[ 0s] Using BUILD_ROOT=/srv/build/root_1/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_1/root [ 0s] [ 0s] [ 0s] w07 started "build epson-inkjet-printer-escpr.spec" at Fri Aug 2 21:36:30 UTC 2013. [ 0s] [ 0s] Building epson-inkjet-printer-escpr for project 'Tizen' repository 'standard' arch 'i586' srcmd5 'ac47d11c0a759038a484cb3681a8aa84' [ 0s] [ 0s] processing specfile /srv/build/root_1/.build-srcdir/epson-inkjet-printer-escpr.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_1/.build-srcdir/epson-inkjet-printer-escpr.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_1/.build.rpmlist /srv/build/root_1/.build-srcdir/epson-inkjet-printer-escpr.spec build rpmlint-Factory ... [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/34] preinstalling libmagic-data... [ 1s] [2/34] preinstalling setup... [ 1s] [3/34] preinstalling filesystem... [ 1s] [4/34] preinstalling glibc... [ 1s] [5/34] preinstalling bash... [ 1s] [6/34] preinstalling diffutils... [ 1s] [7/34] preinstalling grep... [ 1s] [8/34] preinstalling libattr... [ 1s] [9/34] preinstalling libbz2... [ 1s] [10/34] preinstalling libcap... [ 1s] [11/34] preinstalling libelf... [ 1s] [12/34] preinstalling libfreebl3... [ 1s] [13/34] preinstalling liblua... [ 1s] [14/34] preinstalling liblzma... [ 1s] [15/34] preinstalling libncurses... [ 1s] [16/34] preinstalling libpopt... [ 1s] [17/34] preinstalling libsmack... [ 1s] [18/34] preinstalling libsqlite... [ 1s] [19/34] preinstalling nspr... [ 1s] [20/34] preinstalling sed... [ 1s] [21/34] preinstalling tar... [ 1s] [22/34] preinstalling zlib... [ 1s] [23/34] preinstalling libacl... [ 1s] [24/34] preinstalling libgcc47... [ 1s] [25/34] preinstalling libreadline... [ 1s] [26/34] preinstalling smack... [ 1s] [27/34] preinstalling bzip2... [ 1s] [28/34] preinstalling libmagic... [ 1s] [29/34] preinstalling libxml2... [ 2s] [30/34] preinstalling coreutils... [ 2s] [31/34] preinstalling nss... [ 2s] [32/34] preinstalling libsoftokn3... [ 2s] [33/34] preinstalling rpm... [ 2s] [34/34] preinstalling rpm-security-plugin... [ 2s] [ 2s] [1/8] preinstalling libext2fs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling perl... [ 3s] [5/8] preinstalling grep... [ 3s] [6/8] preinstalling libblkid... [ 3s] [7/8] preinstalling libmount... [ 3s] [8/8] preinstalling util-linux... [ 3s] copying packages... [ 3s] reordering...cycle: coreutils -> pam [ 3s] breaking dependency pam -> coreutils [ 3s] cycle: nss -> libsoftokn3 [ 3s] breaking dependency nss -> libsoftokn3 [ 3s] done [ 4s] booting kvm ... [ 4s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -net none -cpu host -kernel /srv/kernel/vmlinuz -initrd /srv/kernel/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm -m 8192 -drive file=/srv/build/root_1/root,if=virtio,cache=unsafe -drive file=/srv/build/root_1/root,if=ide,index=0,cache=unsafe -drive file=/srv/build/root_1/swap,if=virtio,cache=unsafe -smp 4 [ 5s]  [ 5s] Google, Inc. [ 5s] Serial Graphics Adapter 09/05/12 [ 5s] SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (abuild@build24) Wed Sep 5 14:01:11 UTC 2012 [ 5s] 4 0 [ 5s]  SeaBIOS (version 1.6.3-20120905_140109) [ 5s] [ 5s] Booting from ROM... [ 8s] doing fast boot [ 8s] Creating device nodes with udev [ 8s] udevd[220]: failed to execute '/etc/sysconfig/network/scripts/ifup-sysctl' '/etc/sysconfig/network/scripts/ifup-sysctl lo -o hotplug': No such file or directory [ 8s] [ 8s] Waiting for device /dev/vda to appear: ok [ 8s] fsck from util-linux 2.20.1 [ 8s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 8s] /dev/vda: clean, 5166/2097152 files, 180673/8388608 blocks [ 8s] fsck succeeded. Mounting root device read-write. [ 8s] Mounting root /dev/vda [ 8s] mount -o rw,noatime,acl,user_xattr -t ext4 /dev/vda /root [ 8s] replacing /etc/mtab with symlink to /proc/self/mounts [ 9s] sh: /sbin/modprobe: No such file or directory [ 9s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 8: interpreter '/usr/bin/qemu-arm-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 9: interpreter '/usr/bin/qemu-armeb-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 10: interpreter '/usr/bin/qemu-ppc-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 11: interpreter '/usr/bin/qemu-mips-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 12: interpreter '/usr/bin/qemu-mipsel-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 18: interpreter '/usr/bin/qemu-sh4-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 19: interpreter '/usr/bin/qemu-sh4eb-binfmt' not found, ignoring [ 9s] 2nd stage started in virtual machine [ 9s] machine type: x86_64 [ 9s] switching personality to 8... [ 9s] 2nd stage started in virtual machine [ 9s] machine type: i686 [ 9s] [ 1.829880] EXT4-fs (vda): Cannot change data mode on remount [ 9s] mount: / not mounted or bad option [ 9s] In some cases useful info is found in syslog - try [ 9s] dmesg | tail or so [ 9s] swapon /dev/vdb [ 9s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 9s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 9s] *********************************** [ 9s] VM_TYPE: kvm script: /.build/build [ 9s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 9s] mount: none is already mounted or /proc busy [ 9s] mount: none is already mounted or /dev/pts busy [ 9s] logging output to //.build.log... [ 9s] processing specfile /.build-srcdir/epson-inkjet-printer-escpr.spec ... [ 9s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/epson-inkjet-printer-escpr.spec build rpmlint-Factory ... [ 9s] running setup postinstall script [ 9s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 9s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 9s] initializing rpm db... [ 9s] [1/119] installing hwdata-0.234-2.8 [ 9s] [2/119] installing libmagic-data-5.11-2.10 [ 9s] [3/119] installing setup-0.9-3.8 [ 9s] [4/119] installing terminfo-base-5.9-2.9 [ 9s] [5/119] installing filesystem-3.1-5.1 [ 9s] error: Failed to set SMACK64 _ for /proc: Operation not supported [ 9s] [6/119] installing glibc-2.17-4.2 [ 10s] [7/119] installing bash-4.2-3.8 [ 10s] [8/119] installing cpio-2.11-4.8 [ 10s] [9/119] installing diffutils-3.2-2.8 [ 10s] [10/119] installing findutils-4.5.10-2.10 [ 10s] [11/119] installing hostname-3.12-2.8 [ 10s] [12/119] installing libattr-2.4.46-2.12 [ 10s] [13/119] installing libbz2-1.0.6-2.24 [ 10s] [14/119] installing libcap-2.22-2.24 [ 10s] [15/119] installing libdbus-1.6.12-3.9 [ 10s] [16/119] installing libelf-0.155-2.5 [ 10s] [17/119] installing libexpat-2.1.0-2.10 [ 10s] [18/119] installing libext2fs-1.42.6-2.12 [ 10s] [19/119] installing libfreebl3-3.13.6-2.38 [ 10s] [20/119] installing libgdbm-1.10-2.12 [ 10s] [21/119] installing libgmp-5.0.5-2.9 [ 10s] [22/119] installing libgpg-error-1.10-2.8 [ 10s] [23/119] installing libjpeg-8.0.2-3.13 [ 10s] [24/119] installing libltdl-2.4.2-2.2 [ 10s] [25/119] installing liblua-5.1.4-2.9 [ 11s] [26/119] installing liblzma-5.0.3-2.10 [ 11s] [27/119] installing libpcre-8.31-2.10 [ 11s] [28/119] installing libpopt-1.16-2.10 [ 11s] [29/119] installing libsmack-1.0-4.15 [ 11s] [30/119] installing libsqlite-3.7.14-2.10 [ 11s] [31/119] installing libuuid-2.22.2-2.12 [ 11s] [32/119] installing m4-1.4.16-2.10 [ 11s] [33/119] installing net-tools-2.0_20121208git-2.11 [ 11s] [34/119] installing nspr-4.9.2-2.14 [ 11s] [35/119] installing patch-2.7-1.6 [ 11s] [36/119] installing pkg-config-0.28-2.10 [ 11s] [37/119] installing sed-4.2.1-2.10 [ 11s] [38/119] installing tar-1.26-2.10 [ 11s] [39/119] installing update-alternatives-1.16.3-2.4 [ 11s] [40/119] installing which-2.20-5.10 [ 11s] [41/119] installing zlib-1.2.7-2.10 [ 11s] [42/119] installing libncurses-5.9-2.9 [ 11s] [43/119] installing build-compare-2012.01.26-2.15 [ 11s] [44/119] installing libjpeg-devel-8.0.2-3.13 [ 12s] [45/119] installing gawk-4.0.1-2.9 [ 12s] [46/119] installing grep-2.14-3.10 [ 12s] [47/119] installing less-451-6.11 [ 12s] [48/119] installing libacl-2.2.51-3.10 [ 12s] [49/119] installing libasm-0.155-2.5 [ 12s] [50/119] installing libblkid-2.22.2-2.12 [ 12s] [51/119] installing libgcc47-4.7.2-2.21 [ 12s] [52/119] installing libgcrypt-1.5.0-2.9 [ 12s] [53/119] installing libgomp47-4.7.2-2.21 [ 12s] [54/119] installing libmpfr-3.1.1-2.9 [ 12s] [55/119] installing libopenssl-1.0.1c-2.7 [ 12s] [56/119] installing libpng-1.2.50-2.10 [ 12s] [57/119] installing libreadline-5.2-2.10 [ 12s] [58/119] installing make-3.82-3.10 [ 12s] [59/119] installing nss-certs-3.13.6-2.38 [ 13s] [60/119] installing smack-1.0-4.15 [ 13s] [61/119] installing bzip2-1.0.6-2.24 [ 13s] [62/119] installing libkmod-12-2.11 [ 13s] [63/119] installing libmagic-5.11-2.10 [ 13s] [64/119] installing libxml2-2.8.0-2.9 [ 13s] [65/119] installing xz-5.0.3-2.10 [ 13s] [66/119] installing binutils-2.23.1-4.7 [ 15s] update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode. [ 15s] [67/119] installing libdw-0.155-2.5 [ 15s] [68/119] installing file-5.11-2.10 [ 15s] [69/119] installing openssl-1.0.1c-2.7 [ 15s] [70/119] installing libmount-2.22.2-2.12 [ 15s] [71/119] installing libmpc-1.0-2.8 [ 15s] [72/119] installing libstdc++47-4.7.2-2.21 [ 15s] [73/119] installing db4-4.8.30.NC-2.10 [ 16s] [74/119] installing libgmpxx-5.0.5-2.9 [ 16s] [75/119] installing elfutils-0.155-2.5 [ 16s] [76/119] installing libtiff-4.0.2-2.10 [ 16s] [77/119] installing libppl-0.11.2-2.15 [ 16s] [78/119] installing perl-5.16.3-2.19 [ 26s] [79/119] installing cups-libs-1.5.3-3.10 [ 27s] [80/119] installing build-mkbaselibs-20120927-2.8 [ 27s] [81/119] installing autoconf-2.69-2.7 [ 27s] [82/119] installing libppl_c-0.11.2-2.15 [ 27s] [83/119] installing libcloog-0.15.10-2.8 [ 27s] [84/119] installing build-20120927-2.8 [ 27s] [85/119] installing cpp47-4.7.2-2.21 [ 28s] [86/119] installing cpp-4.7-2.2 [ 28s] [87/119] installing pam-1.1.6-4.1 [ 28s] [88/119] installing nss-3.13.6-2.38 [ 28s] [89/119] installing pam-devel-1.1.6-4.1 [ 28s] [90/119] installing pwdutils-3.2.19-2.4 [ 28s] [91/119] installing libsoftokn3-3.13.6-2.38 [ 28s] [92/119] installing coreutils-8.21-4.9 [ 28s] [93/119] installing libsystemd-204-3.1 [ 34s] [94/119] installing util-linux-2.22.2-2.12 [ 38s] [95/119] installing rpm-4.11.0.1-3.14 [ 38s] [96/119] installing linux-glibc-devel-3.4.0-2.6 [ 48s] [97/119] installing gzip-1.5-2.10 [ 48s] [98/119] installing automake-1.12.1-2.7 [ 55s] [99/119] installing tzdata-2012e-2.8 [ 56s] [100/119] installing dbus-1.6.12-3.9 [ 56s] [101/119] installing