[ 0s] Using BUILD_ROOT=/srv/build/root_6/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_6/root [ 0s] [ 0s] [ 0s] w06 started "build dracut.spec" at Wed Aug 21 00:55:11 UTC 2013. [ 0s] [ 0s] Building dracut for project 'Tizen' repository 'standard' arch 'i586' srcmd5 '09be87dc28f60672028e190f739b19e8' [ 0s] [ 0s] processing specfile /srv/build/root_6/.build-srcdir/dracut.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_6/.build-srcdir/dracut.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/6/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_6/.build.rpmlist /srv/build/root_6/.build-srcdir/dracut.spec build rpmlint-Factory ... [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/34] preinstalling libmagic-data... [ 0s] [2/34] preinstalling setup... [ 0s] [3/34] preinstalling filesystem... [ 0s] [4/34] preinstalling glibc... [ 0s] [5/34] preinstalling bash... [ 0s] [6/34] preinstalling diffutils... [ 0s] [7/34] preinstalling grep... [ 0s] [8/34] preinstalling libattr... [ 1s] [9/34] preinstalling libbz2... [ 1s] [10/34] preinstalling libcap... [ 1s] [11/34] preinstalling libelf... [ 1s] [12/34] preinstalling libfreebl3... [ 1s] [13/34] preinstalling liblua... [ 1s] [14/34] preinstalling liblzma... [ 1s] [15/34] preinstalling libncurses... [ 1s] [16/34] preinstalling libpopt... [ 1s] [17/34] preinstalling libsmack... [ 1s] [18/34] preinstalling libsqlite... [ 1s] [19/34] preinstalling nspr... [ 1s] [20/34] preinstalling sed... [ 1s] [21/34] preinstalling tar... [ 1s] [22/34] preinstalling zlib... [ 1s] [23/34] preinstalling libacl... [ 1s] [24/34] preinstalling libgcc47... [ 1s] [25/34] preinstalling libreadline... [ 1s] [26/34] preinstalling smack... [ 1s] [27/34] preinstalling bzip2... [ 1s] [28/34] preinstalling libmagic... [ 1s] [29/34] preinstalling libxml2... [ 1s] [30/34] preinstalling coreutils... [ 1s] [31/34] preinstalling nss... [ 1s] [32/34] preinstalling libsoftokn3... [ 1s] [33/34] preinstalling rpm... [ 1s] [34/34] preinstalling rpm-security-plugin... [ 1s] [ 2s] [1/8] preinstalling libext2fs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling perl... [ 2s] [5/8] preinstalling grep... [ 2s] [6/8] preinstalling libblkid... [ 2s] [7/8] preinstalling libmount... [ 2s] [8/8] preinstalling util-linux... [ 2s] copying packages... [ 3s] reordering...cycle: coreutils -> pam [ 3s] breaking dependency pam -> coreutils [ 3s] cycle: nss -> libsoftokn3 [ 3s] breaking dependency nss -> libsoftokn3 [ 3s] done [ 4s] booting kvm ... [ 4s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -net none -cpu host -kernel /srv/kernel/vmlinuz -initrd /srv/kernel/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm -m 8192 -drive file=/srv/build/root_6/root,if=virtio,cache=unsafe -drive file=/srv/build/root_6/root,if=ide,index=0,cache=unsafe -drive file=/srv/build/root_6/swap,if=virtio,cache=unsafe -smp 4 [ 5s]  [ 5s] Google, Inc. [ 5s] Serial Graphics Adapter 09/05/12 [ 5s] SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (abuild@build24) Wed Sep 5 14:01:11 UTC 2012 [ 5s] 4 0 [ 5s]  SeaBIOS (version 1.6.3-20120905_140109) [ 5s] [ 5s] Booting from ROM... [ 8s] doing fast boot [ 8s] Creating device nodes with udev [ 8s] udevd[238]: failed to execute '/etc/sysconfig/network/scripts/ifup-sysctl' '/etc/sysconfig/network/scripts/ifup-sysctl lo -o hotplug': No such file or directory [ 8s] [ 8s] Waiting for device /dev/vda to appear: ok [ 8s] fsck from util-linux 2.20.1 [ 8s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 8s] /dev/vda: clean, 5189/2097152 files, 182683/8388608 blocks [ 8s] fsck succeeded. Mounting root device read-write. [ 8s] Mounting root /dev/vda [ 8s] mount -o rw,noatime,acl,user_xattr -t ext4 /dev/vda /root [ 9s] replacing /etc/mtab with symlink to /proc/self/mounts [ 9s] sh: /sbin/modprobe: No such file or directory [ 9s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 8: interpreter '/usr/bin/qemu-arm-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 9: interpreter '/usr/bin/qemu-armeb-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 10: interpreter '/usr/bin/qemu-ppc-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 11: interpreter '/usr/bin/qemu-mips-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 12: interpreter '/usr/bin/qemu-mipsel-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 18: interpreter '/usr/bin/qemu-sh4-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 19: interpreter '/usr/bin/qemu-sh4eb-binfmt' not found, ignoring [ 9s] 2nd stage started in virtual machine [ 9s] machine type: x86_64 [ 9s] switching personality to 8... [ 9s] 2nd stage started in virtual machine [ 9s] machine type: i686 [ 9s] [ 1.888689] EXT4-fs (vda): Cannot change data mode on remount [ 9s] mount: / not mounted or bad option [ 9s] In some cases useful info is found in syslog - try [ 9s] dmesg | tail or so [ 9s] swapon /dev/vdb [ 9s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 9s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 9s] *********************************** [ 9s] VM_TYPE: kvm script: /.build/build [ 9s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 9s] mount: none is already mounted or /proc busy [ 9s] mount: none is already mounted or /dev/pts busy [ 9s] logging output to //.build.log... [ 9s] processing specfile /.build-srcdir/dracut.spec ... [ 9s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/dracut.spec build rpmlint-Factory ... [ 9s] running setup postinstall script [ 9s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 9s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 9s] initializing rpm db... [ 9s] [1/121] installing libmagic-data-5.11-2.10 [ 9s] [2/121] installing setup-0.9-3.14 [ 9s] [3/121] installing terminfo-base-5.9-2.9 [ 9s] [4/121] installing filesystem-3.1-5.4 [ 9s] error: Failed to set SMACK64 _ for /proc: Operation not supported [ 9s] [5/121] installing glibc-2.17-4.6 [ 9s] [6/121] installing bash-4.2-4.1 [ 10s] [7/121] installing cpio-2.11-4.8 [ 10s] [8/121] installing diffutils-3.2-2.9 [ 10s] [9/121] installing findutils-4.5.10-2.10 [ 10s] [10/121] installing hostname-3.12-2.8 [ 10s] [11/121] installing libattr-2.4.46-2.12 [ 10s] [12/121] installing libbz2-1.0.6-2.30 [ 10s] [13/121] installing libcap-2.22-2.30 [ 10s] [14/121] installing libcares-1.7.5-2.11 [ 10s] [15/121] installing libelf-0.155-3.3 [ 10s] [16/121] installing libexpat-2.1.0-2.10 [ 10s] [17/121] installing libext2fs-1.42.6-2.12 [ 10s] [18/121] installing libfreebl3-3.13.6-2.42 [ 10s] [19/121] installing libgdbm-1.10-2.12 [ 10s] [20/121] installing libgmp-5.0.5-2.9 [ 10s] [21/121] installing libgpg-error-1.10-2.8 [ 10s] [22/121] installing libltdl-2.4.2-2.2 [ 10s] [23/121] installing liblua-5.1.4-2.13 [ 10s] [24/121] installing liblzma-5.0.3-2.10 [ 10s] [25/121] installing libpcre-8.31-2.10 [ 10s] [26/121] installing libpopt-1.16-2.10 [ 10s] [27/121] installing libpython-2.7.3-2.16 [ 10s] [28/121] installing libsmack-1.0.1-1.1 [ 11s] [29/121] installing libsqlite-3.7.14-2.10 [ 11s] [30/121] installing libuuid-2.22.2-3.4 [ 11s] [31/121] installing m4-1.4.16-2.10 [ 15s] [32/121] installing net-tools-2.0_20121208git-2.13 [ 16s] [33/121] installing nspr-4.9.2-2.20 [ 16s] [34/121] installing patch-2.7-1.6 [ 16s] [35/121] installing pkg-config-0.28-2.10 [ 16s] [36/121] installing sed-4.2.1-2.11 [ 16s] [37/121] installing tar-1.26-2.12 [ 16s] [38/121] installing update-alternatives-1.16.3-2.4 [ 16s] [39/121] installing which-2.20-5.10 [ 16s] [40/121] installing zlib-1.2.7-2.10 [ 16s] [41/121] installing libncurses-5.9-2.9 [ 16s] [42/121] installing build-compare-2012.01.26-2.19 [ 16s] [43/121] installing dash-0.5.7-5.10 [ 16s] [44/121] installing gawk-4.0.1-2.12 [ 16s] [45/121] installing grep-2.14-3.11 [ 16s] [46/121] installing less-451-6.11 [ 16s] [47/121] installing libacl-2.2.51-3.10 [ 16s] [48/121] installing libasm-0.155-3.3 [ 16s] [49/121] installing libblkid-2.22.2-3.4 [ 16s] [50/121] installing libgcc47-4.7.2-2.24 [ 16s] [51/121] installing libgcrypt-1.5.0-2.9 [ 16s] [52/121] installing libgomp47-4.7.2-2.24 [ 16s] [53/121] installing libidn-1.25-2.10 [ 16s] [54/121] installing libmpfr-3.1.1-2.9 [ 19s] [55/121] installing libopenssl-1.0.1e-1.5 [ 20s] [56/121] installing libreadline-5.2-2.10 [ 20s] [57/121] installing make-3.82-3.12 [ 20s] [58/121] installing nss-certs-3.13.6-2.42 [ 20s] [59/121] installing smack-1.0.1-1.1 [ 20s] [60/121] installing bzip2-1.0.6-2.30 [ 20s] [61/121] installing libmagic-5.11-2.10 [ 20s] [62/121] installing libxml2-2.8.0-2.9 [ 20s] [63/121] installing xz-5.0.3-2.10 [ 20s] [64/121] installing binutils-2.23.1-4.9 [ 22s] update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode. [ 22s] [65/121] installing libdw-0.155-3.3 [ 