[ 0s] Using BUILD_ROOT=/srv/build/root_6/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_6/root [ 0s] [ 0s] [ 0s] w12 started "build poppler.spec" at Fri Jul 26 08:45:17 UTC 2013. [ 0s] [ 0s] Building poppler for project 'Tizen:IVI:Release' repository 'standard' arch 'i586' srcmd5 '1ca5e2a4caeb0b59823284d3a1014dd0' [ 0s] [ 0s] processing specfile /srv/build/root_6/.build-srcdir/poppler.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_6/.build-srcdir/poppler.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/6/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_6/.build.rpmlist /srv/build/root_6/.build-srcdir/poppler.spec build rpmlint-Factory ... [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/34] preinstalling libmagic-data... [ 1s] [2/34] preinstalling setup... [ 1s] [3/34] preinstalling filesystem... [ 1s] [4/34] preinstalling glibc... [ 1s] [5/34] preinstalling bash... [ 1s] [6/34] preinstalling diffutils... [ 1s] [7/34] preinstalling grep... [ 1s] [8/34] preinstalling libattr... [ 1s] [9/34] preinstalling libbz2... [ 1s] [10/34] preinstalling libcap... [ 1s] [11/34] preinstalling libelf... [ 1s] [12/34] preinstalling libfreebl3... [ 1s] [13/34] preinstalling liblua... [ 1s] [14/34] preinstalling liblzma... [ 2s] [15/34] preinstalling libncurses... [ 2s] [16/34] preinstalling libpopt... [ 2s] [17/34] preinstalling libsmack... [ 2s] [18/34] preinstalling libsqlite... [ 2s] [19/34] preinstalling nspr... [ 2s] [20/34] preinstalling sed... [ 2s] [21/34] preinstalling tar... [ 2s] [22/34] preinstalling zlib... [ 2s] [23/34] preinstalling libacl... [ 2s] [24/34] preinstalling libgcc47... [ 2s] [25/34] preinstalling libreadline... [ 2s] [26/34] preinstalling smack... [ 2s] [27/34] preinstalling bzip2... [ 2s] [28/34] preinstalling libmagic... [ 2s] [29/34] preinstalling libxml2... [ 2s] [30/34] preinstalling coreutils... [ 2s] [31/34] preinstalling nss... [ 2s] [32/34] preinstalling libsoftokn3... [ 2s] [33/34] preinstalling rpm... [ 2s] [34/34] preinstalling rpm-security-plugin... [ 2s] [ 2s] [1/8] preinstalling libext2fs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling perl... [ 3s] [5/8] preinstalling grep... [ 3s] [6/8] preinstalling libblkid... [ 3s] [7/8] preinstalling libmount... [ 3s] [8/8] preinstalling util-linux... [ 3s] copying packages... [ 4s] reordering...cycle: gio-branding-upstream -> libgio [ 4s] breaking dependency libgio -> gio-branding-upstream [ 4s] cycle: coreutils -> pam [ 4s] breaking dependency pam -> coreutils [ 4s] cycle: nss -> libsoftokn3 [ 4s] breaking dependency nss -> libsoftokn3 [ 4s] done [ 4s] booting kvm ... [ 4s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -net none -cpu host -kernel /srv/kernel/vmlinuz -initrd /srv/kernel/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm -m 8192 -drive file=/srv/build/root_6/root,if=virtio,cache=unsafe -drive file=/srv/build/root_6/root,if=ide,index=0,cache=unsafe -drive file=/srv/build/root_6/swap,if=virtio,cache=unsafe -smp 4 [ 5s]  [ 5s] Google, Inc. [ 5s] Serial Graphics Adapter 09/05/12 [ 5s] SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (abuild@build24) Wed Sep 5 14:01:11 UTC 2012 [ 5s] 4 0 [ 5s]  SeaBIOS (version 1.6.3-20120905_140109) [ 5s] [ 6s] Booting from ROM... [ 8s] doing fast boot [ 8s] Creating device nodes with udev [ 8s] udevd[210]: failed to execute '/etc/sysconfig/network/scripts/ifup-sysctl' '/etc/sysconfig/network/scripts/ifup-sysctl lo -o hotplug': No such file or directory [ 8s] [ 9s] Waiting for device /dev/vda to appear: ok [ 9s] fsck from util-linux 2.20.1 [ 9s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 9s] /dev/vda: clean, 5338/2097152 files, 188063/8388608 blocks [ 9s] fsck succeeded. Mounting root device read-write. [ 9s] Mounting root /dev/vda [ 9s] mount -o rw,noatime,acl,user_xattr -t ext4 /dev/vda /root [ 9s] replacing /etc/mtab with symlink to /proc/self/mounts [ 9s] sh: /sbin/modprobe: No such file or directory [ 9s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 8: interpreter '/usr/bin/qemu-arm-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 9: interpreter '/usr/bin/qemu-armeb-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 10: interpreter '/usr/bin/qemu-ppc-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 11: interpreter '/usr/bin/qemu-mips-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 12: interpreter '/usr/bin/qemu-mipsel-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 18: interpreter '/usr/bin/qemu-sh4-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 19: interpreter '/usr/bin/qemu-sh4eb-binfmt' not found, ignoring [ 9s] 2nd stage started in virtual machine [ 9s] machine type: x86_64 [ 9s] switching personality to 8... [ 9s] 2nd stage started in virtual machine [ 9s] machine type: i686 [ 9s] [ 1.821103] EXT4-fs (vda): Cannot change data mode on remount [ 9s] mount: / not mounted or bad option [ 9s] In some cases useful info is found in syslog - try [ 9s] dmesg | tail or so [ 9s] swapon /dev/vdb [ 9s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 9s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 9s] *********************************** [ 9s] VM_TYPE: kvm script: /.build/build [ 9s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 9s] mount: none is already mounted or /proc busy [ 9s] mount: none is already mounted or /dev/pts busy [ 9s] logging output to //.build.log... [ 9s] processing specfile /.build-srcdir/poppler.spec ... [ 9s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/poppler.spec build rpmlint-Factory ... [ 9s] running setup postinstall script [ 9s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 9s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 9s] initializing rpm db... [ 9s] [1/203] installing libX11-data-1.5.0-1.6 [ 10s] [2/203] installing libmagic-data-5.11-1.9 [ 10s] [3/203] installing setup-0.9-3.4 [ 10s] [4/203] installing terminfo-base-5.9-1.7 [ 10s] [5/203] installing filesystem-3.1-2.4 [ 10s] error: Failed to set SMACK64 _ for /proc: Operation not supported [ 10s] [6/203] installing glibc-2.17-1.21 [ 10s] [7/203] installing bash-4.2-1.8 [ 10s] [8/203] installing cpio-2.11-3.6 [ 11s] [9/203] installing diffutils-3.2-1.7 [ 11s] [10/203] installing findutils-4.5.10-1.9 [ 11s] [11/203] installing hostname-3.12-1.6 [ 11s] [12/203] installing libXau-1.0.7-1.6 [ 11s] [13/203] installing libattr-2.4.46-1.9 [ 11s] [14/203] installing libbz2-1.0.6-1.21 [ 11s] [15/203] installing libcap-2.22-1.22 [ 11s] [16/203] installing libcms2-2.4-1.7 [ 11s] [17/203] installing libdbus-1.6.12-1.7 [ 11s] [18/203] installing libdrm-2.4.45-4.5 [ 11s] [19/203] installing libelf-0.155-1.6 [ 11s] [20/203] installing libelf0-0.8.13-1.6 [ 11s] [21/203] installing libexpat-2.1.0-1.10 [ 11s] [22/203] installing libext2fs-1.42.6-1.7 [ 11s] [23/203] installing libfreebl3-3.13.6-1.43 [ 11s] [24/203] installing libgdbm-1.10-1.8 [ 11s] [25/203] installing libgmp-5.0.5-1.9 [ 11s] [26/203] installing libgpg-error-1.10-1.6 [ 11s] [27/203] installing libjpeg-8.0.2-1.6 [ 11s] [28/203] installing libltdl-2.4.2-1.6 [ 11s] [29/203] installing liblua-5.1.4-1.8 [ 11s] [30/203] installing liblzma-5.0.3-2.6 [ 12s] [31/203] installing libpcre-8.31-1.6 [ 12s] [32/203] installing libpopt-1.16-1.7 [ 12s] [33/203] installing libpython-2.7.3-1.9 [ 12s] [34/203] installing libsmack-1.0-1.3 [ 12s] [35/203] installing libsqlite-3.7.14-1.6 [ 12s] [36/203] installing libuuid-2.22.2-1.14 [ 12s] [37/203] installing m4-1.4.16-1.6 [ 12s] [38/203] installing mesa-libglapi-9.1.3-1.1 [ 12s] [39/203] installing net-tools-2.0_20121208git-1.7 [ 12s] [40/203] installing nspr-4.9.2-1.10 [ 12s] [41/203] installing patch-2.7-1.11 [ 12s] [42/203] installing pixman-0.28.2-1.6 [ 12s] [43/203] installing pkg-config-0.28-1.7 [ 12s] [44/203] installing sed-4.2.1-1.6 [ 12s] [45/203] installing tar-1.26-2.8 [ 12s] [46/203] installing update-alternatives-1.16.3-1.5 [ 12s] [47/203] installing which-2.20-4.6 [ 12s] [48/203] installing zlib-1.2.7-1.8 [ 12s] [49/203] installing libncurses-5.9-1.7 [ 13s] [50/203] installing build-compare-2012.01.26-1.14 [ 13s] [51/203] installing damageproto-1.2.1-1.7 [ 13s] [52/203] installing kbproto-1.0.6-1.7 [ 13s] [53/203] installing libjpeg-devel-8.0.2-1.6 [ 13s] [54/203] installing libpthread-stubs-0.3-2.6 [ 13s] [55/203] installing renderproto-0.11.1-1.7 [ 13s] [56/203] installing util-macros-1.17-1.7 [ 13s] [57/203] installing xextproto-7.2.1-1.7 [ 13s] [58/203] installing xf86vidmodeproto-2.3.1-1.7 [ 13s] [59/203] installing xproto-7.0.23-1.7 [ 13s] [60/203] installing