rpmlint-mini-1.4-3.10 [ 56s] [102/119] installing rpm-security-plugin-4.11.0.1-3.14 [ 56s] warning: /etc/device-sec-policy created as /etc/device-sec-policy.rpmnew [ 56s] [103/119] installing rpmlint-tizen-1.0-8.1 [ 56s] [104/119] installing glibc-devel-2.17-4.2 [ 57s] [105/119] installing libtool-2.4.2-2.2 [ 57s] [106/119] installing systemd-204-3.1 [ 58s] [107/119] installing libstdc++47-devel-4.7.2-2.21 [ 66s] [108/119] installing systemd-devel-204-3.1 [ 66s] [109/119] installing zlib-devel-1.2.7-2.10 [ 66s] [110/119] installing gcc47-4.7.2-2.21 [ 72s] [111/119] installing libstdc++-devel-4.7-2.2 [ 72s] [112/119] installing gcc-4.7-2.2 [ 72s] [113/119] installing libopenssl-devel-1.0.1c-2.7 [ 73s] [114/119] installing libpng-devel-1.2.50-2.10 [ 73s] [115/119] installing gcc47-c++-4.7.2-2.21 [ 73s] [116/119] installing gcc-c++-4.7-2.2 [ 73s] [117/119] installing libtiff-devel-4.0.2-2.10 [ 73s] [118/119] installing rpm-build-4.11.0.1-3.14 [ 73s] [119/119] installing cups-devel-1.5.3-3.10 [ 73s] removing nis flags from //etc/nsswitch.conf... [ 73s] now finalizing build dir... [ 74s] build target is i686-tizen-linux [ 74s] ----------------------------------------------------------------- [ 74s] I have the following modifications for epson-inkjet-printer-escpr.spec: [ 74s] 25c25 [ 74s] < Release: 3 [ 74s] --- [ 74s] > Release: 4.6 [ 74s] ----------------------------------------------------------------- [ 74s] ----- building epson-inkjet-printer-escpr.spec (user abuild) [ 74s] ----------------------------------------------------------------- [ 74s] ----------------------------------------------------------------- [ 74s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen/standard/ac47d11c0a759038a484cb3681a8aa84-epson-inkjet-printer-escpr' /home/abuild/rpmbuild/SOURCES/epson-inkjet-printer-escpr.spec [ 74s] Building target platforms: i686-tizen-linux [ 74s] Building for target i686-tizen-linux [ 74s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.DaQAXy [ 74s] + umask 022 [ 74s] + cd /home/abuild/rpmbuild/BUILD [ 74s] + cd /home/abuild/rpmbuild/BUILD [ 74s] + rm -rf epson-inkjet-printer-escpr-1.2.2 [ 74s] + /bin/tar -xf - [ 74s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/epson-inkjet-printer-escpr-1.2.2.tar.gz [ 74s] + STATUS=0 [ 74s] + '[' 0 -ne 0 ']' [ 74s] + cd epson-inkjet-printer-escpr-1.2.2 [ 74s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 74s] + echo 'Patch #0 (tizen_bugfix.patch):' [ 74s] Patch #0 (tizen_bugfix.patch): [ 74s] + /bin/cat /home/abuild/rpmbuild/SOURCES/tizen_bugfix.patch [ 74s] + /bin/patch -p1 --fuzz=2 [ 74s] patching file src/filter.c [ 74s] patching file src/wrapper.c [ 74s] + echo 'Patch #1 (tizen_add_job_media_progress.patch):' [ 74s] Patch #1 (tizen_add_job_media_progress.patch): [ 74s] + /bin/patch -p1 --fuzz=2 [ 74s] + /bin/cat /home/abuild/rpmbuild/SOURCES/tizen_add_job_media_progress.patch [ 74s] patching file src/wrapper.c [ 74s] Hunk #1 succeeded at 235 with fuzz 2 (offset 4 lines). [ 74s] + echo 'Patch #2 (tizen_report_page_info.patch):' [ 74s] Patch #2 (tizen_report_page_info.patch): [ 74s] + /bin/cat /home/abuild/rpmbuild/SOURCES/tizen_report_page_info.patch [ 74s] + /bin/patch -p1 --fuzz=2 [ 74s] patching file src/wrapper.c [ 74s] + exit 0 [ 74s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.64a6yQ [ 74s] + umask 022 [ 74s] + cd /home/abuild/rpmbuild/BUILD [ 74s] + cd epson-inkjet-printer-escpr-1.2.2 [ 74s] + LANG=C [ 74s] + export LANG [ 74s] + unset DISPLAY [ 74s] + CFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [ 74s] + export CFLAGS [ 74s] + CXXFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [ 74s] + export CXXFLAGS [ 74s] + FFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -I%_fmoddir' [ 74s] + export FFLAGS [ 74s] + LD_AS_NEEDED=1 [ 74s] + export LD_AS_NEEDED [ 74s] + CFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [ 74s] + export CFLAGS [ 74s] + CXXFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [ 74s] + export CXXFLAGS [ 74s] + FFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -I%_fmoddir' [ 74s] + export FFLAGS [ 74s] + ./configure --build=i686-tizen-linux-gnu --host=i686-tizen-linux-gnu --target=i686-tizen-linux --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --with-cupsfilterdir=/usr/lib/cups/filter --with-cupsppddir=/opt/etc/cups/ppd/Epson --disable-static [ 74s] checking for a BSD-compatible install... /usr/bin/install -c [ 75s] checking whether build environment is sane... yes [ 75s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 75s] checking for gawk... gawk [ 75s] checking whether make sets $(MAKE)... yes [ 75s] checking for i686-tizen-linux-gnu-gcc... no [ 75s] checking for gcc... gcc [ 75s] checking whether the C compiler works... yes [ 75s] checking for C compiler default output file name... a.out [ 75s] checking for suffix of executables... [ 75s] checking whether we are cross compiling... no [ 75s] checking for suffix of object files... o [ 75s] checking whether we are using the GNU C compiler... yes [ 76s] checking whether gcc accepts -g... yes [ 76s] checking for gcc option to accept ISO C89... none needed [ 76s] checking for style of include used by make... GNU [ 76s] checking