22s] [66/121] installing file-5.11-2.10 [ 22s] [67/121] installing libmount-2.22.2-3.4 [ 22s] [68/121] installing libmpc-1.0-2.8 [ 22s] [69/121] installing libstdc++47-4.7.2-2.24 [ 22s] [70/121] installing libxml2-tools-2.8.0-2.9 [ 22s] [71/121] installing rsync-3.0.8-2.10 [ 23s] [72/121] installing libcurl-7.21.3-2.10 [ 23s] [73/121] installing libxslt-1.1.26-2.7 [ 23s] [74/121] installing db4-4.8.30.NC-2.10 [ 23s] [75/121] installing libxslt-tools-1.1.26-2.7 [ 23s] [76/121] installing libgmpxx-5.0.5-2.9 [ 23s] [77/121] installing elfutils-0.155-3.3 [ 23s] [78/121] installing libppl-0.11.2-2.15 [ 23s] [79/121] installing perl-5.16.3-2.22 [ 38s] [80/121] installing python-2.7.3-2.16 [ 39s] [81/121] installing build-mkbaselibs-20120927-2.8 [ 39s] [82/121] installing perl-Error-0.17017-8.7 [ 39s] [83/121] installing autoconf-2.69-2.7 [ 40s] [84/121] installing python-xml-2.7.3-2.16 [ 40s] [85/121] installing libppl_c-0.11.2-2.15 [ 40s] [86/121] installing libcloog-0.15.10-2.8 [ 40s] [87/121] installing build-20120927-2.8 [ 40s] [88/121] installing cpp47-4.7.2-2.24 [ 40s] [89/121] installing cpp-4.7-2.2 [ 40s] [90/121] installing pam-1.1.6-4.1 [ 41s] [91/121] installing nss-3.13.6-2.42 [ 41s] [92/121] installing pwdutils-3.2.19-2.4 [ 41s] [93/121] installing libsoftokn3-3.13.6-2.42 [ 41s] [94/121] installing coreutils-8.21-4.10 [ 41s] [95/121] installing util-linux-2.22.2-3.4 [ 41s] [96/121] installing rpm-4.11.0.1-5.1 [ 42s] [97/121] installing linux-glibc-devel-3.10-1.1 [ 44s] [98/121] installing glibc-locale-2.17-4.6 [ 44s] [99/121] installing gzip-1.5-2.10 [ 44s] [100/121] installing automake-1.12.1-2.7 [ 45s] [101/121] installing sgml-skel-0.6-2.9 [ 45s] [102/121] installing tzdata-2012e-2.8 [ 46s] [103/121] installing openssh-6.2p2-1.3 [ 46s] [104/121] installing rpmlint-mini-1.4-3.17 [ 46s] [105/121] installing rpm-security-plugin-4.11.0.1-5.1 [ 46s] warning: /etc/device-sec-policy created as /etc/device-sec-policy.rpmnew [ 46s] [106/121] installing rpmlint-tizen-1.0-9.1 [ 46s] [107/121] installing iso_ent-2000.11.03-2.9 [ 46s] [108/121] installing glibc-devel-2.17-4.6 [ 47s] [109/121] installing libtool-2.4.2-2.2 [ 48s] [110/121] installing xmlcharent-0.3-406.7 [ 48s] [111/121] installing git-core-1.8.1.3-2.18 [ 48s] [112/121] installing git-1.8.1.3-2.18 [ 48s] [113/121] installing libstdc++47-devel-4.7.2-2.24 [ 51s] [114/121] installing docbook_4-4.5-2.7 [ 53s] [115/121] installing gcc47-4.7.2-2.24 [ 53s] [116/121] installing gcc-4.7-2.2 [ 53s] [117/121] installing docbook-xsl-stylesheets-1.77.1-2.21 [ 56s] [118/121] installing gcc47-c++-4.7.2-2.24 [ 56s] [119/121] installing gcc-c++-4.7-2.2 [ 56s] [120/121] installing asciidoc-8.6.6-2.8 [ 56s] [121/121] installing rpm-build-4.11.0.1-5.1 [ 56s] removing nis flags from //etc/nsswitch.conf... [ 56s] now finalizing build dir... [ 57s] build target is i686-tizen-linux [ 57s] ----------------------------------------------------------------- [ 57s] I have the following modifications for dracut.spec: [ 57s] 8c8 [ 57s] < Release: 0 [ 57s] --- [ 57s] > Release: 2.17 [ 57s] 232a233 [ 57s] > %changelog [ 57s] ----------------------------------------------------------------- [ 57s] ----- building dracut.spec (user abuild) [ 57s] ----------------------------------------------------------------- [ 57s] ----------------------------------------------------------------- [ 57s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen/standard/09be87dc28f60672028e190f739b19e8-dracut' /home/abuild/rpmbuild/SOURCES/dracut.spec [ 57s] Building target platforms: i686-tizen-linux [ 57s] Building for target i686-tizen-linux [ 57s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.atHREm [ 57s] + umask 022 [ 57s] + cd /home/abuild/rpmbuild/BUILD [ 57s] + cd /home/abuild/rpmbuild/BUILD [ 57s] + rm -rf dracut-025 [ 57s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/dracut-025.tar.xz [ 57s] + /bin/tar -xf - [ 57s] + STATUS=0 [ 57s] + '[' 0 -ne 0 ']' [ 57s] + cd dracut-025 [ 57s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 57s] + echo 'Patch #0 (0001-We-do-not-ship-pidof.patch):' [ 57s] Patch #0 (0001-We-do-not-ship-pidof.patch): [ 57s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-We-do-not-ship-pidof.patch [ 57s] + /bin/patch -p1 --fuzz=2 [ 57s] patching file modules.d/99base/module-setup.sh [ 57s] + cp /home/abuild/rpmbuild/SOURCES/dracut.manifest . [ 57s] + exit 0 [ 57s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.nAXgvB [ 57s] + umask 022 [ 57s] + cd /home/abuild/rpmbuild/BUILD [ 57s] + cd dracut-025 [ 57s] + LANG=C [ 57s] + export LANG [ 57s] + unset DISPLAY [ 57s] + CFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [ 57s] + export CFLAGS [ 57s] + CXXFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [ 57s] + export CXXFLAGS [ 57s] + FFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -I%_fmoddir' [ 57s] + export FFLAGS [ 57s] + LD_AS_NEEDED=1 [ 57s] + export LD_AS_NEEDED [ 57s] + make all [ 57s] cc -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -std=gnu99 -c -o install/dracut-install.o install/dracut-install.c [ 57s] install/dracut-install.c: In function 'resolve_deps': [ 57s] install/dracut-install.c:259:21: warning: ignoring return value of 'read', declared with attribute warn_unused_result [-Wunused-result] [ 57s] install/dracut-install.c:277:17: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result] [ 57s] install/dracut-install.c: In function 'dracut_install': [ 57s] install/dracut-install.c:404:17: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result] [ 57s] install/dracut-install.c:486:33: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result] [ 57s] install/dracut-install.c: In function 'convert_abs_rel': [ 57s] install/dracut-install.c:100:17: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result] [ 57s] install/dracut-install.c: In function 'hmac_install': [ 57s] install/dracut-install.c:346:25: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result] [ 57s] install/dracut-install.c:347:25: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result] [ 57s] install/dracut-install.c:349:25: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result] [ 57s] install/dracut-install.c:350:25: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result] [ 57s] install/dracut-install.c: In function 'cp': [ 57s] install/dracut-install.c:218:39: warning: ignoring return value of 'fchown', declared with attribute warn_unused_result [-Wunused-result] [ 57s] install/dracut-install.c: In function 'find_binary': [ 57s] install/dracut-install.c:698:25: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result] [ 58s] cc -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -std=gnu99 -c -o install/hashmap.o install/hashmap.c [ 58s] cc -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -std=gnu99 -c -o install/log.o install/log.c [ 58s] cc -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -std=gnu99 -c -o install/util.o install/util.c [ 58s] cc install/dracut-install.o install/hashmap.o install/log.o install/util.o -o install/dracut-install [ 58s] ln -fs install/dracut-install dracut-install [ 58s] asciidoc -d manpage -b docbook -o lsinitrd.1.xml lsinitrd.1.asc [ 58s] xsltproc -o lsinitrd.1 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl lsinitrd.1.xml [ 59s] Note: Writing lsinitrd.1 [ 59s] asciidoc -d manpage -b docbook -o dracut.conf.5.xml dracut.conf.5.asc [ 59s] xsltproc -o dracut.conf.5 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.conf.5.xml [ 60s] Note: Writing dracut.conf.5 [ 60s] asciidoc -d manpage -b docbook -o dracut.cmdline.7.xml dracut.cmdline.7.asc [ 61s] xsltproc -o dracut.cmdline.7 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.cmdline.7.xml [ 62s] Note: Writing dracut.cmdline.7 [ 62s] asciidoc -d manpage -b docbook -o dracut.8.xml dracut.8.asc [ 63s] xsltproc -o dracut.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.8.xml [ 63s] Note: Writing dracut.8 [ 63s] asciidoc -d manpage -b docbook -o dracut-catimages.8.xml dracut-catimages.8.asc [ 63s] xsltproc -o dracut-catimages.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut-catimages.8.xml [ 63s] Note: Writing dracut-catimages.8 [ 64s] asciidoc -d manpage -b docbook -o mkinitrd.8.xml mkinitrd.8.asc [ 64s] xsltproc -o mkinitrd.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl mkinitrd.8.xml [ 64s] Note: Writing mkinitrd.8 [ 64s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-cmdline.service.8.xml modules.d/98systemd/dracut-cmdline.service.8.asc [ 64s] xsltproc -o modules.d/98systemd/dracut-cmdline.