gawk-4.0.1-1.9 [ 13s] [61/203] installing grep-2.14-1.6 [ 13s] [62/203] installing less-451-5.7 [ 13s] [63/203] installing libacl-2.2.51-1.3 [ 13s] [64/203] installing libasm-0.155-1.6 [ 14s] [65/203] installing libblkid-2.22.2-1.14 [ 14s] [66/203] installing libffi47-4.7.2-1.4 [ 14s] [67/203] installing libfreetype-2.4.9-1.6 [ 14s] [68/203] installing libgcc47-4.7.2-1.30 [ 14s] [69/203] installing libgcrypt-1.5.0-1.6 [ 14s] [70/203] installing libglib-2.36.1-1.7 [ 14s] [71/203] installing libgomp47-4.7.2-1.30 [ 14s] [72/203] installing libkms-2.4.45-4.5 [ 14s] [73/203] installing libmpfr-3.1.1-1.8 [ 14s] [74/203] installing libopenssl-1.0.1c-1.9 [ 14s] [75/203] installing libpciaccess-0.13.1-1.7 [ 14s] [76/203] installing libpcreposix-8.31-1.6 [ 14s] [77/203] installing libpng-1.2.50-1.6 [ 14s] [78/203] installing libreadline-5.2-1.10 [ 14s] [79/203] installing libxcb-1.9-1.6 [ 14s] [80/203] installing make-3.82-1.4 [ 14s] [81/203] installing nss-certs-3.13.6-1.43 [ 14s] [82/203] installing pixman-devel-0.28.2-1.6 [ 15s] [83/203] installing smack-1.0-1.3 [ 15s] [84/203] installing bzip2-1.0.6-1.21 [ 15s] [85/203] installing libmagic-5.11-1.9 [ 15s] [86/203] installing libxml2-2.8.0-1.6 [ 15s] [87/203] installing xz-5.0.3-2.6 [ 15s] [88/203] installing binutils-2.23.1-2.2 [ 17s] update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode. [ 17s] [89/203] installing libdw-0.155-1.6 [ 17s] [90/203] installing file-5.11-1.9 [ 17s] [91/203] installing fixesproto-5.0-1.7 [ 17s] [92/203] installing libwayland-client-1.2.0-1.5 [ 17s] [93/203] installing libwayland-server-1.2.0-1.5 [ 17s] [94/203] installing libxcb-composite-1.9-1.6 [ 17s] [95/203] installing libxcb-damage-1.9-1.6 [ 17s] [96/203] installing libxcb-dpms-1.9-1.6 [ 17s] [97/203] installing libxcb-dri2-1.9-1.6 [ 17s] [98/203] installing libxcb-glx-1.9-1.6 [ 17s] [99/203] installing libxcb-randr-1.9-1.6 [ 17s] [100/203] installing libxcb-record-1.9-1.6 [ 17s] [101/203] installing libxcb-render-1.9-1.6 [ 17s] [102/203] installing libxcb-res-1.9-1.6 [ 18s] [103/203] installing libxcb-screensaver-1.9-1.6 [ 18s] [104/203] installing libxcb-shape-1.9-1.6 [ 18s] [105/203] installing libxcb-shm-1.9-1.6 [ 18s] [106/203] installing libxcb-sync-1.9-1.6 [ 18s] [107/203] installing libxcb-xevie-1.9-1.6 [ 18s] [108/203] installing libxcb-xf86dri-1.9-1.6 [ 18s] [109/203] installing libxcb-xfixes-1.9-1.6 [ 18s] [110/203] installing libxcb-xinerama-1.9-1.6 [ 18s] [111/203] installing libxcb-xprint-1.9-1.6 [ 18s] [112/203] installing libxcb-xtest-1.9-1.6 [ 18s] [113/203] installing libxcb-xv-1.9-1.6 [ 18s] [114/203] installing libxcb-xvmc-1.9-1.6 [ 18s] [115/203] installing desktop-file-utils-0.20-1.6 [ 18s] [116/203] installing libX11-1.5.0-1.6 [ 18s] [117/203] installing libXau-devel-1.0.7-1.6 [ 18s] [118/203] installing libdrm-intel-2.4.45-4.5 [ 18s] [119/203] installing libgmodule-2.36.1-1.7 [ 18s] [120/203] installing libgthread-2.36.1-1.7 [ 18s] [121/203] installing libmount-2.22.2-1.14 [ 18s] [122/203] installing libmpc-1.0-1.8 [ 18s] [123/203] installing libstdc++47-4.7.2-1.30 [ 18s] [124/203] installing libgobject-2.36.1-1.7 [ 19s] [125/203] installing libXdamage-1.1.3-3.6 [ 19s] [126/203] installing libXext-1.3.1-1.6 [ 19s] [127/203] installing libXfixes-5.0-2.6 [ 19s] [128/203] installing libXrender-0.9.7-1.7 [ 19s] [129/203] installing update-desktop-files-12.1-1.6 [ 19s] [130/203] installing db4-4.8.30.NC-1.10 [ 19s] [131/203] installing gettext-runtime-0.18.1.1-2.6 [ 19s] [132/203] installing libX11-xcb-1.5.0-1.6 [ 19s] [133/203] installing libgmpxx-5.0.5-1.9 [ 19s] [134/203] installing libpcrecpp-8.31-1.6 [ 19s] [135/203] installing elfutils-0.155-1.6 [ 19s] [136/203] installing libtiff-4.0.2-1.7 [ 19s] [137/203] installing mesa-9.1.3-1.1 [ 20s] [138/203] installing libxcb-devel-1.9-1.6 [ 20s] [139/203] installing libXxf86vm-1.1.2-1.6 [ 21s] [140/203] installing libppl-0.11.2-1.14 [ 21s] [141/203] installing perl-5.16.3-1.17 [ 30s] [142/203] installing libX11-devel-1.5.0-1.6 [ 30s] [143/203] installing python-2.7.3-1.9 [ 32s] [144/203] installing build-mkbaselibs-20120927-1.6 [ 32s] [145/203] installing autoconf-2.69-1.10 [ 32s] [146/203] installing python-xml-2.7.3-1.9 [ 32s] [147/203] installing gettext-tools-0.18.1.1-2.6 [ 33s] [148/203] installing libXext-devel-1.3.1-1.6 [ 33s] [149/203] installing libXfixes-devel-5.0-2.6 [ 33s] [150/203] installing libXrender-devel-0.9.7-1.7 [ 33s] [151/203] installing libppl_c-0.11.2-1.14 [ 33s] [152/203] installing mesa-libGL-9.1.3-1.1 [ 33s] [153/203] installing libcloog-0.15.10-1.10 [ 33s] [154/203] installing build-20120927-1.6 [ 34s] [155/203] installing libXxf86vm-devel-1.1.2-1.6 [ 34s] [156/203] installing libXdamage-devel-1.1.3-3.6 [ 34s] [157/203] installing cpp47-4.7.2-1.30 [ 34s] [158/203] installing cpp-4.7-1.9 [ 34s] [159/203] installing pam-1.1.6-1.10 [ 34s] [160/203] installing nss-3.13.6-1.43 [ 34s] [161/203] installing libsoftokn3-3.13.6-1.43 [ 34s] [162/203] installing coreutils-8.21-1.6 [ 35s] [163/203] installing libsystemd-204-1.4 [ 35s] [164/203] installing util-linux-2.22.2-1.14 [ 35s] [165/203] installing rpm-4.11.0.1-1.5 [ 35s] [166/203] installing linux-glibc-devel-3.4.0-1.8 [ 37s] [167/203] installing gzip-1.5-1.7 [ 37s] [168/203] installing libgbm-0.0.0-1.1 [ 37s] [169/203] installing automake-1.12.1-1.9 [ 37s] [170/203] installing tzdata-2012e-1.5 [ 38s] [171/203] installing fontconfig-2.10.91-1.8 [ 40s] [172/203] installing shared-mime-info-1.0-1.6 [ 40s] [173/203] installing rpmlint-mini-1.4-1.13 [ 41s] [174/203] installing rpm-security-plugin-4.11.0.1-1.5 [ 41s] warning: /etc/device-sec-policy created as /etc/device-sec-policy.rpmnew [ 41s] [175/203] installing rpmlint-tizen-1.0-1.3 [ 41s] [176/203] installing glibc-devel-2.17-1.21 [ 42s] [177/203] installing libtool-2.4.2-1.6 [ 42s] [178/203] installing libdrm-devel-2.4.45-4.5 [ 42s] [179/203] installing libgio-2.36.1-1.7 [ 42s] [180/203] installing mesa-libEGL-9.1.3-1.1 [ 42s] [181/203] installing gio-branding-upstream-2.36.1-1.7 [ 42s] [182/203] installing libstdc++47-devel-4.7.2-1.30 [ 45s] [183/203] installing liblcms2-devel-2.4-1.7 [ 45s] [184/203] installing zlib-devel-1.2.7-1.8 [ 45s] [185/203] installing glib2-tools-2.36.1-1.7 [ 45s] [186/203] installing mesa-libEGL-devel-9.1.3-1.1 [ 45s] [187/203] installing mesa-libGL-devel-9.1.3-1.1 [ 45s] [188/203] installing gcc47-4.7.2-1.30 [ 46s] [189/203] installing libcairo-1.12.14-1.12 [ 46s] [190/203] installing libstdc++-devel-4.7-1.9 [ 46s] [191/203] installing gcc-4.7-1.9 [ 46s] [192/203] installing freetype2-devel-2.4.9-1.6 [ 46s] [193/203] installing libpng-devel-1.2.50-1.6 [ 46s] [194/203] installing gcc47-c++-4.7.2-1.30 [ 47s] [195/203] installing libcairo-script-interpreter-1.12.14-1.12 [ 47s] [196/203] installing libcairo-gobject-1.12.14-1.12 [ 47s] [197/203] installing gcc-c++-4.7-1.9 [ 47s] [198/203] installing fontconfig-devel-2.10.91-1.8 [ 47s] [199/203] installing libtiff-devel-4.0.2-1.7 [ 47s] [200/203] installing pcre-devel-8.31-1.6 [ 47s] [201/203] installing rpm-build-4.11.0.1-1.5 [ 47s] [202/203] installing glib2-devel-2.36.1-1.7 [ 48s] [203/203] installing cairo-devel-1.12.14-1.12 [ 48s] removing nis flags from //etc/nsswitch.conf... [ 48s] now finalizing build dir... [ 49s] build target is i686-tizen-linux [ 49s] ----------------------------------------------------------------- [ 49s] I have the following modifications for poppler.spec: [ 49s] 7c7 [ 49s] < Release: 1 [ 49s] --- [ 49s] > Release: 1.10 [ 49s] 200a201 [ 49s] > %changelog [ 49s] ----------------------------------------------------------------- [ 49s] ----- building poppler.spec (user abuild) [ 49s] ----------------------------------------------------------------- [ 49s] ----------------------------------------------------------------- [ 49s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:IVI:Release/standard/1ca5e2a4caeb0b59823284d3a1014dd0-poppler' /home/abuild/rpmbuild/SOURCES/poppler.spec [ 49s] Building target platforms: i686-tizen-linux [ 49s] Building for target i686-tizen-linux [ 49s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.1EU6R6 [ 49s] + umask 022 [ 49s] + cd /home/abuild/rpmbuild/BUILD [ 49s] + cd /home/abuild/rpmbuild/BUILD [ 49s] + rm -rf poppler-0.22.1 [ 49s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/poppler-0.22.1.tar.gz [ 49s] + /bin/tar -xf - [ 49s] + STATUS=0 [ 49s] + '[' 0 -ne 0 ']' [ 49s] + cd poppler-0.22.1 [ 49s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 49s] + cp /home/abuild/rpmbuild/SOURCES/poppler.manifest . [ 49s] + exit 0 [ 49s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.tRTOBO [ 49s] + umask 022 [ 49s] + cd /home/abuild/rpmbuild/BUILD [ 49s] + cd poppler-0.22.1 [ 49s] + LANG=C [ 49s] + export LANG [ 49s] + unset DISPLAY [ 49s] + CFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [ 49s] + export CFLAGS [ 49s] + CXXFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [ 49s] + export CXXFLAGS [ 49s] + FFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -I%_fmoddir' [ 49s] + export FFLAGS [ 49s] + LD_AS_NEEDED=1 [ 49s] + export LD_AS_NEEDED [ 49s] + autoreconf -fi [ 53s] libtoolize: putting auxiliary files in `.'