dependency style of gcc... gcc3 [ 76s] checking for an ANSI C-conforming const... yes [ 76s] checking how to run the C preprocessor... gcc -E [ 76s] checking whether ln -s works... yes [ 76s] checking build system type... i686-tizen-linux-gnu [ 76s] checking host system type... i686-tizen-linux-gnu [ 76s] checking for a sed that does not truncate output... /usr/bin/sed [ 76s] checking for grep that handles long lines and -e... /usr/bin/grep [ 76s] checking for egrep... /usr/bin/grep -E [ 76s] checking for fgrep... /usr/bin/grep -F [ 76s] checking for ld used by gcc... /usr/i586-tizen-linux/bin/ld [ 76s] checking if the linker (/usr/i586-tizen-linux/bin/ld) is GNU ld... yes [ 76s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 76s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 76s] checking the maximum length of command line arguments... 1572864 [ 76s] checking whether the shell understands some XSI constructs... yes [ 76s] checking whether the shell understands "+="... yes [ 76s] checking for /usr/i586-tizen-linux/bin/ld option to reload object files... -r [ 76s] checking for i686-tizen-linux-gnu-objdump... no [ 76s] checking for objdump... objdump [ 76s] checking how to recognize dependent libraries... pass_all [ 76s] checking for i686-tizen-linux-gnu-ar... no [ 76s] checking for ar... ar [ 76s] checking for i686-tizen-linux-gnu-strip... no [ 76s] checking for strip... strip [ 76s] checking for i686-tizen-linux-gnu-ranlib... no [ 76s] checking for ranlib... ranlib [ 76s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 76s] checking for ANSI C header files... yes [ 76s] checking for sys/types.h... yes [ 76s] checking for sys/stat.h... yes [ 76s] checking for stdlib.h... yes [ 76s] checking for string.h... yes [ 76s] checking for memory.h... yes [ 76s] checking for strings.h... yes [ 76s] checking for inttypes.h... yes [ 76s] checking for stdint.h... yes [ 76s] checking for unistd.h... yes [ 76s] checking for dlfcn.h... yes [ 76s] checking for objdir... .libs [ 76s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 76s] checking for gcc option to produce PIC... -fPIC -DPIC [ 76s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 76s] checking if gcc static flag -static works... no [ 76s] checking if gcc supports -c -o file.o... yes [ 76s] checking if gcc supports -c -o file.o... (cached) yes [ 76s] checking whether the gcc linker (/usr/i586-tizen-linux/bin/ld) supports shared libraries... yes [ 76s] checking whether -lc should be explicitly linked in... no [ 77s] checking dynamic linker characteristics... GNU/Linux ld.so [ 77s] checking how to hardcode library paths into programs... immediate [ 77s] checking whether stripping libraries is possible... yes [ 77s] checking if libtool supports shared libraries... yes [ 77s] checking whether to build shared libraries... yes [ 77s] checking whether to build static libraries... no [ 77s] checking whether gcc and cc understand -c and -o together... yes [ 77s] checking for cups-config... yes [ 77s] checking for ANSI C header files... (cached) yes [ 77s] checking whether stat file-mode macros are broken... no [ 77s] checking whether time.h and sys/time.h may both be included... yes [ 77s] checking whether struct tm is in sys/time.h or time.h... time.h [ 77s] checking for pid_t... yes [ 77s] checking for size_t... yes [ 77s] checking cups/cups.h usability... yes [ 77s] checking cups/cups.h presence... yes [ 77s] checking for cups/cups.h... yes [ 77s] checking cups/ppd.h usability... yes [ 77s] checking cups/ppd.h presence... yes [ 77s] checking for cups/ppd.h... yes [ 77s] checking cups/raster.h usability... yes [ 77s] checking cups/raster.h presence... yes [ 77s] checking for cups/raster.h... yes [ 77s] checking ctype.h usability... yes [ 77s] checking ctype.h presence... yes [ 77s] checking for ctype.h... yes [ 77s] checking errno.h usability... yes [ 77s] checking errno.h presence... yes [ 77s] checking for errno.h... yes [ 77s] checking fcntl.h usability... yes [ 77s] checking fcntl.h presence... yes [ 77s] checking for fcntl.h... yes [ 77s] checking malloc.h usability... yes [ 77s] checking malloc.h presence... yes [ 77s] checking for malloc.h... yes [ 77s] checking signal.h usability... yes [ 77s] checking signal.h presence... yes [ 77s] checking for signal.h... yes [ 77s] checking stdarg.h usability... yes [ 77s] checking stdarg.h presence... yes [ 77s] checking for stdarg.h... yes [ 78s] checking stddef.h usability... yes [ 78s] checking stddef.h presence... yes [ 78s] checking for stddef.h... yes [ 78s] checking for stdlib.h... (cached) yes [ 78s] checking for string.h... (cached) yes [ 78s] checking for sys/stat.h... (cached) yes [ 78s] checking for sys/types.h... (cached) yes [ 78s] checking time.h usability... yes [ 78s] checking time.h presence... yes [ 78s] checking for time.h... yes [ 78s] checking for unistd.h... (cached) yes [ 78s] checking for ppdOpenFile in -lcups... yes [ 78s] checking for cupsRasterOpen in -lcupsimage... yes [ 78s] checking for stdlib.h... (cached) yes [ 78s] checking for GNU libc compatible malloc... yes [ 78s] checking for working memcmp... yes [ 78s] checking return type of signal handlers... void [ 78s] checking