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-cmdline.service.8.xml [ 65s] Note: Writing dracut-cmdline.service.8 [ 65s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-initqueue.service.8.xml modules.d/98systemd/dracut-initqueue.service.8.asc [ 65s] xsltproc -o modules.d/98systemd/dracut-initqueue.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-initqueue.service.8.xml [ 65s] Note: Writing dracut-initqueue.service.8 [ 65s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-pivot.service.8.xml modules.d/98systemd/dracut-pre-pivot.service.8.asc [ 65s] xsltproc -o modules.d/98systemd/dracut-pre-pivot.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-pivot.service.8.xml [ 66s] Note: Writing dracut-pre-pivot.service.8 [ 66s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-trigger.service.8.xml modules.d/98systemd/dracut-pre-trigger.service.8.asc [ 66s] xsltproc -o modules.d/98systemd/dracut-pre-trigger.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-trigger.service.8.xml [ 66s] Note: Writing dracut-pre-trigger.service.8 [ 66s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-udev.service.8.xml modules.d/98systemd/dracut-pre-udev.service.8.asc [ 66s] xsltproc -o modules.d/98systemd/dracut-pre-udev.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-udev.service.8.xml [ 67s] Note: Writing dracut-pre-udev.service.8 [ 67s] asciidoc -d manpage -b docbook -o modules.d/98systemd/initrd-switch-root.service.8.xml modules.d/98systemd/initrd-switch-root.service.8.asc [ 67s] xsltproc -o modules.d/98systemd/initrd-switch-root.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/initrd-switch-root.service.8.xml [ 67s] Note: Writing initrd-switch-root.service.8 [ 67s] asciidoc -d manpage -b docbook -o modules.d/98systemd/udevadm-cleanup-db.service.8.xml modules.d/98systemd/udevadm-cleanup-db.service.8.asc [ 67s] xsltproc -o modules.d/98systemd/udevadm-cleanup-db.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/udevadm-cleanup-db.service.8.xml [ 68s] Note: Writing udevadm-cleanup-db.service.8 [ 68s] asciidoc -a numbered -d book -b docbook -o dracut.xml dracut.asc [ 71s] xsltproc -o dracut.html --xinclude -nonet \ [ 71s] --stringparam html.stylesheet \ [ 71s] http://docs.fedoraproject.org/en-US/Common_Content/css/default.css \ [ 71s] http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl dracut.xml [ 72s] rm dracut.xml [ 72s] rm dracut.8.xml dracut.cmdline.7.xml modules.d/98systemd/udevadm-cleanup-db.service.8.xml modules.d/98systemd/dracut-initqueue.service.8.xml modules.d/98systemd/dracut-pre-pivot.service.8.xml mkinitrd.8.xml modules.d/98systemd/dracut-cmdline.service.8.xml dracut.conf.5.xml modules.d/98systemd/dracut-pre-udev.service.8.xml modules.d/98systemd/initrd-switch-root.service.8.xml dracut-catimages.8.xml modules.d/98systemd/dracut-pre-trigger.service.8.xml lsinitrd.1.xml [ 72s] + exit 0 [ 72s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.gd00jK [ 72s] + umask 022 [ 72s] + cd /home/abuild/rpmbuild/BUILD [ 72s] + cd dracut-025 [ 72s] + LANG=C [ 72s] + export LANG [ 72s] + unset DISPLAY [ 72s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386 [ 72s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386 [ 72s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386 libdir=/usr/lib bindir=/usr/bin systemdsystemunitdir=/usr/lib/systemd/system sysconfdir=/etc mandir=/usr/share/man [ 72s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/lib/dracut [ 72s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/bin [ 72s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/etc [ 72s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/lib/dracut/modules.d [ 72s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/share/man/man1 /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/share/man/man5 /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/share/man/man7 /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/share/man/man8 [ 72s] install -m 0755 dracut.sh /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/bin/dracut [ 72s] install -m 0755 dracut-catimages.sh /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/bin/dracut-catimages [ 72s] install -m 0755 mkinitrd-dracut.sh /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/bin/mkinitrd [ 72s] install -m 0755 lsinitrd.sh /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/bin/lsinitrd [ 72s] install -m 0644 dracut.conf /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/etc/dracut.conf [ 