. [ 53s] libtoolize: copying file `./ltmain.sh' [ 53s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 53s] libtoolize: copying file `m4/libtool.m4' [ 53s] libtoolize: copying file `m4/ltoptions.m4' [ 53s] libtoolize: copying file `m4/ltsugar.m4' [ 53s] libtoolize: copying file `m4/ltversion.m4' [ 53s] libtoolize: copying file `m4/lt~obsolete.m4' [ 58s] + CFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [ 58s] + export CFLAGS [ 58s] + CXXFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [ 58s] + export CXXFLAGS [ 58s] + FFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -I%_fmoddir' [ 58s] + export FFLAGS [ 58s] + ./configure --build=i686-tizen-linux-gnu --host=i686-tizen-linux-gnu --target=i686-tizen-linux --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --enable-xpdf-headers --disable-static --enable-shared --enable-zlib --disable-gtk-test [ 58s] checking for a BSD-compatible install... /bin/install -c [ 58s] checking whether build environment is sane... yes [ 58s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 58s] checking for gawk... gawk [ 58s] checking whether make sets $(MAKE)... yes [ 58s] checking whether make supports nested variables... yes [ 58s] checking for style of include used by make... GNU [ 58s] checking for i686-tizen-linux-gnu-gcc... no [ 58s] checking for gcc... gcc [ 58s] checking whether the C compiler works... yes [ 58s] checking for C compiler default output file name... a.out [ 58s] checking for suffix of executables... [ 58s] checking whether we are cross compiling... no [ 58s] checking for suffix of object files... o [ 59s] checking whether we are using the GNU C compiler... yes [ 59s] checking whether gcc accepts -g... yes [ 59s] checking for gcc option to accept ISO C89... none needed [ 59s] checking dependency style of gcc... gcc3 [ 59s] checking how to run the C preprocessor... gcc -E [ 59s] checking for grep that handles long lines and -e... /bin/grep [ 59s] checking for egrep... /bin/grep -E [ 59s] checking for ANSI C header files... yes [ 59s] checking for sys/types.h... yes [ 59s] checking for sys/stat.h... yes [ 59s] checking for stdlib.h... yes [ 59s] checking for string.h... yes [ 59s] checking for memory.h... yes [ 59s] checking for strings.h... yes [ 59s] checking for inttypes.h... yes [ 59s] checking for stdint.h... yes [ 59s] checking for unistd.h... yes [ 59s] checking whether byte ordering is bigendian... no [ 59s] checking build system type... i686-tizen-linux-gnu [ 59s] checking host system type... i686-tizen-linux-gnu [ 59s] checking how to print strings... printf [ 59s] checking for a sed that does not truncate output... /bin/sed [ 59s] checking for fgrep... /bin/grep -F [ 59s] checking for ld used by gcc... /usr/i586-tizen-linux/bin/ld [ 59s] checking if the linker (/usr/i586-tizen-linux/bin/ld) is GNU ld... yes [ 59s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 59s] checking the name lister (/bin/nm -B) interface... BSD nm [ 59s] checking whether ln -s works... yes [ 59s] checking the maximum length of command line arguments... 1572864 [ 59s] checking whether the shell understands some XSI constructs... yes [ 59s] checking whether the shell understands "+="... yes [ 59s] checking how to convert i686-tizen-linux-gnu file names to i686-tizen-linux-gnu format... func_convert_file_noop [ 59s] checking how to convert i686-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 59s] checking for /usr/i586-tizen-linux/bin/ld option to reload object files... -r [ 59s] checking for i686-tizen-linux-gnu-objdump... objdump [ 59s] checking how to recognize dependent libraries... pass_all [ 59s] checking for i686-tizen-linux-gnu-dlltool... dlltool [ 59s] checking how to associate runtime and link libraries... printf %s\n [ 59s] checking for i686-tizen-linux-gnu-ar... no [ 59s] checking for ar... ar [ 59s] checking for archiver @FILE support... @ [ 59s] checking for i686-tizen-linux-gnu-strip... no [ 59s] checking for strip... strip [ 59s] checking for i686-tizen-linux-gnu-ranlib... no [ 59s] checking for ranlib... ranlib [ 59s] checking command to parse /bin/nm -B output from gcc object... ok [ 59s] checking for sysroot... no [ 59s] checking for i686-tizen-linux-gnu-mt... no [ 59s] checking for mt... no [ 59s] checking if : is a manifest tool... no [ 59s] checking for dlfcn.h... yes [ 59s] checking for objdir... .libs [ 59s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 59s] checking for gcc option to produce PIC... -fPIC -DPIC [ 59s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 59s] checking if gcc static flag -static works... no [ 60s] checking if gcc supports -c -o file.o... yes [ 60s] checking if gcc supports -c -o file.o... (cached) yes [ 60s] checking whether the gcc linker (/usr/i586-tizen-linux/bin/ld) supports shared libraries... yes [ 60s] checking whether -lc should be explicitly linked in... no [ 60s] checking dynamic linker characteristics... GNU/Linux ld.so [ 60s] checking how to hardcode library paths into programs... immediate [ 60s] checking whether stripping libraries is possible... yes [ 60s] checking if libtool supports shared libraries... yes [ 60s] checking whether to build shared libraries... yes [ 60s] checking whether to build static libraries... no [ 60s] checking for i686-tizen-linux-gnu-gcc... gcc [ 60s] checking whether we are using the GNU C compiler... (cached) yes [ 60s] checking whether gcc accepts -g... (cached) yes [ 60s] checking for gcc option to accept ISO C89... (cached) none needed [ 60s] checking dependency style of gcc... (cached) gcc3 [ 60s] checking for i686-tizen-linux-gnu-g++... no [ 60s] checking for i686-tizen-linux-gnu-c++... no [ 60s] checking for i686-tizen-linux-gnu-gpp... no [ 60s] checking for i686-tizen-linux-gnu-aCC... no [ 60s] checking for i686-tizen-linux-gnu-CC... no [ 60s] checking for i686-tizen-linux-gnu-cxx... no [ 60s] checking for i686-tizen-linux-gnu-cc++... no [ 60s] checking for i686-tizen-linux-gnu-cl.exe... no [ 60s] checking for i686-tizen-linux-gnu-FCC... no [ 60s] checking for i686-tizen-linux-gnu-KCC... no [ 60s] checking for i686-tizen-linux-gnu-RCC... no [ 60s] checking for i686-tizen-linux-gnu-xlC_r... no [ 60s] checking for i686-tizen-linux-gnu-xlC... no [ 60s] checking for g++... g++ [ 60s] checking whether we are using the GNU C++ compiler... yes [ 60s] checking whether g++ accepts -g... yes [ 60s] checking dependency style of g++... gcc3 [ 60s] checking how to run the C++ preprocessor... g++ -E [ 60s] checking for ld used by g++... /usr/i586-tizen-linux/bin/ld [ 60s] checking if the linker (/usr/i586-tizen-linux/bin/ld) is GNU ld... yes [ 60s] checking whether the g++ linker (/usr/i586-tizen-linux/bin/ld) supports shared libraries... yes [ 60s] checking for g++ option to produce PIC... -fPIC -DPIC [ 60s] checking if g++ PIC flag -fPIC -DPIC works... yes [ 60s] checking if g++ static flag -static works... no [ 60s] checking if g++ supports -c -o file.o... yes [ 60s] checking if g++ supports -c -o file.o... (cached) yes [ 60s] checking whether the g++ linker (/usr/i586-tizen-linux/bin/ld) supports shared libraries... yes [ 60s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 60s] checking how to hardcode library paths into programs... immediate [ 60s] checking for library containing strerror... none required [ 60s] checking for gcc option to accept ISO C99... -std=gnu99 [ 60s] checking for gcc -std=gnu99 option to accept ISO Standard C... (cached) -std=gnu99 [ 60s] checking whether we are using the GNU C++ compiler... (cached) yes [ 60s] checking whether g++ accepts -g... (cached) yes [ 60s] checking dependency style of g++... (cached) gcc3 [ 60s] checking for i686-tizen-linux-gnu-pkg-config... /bin/i686-tizen-linux-gnu-pkg-config [ 60s] checking pkg-config is at least version 0.9.0... yes [ 60s] checking for the pthreads library -lpthreads... no [ 60s] checking whether pthreads