for memset... yes [ 78s] checking for strcspn... yes [ 78s] checking for strerror... yes [ 78s] checking for strrchr... yes [ 78s] configure: creating ./config.status [ 79s] config.status: creating Makefile [ 79s] config.status: creating epson-inkjet-printer-escpr.spec [ 79s] config.status: creating lsb/lsb-rpm.spec [ 79s] config.status: creating lib/Makefile [ 79s] config.status: creating ppd/Makefile [ 79s] config.status: creating src/Makefile [ 79s] config.status: creating config.h [ 79s] config.status: executing depfiles commands [ 79s] config.status: executing libtool commands [ 79s] + make [ 79s] make all-recursive [ 79s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2' [ 79s] Making all in lib [ 79s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/lib' [ 79s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpr_la-epson-cbt.lo -MD -MP -MF .deps/libescpr_la-epson-cbt.Tpo -c -o libescpr_la-epson-cbt.lo `test -f 'epson-cbt.c' || echo './'`epson-cbt.c [ 79s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpr_la-epson-cbt.lo -MD -MP -MF .deps/libescpr_la-epson-cbt.Tpo -c epson-cbt.c -fPIC -DPIC -o .libs/libescpr_la-epson-cbt.o [ 79s] epson-cbt.c: In function 'commClose': [ 79s] epson-cbt.c:654:15: warning: variable 'closePtlState' set but not used [-Wunused-but-set-variable] [ 79s] mv -f .deps/libescpr_la-epson-cbt.Tpo .deps/libescpr_la-epson-cbt.Plo [ 79s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpr_la-epson-escpage.lo -MD -MP -MF .deps/libescpr_la-epson-escpage.Tpo -c -o libescpr_la-epson-escpage.lo `test -f 'epson-escpage.c' || echo './'`epson-escpage.c [ 79s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpr_la-epson-escpage.lo -MD -MP -MF .deps/libescpr_la-epson-escpage.Tpo -c epson-escpage.c -fPIC -DPIC -o .libs/libescpr_la-epson-escpage.o [ 80s] mv -f .deps/libescpr_la-epson-escpage.Tpo .deps/libescpr_la-epson-escpage.Plo [ 80s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpr_la-epson-escpage-color.lo -MD -MP -MF .deps/libescpr_la-epson-escpage-color.Tpo -c -o libescpr_la-epson-escpage-color.lo `test -f 'epson-escpage-color.c' || echo './'`epson-escpage-color.c [ 80s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpr_la-epson-escpage-color.lo -MD -MP -MF .deps/libescpr_la-epson-escpage-color.Tpo -c epson-escpage-color.c -fPIC -DPIC -o .libs/libescpr_la-epson-escpage-color.o [ 80s] mv -f .deps/libescpr_la-epson-escpage-color.Tpo .deps/libescpr_la-epson-escpage-color.Plo [ 80s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpr_la-epson-escpage-comp.lo -MD -MP -MF .deps/libescpr_la-epson-escpage-comp.Tpo -c -o libescpr_la-epson-escpage-comp.lo `test -f 'epson-escpage-comp.c' || echo './'`epson-escpage-comp.c [ 80s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpr_la-epson-escpage-comp.lo -MD -MP -MF .deps/libescpr_la-epson-escpage-comp.Tpo -c epson-escpage-comp.c -fPIC -DPIC -o .libs/libescpr_la-epson-escpage-comp.o [ 80s] epson-escpage-comp.c:95:6: warning: missing braces around initializer [-Wmissing-braces] [ 80s] epson-escpage-comp.c:95:6: warning: (near initialization for 'HufmanDefTable3[0]') [-Wmissing-braces] [ 80s] mv -f .deps/libescpr_la-epson-escpage-comp.Tpo .deps/libescpr_la-epson-escpage-comp.Plo [ 80s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpr_la-epson-escpage-mono.lo -MD -MP -MF .deps/libescpr_la-epson-escpage-mono.Tpo -c -o libescpr_la-epson-escpage-mono.lo `test -f 'epson-escpage-mono.c' || echo './'`epson-escpage-mono.c [ 80s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpr_la-epson-escpage-mono.lo -MD -MP -MF .deps/libescpr_la-epson-escpage-mono.Tpo -c epson-escpage-mono.c -fPIC -DPIC -o .libs/libescpr_la-epson-escpage-mono.o [ 81s] mv -f .deps/libescpr_la-epson-escpage-mono.Tpo .deps/libescpr_la-epson-escpage-mono.Plo [ 81s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpr_la-epson-escpr-api.lo -MD -MP -MF .deps/libescpr_la-epson-escpr-api.Tpo -c -o libescpr_la-epson-escpr-api.lo `test -f 'epson-escpr-api.c' || echo './'`epson-escpr-api.c [ 81s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpr_la-epson-escpr-api.lo -MD -MP -MF .deps/libescpr_la-epson-escpr-api.Tpo -c epson-escpr-api.c -fPIC -DPIC -o .libs/libescpr_la-epson-escpr-api.o [ 81s] epson-escpr-api.c: In function 'SetupRGBAttrib': [ 81s] epson-escpr-api.c:3759:14: warning: unused variable 'lOffset' [-Wunused-variable] [ 82s] mv -f .deps/libescpr_la-epson-escpr-api.Tpo .deps/libescpr_la-epson-escpr-api.Plo [ 82s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpr_la-epson-escpr-dbg.lo -MD -MP -MF .deps/libescpr_la-epson-escpr-dbg.Tpo -c -o libescpr_la-epson-escpr-dbg.lo `test -f 'epson-escpr-dbg.c' || echo './'`epson-escpr-dbg.c [ 82s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpr_la-epson-escpr-dbg.lo -MD -MP -MF .deps/libescpr_la-epson-escpr-dbg.Tpo -c epson-escpr-dbg.c -fPIC -DPIC -o .libs/libescpr_la-epson-escpr-dbg.o [ 82s] mv -f .deps/libescpr_la-epson-escpr-dbg.Tpo .deps/libescpr_la-epson-escpr-dbg.Plo [ 82s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpr_la-epson-escpr-mem.lo -MD -MP -MF .deps/libescpr_la-epson-escpr-mem.Tpo -c -o libescpr_la-epson-escpr-mem.lo `test -f 'epson-escpr-mem.c' || echo './'`epson-escpr-mem.c [ 