72s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/etc/dracut.conf.d [ 72s] install -m 0755 dracut-functions.sh /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/lib/dracut/dracut-functions.sh [ 72s] install -m 0755 dracut-version.sh /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/lib/dracut/dracut-version.sh [ 72s] ln -fs dracut-functions.sh /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/lib/dracut/dracut-functions [ 72s] install -m 0755 dracut-logger.sh /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/lib/dracut/dracut-logger.sh [ 72s] install -m 0755 dracut-initramfs-restore.sh /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/lib/dracut/dracut-initramfs-restore [ 72s] cp -arx modules.d /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/lib/dracut [ 72s] for i in lsinitrd.1; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/share/man/man1/${i##*/}; done [ 72s] for i in dracut.conf.5; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/share/man/man5/${i##*/}; done [ 72s] for i in dracut.cmdline.7; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/share/man/man7/${i##*/}; done [ 72s] for i in dracut.8 dracut-catimages.8 mkinitrd.8 modules.d/98systemd/dracut-cmdline.service.8 modules.d/98systemd/dracut-initqueue.service.8 modules.d/98systemd/dracut-pre-pivot.service.8 modules.d/98systemd/dracut-pre-trigger.service.8 modules.d/98systemd/dracut-pre-udev.service.8 modules.d/98systemd/initrd-switch-root.service.8 modules.d/98systemd/udevadm-cleanup-db.service.8; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/share/man/man8/${i##*/}; done [ 72s] ln -fs dracut.cmdline.7 /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/share/man/man7/dracut.kernel.7 [ 72s] if [ -n "/usr/lib/systemd/system" ]; then \ [ 72s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/lib/systemd/system; \ [ 72s] install -m 0644 dracut-shutdown.service /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/lib/systemd/system; \ [ 72s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/lib/systemd/system/shutdown.target.wants; \ [ 72s] ln -s ../dracut-shutdown.service \ [ 72s] /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/lib/systemd/system/shutdown.target.wants/dracut-shutdown.service; \ [ 72s] fi [ 72s] if [ -f install/dracut-install ]; then \ [ 72s] install -m 0755 install/dracut-install /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/lib/dracut/dracut-install; \ [ 72s] fi [ 72s] + echo DRACUT_VERSION=025-2.17 [ 72s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386//usr/lib/dracut/modules.d/01fips [ 72s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386//usr/lib/dracut/modules.d/02fips-aesni [ 72s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386//usr/lib/dracut/modules.d/50gensplash [ 72s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386//usr/lib/dracut/modules.d/96securityfs [ 72s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386//usr/lib/dracut/modules.d/97masterkey [ 72s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386//usr/lib/dracut/modules.d/98integrity [ 72s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386//usr/lib/dracut/modules.d/98selinux [ 72s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/boot/dracut [ 72s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/var/lib/dracut/overlay [ 72s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/var/log [ 72s] + touch /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/var/log/dracut.log [ 72s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/com/initramfs [ 72s] + install -m 0644 dracut.conf.d/suse.conf.example /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/etc/dracut.conf.d/01-dist.conf [ 72s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/etc/logrotate.d [ 72s] + install -m 0644 dracut.logrotate /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/etc/logrotate.d/dracut_log [ 72s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/dracut-025 [ 72s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/lib/dracut/dracut-install [ 72s] cpio: glibc-2.17/csu: Cannot stat: No such file or directory [ 72s] cpio: glibc-2.17/csu/elf-init.c: Cannot stat: No such file or directory [ 72s] cpio: glibc-2.17/csu/init.c: Cannot stat: No such file or directory [ 72s] cpio: glibc-2.17/sysdeps/i386/crti.S: Cannot stat: No such