work without any flags... no [ 60s] checking whether pthreads work with -Kthread... no [ 60s] checking whether pthreads work with -kthread... no [ 60s] checking for the pthreads library -llthread... no [ 60s] checking whether pthreads work with -pthread... yes [ 60s] checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE [ 60s] checking if more special flags are required for pthreads... no [ 60s] checking for X... libraries , headers [ 61s] checking for gethostbyname... yes [ 61s] checking for connect... yes [ 61s] checking for remove... yes [ 61s] checking for shmat... yes [ 61s] checking for IceConnectionNumber in -lICE... no [ 61s] checking for dirent.h that defines DIR... yes [ 61s] checking for library containing opendir... none required [ 61s] checking for stdint.h... (cached) yes [ 61s] checking whether gettimeofday is declared... yes [ 61s] checking for gettimeofday... yes [ 61s] checking for localtime_r... yes [ 61s] checking for gmtime_r... yes [ 61s] checking for rand_r... yes [ 61s] checking for gethostbyname... (cached) yes [ 61s] checking for nanosleep... yes [ 61s] checking for LIBOPENJPEG... no [ 61s] checking for opj_cio_open in -lopenjpeg... no [ 61s] checking openjpeg.h usability... no [ 61s] checking openjpeg.h presence... no [ 61s] checking for openjpeg.h... no [ 61s] checking for TIFFOpen in -ltiff... yes [ 61s] checking tiffio.h usability... yes [ 61s] checking tiffio.h presence... yes [ 61s] checking for tiffio.h... yes [ 61s] checking for popen... yes [ 61s] checking for mkstemp... yes [ 61s] checking for mkstemps... yes [ 61s] checking for special C compiler options needed for large files... no [ 61s] checking for _FILE_OFFSET_BITS value needed for large files... 64 [ 62s] checking for _LARGEFILE_SOURCE value needed for large files... no [ 62s] checking for fseek64... no [ 62s] checking for ftell64... no [ 62s] checking for inflate in -lz... yes [ 62s] checking zlib.h usability... yes [ 62s] checking zlib.h presence... yes [ 62s] checking for zlib.h... yes [ 62s] checking for libjpeg6b... no [ 62s] checking for libjpeg... -ljpeg [ 62s] checking jpeglib.h usability... yes [ 62s] checking jpeglib.h presence... yes [ 62s] checking for jpeglib.h... yes [ 62s] checking libjpeg.h works correctly... ok [ 62s] checking for LIBPNG... yes [ 62s] checking for FREETYPE... yes [ 62s] checking which font configuration to use... fontconfig [ 62s] checking for FONTCONFIG... yes [ 62s] checking for CAIRO... yes [ 62s] checking for PDFTOCAIRO... yes [ 62s] checking fcntl.h usability... yes [ 62s] checking fcntl.h presence... yes [ 62s] checking for fcntl.h... yes [ 62s] checking sys/mman.h usability... yes [ 62s] checking sys/mman.h presence... yes [ 62s] checking for sys/mman.h... yes [ 62s] checking for sys/stat.h... (cached) yes [ 62s] checking for POPPLER_GLIB... yes [ 62s] checking for gobject-introspection... no [ 62s] checking for glib-mkenums... /bin/glib-mkenums [ 62s] checking for gtkdoc-check... no [ 62s] checking for gtkdoc-rebase... no [ 62s] checking for gtkdoc-mkpdf... no [ 62s] checking whether to build gtk-doc documentation... no [ 62s] checking for POPPLER_QT4... no [ 62s] checking for iconv... yes [ 62s] checking for working iconv... no [ 62s] checking for iconv declaration... [ 62s] extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); [ 62s] checking for LCMS... yes [ 62s] checking for test data in /home/abuild/rpmbuild/BUILD/poppler-0.22.1/./../test... no [ 62s] configure: WARNING: [ 62s] No test data found in /home/abuild/rpmbuild/BUILD/poppler-0.22.1/./../test. [ 62s] You will not be able to run 'make check' successfully. [ 62s] [ 62s] The test data is not included in the source packages [ 62s] and is also not part of the main git repository. Instead, [ 62s] you can checkout the test data from its own git [ 62s] repository with: [ 62s] [ 62s] git clone git://git.freedesktop.org/git/poppler/test [ 62s] [ 62s] You should checkout the test data as a sibling of your [ 62s] poppler source folder or specify the location of your [ 62s] checkout with --with-testdatadir=/path/to/checkoutdir/test. [ 62s] [ 62s] checking that generated files are newer than configure... done [ 62s] configure: creating ./config.status [ 63s] config.status: creating Makefile [ 63s] config.status: creating goo/Makefile [ 63s] config.status: creating fofi/Makefile [ 63s] config.status: creating splash/Makefile [ 63s] config.status: creating poppler/Makefile [ 63s] config.status: creating utils/Makefile [ 63s] config.status: creating glib/Makefile [ 63s] config.status: creating glib/poppler-features.h [ 63s] config.status: creating glib/reference/Makefile [ 63s] config.status: creating glib/reference/version.xml [ 63s] config.status: creating glib/demo/Makefile [ 63s] config.status: creating test/Makefile [ 63s] config.status: creating qt4/Makefile [ 63s] config.status: creating qt4/src/Makefile [ 63s] config.status: creating qt4/tests/Makefile [ 63s] config.status: creating qt4/demos/Makefile [ 63s] config.status: creating cpp/Makefile [ 63s] config.status: creating cpp/poppler-version.h [ 63s] config.status: creating cpp/tests/Makefile [ 63s] config.status: creating poppler.pc [ 63s] config.status: creating poppler-uninstalled.pc [ 63s] config.status: creating poppler-cairo.pc [ 63s] config.status: creating poppler-cairo-uninstalled.pc [ 63s] config.status: creating poppler-splash.pc [ 63s] config.status: creating poppler-splash-uninstalled.pc [ 63s] config.status: creating poppler-glib.pc [ 63s] config.status: creating poppler-glib-uninstalled.pc [ 63s] config.status: creating poppler-qt4.pc [ 63s] config.status: creating poppler-qt4-uninstalled.pc [ 63s] config.status: creating poppler-cpp.pc [ 63s] config.status: creating poppler-cpp-uninstalled.pc [ 63s] config.status: creating config.h [ 63s] config.status: creating poppler/poppler-config.h [ 63s] config.status: executing depfiles commands [ 64s] config.status: executing libtool commands [ 64s] [ 64s] Building poppler with support for: [ 64s] font configuration: fontconfig [ 64s] splash output: yes [ 64s] cairo output: yes [ 64s] qt4 wrapper: no [ 64s] glib wrapper: yes [ 64s] introspection: no [ 64s] cpp wrapper: no [ 64s] use gtk-doc: no [ 64s] use libjpeg: yes [ 64s] use libpng: yes [ 64s] use libtiff: yes [ 64s] use zlib: yes [ 64s] use libcurl: no [ 64s] use libopenjpeg: no [ 64s] use cms: yes [ 64s] with lcms2 [ 64s] command line utils: yes [ 64s] test data dir: /home/abuild/rpmbuild/BUILD/poppler-0.22.1/./../test [ 64s] [ 64s] Warning: Using zlib is not totally safe [ 64s] Warning: Using libopenjpeg is recommended [ 64s] + make -j4 [ 64s] make all-recursive [ 64s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1' [ 64s] Making all in goo [ 64s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/goo' [ 64s] CXX gfile.lo [ 64s] CXX gmempp.lo [ 64s] CXX GooHash.lo [ 64s] CXX GooList.lo [ 64s] CXX GooTimer.lo [ 64s] CXX GooString.lo [ 64s] CXX gmem.lo [ 64s] CXX FixedPoint.lo [ 64s] CXX PNGWriter.lo [ 64s] CXX JpegWriter.lo [ 64s] CXX TiffWriter.lo [ 64s] CXX ImgWriter.lo [ 64s] CXX gstrtod.lo [ 64s] CXX grandom.lo [ 64s] CXXLD libgoo.la [ 64s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/goo' [ 64s] Making all in fofi [ 64s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/fofi' [ 64s] CXX FoFiBase.lo [ 64s] CXX FoFiEncodings.lo [ 64s] CXX FoFiType1.lo [ 64s] CXX FoFiTrueType.lo [ 64s] CXX FoFiType1C.lo [ 64s] CXX FoFiIdentifier.lo [ 65s] CXXLD libfofi.la [ 66s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/fofi' [ 66s] Making all in splash [ 66s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/splash' [ 66s] CXX Splash.lo [ 66s] CXX SplashBitmap.lo [ 66s] CXX SplashClip.lo [ 66s] CXX SplashFTFont.lo [ 66s] CXX SplashFTFontEngine.lo [ 66s] CXX SplashFTFontFile.lo [ 66s] CXX SplashFont.lo [ 66s] CXX SplashFontEngine.lo [ 66s] CXX SplashFontFile.lo [ 66s] CXX SplashFontFileID.lo [ 66s] CXX SplashPattern.lo [ 66s] CXX SplashPath.lo [ 66s] CXX SplashScreen.lo [ 66s] CXX SplashState.lo [ 66s] CXX SplashT1Font.lo [ 66s] CXX SplashT1FontEngine.lo [ 66s] CXX SplashT1FontFile.lo [ 66s] CXX SplashXPath.lo [ 67s] CXX SplashXPathScanner.lo [ 68s] CXXLD libsplash.la [ 68s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/splash' [ 68s] Making all in poppler [ 68s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/poppler' [ 68s] (CDPATH="${ZSH_VERSION+.