void PairIter::findNext() [with ListItem1 = StateCond; ListItem2 = StateCond]': [ 40s] fsmgraph.h:854:2: required from 'PairIter::PairIter(ListItem1*, ListItem2*) [with ListItem1 = StateCond; ListItem2 = StateCond]' [ 40s] fsmstate.cpp:260:87: required from here [ 40s] fsmgraph.h:878:7: warning: variable 'backIn' set but not used [-Wunused-but-set-variable] [ 41s] mv -f .deps/ragel-fsmstate.Tpo .deps/ragel-fsmstate.Po [ 41s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-fsmbase.o -MD -MP -MF .deps/ragel-fsmbase.Tpo -c -o ragel-fsmbase.o `test -f 'fsmbase.cpp' || echo './'`fsmbase.cpp [ 41s] mv -f .deps/ragel-main.Tpo .deps/ragel-main.Po [ 41s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-fsmattach.o -MD -MP -MF .deps/ragel-fsmattach.Tpo -c -o ragel-fsmattach.o `test -f 'fsmattach.cpp' || echo './'`fsmattach.cpp [ 41s] mv -f .deps/ragel-parsetree.Tpo .deps/ragel-parsetree.Po [ 41s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-fsmmin.o -MD -MP -MF .deps/ragel-fsmmin.Tpo -c -o ragel-fsmmin.o `test -f 'fsmmin.cpp' || echo './'`fsmmin.cpp [ 41s] In file included from fsmattach.cpp:24:0: [ 41s] fsmgraph.h: In instantiation of 'void PairIter::findNext() [with ListItem1 = TransAp; ListItem2 = TransAp]': [ 41s] fsmgraph.h:854:2: required from 'PairIter::PairIter(ListItem1*, ListItem2*) [with ListItem1 = TransAp; ListItem2 = TransAp]' [ 41s] fsmattach.cpp:348:57: required from here [ 41s] fsmgraph.h:878:7: warning: variable 'backIn' set but not used [-Wunused-but-set-variable] [ 41s] mv -f .deps/ragel-parsedata.Tpo .deps/ragel-parsedata.Po [ 41s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-fsmgraph.o -MD -MP -MF .deps/ragel-fsmgraph.Tpo -c -o ragel-fsmgraph.o `test -f 'fsmgraph.cpp' || echo './'`fsmgraph.cpp [ 41s] mv -f .deps/ragel-fsmattach.Tpo .deps/ragel-fsmattach.Po [ 41s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-fsmap.o -MD -MP -MF .deps/ragel-fsmap.Tpo -c -o ragel-fsmap.o `test -f 'fsmap.cpp' || echo './'`fsmap.cpp [ 41s] mv -f .deps/ragel-fsmbase.Tpo .deps/ragel-fsmbase.Po [ 41s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-rlscan.o -MD -MP -MF .deps/ragel-rlscan.Tpo -c -o ragel-rlscan.o `test -f 'rlscan.cpp' || echo './'`rlscan.cpp [ 41s] In file included from fsmgraph.cpp:25:0: [ 41s] fsmgraph.h: In instantiation of 'void PairIter::findNext() [with ListItem1 = TransAp; ListItem2 = StateCond]': [ 41s] fsmgraph.h:854:2: required from 'PairIter::PairIter(ListItem1*, ListItem2*) [with ListItem1 = TransAp; ListItem2 = StateCond]' [ 41s] fsmgraph.cpp:933:33: required from here [ 41s] fsmgraph.h:878:7: warning: variable 'backIn' set but not used [-Wunused-but-set-variable] [ 41s] fsmgraph.h: In instantiation of 'void PairIter::findNext() [with ListItem1 = TransAp; ListItem2 = TransAp]': [ 41s] fsmgraph.h:854:2: required from 'PairIter::PairIter(ListItem1*, ListItem2*) [with ListItem1 = TransAp; ListItem2 = TransAp]' [ 41s] fsmgraph.cpp:970:64: required from here [ 41s] fsmgraph.h:878:7: warning: variable 'backIn' set but not used [-Wunused-but-set-variable] [ 41s] fsmgraph.h: In instantiation of 'void PairIter::findNext() [with ListItem1 = StateCond; ListItem2 = StateCond]': [ 41s] fsmgraph.h:854:2: required from 'PairIter::PairIter(ListItem1*, ListItem2*) [with ListItem1 = StateCond; ListItem2 = StateCond]' [ 41s] fsmgraph.cpp:1001:33: required from here [ 41s] fsmgraph.h:878:7: warning: variable 'backIn' set but not used [-Wunused-but-set-variable] [ 41s] fsmgraph.h: In instantiation of 'void PairIter::findNext() [with ListItem1 = TransAp; ListItem2 = Removal]': [ 41s] fsmgraph.h:854:2: required from 'PairIter::PairIter(ListItem1*, ListItem2*) [with ListItem1 = TransAp; ListItem2 = Removal]' [ 41s] fsmgraph.cpp:1104:74: required from here [ 41s] fsmgraph.h:878:7: warning: variable 'backIn' set but not used [-Wunused-but-set-variable] [ 41s] mv -f .deps/ragel-fsmmin.Tpo .deps/ragel-fsmmin.Po [ 41s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-rlparse.o -MD -MP -MF .deps/ragel-rlparse.Tpo -c -o ragel-rlparse.o `test -f 'rlparse.cpp' || echo './'`rlparse.cpp [ 41s] mv -f .deps/ragel-fsmap.Tpo .deps/ragel-fsmap.Po [ 41s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-inputdata.o -MD -MP -MF .deps/ragel-inputdata.Tpo -c -o ragel-inputdata.o `test -f 'inputdata.cpp' || echo './'`inputdata.cpp [ 42s] mv -f .deps/ragel-fsmgraph.Tpo .deps/ragel-fsmgraph.Po [ 42s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-common.o -MD -MP -MF .deps/ragel-common.Tpo -c -o ragel-common.o `test -f 'common.cpp' || echo './'`common.cpp [ 42s] mv -f .deps/ragel-common.Tpo .deps/ragel-common.Po [ 42s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-redfsm.o -MD -MP -MF .deps/ragel-redfsm.Tpo -c -o ragel-redfsm.o `test -f 'redfsm.cpp' || echo './'`redfsm.cpp [ 42s] mv -f .deps/ragel-rlscan.Tpo .deps/ragel-rlscan.Po [ 42s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-gendata.o -MD -MP -MF .deps/ragel-gendata.Tpo -c -o ragel-gendata.o `test -f 'gendata.cpp' || echo './'`gendata.cpp [ 42s] mv -f .deps/ragel-rlparse.Tpo .deps/ragel-rlparse.Po [ 42s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-cdcodegen.o -MD -MP -MF .deps/ragel-cdcodegen.Tpo -c -o ragel-cdcodegen.o `test -f 'cdcodegen.cpp' || echo './'`cdcodegen.cpp [ 42s] mv -f .deps/ragel-inputdata.Tpo .deps/ragel-inputdata.Po [ 42s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-cdtable.o -MD -MP -MF .deps/ragel-cdtable.Tpo -c -o ragel-cdtable.o `test -f 'cdtable.cpp' || echo './'`cdtable.cpp [ 42s] mv -f .deps/ragel-redfsm.Tpo .deps/ragel-redfsm.Po [ 42s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-cdftable.o -MD -MP -MF .deps/ragel-cdftable.Tpo -c -o ragel-cdftable.o `test -f 'cdftable.cpp' || echo './'`cdftable.cpp [ 42s] mv -f .deps/ragel-cdcodegen.Tpo .deps/ragel-cdcodegen.Po [ 42s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-cdflat.o -MD -MP -MF .deps/ragel-cdflat.Tpo -c -o ragel-cdflat.o `test -f 'cdflat.cpp' || echo './'`cdflat.cpp [ 42s] mv -f .deps/ragel-gendata.Tpo .deps/ragel-gendata.Po [ 42s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-cdfflat.o -MD -MP -MF .deps/ragel-cdfflat.Tpo -c -o ragel-cdfflat.o `test -f 'cdfflat.cpp' || echo './'`cdfflat.cpp [ 42s] mv -f .deps/ragel-cdtable.Tpo .deps/ragel-cdtable.Po [ 42s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-cdgoto.o -MD -MP -MF .deps/ragel-cdgoto.Tpo -c -o ragel-cdgoto.o `test -f 'cdgoto.cpp' || echo './'`cdgoto.cpp [ 42s] mv -f .deps/ragel-cdftable.Tpo .deps/ragel-cdftable.Po [ 42s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-cdfgoto.o -MD -MP -MF .deps/ragel-cdfgoto.Tpo -c -o ragel-cdfgoto.o `test -f 'cdfgoto.cpp' || echo './'`cdfgoto.cpp [ 43s] mv -f .deps/ragel-cdfflat.Tpo .deps/ragel-cdfflat.Po [ 43s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-cdipgoto.o -MD -MP -MF .deps/ragel-cdipgoto.Tpo -c -o ragel-cdipgoto.o `test -f 'cdipgoto.cpp' || echo './'`cdipgoto.cpp [ 43s] mv -f .deps/ragel-cdflat.Tpo .deps/ragel-cdflat.Po [ 43s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-cdsplit.o -MD -MP -MF .deps/ragel-cdsplit.Tpo -c -o ragel-cdsplit.o `test -f 'cdsplit.cpp' || echo './'`cdsplit.cpp [ 43s] mv -f .deps/ragel-cdfgoto.Tpo .deps/ragel-cdfgoto.Po [ 43s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-javacodegen.o -MD -MP -MF .deps/ragel-javacodegen.Tpo -c -o ragel-javacodegen.o `test -f 'javacodegen.cpp' || echo './'`javacodegen.cpp [ 43s] mv -f .deps/ragel-cdgoto.Tpo .deps/ragel-cdgoto.Po [ 43s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-rubycodegen.o -MD -MP -MF .deps/ragel-rubycodegen.Tpo -c -o ragel-rubycodegen.o `test -f 'rubycodegen.cpp' || echo './'`rubycodegen.cpp [ 43s] mv -f .deps/ragel-cdipgoto.Tpo .deps/ragel-cdipgoto.Po [ 43s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-rubytable.o -MD -MP -MF .deps/ragel-rubytable.Tpo -c -o ragel-rubytable.o `test -f 'rubytable.cpp' || echo './'`rubytable.cpp [ 43s] mv -f .deps/ragel-cdsplit.Tpo .deps/ragel-cdsplit.Po [ 43s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-rubyftable.o -MD -MP -MF .deps/ragel-rubyftable.Tpo -c -o ragel-rubyftable.o `test -f 'rubyftable.cpp' || echo './'`rubyftable.cpp [ 43s] mv -f .deps/ragel-rubycodegen.Tpo .deps/ragel-rubycodegen.Po [ 43s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-rubyflat.o -MD -MP -MF .deps/ragel-rubyflat.Tpo -c -o ragel-rubyflat.o `test -f 'rubyflat.cpp' || echo './'`rubyflat.cpp [ 43s] mv -f .deps/ragel-javacodegen.Tpo .deps/ragel-javacodegen.Po [ 43s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-rubyfflat.o -MD -MP -MF .deps/ragel-rubyfflat.Tpo -c -o ragel-rubyfflat.o `test -f 'rubyfflat.cpp' || echo './'`rubyfflat.cpp [ 44s] mv -f .deps/ragel-rubyftable.Tpo .deps/ragel-rubyftable.Po [ 44s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-rbxgoto.o -MD -MP -MF .deps/ragel-rbxgoto.Tpo -c -o ragel-rbxgoto.o `test -f 'rbxgoto.cpp' || echo './'`rbxgoto.cpp [ 44s] mv -f .deps/ragel-rubytable.Tpo .deps/ragel-rubytable.Po [ 44s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-cscodegen.o -MD -MP -MF .deps/ragel-cscodegen.Tpo -c -o ragel-cscodegen.o `test -f 'cscodegen.cpp' || echo './'`cscodegen.cpp [ 44s] mv -f .deps/ragel-rubyflat.Tpo .deps/ragel-rubyflat.Po [ 44s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-cstable.o -MD -MP -MF .deps/ragel-cstable.Tpo -c -o ragel-cstable.o `test -f 'cstable.cpp' || echo './'`cstable.cpp [ 44s] mv -f .deps/ragel-rubyfflat.Tpo .deps/ragel-rubyfflat.Po [ 44s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-csftable.o -MD -MP -MF .deps/ragel-csftable.Tpo -c -o