file or directory [ 72s] cpio: glibc-2.17/sysdeps/i386/crtn.S: Cannot stat: No such file or directory [ 72s] cpio: glibc-2.17/sysdeps/i386/start.S: Cannot stat: No such file or directory [ 72s] 171 blocks [ 72s] + /usr/lib/rpm/brp-compress [ 72s] + /usr/lib/rpm/brp-tizen [ 72s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386 [ 72s] Processing files: dracut-025-2.17.i686 [ 72s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 72s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 72s] [ 72s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.hKgJaV [ 72s] + umask 022 [ 72s] + cd /home/abuild/rpmbuild/BUILD [ 72s] + cd dracut-025 [ 72s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/share/licenses/dracut [ 72s] + export LICENSEDIR [ 72s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/share/licenses/dracut [ 72s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386/usr/share/licenses/dracut [ 72s] + exit 0 [ 73s] Provides: config(dracut) = 025-2.17 dracut = 025-2.17 dracut(x86-32) = 025-2.17 [ 73s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 73s] Requires: /bin/bash /bin/sh libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libc.so.6(GLIBC_2.8) [ 73s] Conflicts: systemd < 187 [ 73s] Processing files: dracut-debugsource-025-2.17.i686 [ 73s] Provides: dracut-debugsource = 025-2.17 dracut-debugsource(x86-32) = 025-2.17 [ 73s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 73s] Processing files: dracut-network-025-2.17.i686 [ 73s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 73s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 73s] [ 73s] Provides: dracut-network = 025-2.17 dracut-network(x86-32) = 025-2.17 [ 73s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 73s] Requires: /bin/bash /bin/sh [ 73s] Processing files: dracut-caps-025-2.17.i686 [ 73s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 73s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 73s] [ 73s] Provides: dracut-caps = 025-2.17 dracut-caps(x86-32) = 025-2.17 [ 73s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 73s] Requires: /bin/bash [ 73s] Processing files: dracut-tools-025-2.17.i686 [ 73s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 73s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 73s] [ 73s] Provides: dracut-tools = 025-2.17 dracut-tools(x86-32) = 025-2.17 [ 73s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 73s] Requires: /bin/bash [ 73s] Processing files: dracut-debuginfo-025-2.17.i686 [ 73s] Provides: debuginfo(build-id) = a2bf3164c32d564e1d5fff931909038f0f32a3bb [ 73s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 73s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386 [ 73s] Wrote: /home/abuild/rpmbuild/SRPMS/dracut-025-2.17.src.rpm [ 73s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-025-2.17.i686.rpm [ 73s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-debugsource-025-2.17.i686.rpm [ 73s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-network-025-2.17.i686.rpm [ 73s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-caps-025-2.17.i686.rpm [ 73s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-tools-025-2.17.i686.rpm [ 73s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-debuginfo-025-2.17.i686.rpm [ 73s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.LLM6KF [ 73s] + umask 022 [ 73s] + cd /home/abuild/rpmbuild/BUILD [ 73s] + cd dracut-025 [ 73s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/dracut-025-2.17.i386 [ 73s] + exit 0 [ 73s] ... checking for files with abuild user/group [ 73s] [ 73s] RPMLINT report: [ 73s] =============== [ 74s] dracut.i686: W: tizen-filelist-forbidden-fhs23 /usr/com is not allowed in FHS 2.3 [ 81s] see http://www.pathname.com/fhs/ to find a better location [ 81s] [ 81s] dracut.i686: W: script-without-shebang /usr/lib/dracut/dracut-version.sh [ 81s] This text file has executable bits set or is located in a path dedicated for [ 81s] executables, but lacks a shebang and cannot thus be executed. If the file is [ 81s] meant to be an executable script, add the shebang, otherwise remove the [ 81s] executable bits or move the file elsewhere. [ 81s] [ 81s] dracut.i686: W: non-executable-script /usr/lib/dracut/modules.d/98pollcdrom/pollcdrom.sh 0644L /bin/sh [ 81s] dracut.i686: W: non-executable-script /usr/lib/dracut/modules.d/91crypt-loop/crypt-loop-lib.sh 