}:" && cd .. && /bin/sh /home/abuild/rpmbuild/BUILD/poppler-0.22.1/missing --run autoheader) [ 69s] rm -f stamp-h2 [ 69s] touch poppler-config.h.in [ 69s] cd .. && /bin/sh ./config.status poppler/poppler-config.h [ 69s] config.status: creating poppler/poppler-config.h [ 69s] config.status: poppler/poppler-config.h is unchanged [ 69s] make all-am [ 69s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/poppler' [ 69s] CXX SplashOutputDev.lo [ 69s] CXX DCTStream.lo [ 69s] CXX FlateStream.lo [ 69s] CXX JPXStream.lo [ 69s] CXX Annot.lo [ 69s] CXX Array.lo [ 70s] CXX BuiltinFont.lo [ 70s] CXX BuiltinFontTables.lo [ 70s] CXX CachedFile.lo [ 70s] CXX Catalog.lo [ 71s] CXX CharCodeToUnicode.lo [ 71s] CXX CMap.lo [ 71s] CXX DateInfo.lo [ 71s] CXX Decrypt.lo [ 71s] CXX Dict.lo [ 72s] CXX Error.lo [ 72s] CXX FileSpec.lo [ 72s] CXX FontEncodingTables.lo [ 72s] CXX Form.lo [ 72s] CXX FontInfo.lo [ 72s] CXX Function.lo [ 72s] CXX Gfx.lo [ 72s] CXX GfxFont.lo [ 73s] CXX GfxState.lo [ 73s] CXX GlobalParams.lo [ 73s] CXX Hints.lo [ 74s] CXX JArithmeticDecoder.lo [ 74s] CXX JBIG2Stream.lo [ 74s] CXX Lexer.lo [ 74s] CXX Linearization.lo [ 75s] CXX Link.lo [ 75s] CXX LocalPDFDocBuilder.lo [ 75s] CXX Movie.lo [ 75s] CXX NameToCharCode.lo [ 75s] CXX Object.lo [ 75s] CXX OptionalContent.lo [ 75s] CXX Outline.lo [ 75s] CXX OutputDev.lo [ 76s] CXX Page.lo [ 76s] CXX PageTransition.lo [ 76s] CXX Parser.lo [ 76s] CXX PDFDoc.lo [ 76s] CXX PDFDocEncoding.lo [ 76s] CXX PDFDocFactory.lo [ 76s] CXX PopplerCache.lo [ 76s] CXX ProfileData.lo [ 76s] CXX PreScanOutputDev.lo [ 76s] CXX PSTokenizer.lo [ 76s] CXX Rendition.lo [ 76s] CXX StdinCachedFile.lo [ 77s] CXX StdinPDFDocBuilder.lo [ 77s] CXX Stream.lo [ 77s] CXX strtok_r.lo [ 77s] CXX UnicodeMap.lo [ 77s] CXX UnicodeTypeTable.lo [ 77s] CXX UTF.lo [ 77s] CXX ViewerPreferences.lo [ 77s] CXX XRef.lo [ 77s] CXX PSOutputDev.lo [ 77s] CXX TextOutputDev.lo [ 78s] CXX PageLabelInfo.lo [ 78s] CXX SecurityHandler.lo [ 78s] CXX Sound.lo [ 78s] CXX XpdfPluginAPI.lo [ 78s] CXX CairoFontEngine.lo [ 79s] CXX CairoOutputDev.lo [ 79s] CXX CairoRescaleBox.lo [ 80s] CXXLD libpoppler.la [ 80s] CXXLD libpoppler-cairo.la [ 80s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/poppler' [ 80s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/poppler' [ 80s] Making all in utils [ 80s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/utils' [ 80s] CXX pdfdetach.o [ 80s] CXX parseargs.o [ 80s] CXX pdffonts.o [ 80s] CXX pdfimages.o [ 80s] CXX ImageOutputDev.o [ 81s] CXX pdfinfo.o [ 81s] CXX printencodings.o [ 81s] CXX pdftops.o [ 81s] CXX pdftotext.o [ 81s] CXX pdftohtml-pdftohtml.o [ 81s] CXX pdftohtml-HtmlFonts.o [ 81s] CXX pdftohtml-HtmlLinks.o [ 81s] CXX pdftohtml-HtmlOutputDev.o [ 81s] CXX pdftohtml-parseargs.o [ 81s] CXX pdfseparate.o [ 81s] CXX pdfunite.o [ 81s] CXX pdftoppm.o [ 81s] CXX pdftocairo.o [ 81s] CXXLD pdfdetach [ 81s] CXXLD pdffonts [ 82s] CXXLD pdfimages [ 82s] CXXLD pdfinfo [ 82s] CXXLD pdftops [ 82s] CXXLD pdftotext [ 82s] CXXLD pdfseparate [ 82s] CXXLD pdfunite [ 82s] CXXLD pdftoppm [ 82s] CXXLD pdftocairo [ 82s] CXXLD pdftohtml [ 82s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/utils' [ 82s] Making all in glib [ 82s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/glib' [ 82s] GEN stamp-poppler-enums.h [ 82s] make all-recursive [ 82s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/glib' [ 82s] Making all in . [ 82s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/glib' [ 82s] CC poppler-enums.lo [ 82s] CXX poppler-action.lo [ 82s] CXX poppler-date.lo [ 82s] CXX poppler-document.lo [ 82s] CXX poppler-page.lo [ 82s] CXX poppler-attachment.lo [ 83s] CXX poppler-form-field.lo [ 83s] CXX poppler-annot.lo [ 83s] CXX poppler-layer.lo [ 83s] CXX poppler-media.lo [ 83s] CXX poppler-movie.lo [ 84s] CXX poppler-cached-file-loader.lo [ 84s] CXX poppler-input-stream.lo [ 84s] CXX poppler.lo [ 84s] CXXLD libpoppler-glib.la [ 84s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/glib' [ 84s] Making all in reference [ 84s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/glib/reference' [ 84s] make[4]: Nothing to be done for `all'. [ 84s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/glib/reference' [ 84s] Making all in demo [ 84s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/glib/demo' [ 84s] make[4]: Nothing to be done for `all'. [ 84s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/glib/demo' [ 84s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/glib' [ 84s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/glib' [ 84s] Making all in test [ 84s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/test' [ 84s] CXX perf-test-preview-dummy.o [ 84s] CXX perf-test.o [ 84s] CXX pdf-fullrewrite.o [ 84s] CXX parseargs.o [ 84s] CXXLD pdf-fullrewrite [ 85s] CXXLD perf-test [ 85s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/test' [ 85s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1' [ 85s] make[2]: Nothing to be done for `all-am'. [ 85s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1' [ 85s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1' [ 85s] + exit 0 [ 85s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.522R6H [ 85s] + umask 022 [ 85s] + cd /home/abuild/rpmbuild/BUILD [ 85s] + cd poppler-0.22.1 [ 85s] + LANG=C [ 85s] + export LANG [ 85s] + unset DISPLAY [ 85s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386 [ 85s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386 [ 85s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386 install [ 85s] Making install in goo [ 85s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/goo' [ 85s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/goo' [ 85s] make[2]: Nothing to be done for `install-exec-am'. [ 85s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/include/poppler/goo' [ 85s] /bin/install -c -m 644 GooHash.h GooList.h GooTimer.h GooMutex.h GooString.h gtypes.h gmem.h gfile.h FixedPoint.h PNGWriter.h JpegWriter.h TiffWriter.h ImgWriter.h GooLikely.h gstrtod.h grandom.h '/home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/include/poppler/goo' [ 85s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/goo' [ 85s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/goo' [ 85s] Making install in fofi [ 85s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/fofi' [ 85s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/fofi' [ 85s] make[2]: Nothing to be done for `install-exec-am'. [ 85s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/include/poppler/fofi' [ 85s] /bin/install -c -m 644 FoFiBase.h FoFiEncodings.h FoFiTrueType.h FoFiType1.h FoFiIdentifier.h FoFiType1C.h '/home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/include/poppler/fofi' [ 85s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/fofi' [ 85s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/fofi' [ 85s] Making install in splash [ 85s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/splash' [ 85s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/splash' [ 85s] make[2]: Nothing to be done for `install-exec-am'. [ 85s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/include/poppler/splash' [ 85s] /bin/install -c -m 644 Splash.h SplashBitmap.h SplashClip.h SplashErrorCodes.h SplashFTFont.h SplashFTFontEngine.h SplashFTFontFile.h SplashFont.h SplashFontEngine.h SplashFontFile.h SplashFontFileID.h SplashGlyphBitmap.h SplashMath.h SplashPath.h SplashPattern.h SplashScreen.h SplashState.h SplashT1Font.h SplashT1FontEngine.h SplashT1FontFile.h SplashTypes.h SplashXPath.h SplashXPathScanner.h '/home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/include/poppler/splash' [ 85s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/splash' [ 85s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/splash' [ 85s] Making install in poppler [ 85s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/poppler' [ 85s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/poppler' [ 85s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/lib' [ 85s] /bin/sh ../libtool --mode=install /bin/install -c libpoppler.la '/home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/lib' [ 85s] libtool: install: /bin/install -c .libs/libpoppler.so.34.0.0 /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/lib/libpoppler.so.34.0.0 [ 85s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/lib && { ln -s -f libpoppler.so.34.0.0 libpoppler.so.34 || { rm -f libpoppler.so.34 && ln -s libpoppler.so.34.0.0 libpoppler.so.34; }; }) [ 85s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/lib && { ln -s -f libpoppler.so.34.0.0 libpoppler.so || { rm -f libpoppler.so && ln -s libpoppler.so.34.0.0 