ragel-csftable.o `test -f 'csftable.cpp' || echo './'`csftable.cpp [ 44s] mv -f .deps/ragel-rbxgoto.Tpo .deps/ragel-rbxgoto.Po [ 44s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-csflat.o -MD -MP -MF .deps/ragel-csflat.Tpo -c -o ragel-csflat.o `test -f 'csflat.cpp' || echo './'`csflat.cpp [ 44s] mv -f .deps/ragel-cscodegen.Tpo .deps/ragel-cscodegen.Po [ 44s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-csfflat.o -MD -MP -MF .deps/ragel-csfflat.Tpo -c -o ragel-csfflat.o `test -f 'csfflat.cpp' || echo './'`csfflat.cpp [ 44s] mv -f .deps/ragel-csftable.Tpo .deps/ragel-csftable.Po [ 44s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-csgoto.o -MD -MP -MF .deps/ragel-csgoto.Tpo -c -o ragel-csgoto.o `test -f 'csgoto.cpp' || echo './'`csgoto.cpp [ 44s] mv -f .deps/ragel-cstable.Tpo .deps/ragel-cstable.Po [ 44s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-csfgoto.o -MD -MP -MF .deps/ragel-csfgoto.Tpo -c -o ragel-csfgoto.o `test -f 'csfgoto.cpp' || echo './'`csfgoto.cpp [ 44s] mv -f .deps/ragel-csfflat.Tpo .deps/ragel-csfflat.Po [ 44s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-csipgoto.o -MD -MP -MF .deps/ragel-csipgoto.Tpo -c -o ragel-csipgoto.o `test -f 'csipgoto.cpp' || echo './'`csipgoto.cpp [ 45s] mv -f .deps/ragel-csflat.Tpo .deps/ragel-csflat.Po [ 45s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-cssplit.o -MD -MP -MF .deps/ragel-cssplit.Tpo -c -o ragel-cssplit.o `test -f 'cssplit.cpp' || echo './'`cssplit.cpp [ 45s] mv -f .deps/ragel-csfgoto.Tpo .deps/ragel-csfgoto.Po [ 45s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-dotcodegen.o -MD -MP -MF .deps/ragel-dotcodegen.Tpo -c -o ragel-dotcodegen.o `test -f 'dotcodegen.cpp' || echo './'`dotcodegen.cpp [ 45s] mv -f .deps/ragel-csgoto.Tpo .deps/ragel-csgoto.Po [ 45s] g++ -DHAVE_CONFIG_H -I. -I../aapl -Wall -g -MT ragel-xmlcodegen.o -MD -MP -MF .deps/ragel-xmlcodegen.Tpo -c -o ragel-xmlcodegen.o `test -f 'xmlcodegen.cpp' || echo './'`xmlcodegen.cpp [ 45s] mv -f .deps/ragel-csipgoto.Tpo .deps/ragel-csipgoto.Po [ 45s] mv -f .deps/ragel-cssplit.Tpo .deps/ragel-cssplit.Po [ 45s] mv -f .deps/ragel-dotcodegen.Tpo .deps/ragel-dotcodegen.Po [ 45s] mv -f .deps/ragel-xmlcodegen.Tpo .deps/ragel-xmlcodegen.Po [ 45s] g++ -Wall -g -o ragel ragel-main.o ragel-parsetree.o ragel-parsedata.o ragel-fsmstate.o ragel-fsmbase.o ragel-fsmattach.o ragel-fsmmin.o ragel-fsmgraph.o ragel-fsmap.o ragel-rlscan.o ragel-rlparse.o ragel-inputdata.o ragel-common.o ragel-redfsm.o ragel-gendata.o ragel-cdcodegen.o ragel-cdtable.o ragel-cdftable.o ragel-cdflat.o ragel-cdfflat.o ragel-cdgoto.o ragel-cdfgoto.o ragel-cdipgoto.o ragel-cdsplit.o ragel-javacodegen.o ragel-rubycodegen.o ragel-rubytable.o ragel-rubyftable.o ragel-rubyflat.o ragel-rubyfflat.o ragel-rbxgoto.o ragel-cscodegen.o ragel-cstable.o ragel-csftable.o ragel-csflat.o ragel-csfflat.o ragel-csgoto.o ragel-csfgoto.o ragel-csipgoto.o ragel-cssplit.o ragel-dotcodegen.o ragel-xmlcodegen.o [ 46s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ragel-6.6/ragel' [ 46s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ragel-6.6/ragel' [ 46s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ragel-6.6' [ 46s] make[1]: Nothing to be done for `all-am'. [ 46s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ragel-6.6' [ 46s] + exit 0 [ 46s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.INC40O [ 46s] + umask 022 [ 46s] + cd /home/abuild/rpmbuild/BUILD [ 46s] + cd ragel-6.6 [ 46s] + LANG=C [ 46s] + export LANG [ 46s] + unset DISPLAY [ 46s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/ragel-6.6-3.1.i386 [ 46s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/ragel-6.6-3.1.i386 [ 46s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/ragel-6.6-3.1.i386 [ 46s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/ragel-6.6-3.1.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/ragel-6.6-3.1.i386 install [ 46s] Making install in ragel [ 46s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ragel-6.6/ragel' [ 46s] /bin/make install-am [ 46s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ragel-6.6/ragel' [ 46s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/ragel-6.6/ragel' [ 46s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/ragel-6.6-3.1.i386/usr/bin' [ 46s] /bin/install -c ragel '/home/abuild/rpmbuild/BUILDROOT/ragel-6.6-3.1.i386/usr/bin' [ 46s] make[3]: Nothing to be done for `install-data-am'. [ 46s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/ragel-6.6/ragel' [ 46s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ragel-6.6/ragel' [ 46s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ragel-6.6/ragel' [ 46s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ragel-6.6' [ 46s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ragel-6.6' [ 46s] make[2]: Nothing to be done for `install-exec-am'. [ 46s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/ragel-6.6-3.1.i386/usr/share/doc/ragel' [ 46s] /bin/install -c -m 644 CREDITS ChangeLog '/home/abuild/rpmbuild/BUILDROOT/ragel-6.6-3.1.i386/usr/share/doc/ragel' [ 46s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ragel-6.6' [ 46s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ragel-6.6' [ 46s] + rm -f /home/abuild/rpmbuild/BUILDROOT/ragel-6.6-3.1.i386/usr/share/info/dir [ 46s] + find /home/abuild/rpmbuild/BUILDROOT/ragel-6.6-3.1.i386 -regex '.*\.la$' [ 46s] + xargs rm -f -- [ 46s] + find /home/abuild/rpmbuild/BUILDROOT/ragel-6.6-3.1.i386 -regex '.*\.a$' [ 46s] + xargs rm -f -- [ 46s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/ragel-6.6-3.1.i386/usr/share/info [ 46s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/ragel-6.6-3.1.i386/usr/share/doc/packages [ 46s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/ragel-6.6-3.1.i386/usr/share/doc/ragel [ 46s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/ragel-6.6-3.1.i386/usr/share/doc/ragel-6.6 [ 46s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/ragel-6.6-3.1.i386/usr/share/gtk-doc [ 46s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/ragel-6.6-3.1.i386/usr/share/doc [ 46s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/ragel-6.6-3.1.i386/usr/share/man [ 46s] + find /home/abuild/rpmbuild/BUILDROOT/ragel-6.6-3.1.i386 -regex '.*/man/man./.*.[0-9]' [ 46s] + xargs rm -f -- [ 46s] + find /home/abuild/rpmbuild/BUILDROOT/ragel-6.6-3.1.i386 -regex '.