0644L /bin/sh [ 81s] dracut.i686: W: non-executable-script /usr/lib/dracut/modules.d/50drm/module-setup.sh 0644L /bin/bash [ 81s] dracut.i686: W: non-executable-script /usr/lib/dracut/modules.d/99base/wait-host-devs.sh 0644L /bin/sh [ 81s] dracut.i686: W: non-executable-script /usr/lib/dracut/modules.d/95udev-rules/udev-rules-prepare.sh 0644L /bin/sh [ 81s] dracut-network.i686: W: non-executable-script /usr/lib/dracut/modules.d/40network/net-lib.sh 0644L /bin/sh [ 81s] dracut-network.i686: W: non-executable-script /usr/lib/dracut/modules.d/40network/parse-vlan.sh 0644L /bin/sh [ 81s] This text file contains a shebang or is located in a path dedicated for [ 81s] executables, but lacks the executable bits and cannot thus be executed. If [ 81s] the file is meant to be an executable script, add the executable bits, [ 81s] otherwise remove the shebang or move the file elsewhere. [ 81s] [ 81s] dracut.i686: W: missing-dependency-to-logrotate for logrotate script /etc/logrotate.d/dracut_log [ 81s] This package installs a file in /etc/logrotate.d/ but doesn't require [ 81s] logrotate to be installed. Because logrotate is not part of the essential [ 81s] packages, your package should explicitely depend on logrotate to make sure [ 81s] that your logrotate job is executed. If it is an optional feature of your [ 81s] package, recommend or suggest logrotate. [ 81s] [ 81s] dracut.i686: W: incoherent-logrotate-file /etc/logrotate.d/dracut_log [ 81s] Your logrotate file should be named /etc/logrotate.d/. [ 81s] [ 81s] dracut.i686: W: ghost-files-without-postin [ 81s] dracut-caps.i686: W: explicit-lib-dependency libcap [ 81s] You must let rpm find the library dependencies by itself. Do not put unneeded [ 81s] explicit Requires: tags. [ 81s] [ 81s] 5 packages and 0 specfiles checked; 0 errors, 13 warnings. [ 81s] [ 81s] ... creating baselibs [ 81s] ... comparing built packages with the former built [ 81s] /usr/lib/build/rpm-check.sh [ 81s] compare /.build.oldpackages/dracut-025-2.16.src.rpm /home/abuild/rpmbuild/SRPMS/dracut-025-2.17.src.rpm [ 81s] compare /.build.oldpackages/dracut-025-2.16.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-025-2.17.i686.rpm [ 82s] /usr/lib/dracut/dracut-version.sh differs ( ASCII text) [ 82s] --- old//usr/lib/dracut/dracut-version.sh 2013-08-16 18:05:03.000000000 +0000 [ 82s] +++ new//usr/lib/dracut/dracut-version.sh 2013-08-21 00:56:21.000000000 +0000 [ 82s] @@ -1 +1 @@ [ 82s] -DRACUT_VERSION=025-2.16 [ 82s] +DRACUT_VERSION=025-2.17 [ 82s] compare /.build.oldpackages/dracut-caps-025-2.16.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-caps-025-2.17.i686.rpm [ 82s] compare /.build.oldpackages/dracut-debuginfo-025-2.16.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-debuginfo-025-2.17.i686.rpm [ 82s] compare /.build.oldpackages/dracut-debugsource-025-2.16.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-debugsource-025-2.17.i686.rpm [ 82s] compare /.build.oldpackages/dracut-network-025-2.16.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-network-025-2.17.i686.rpm [ 82s] compare /.build.oldpackages/dracut-tools-025-2.16.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-tools-025-2.17.i686.rpm [ 83s] comparing /.build.oldpackages/rpmlint.log and /home/abuild/rpmbuild/OTHER/rpmlint.log [ 83s] ... saving built packages [ 83s] /home/abuild/rpmbuild/RPMS/i686/dracut-025-2.17.i686.rpm [ 83s] /home/abuild/rpmbuild/RPMS/i686/dracut-caps-025-2.17.i686.rpm [ 83s] /home/abuild/rpmbuild/RPMS/i686/dracut-debuginfo-025-2.17.i686.rpm [ 83s] /home/abuild/rpmbuild/RPMS/i686/dracut-debugsource-025-2.17.i686.rpm [ 83s] /home/abuild/rpmbuild/RPMS/i686/dracut-network-025-2.17.i686.rpm [ 83s] /home/abuild/rpmbuild/RPMS/i686/dracut-tools-025-2.17.i686.rpm [ 83s] /home/abuild/rpmbuild/SRPMS/dracut-025-2.17.src.rpm [ 83s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 83s] [ 83s] w06 finished "build dracut.spec" at Wed Aug 21 00:56:32 UTC 2013. [ 83s] [ 86s] [ 78.865079] SysRq : Power Off [ 87s] [ 80.314094] Power down. [ 88s] build: extracting built packages... [ 88s] dracut-025-2.17.i686.rpm [ 88s] dracut-caps-025-2.17.i686.rpm [ 88s] dracut-debuginfo-025-2.17.i686.rpm [ 88s] dracut-debugsource-025-2.17.i686.rpm [ 88s] dracut-network-025-2.17.i686.rpm [ 88s] dracut-tools-025-2.17.i686.rpm [ 88s] dracut-025-2.17.src.rpm [ 88s] rpmlint.log