libpoppler.so; }; }) [ 85s] libtool: install: /bin/install -c .libs/libpoppler.lai /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/lib/libpoppler.la [ 85s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 85s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/include/poppler' [ 85s] /bin/install -c -m 644 poppler-config.h '/home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/include/poppler' [ 85s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/include/poppler' [ 85s] /bin/install -c -m 644 SplashOutputDev.h Annot.h Array.h BuiltinFont.h BuiltinFontTables.h CachedFile.h Catalog.h CharCodeToUnicode.h CMap.h DateInfo.h Decrypt.h Dict.h Error.h FileSpec.h FontEncodingTables.h FontInfo.h Form.h Function.h Gfx.h GfxFont.h GfxState.h GfxState_helpers.h GlobalParams.h Hints.h JArithmeticDecoder.h JBIG2Stream.h Lexer.h Linearization.h Link.h LocalPDFDocBuilder.h Movie.h NameToCharCode.h Object.h OptionalContent.h Outline.h OutputDev.h Page.h PageTransition.h Parser.h PDFDoc.h '/home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/include/poppler' [ 85s] /bin/install -c -m 644 PDFDocBuilder.h PDFDocEncoding.h PDFDocFactory.h PopplerCache.h ProfileData.h PreScanOutputDev.h PSTokenizer.h Rendition.h StdinCachedFile.h StdinPDFDocBuilder.h Stream-CCITT.h Stream.h UnicodeMap.h UnicodeMapTables.h UnicodeTypeTable.h UnicodeCClassTables.h UnicodeCompTables.h UnicodeDecompTables.h ViewerPreferences.h XRef.h CharTypes.h CompactFontTables.h ErrorCodes.h NameToUnicodeTable.h PSOutputDev.h TextOutputDev.h SecurityHandler.h UTF.h UTF8.h XpdfPluginAPI.h Sound.h '/home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/include/poppler' [ 85s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/poppler' [ 85s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/poppler' [ 85s] Making install in utils [ 85s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/utils' [ 85s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/utils' [ 85s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/bin' [ 85s] /bin/sh ../libtool --mode=install /bin/install -c pdfdetach pdffonts pdfimages pdfinfo pdftops pdftotext pdftohtml pdfseparate pdfunite pdftoppm pdftocairo '/home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/bin' [ 85s] libtool: install: warning: `../poppler/libpoppler.la' has not been installed in `/usr/lib' [ 85s] libtool: install: /bin/install -c .libs/pdfdetach /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/bin/pdfdetach [ 85s] libtool: install: warning: `../poppler/libpoppler.la' has not been installed in `/usr/lib' [ 85s] libtool: install: /bin/install -c .libs/pdffonts /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/bin/pdffonts [ 85s] libtool: install: warning: `../poppler/libpoppler.la' has not been installed in `/usr/lib' [ 85s] libtool: install: /bin/install -c .libs/pdfimages /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/bin/pdfimages [ 85s] libtool: install: warning: `../poppler/libpoppler.la' has not been installed in `/usr/lib' [ 85s] libtool: install: /bin/install -c .libs/pdfinfo /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/bin/pdfinfo [ 85s] libtool: install: warning: `../poppler/libpoppler.la' has not been installed in `/usr/lib' [ 85s] libtool: install: /bin/install -c .libs/pdftops /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/bin/pdftops [ 85s] libtool: install: warning: `../poppler/libpoppler.la' has not been installed in `/usr/lib' [ 85s] libtool: install: /bin/install -c .libs/pdftotext /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/bin/pdftotext [ 85s] libtool: install: warning: `../poppler/libpoppler.la' has not been installed in `/usr/lib' [ 85s] libtool: install: /bin/install -c .libs/pdftohtml /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/bin/pdftohtml [ 85s] libtool: install: warning: `../poppler/libpoppler.la' has not been installed in `/usr/lib' [ 85s] libtool: install: /bin/install -c .libs/pdfseparate /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/bin/pdfseparate [ 85s] libtool: install: warning: `../poppler/libpoppler.la' has not been installed in `/usr/lib' [ 85s] libtool: install: /bin/install -c .libs/pdfunite /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/bin/pdfunite [ 85s] libtool: install: warning: `../poppler/libpoppler.la' has not been installed in `/usr/lib' [ 85s] libtool: install: /bin/install -c .libs/pdftoppm /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/bin/pdftoppm [ 85s] libtool: install: warning: `../poppler/libpoppler.la' has not been installed in `/usr/lib' [ 85s] libtool: install: /bin/install -c .libs/pdftocairo /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/bin/pdftocairo [ 85s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/share/man/man1' [ 85s] /bin/install -c -m 644 pdfdetach.1 pdffonts.1 pdfimages.1 pdfinfo.1 pdftops.1 pdftotext.1 pdftohtml.1 pdfseparate.1 pdfunite.1 pdftoppm.1 pdftocairo.1 '/home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/share/man/man1' [ 85s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/utils' [ 85s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/utils' [ 85s] Making install in glib [ 85s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/glib' [ 85s] /bin/make install-recursive [ 85s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/glib' [ 85s] Making install in . [ 85s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/glib' [ 85s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/glib' [ 85s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/lib' [ 85s] /bin/sh ../libtool --mode=install /bin/install -c libpoppler-glib.la '/home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/lib' [ 85s] libtool: install: warning: relinking `libpoppler-glib.la' [ 85s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/poppler-0.22.1/glib; /bin/sh /home/abuild/rpmbuild/BUILD/poppler-0.22.1/libtool --silent --tag CXX --mode=relink g++ -Wall -Woverloaded-virtual -Wnon-virtual-dtor -Wcast-align -fno-exceptions -fno-check-new -fno-common -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -ansi -version-info 14:0:6 -o libpoppler-glib.la -rpath /usr/lib poppler-enums.lo poppler-action.lo poppler-date.lo poppler-document.lo poppler-page.lo poppler-attachment.lo poppler-form-field.lo poppler-annot.lo poppler-layer.lo poppler-media.lo poppler-movie.lo poppler-cached-file-loader.lo poppler-input-stream.lo poppler.lo ../poppler/libpoppler.la ../poppler/libpoppler-cairo.la -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lcairo -lfreetype -lz -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386) [ 86s] libtool: install: /bin/install -c .libs/libpoppler-glib.so.8.6.0T /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/lib/libpoppler-glib.so.8.6.0 [ 86s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/lib && { ln -s -f libpoppler-glib.so.8.6.0 libpoppler-glib.so.8 || { rm -f libpoppler-glib.so.8 && ln -s libpoppler-glib.so.8.6.0 libpoppler-glib.so.8; }; }) [ 86s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/lib && { ln -s -f libpoppler-glib.so.8.6.0 libpoppler-glib.so || { rm -f libpoppler-glib.so && ln -s libpoppler-glib.so.8.6.0 libpoppler-glib.so; }; }) [ 86s] libtool: install: /bin/install -c .libs/libpoppler-glib.lai /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/lib/libpoppler-glib.la [ 86s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 86s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/include/poppler/glib' [ 86s] /bin/install -c -m 644 poppler-features.h '/home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/include/poppler/glib' [ 86s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/include/poppler/glib' [ 86s] /bin/install -c -m 644 poppler-action.h poppler-date.h poppler-document.h poppler-page.h poppler-attachment.h poppler-form-field.h poppler-annot.h poppler-layer.h poppler-media.h poppler-movie.h poppler.h poppler-enums.h '/home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/include/poppler/glib' [ 86s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/glib' [ 86s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/glib' [ 86s] Making install in reference [ 86s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/glib/reference' [ 86s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/glib/reference' [ 86s] make[4]: Nothing to be done for `install-exec-am'. [ 86s] /bin/install -c -m 644 ./html/PopplerAnnot.html [ 86s] /bin/install -c -m 644 ./html/PopplerAttachment.html [ 86s] /bin/install -c -m 644 ./html/PopplerDocument.html [ 86s] /bin/install -c -m 644 ./html/PopplerFormField.html [ 86s] /bin/install -c -m 644 ./html/PopplerLayer.html [ 86s] /bin/install -c -m 644 ./html/PopplerMedia.html [ 86s] /bin/install -c -m 644 ./html/PopplerMovie.html [ 86s] /bin/install -c -m 644 ./html/PopplerPage.html [ 86s] /bin/install -c -m 644 ./html/annotation-glossary.html [ 86s] /bin/install -c -m 644 ./html/api-index-0-12.html [ 86s] /bin/install -c -m 644 ./html/api-index-0-14.html [ 86s] /bin/install -c -m 644 ./html/api-index-0-16.html [ 86s] /bin/install -c -m 644 ./html/api-index-0-18.html [ 86s] /bin/install -c -m 644 ./html/api-index-0-20.html [ 86s] /bin/install -c -m 644 ./html/api-index-0-22.html [ 86s] /bin/install -c -m 644 ./html/api-index-deprecated.html [ 86s] /bin/install -c -m 644 ./html/api-index-full.html [ 86s] /bin/install -c -m 644 ./html/ch01.html [ 86s] /bin/install -c -m 644 ./html/home.png [ 86s] /bin/install -c -m 644 ./html/index.html [ 86s] /bin/install -c -m 644 ./html/index.sgml [ 86s] /bin/install -c -m 644 ./html/left.png [ 86s] /bin/install -c -m 644 ./html/poppler-PopplerAction.html [ 86s] /bin/install -c -m 644 ./html/poppler-Version-and-Features-Information.html [ 86s] /bin/install -c -m 644 ./html/poppler-poppler.html [ 86s] /bin/install -c -m 644 ./html/poppler.devhelp2 [ 86s] /bin/install -c -m 644 ./html/right.png [ 86s] /bin/install -c -m 644 ./html/style.css [ 86s] /bin/install -c -m 644 ./html/up.png [ 86s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/glib/reference' [ 86s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/glib/reference' [ 86s] Making install in demo [ 86s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/glib/demo' [ 86s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/glib/demo' [ 86s] make[4]: Nothing to be done for `install-data-am'. [ 86s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/glib/demo' [ 86s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/glib/demo' [ 86s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/glib' [ 86s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/glib' [ 86s] Making install in test [ 86s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/test' [ 86s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/test' [ 86s] make[2]: Nothing to be done for `install-exec-am'. [ 86s] make[2]: Nothing to be done for `install-data-am'. [ 86s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/test' [ 86s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1/test' [ 86s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1' [ 86s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1' [ 86s] make[2]: Nothing to be done for `install-exec-am'. [ 86s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/lib/pkgconfig' [ 86s] /bin/install -c -m 644 poppler.pc poppler-cairo.pc poppler-splash.pc poppler-glib.pc '/home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/lib/pkgconfig' [ 86s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1' [ 86s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/poppler-0.22.1' [ 86s] + rm -f /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/share/info/dir [ 86s] + find /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386 -regex '.*\.la$' [ 86s] + xargs rm -f -- [ 86s] + find /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386 -regex '.*\.a$' [ 86s] + xargs rm -f -- [ 86s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/poppler-0.22.1 [ 86s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/bin/pdfdetach [ 86s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/bin/pdffonts [ 86s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/bin/pdfimages [ 86s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/bin/pdfinfo [ 86s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/bin/pdfseparate [ 86s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/bin/pdftocairo [ 86s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/bin/pdftohtml [ 86s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/bin/pdftoppm [ 86s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/bin/pdftops [ 86s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/bin/pdftotext [ 86s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/bin/pdfunite [ 86s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/lib/libpoppler-glib.so.8.6.0 [ 86s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/lib/libpoppler.so.34.0.0 [ 86s] cpio: glibc-2.17/csu: Cannot stat: No such file or directory [ 86s] cpio: glibc-2.17/csu/elf-init.c: Cannot stat: No such file or directory [ 86s] cpio: glibc-2.17/csu/init.c: Cannot stat: No such file or directory [ 86s] cpio: glibc-2.17/debug: Cannot stat: No such file or directory [ 86s] cpio: glibc-2.17/debug/stack_chk_fail_local.c: Cannot stat: No such file or directory [ 86s] cpio: glibc-2.17/sysdeps/i386/crti.S: Cannot stat: No such file or directory [ 86s] cpio: glibc-2.17/sysdeps/i386/crtn.S: Cannot stat: No such file or directory [ 86s] cpio: glibc-2.17/sysdeps/i386/start.S: Cannot stat: No such file or directory [ 86s] 9049 blocks [ 86s] + /usr/lib/rpm/brp-compress [ 86s] + /usr/lib/rpm/brp-tizen [ 86s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386 [ 86s] Processing files: poppler-debugsource-0.22.1-1.10.i686 [ 86s] Provides: poppler-debugsource = 0.22.1-1.10 poppler-debugsource(x86-32) = 0.22.1-1.10 [ 86s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 86s] Processing files: libpoppler-0.22.1-1.10.i686 [ 86s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 86s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 86s] [ 86s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.t6wJPG [ 86s] + umask 022 [ 86s] + cd /home/abuild/rpmbuild/BUILD [ 86s] + cd poppler-0.22.1 [ 86s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/share/doc/packages/libpoppler [ 86s] + export DOCDIR [ 86s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/share/doc/packages/libpoppler [ 86s] + cp -pr AUTHORS /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/share/doc/packages/libpoppler [ 86s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/share/doc/packages/libpoppler [ 86s] + cp -pr ChangeLog /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/share/doc/packages/libpoppler [ 86s] + cp -pr NEWS /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/share/doc/packages/libpoppler [ 86s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/share/doc/packages/libpoppler [ 86s] + cp -pr README-XPDF /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/share/doc/packages/libpoppler [ 86s] + cp -pr TODO /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/share/doc/packages/libpoppler [ 86s] + exit 0 [ 86s] Provides: libpoppler = 0.22.1-1.10 libpoppler(x86-32) = 0.22.1-1.10 libpoppler.so.34 [ 86s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 86s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 86s] Requires(post): /sbin/ldconfig [ 86s] Requires(postun): /sbin/ldconfig [ 86s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.11) libc.so.6(GLIBC_2.2) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libfontconfig.so.1 libfreetype.so.6 libgcc_s.so.1 libgcc_s.so.1(GLIBC_2.0) libjpeg.so.8 libjpeg.so.8(LIBJPEG_8.0) liblcms2.so.2 libm.so.6 libm.so.6(GLIBC_2.0) libm.so.6(GLIBC_2.1) libpng12.so.0 libpng12.so.0(PNG12_0) libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(GLIBCXX_3.4) libtiff.so.5 libz.so.1 [ 86s] Processing files: libpoppler-glib-0.22.1-1.10.i686 [ 86s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 86s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 86s] [ 86s] Provides: libpoppler-glib = 0.22.1-1.10 libpoppler-glib(x86-32) = 0.22.1-1.10 libpoppler-glib.so.8 [ 86s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 86s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 86s] Requires(post): /sbin/ldconfig [ 86s] Requires(postun): /sbin/ldconfig [ 86s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.2) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libcairo.so.2 libfontconfig.so.1 libfreetype.so.6 libgcc_s.so.1 libgcc_s.so.1(GLIBC_2.0) libgio-2.0.so.0 libglib-2.0.so.0 libgobject-2.0.so.0 libjpeg.so.8 liblcms2.so.2 libm.so.6 libm.so.6(GLIBC_2.0) libpng12.so.0 libpoppler.so.34 libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(GLIBCXX_3.4) libtiff.so.5 libz.so.1 [ 86s] Processing files: poppler-tools-0.22.1-1.10.i686 [ 86s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 86s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 86s] [ 