*/man/../man./.*.[0-9]' [ 46s] + xargs rm -f -- [ 46s] + find /home/abuild/rpmbuild/BUILDROOT/ragel-6.6-3.1.i386 -regex '.*/man/man./.*.[0-9]pm' [ 46s] + xargs rm -f -- [ 46s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/ragel-6.6 [ 46s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/ragel-6.6-3.1.i386/usr/bin/ragel [ 46s] cpio: glibc-2.17/csu: Cannot stat: No such file or directory [ 46s] cpio: glibc-2.17/csu/elf-init.c: Cannot stat: No such file or directory [ 46s] cpio: glibc-2.17/csu/init.c: Cannot stat: No such file or directory [ 46s] cpio: glibc-2.17/sysdeps/i386/crti.S: Cannot stat: No such file or directory [ 46s] cpio: glibc-2.17/sysdeps/i386/crtn.S: Cannot stat: No such file or directory [ 46s] cpio: glibc-2.17/sysdeps/i386/start.S: Cannot stat: No such file or directory [ 46s] 3082 blocks [ 46s] + /usr/lib/rpm/brp-compress [ 46s] + /usr/lib/rpm/brp-tizen [ 46s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/ragel-6.6-3.1.i386 [ 46s] Processing files: ragel-6.6-3.1.i686 [ 46s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 46s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 46s] [ 46s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.Q8Az8d [ 46s] + umask 022 [ 46s] + cd /home/abuild/rpmbuild/BUILD [ 46s] + cd ragel-6.6 [ 46s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/ragel-6.6-3.1.i386/usr/share/licenses/ragel [ 46s] + export LICENSEDIR [ 46s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/ragel-6.6-3.1.i386/usr/share/licenses/ragel [ 46s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/ragel-6.6-3.1.i386/usr/share/licenses/ragel [ 46s] + exit 0 [ 46s] Provides: ragel = 6.6-3.1 ragel(x86-32) = 6.6-3.1 [ 46s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 46s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1.3) libgcc_s.so.1 libgcc_s.so.1(GCC_3.0) libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(CXXABI_1.3.1) libstdc++.so.6(GLIBCXX_3.4) [ 46s] Processing files: ragel-debugsource-6.6-3.1.i686 [ 46s] Provides: ragel-debugsource = 6.6-3.1 ragel-debugsource(x86-32) = 6.6-3.1 [ 46s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 46s] Processing files: ragel-debuginfo-6.6-3.1.i686 [ 46s] Provides: debuginfo(build-id) = d45486455f9ee239b04d0f3b583f10745974e67d [ 46s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 46s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/ragel-6.6-3.1.i386 [ 46s] Wrote: /home/abuild/rpmbuild/SRPMS/ragel-6.6-3.1.src.rpm [ 46s] Wrote: /home/abuild/rpmbuild/RPMS/i686/ragel-6.6-3.1.i686.rpm [ 47s] Wrote: /home/abuild/rpmbuild/RPMS/i686/ragel-debugsource-6.6-3.1.i686.rpm [ 48s] Wrote: /home/abuild/rpmbuild/RPMS/i686/ragel-debuginfo-6.6-3.1.i686.rpm [ 48s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.3nxuYu [ 48s] + umask 022 [ 48s] + cd /home/abuild/rpmbuild/BUILD [ 48s] + cd ragel-6.6 [ 48s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/ragel-6.6-3.1.i386 [ 48s] + exit 0 [ 48s] ... checking for files with abuild user/group [ 48s] [ 48s] RPMLINT report: [ 48s] =============== [ 49s] ragel.i686: W: unstripped-binary-or-object /usr/bin/ragel [ 49s] stripping debug info from binaries happens automatically according