86s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.dAMlXF [ 86s] + umask 022 [ 86s] + cd /home/abuild/rpmbuild/BUILD [ 86s] + cd poppler-0.22.1 [ 86s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/share/doc/packages/poppler-tools [ 86s] + export DOCDIR [ 86s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/share/doc/packages/poppler-tools [ 86s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386/usr/share/doc/packages/poppler-tools [ 86s] + exit 0 [ 86s] Provides: poppler-tools = 0.22.1-1.10 poppler-tools(x86-32) = 0.22.1-1.10 [ 86s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 86s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.2) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libcairo.so.2 libfreetype.so.6 libgcc_s.so.1 libgcc_s.so.1(GLIBC_2.0) liblcms2.so.2 libm.so.6 libm.so.6(GLIBC_2.0) libpoppler.so.34 libpthread.so.0 libpthread.so.0(GLIBC_2.0) libpthread.so.0(GLIBC_2.2) libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(GLIBCXX_3.4) [ 86s] Processing files: libpoppler-devel-0.22.1-1.10.i686 [ 86s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 86s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 86s] [ 87s] Provides: libpoppler-devel = 0.22.1-1.10 libpoppler-devel(x86-32) = 0.22.1-1.10 pkgconfig(poppler) = 0.22.1 pkgconfig(poppler-cairo) = 0.22.1 pkgconfig(poppler-splash) = 0.22.1 [ 87s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 87s] Requires: /usr/bin/pkg-config pkgconfig(cairo) >= 1.10.0 pkgconfig(poppler) = 0.22.1 [ 87s] Processing files: libpoppler-glib-devel-0.22.1-1.10.i686 [ 87s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 87s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 87s] [ 87s] Provides: libpoppler-glib-devel = 0.22.1-1.10 libpoppler-glib-devel(x86-32) = 0.22.1-1.10 pkgconfig(poppler-glib) = 0.22.1 [ 87s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 87s] Requires: /usr/bin/pkg-config pkgconfig(cairo) >= 1.10.0 pkgconfig(gio-2.0) >= 2.18 pkgconfig(glib-2.0) >= 2.18 pkgconfig(gobject-2.0) >= 2.18 pkgconfig(poppler) = 0.22.1 [ 87s] Processing files: libpoppler-debuginfo-0.22.1-1.10.i686 [ 87s] Provides: debuginfo(build-id) = aff1a4d7299d8ce2ba6c06fb1a67fe7f80ace07c [ 87s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 87s] Processing files: libpoppler-glib-debuginfo-0.22.1-1.10.i686 [ 87s] Provides: debuginfo(build-id) = 7501f7258ed61c4e632cc84cec17bc0b40af5265 [ 87s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 87s] Processing files: poppler-tools-debuginfo-0.22.1-1.10.i686 [ 87s] warning: File listed twice: /usr/lib/debug/.build-id [ 87s] warning: File listed twice: /usr/lib/debug/.build-id [ 87s] warning: File listed twice: /usr/lib/debug/.build-id [ 87s] warning: File listed twice: /usr/lib/debug/.build-id [ 87s] warning: File listed twice: /usr/lib/debug/.build-id [ 87s] warning: File listed twice: /usr/lib/debug/.build-id [ 87s] warning: File listed twice: /usr/lib/debug/.build-id [ 87s] warning: File listed twice: /usr/lib/debug/.build-id [ 87s] warning: File listed twice: /usr/lib/debug/.build-id [ 87s] warning: File listed twice: /usr/lib/debug/.build-id [ 87s] Provides: debuginfo(build-id) = 13ca834aad1799350641670c795e5d13e41aac75 debuginfo(build-id) = 16dccc06374b9b8a720a68b60361746493662673 debuginfo(build-id) = 19184ee32a99b9266a2187398ae0c0966f1f6d18 debuginfo(build-id) = 1dfafb139c81fb91f57bfe56d6f3df30f34d2af1 debuginfo(build-id) = 3fc4af2198e17432e717ecf767667d3ee7197964 debuginfo(build-id) = 4d1ddaabf71342c0a2063c4006c708a7aad0f377 debuginfo(build-id) = 6ab9c944e2b4b531b5569af0d476bfd614bbd74a debuginfo(build-id) = 97e9784ccf7611630441c899e943d3dda7617b8d debuginfo(build-id) = b33eb867241549dec8ff9c7737fca640e0422423 debuginfo(build-id) = d7d341fc7326c007209460a2eee1a18d6f626f1b debuginfo(build-id) = fa718795f35b916097739ad41a818c649d35b3b4 [ 87s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 87s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386 [ 87s] Wrote: /home/abuild/rpmbuild/SRPMS/poppler-0.22.1-1.10.src.rpm [ 88s] Wrote: /home/abuild/rpmbuild/RPMS/i686/poppler-debugsource-0.22.1-1.10.i686.rpm [ 90s] Wrote: /home/abuild/rpmbuild/RPMS/i686/libpoppler-0.22.1-1.10.i686.rpm [ 90s] Wrote: /home/abuild/rpmbuild/RPMS/i686/libpoppler-glib-0.22.1-1.10.i686.rpm [ 90s] Wrote: /home/abuild/rpmbuild/RPMS/i686/poppler-tools-0.22.1-1.10.i686.rpm [ 90s] Wrote: /home/abuild/rpmbuild/RPMS/i686/libpoppler-devel-0.22.1-1.10.i686.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/i686/libpoppler-glib-devel-0.22.1-1.10.i686.rpm [ 92s] Wrote: /home/abuild/rpmbuild/RPMS/i686/libpoppler-debuginfo-0.22.1-1.10.i686.rpm [ 93s] Wrote: /home/abuild/rpmbuild/RPMS/i686/libpoppler-glib-debuginfo-0.22.1-1.10.i686.rpm [ 93s] Wrote: /home/abuild/rpmbuild/RPMS/i686/poppler-tools-debuginfo-0.22.1-1.10.i686.rpm [ 93s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.0eThJ5 [ 93s] + umask 022 [ 93s] + cd /home/abuild/rpmbuild/BUILD [ 93s] + cd poppler-0.22.1 [ 93s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/poppler-0.22.1-1.10.i386 [ 93s] + exit 0 [ 93s] ... checking for files with abuild user/group [ 93s] [ 93s] RPMLINT report: [ 93s] =============== [ 96s] libpoppler-devel.i686: W: non-standard-group Development/Libraries [ 96s] libpoppler-glib-devel.i686: W: non-standard-group Development/Libraries [ 96s] The value of the Group tag in the package is not valid. Valid groups are [ 96s] listed here: https://wiki.tizen.org/wiki/Packaging/Guidelines#Group_Tag [ 96s] [ 96s] poppler-tools.i686: W: license-file-in-docs /usr/share/doc/packages/poppler-tools/COPYING [ 96s] libpoppler.i686: W: license-file-in-docs /usr/share/doc/packages/libpoppler/COPYING [ 96s] A file whose name suggests that it contains a license is included in the [ 96s] package as a document. Such files need to be marked with %license and not with [ 96s] %doc, which will install them in a special directory seperated from the [ 96s] documentation. [ 96s] [ 96s] 6 packages and 0 specfiles checked; 0 errors, 4 warnings. [ 96s] [ 96s] ... creating baselibs [ 96s] ... comparing built packages with the former built [ 96s] /usr/lib/build/rpm-check.sh [ 96s] compare /.build.oldpackages/poppler-0.22.1-2.4.src.rpm /home/abuild/rpmbuild/SRPMS/poppler-0.22.1-1.10.src.rpm [ 96s] --- /tmp/tmp.5BU65DfwLd 2013-07-26 08:46:52.710146027 +0000 [ 96s] +++ /tmp/tmp.StedRvYHbV 2013-07-26 08:46:52.722146027 +0000 [ 96s] @@ -2,7 +2,7 @@ [ 96s] PDF Rendering Library [ 96s] Poppler is a PDF rendering library, forked from the xpdf PDF viewer [ 96s] developed by Derek Noonburg of Glyph and Cog, LLC. [ 96s] - tizen Tizen obs://build.tizen.org/Tizen/standard/1ca5e2a4caeb0b59823284d3a1014dd0-poppler GPL-2.0+ GPL-2.0+ [ 96s] + tizen Tizen:IVI:Release obs://build.tizen.org/Tizen:IVI:Release/standard/1ca5e2a4caeb0b59823284d3a1014dd0-poppler GPL-2.0+ GPL-2.0+ [ 96s] System/Libraries http://poppler.freedesktop.org/ (none) (none) (none) [ 96s] (none) 4.11.0.1 (none) [ 96s] cpio gzip 9 [ 96s] RPM meta information is different [ 96s] ... saving built packages [ 96s] /home/abuild/rpmbuild/RPMS/i686/libpoppler-0.22.1-1.10.i686.rpm [ 96s] /home/abuild/rpmbuild/RPMS/i686/libpoppler-debuginfo-0.22.1-1.10.i686.rpm [ 96s] /home/abuild/rpmbuild/RPMS/i686/libpoppler-devel-0.22.1-1.10.i686.rpm [ 96s] /home/abuild/rpmbuild/RPMS/i686/libpoppler-glib-0.22.1-1.10.i686.rpm [ 96s] /home/abuild/rpmbuild/RPMS/i686/libpoppler-glib-debuginfo-0.22.1-1.10.i686.rpm [ 96s] /home/abuild/rpmbuild/RPMS/i686/libpoppler-glib-devel-0.22.1-1.10.i686.rpm [ 96s] /home/abuild/rpmbuild/RPMS/i686/poppler-debugsource-0.22.1-1.10.i686.rpm [ 96s] /home/abuild/rpmbuild/RPMS/i686/poppler-tools-0.22.1-1.10.i686.rpm [ 96s] /home/abuild/rpmbuild/RPMS/i686/poppler-tools-debuginfo-0.22.1-1.10.i686.rpm [ 96s] /home/abuild/rpmbuild/SRPMS/poppler-0.22.1-1.10.src.rpm [ 96s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 96s] [ 96s] w12 finished "build poppler.spec" at Fri Jul 26 08:46:52 UTC 2013. [ 96s] [ 99s] [ 92.076386] SysRq : Power Off [ 101s] [ 93.555757] Power down. [ 101s] build: extracting built packages... [ 101s] libpoppler-0.22.1-1.10.i686.rpm [ 101s] libpoppler-debuginfo-0.22.1-1.10.i686.rpm [ 101s] libpoppler-devel-0.22.1-1.10.i686.rpm [ 101s] libpoppler-glib-0.22.1-1.10.i686.rpm [ 101s] libpoppler-glib-debuginfo-0.22.1-1.10.i686.rpm [ 101s] libpoppler-glib-devel-0.22.1-1.10.i686.rpm [ 101s] poppler-debugsource-0.22.1-1.10.i686.rpm [ 101s] poppler-tools-0.22.1-1.10.i686.rpm [ 101s] poppler-tools-debuginfo-0.22.1-1.10.i686.rpm [ 101s] poppler-0.22.1-1.10.src.rpm [ 101s] rpmlint.log