to global [ 49s] project settings. So there's normally no need to manually strip binaries. Left [ 49s] over unstripped binaries could therefore indicate a bug in the automatic [ 49s] stripping process. [ 49s] [ 49s] ragel.i686: W: no-url-tag [ 49s] ragel.src: W: no-url-tag [ 49s] The URL tag is missing. Please add a http or ftp link to the project location. [ 49s] [ 49s] ragel.i686: W: name-repeated-in-summary C Ragel [ 49s] ragel.src: W: name-repeated-in-summary C Ragel [ 49s] The name of the package is repeated in its summary. This is often redundant [ 49s] information and looks silly in various programs' output. Make the summary [ 49s] brief and to the point without including redundant information in it. [ 49s] [ 49s] 2 packages and 0 specfiles checked; 0 errors, 5 warnings. [ 49s] [ 49s] ... creating baselibs [ 49s] ... comparing built packages with the former built [ 49s] /usr/lib/build/rpm-check.sh [ 49s] compare /.build.oldpackages/ragel-6.6-2.2.src.rpm /home/abuild/rpmbuild/SRPMS/ragel-6.6-3.1.src.rpm [ 49s] --- /tmp/tmp.ibEoQBgY1v 2013-06-01 02:48:50.390157334 +0000 [ 49s] +++ /tmp/tmp.udXyb5tiIz 2013-06-01 02:48:50.406157331 +0000 [ 49s] @@ -1,5 +1,5 @@ [ 49s] ragel 6.6 (none) [ 49s] - Ragel [ 49s] + Ragel State Machine Compiler [ 49s] compiles finite state machines into code in various languages [ 49s] Ragel compiles finite state machines from regular languages into C, C++, [ 49s] Objective-C, D, Ruby or Java code. Ragel allows the programmer to embed [ 49s] @@ -10,9 +10,9 @@ [ 49s] create robust recognizers and parsers which run very fast. It can work [ 49s] with integer-sized alphabets and can compile large state machines. [ 49s] The generated code has no dependencies. [ 49s] - tizen Tizen obs://build.tizen.org/Tizen/standard/f28d84a21eb8244efef208fbb0e5fca3-ragel TO BE FILLED IN TO BE FILLED IN [ 49s] - TO_BE/FILLED_IN (none) (none) (none) (none) [ 49s] + tizen Tizen obs://build.tizen.org/Tizen/standard/da6990c9d4ff5d08228a89268f7928b1-ragel GPL-2.0 GPL-2.0 [ 49s] + System/Utilities (none) (none) (none) (none) [ 49s] (none) 4.11.0.1 (none) [ 49s] cpio gzip 9 [ 49s] [ 49s] - (none) (none) (none) [ 49s] + 1370001600 @efe4fba - Remove placeholders and cleanup spec [ 49s] RPM meta information is different [ 49s] ... saving built packages [ 49s] /home/abuild/rpmbuild/RPMS/i686/ragel-6.6-3.1.i686.rpm [ 49s] /home/abuild/rpmbuild/RPMS/i686/ragel-debuginfo-6.6-3.1.i686.rpm [ 49s] /home/abuild/rpmbuild/RPMS/i686/ragel-debugsource-6.6-3.1.i686.rpm [ 49s] /home/abuild/rpmbuild/SRPMS/ragel-6.6-3.1.src.rpm [ 49s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 49s] [ 49s] w06 finished "build ragel.spec" at Sat Jun 1 02:48:50 UTC 2013. [ 49s] [ 52s] [ 42.850283] SysRq : Power Off [ 54s] [ 44.306375] Power down. [ 54s] build: extracting built packages... [ 54s] ragel-6.6-3.1.i686.rpm [ 54s] ragel-debuginfo-6.6-3.1.i686.rpm [ 54s] ragel-debugsource-6.6-3.1.i686.rpm [ 54s] ragel-6.6-3.1.src.rpm [ 54s] rpmlint.log Retried build at Wed Jun 12 14:28:47 2013 returned same result, skipped Retried build at Sat Jun 15 02:25:09 2013 returned same result, skipped Retried build at Sat Jun 15 12:28:31 2013 returned same result, skipped