82s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpr_la-epson-escpr-mem.lo -MD -MP -MF .deps/libescpr_la-epson-escpr-mem.Tpo -c epson-escpr-mem.c -fPIC -DPIC -o .libs/libescpr_la-epson-escpr-mem.o [ 82s] mv -f .deps/libescpr_la-epson-escpr-mem.Tpo .deps/libescpr_la-epson-escpr-mem.Plo [ 82s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpr_la-epson-escpr-services.lo -MD -MP -MF .deps/libescpr_la-epson-escpr-services.Tpo -c -o libescpr_la-epson-escpr-services.lo `test -f 'epson-escpr-services.c' || echo './'`epson-escpr-services.c [ 82s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpr_la-epson-escpr-services.lo -MD -MP -MF .deps/libescpr_la-epson-escpr-services.Tpo -c epson-escpr-services.c -fPIC -DPIC -o .libs/libescpr_la-epson-escpr-services.o [ 82s] epson-escpr-services.c: In function 'serParseDeviceID': [ 82s] epson-escpr-services.c:341:10: warning: 'k' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 82s] mv -f .deps/libescpr_la-epson-escpr-services.Tpo .deps/libescpr_la-epson-escpr-services.Plo [ 82s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpr_la-epson-layout.lo -MD -MP -MF .deps/libescpr_la-epson-layout.Tpo -c -o libescpr_la-epson-layout.lo `test -f 'epson-layout.c' || echo './'`epson-layout.c [ 82s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpr_la-epson-layout.lo -MD -MP -MF .deps/libescpr_la-epson-layout.Tpo -c epson-layout.c -fPIC -DPIC -o .libs/libescpr_la-epson-layout.o [ 83s] mv -f .deps/libescpr_la-epson-layout.Tpo .deps/libescpr_la-epson-layout.Plo [ 83s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpr_la-epson-net-lpr.lo -MD -MP -MF .deps/libescpr_la-epson-net-lpr.Tpo -c -o libescpr_la-epson-net-lpr.lo `test -f 'epson-net-lpr.c' || echo './'`epson-net-lpr.c [ 83s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpr_la-epson-net-lpr.lo -MD -MP -MF .deps/libescpr_la-epson-net-lpr.Tpo -c epson-net-lpr.c -fPIC -DPIC -o .libs/libescpr_la-epson-net-lpr.o [ 83s] mv -f .deps/libescpr_la-epson-net-lpr.Tpo .deps/libescpr_la-epson-net-lpr.Plo [ 83s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpr_la-epson-net-raw.lo -MD -MP -MF .deps/libescpr_la-epson-net-raw.Tpo -c -o libescpr_la-epson-net-raw.lo `test -f 'epson-net-raw.c' || echo './'`epson-net-raw.c [ 83s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpr_la-epson-net-raw.lo -MD -MP -MF .deps/libescpr_la-epson-net-raw.Tpo -c epson-net-raw.c -fPIC -DPIC -o .libs/libescpr_la-epson-net-raw.o [ 83s] mv -f .deps/libescpr_la-epson-net-raw.Tpo .deps/libescpr_la-epson-net-raw.Plo [ 83s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpr_la-epson-net-snmp.lo -MD -MP -MF .deps/libescpr_la-epson-net-snmp.Tpo -c -o libescpr_la-epson-net-snmp.lo `test -f 'epson-net-snmp.c' || echo './'`epson-net-snmp.c [ 83s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpr_la-epson-net-snmp.lo -MD -MP -MF .deps/libescpr_la-epson-net-snmp.Tpo -c epson-net-snmp.c -fPIC -DPIC -o .libs/libescpr_la-epson-net-snmp.o [ 84s] mv -f .deps/libescpr_la-epson-net-snmp.Tpo .deps/libescpr_la-epson-net-snmp.Plo [ 84s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpr_la-epson-protocol.lo -MD -MP -MF .deps/libescpr_la-epson-protocol.Tpo -c -o libescpr_la-epson-protocol.lo `test -f 'epson-protocol.c' || echo './'`epson-protocol.c [ 84s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpr_la-epson-protocol.lo -MD -MP -MF .deps/libescpr_la-epson-protocol.Tpo -c epson-protocol.c -fPIC -DPIC -o .libs/libescpr_la-epson-protocol.o [ 84s] mv -f .deps/libescpr_la-epson-protocol.Tpo .deps/libescpr_la-epson-protocol.Plo [ 84s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpr_la-epson-usb.lo -MD -MP -MF .deps/libescpr_la-epson-usb.Tpo -c -o libescpr_la-epson-usb.lo `test -f 'epson-usb.c' || echo './'`epson-usb.c [ 84s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpr_la-epson-usb.lo -MD -MP -MF .deps/libescpr_la-epson-usb.Tpo -c epson-usb.c -fPIC -DPIC -o .libs/libescpr_la-epson-usb.o [ 84s] epson-usb.c: In function 'usbResetPrinter': [ 84s] epson-usb.c:670:21: warning: variable 'retBufSize' set but not used [-Wunused-but-set-variable] [ 84s] mv -f .deps/libescpr_la-epson-usb.Tpo .deps/libescpr_la-epson-usb.Plo [ 84s] /bin/sh ../libtool --tag=CC --mode=link gcc -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -O2 -version-info 1:0:0 -o libescpr.la -rpath /usr/lib libescpr_la-epson-cbt.lo libescpr_la-epson-escpage.lo libescpr_la-epson-escpage-color.lo libescpr_la-epson-escpage-comp.lo libescpr_la-epson-escpage-mono.lo libescpr_la-epson-escpr-api.lo libescpr_la-epson-escpr-dbg.lo libescpr_la-epson-escpr-mem.lo libescpr_la-epson-escpr-services.lo libescpr_la-epson-layout.lo libescpr_la-epson-net-lpr.lo libescpr_la-epson-net-raw.lo libescpr_la-epson-net-snmp.lo libescpr_la-epson-protocol.lo libescpr_la-epson-usb.lo -lcupsimage -lcups [ 85s] libtool: link: gcc -shared .libs/libescpr_la-epson-cbt.o .libs/libescpr_la-epson-escpage.o .libs/libescpr_la-epson-escpage-color.o .libs/libescpr_la-epson-escpage-comp.o .libs/libescpr_la-epson-escpage-mono.o .libs/libescpr_la-epson-escpr-api.o .libs/libescpr_la-epson-escpr-dbg.o .libs/libescpr_la-epson-escpr-mem.o .libs/libescpr_la-epson-escpr-services.o .libs/libescpr_la-epson-layout.o .libs/libescpr_la-epson-net-lpr.o .libs/libescpr_la-epson-net-raw.o .libs/libescpr_la-epson-net-snmp.o .libs/libescpr_la-epson-protocol.o .libs/libescpr_la-epson-usb.o -lcupsimage -lcups -m32 -march=i686 -mtune=i686 -Wl,-soname -Wl,libescpr.so.1 -o .libs/libescpr.so.1.0.0 [ 85s] libtool: link: (cd ".libs" && rm -f "libescpr.so.1" && ln -s "libescpr.so.1.0.0" "libescpr.so.1") [ 85s] libtool: link: (cd ".libs" && rm -f "libescpr.so" && ln -s "libescpr.so.1.0.0" "libescpr.so") [ 85s] libtool: link: ( cd ".libs" && rm -f "libescpr.la" && ln -s "../libescpr.la" "libescpr.la" ) [ 85s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/lib' [ 85s] Making all in ppd [ 85s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/ppd' [ 85s] make[2]: Nothing to be done for `all'. [ 85s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/ppd' [ 85s] Making all in src [ 85s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/src' [ 85s] gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DPAPER_PATH=\"/usr/share/epson-inkjet-printer-escpr/paper_list.csv\" -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT epson_escpr-filter.o -MD -MP -MF .deps/epson_escpr-filter.Tpo -c -o epson_escpr-filter.o `test -f 'filter.c' || echo './'`filter.c [ 85s] mv -f .deps/epson_escpr-filter.Tpo .deps/epson_escpr-filter.Po [ 85s] gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DPAPER_PATH=\"/usr/share/epson-inkjet-printer-escpr/paper_list.csv\" -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT epson_escpr-debug.o -MD -MP -MF .deps/epson_escpr-debug.Tpo -c -o epson_escpr-debug.o `test -f 'debug.c' || echo './'`debug.c [ 85s] mv -f .deps/epson_escpr-debug.Tpo .deps/epson_escpr-debug.Po [ 85s] gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DPAPER_PATH=\"/usr/share/epson-inkjet-printer-escpr/paper_list.csv\" -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT epson_escpr-str.o -MD -MP -MF .deps/epson_escpr-str.Tpo -c -o epson_escpr-str.o `test -f 'str.c' || echo './'`str.c [ 85s] mv -f .deps/epson_escpr-str.Tpo .deps/epson_escpr-str.Po [ 85s] gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DPAPER_PATH=\"/usr/share/epson-inkjet-printer-escpr/paper_list.csv\" -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT epson_escpr-err.o -MD -MP -MF .deps/epson_escpr-err.Tpo -c -o epson_escpr-err.o `test -f 'err.c' || echo './'`err.c [ 85s] mv -f .deps/epson_escpr-err.Tpo .deps/epson_escpr-err.Po [ 85s] gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DPAPER_PATH=\"/usr/share/epson-inkjet-printer-escpr/paper_list.csv\" -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT epson_escpr-csv.o -MD -MP -MF .deps/epson_escpr-csv.Tpo -c -o epson_escpr-csv.o `test -f 'csv.c' || echo './'`csv.c [ 85s] mv -f .deps/epson_escpr-csv.Tpo .deps/epson_escpr-csv.Po [ 85s] gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DPAPER_PATH=\"/usr/share/epson-inkjet-printer-escpr/paper_list.csv\" -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT epson_escpr-mem.o -MD -MP -MF .deps/epson_escpr-mem.Tpo -c -o epson_escpr-mem.o `test -f 'mem.c' || echo './'`mem.c [ 85s] mv -f .deps/epson_escpr-mem.Tpo .deps/epson_escpr-mem.Po [ 85s] gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DPAPER_PATH=\"/usr/share/epson-inkjet-printer-escpr/paper_list.csv\" -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT epson_escpr-linux_cmn.o -MD -MP -MF .deps/epson_escpr-linux_cmn.Tpo -c -o epson_escpr-linux_cmn.o `test -f 'linux_cmn.c' || echo './'`linux_cmn.c [ 85s] mv -f .deps/epson_escpr-linux_cmn.Tpo .deps/epson_escpr-linux_cmn.Po [ 85s] /bin/sh ../libtool --tag=CC --mode=link gcc -I../lib -DPAPER_PATH=\"/usr/share/epson-inkjet-printer-escpr/paper_list.csv\" -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -o epson-escpr epson_escpr-filter.o epson_escpr-debug.o epson_escpr-str.o epson_escpr-err.o epson_escpr-csv.o epson_escpr-mem.o epson_escpr-linux_cmn.o ../lib/libescpr.la -lcupsimage -lcups [ 85s] libtool: link: gcc -I../lib -DPAPER_PATH=\"/usr/share/epson-inkjet-printer-escpr/paper_list.csv\" -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -o .libs/epson-escpr epson_escpr-filter.o epson_escpr-debug.o epson_escpr-str.o epson_escpr-err.o epson_escpr-csv.o epson_escpr-mem.o epson_escpr-linux_cmn.o ../lib/.libs/libescpr.so -lcupsimage -lcups [ 85s] gcc -DHAVE_CONFIG_H -I. -I.. -DCUPS_FILTER_NAME=\"epson-escpr\" -DCUPS_FILTER_PATH=\"/usr/lib/cups/filter\" -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT epson_escpr_wrapper-wrapper.o -MD -MP -MF .deps/epson_escpr_wrapper-wrapper.Tpo -c -o epson_escpr_wrapper-wrapper.o `test -f 'wrapper.c' || echo './'`wrapper.c [ 85s] wrapper.c: In function 'main': [ 85s] wrapper.c:187:2: warning: 'cupsRasterReadHeader' is deprecated (declared at /usr/include/cups/raster.h:370) [-Wdeprecated-declarations] [ 86s] mv -f .deps/epson_escpr_wrapper-wrapper.Tpo .deps/epson_escpr_wrapper-wrapper.Po [ 86s] /bin/sh ../libtool --tag=CC --mode=link gcc -DCUPS_FILTER_NAME=\"epson-escpr\" -DCUPS_FILTER_PATH=\"/usr/lib/cups/filter\" -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -o epson-escpr-wrapper epson_escpr_wrapper-wrapper.o -lcupsimage -lcups [ 86s] libtool: link: gcc -DCUPS_FILTER_NAME=\"epson-escpr\" -DCUPS_FILTER_PATH=\"/usr/lib/cups/filter\" -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -o epson-escpr-wrapper epson_escpr_wrapper-wrapper.o -lcupsimage -lcups [ 86s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/src' [ 86s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2' [ 86s] rm -f debian/control debian/control.tmp; \ [ 86s] sed -e 's|[@]PACKAGE_BUGREPORT[@]|Seiko Epson Corporation |' \ [ 86s] -e 's|[@]PACKAGE_NAME[@]|Epson Inkjet Printer Driver (ESC/P-R) for Linux|' \ [ 86s] -e 's|[@]PACKAGE_TARNAME[@]|epson-inkjet-printer-escpr|' \ [ 86s] './debian/control.in' > debian/control.tmp; \ [ 86s] mv debian/control.tmp debian/control [ 86s] rm -f debian/rules debian/rules.tmp; \ [ 86s] sed -e 's|[@]CUPS_FILTER_DIR[@]|/usr/lib/cups/filter|' \ [ 86s] -e 's|[@]CUPS_PPD_DIR[@]|/opt/etc/cups/ppd/Epson|' \ [ 86s] -e 's|[@]PACKAGE_TARNAME[@]|epson-inkjet-printer-escpr|' \ [ 86s] './debian/rules.in' > debian/rules.tmp; \ [ 86s] mv debian/rules.tmp debian/rules; \ [ 86s] chmod +x debian/rules [ 86s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2' [ 86s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2' [ 86s] + exit 0 [ 86s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.sA3wMP [ 86s] + umask 022 [ 86s] + cd /home/abuild/rpmbuild/BUILD [ 86s] + cd epson-inkjet-printer-escpr-1.2.2 [ 86s] + LANG=C [ 86s] + export LANG [ 86s] + unset DISPLAY [ 86s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-4.6.i386 [ 86s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-4.6.i386 [ 86s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-4.6.i386 [ 86s] + make install-strip DESTDIR=/home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-4.6.i386 [ 86s] make INSTALL_PROGRAM="/bin/sh /home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/install-sh -c -s" \ [ 86s] install_sh_PROGRAM="/bin/sh /home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/install-sh -c -s" INSTALL_STRIP_FLAG=-s \ [ 86s] `test -z 'strip' || \ [ 86s] echo "INSTALL_PROGRAM_ENV=STRIPPROG='strip'"` install [ 86s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2' [ 86s] Making install in lib [ 86s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/lib' [ 86s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/lib' [ 86s] test -z "/usr/lib" || /usr/bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-4.6.i386/usr/lib" [ 86s] /bin/sh ../libtool --mode=install /usr/bin/install -c -s libescpr.la '/home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-4.6.i386/usr/lib' [ 86s] libtool: install: /usr/bin/install -c .libs/libescpr.so.1.0.0 /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-4.6.i386/usr/lib/libescpr.so.1.0.0 [ 86s] libtool: install: strip --strip-unneeded /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-4.6.i386/usr/lib/libescpr.so.1.0.0 [ 86s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-4.6.i386/usr/lib && { ln -s -f libescpr.so.1.0.0 libescpr.so.1 || { rm -f libescpr.so.1 && ln -s libescpr.so.1.0.0 libescpr.so.1; }; }) [ 86s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-4.6.i386/usr/lib && { ln -s -f libescpr.so.1.0.0 libescpr.so || { rm -f libescpr.so && ln -s libescpr.so.1.0.0 libescpr.so; }; }) [ 86s] libtool: install: /usr/bin/install -c .libs/libescpr.lai /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-4.6.i386/usr/lib/libescpr.la [ 86s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 86s] make[3]: Nothing to be done for `install-data-am'. [ 86s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/lib' [ 86s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/lib' [ 86s] Making install in ppd [ 86s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/ppd' [ 86s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/ppd' [ 86s] make[3]: Nothing to be done for `install-exec-am'. [ 86s] test -z "/opt/etc/cups/ppd/Epson/epson-inkjet-printer-escpr" || /usr/bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-4.6.i386/opt/etc/cups/ppd/Epson/epson-inkjet-printer-escpr" [ 86s] /usr/bin/install -c -m 644 Epson-Artisan_630-epson-escpr-en.ppd Epson-Artisan_700-epson-escpr-en.ppd Epson-Artisan_710-epson-escpr-en.ppd Epson-Artisan_720-epson-escpr-en.ppd Epson-Artisan_730-epson-escpr-en.ppd Epson-Artisan_800-epson-escpr-en.ppd Epson-Artisan_810-epson-escpr-en.ppd Epson-Artisan_830-epson-escpr-en.ppd Epson-Artisan_837-epson-escpr-en.ppd Epson-Artisan_1430-epson-escpr-en.ppd Epson-E-150-epson-escpr-en.ppd Epson-E-200-epson-escpr-en.ppd Epson-E-300-epson-escpr-en.ppd Epson-E-330-epson-escpr-en.ppd Epson-E-330S-epson-escpr-en.ppd Epson-E-340-epson-escpr-en.ppd Epson-E-350-epson-escpr-en.ppd Epson-E-360_Series-epson-escpr-en.ppd Epson-E-500-epson-escpr-en.ppd Epson-E-520-epson-escpr-en.ppd Epson-E-530-epson-escpr-en.ppd Epson-E-600-epson-escpr-en.ppd Epson-E-700-epson-escpr-en.ppd Epson-E-720-epson-escpr-en.ppd Epson-E-800-epson-escpr-en.ppd Epson-E-810-epson-escpr-en.ppd Epson-E-820-epson-escpr-en.ppd Epson-E-830_Series-epson-escpr-en.ppd Epson-EP-702A-epson-escpr-en.ppd Epson-EP-703A-epson-escpr-en.ppd Epson-EP-704A-epson-escpr-en.ppd Epson-EP-705A_Series-epson-escpr-en.ppd Epson-EP-774A-epson-escpr-en.ppd Epson-EP-775A_Series-epson-escpr-en.ppd Epson-EP-801A-epson-escpr-en.ppd Epson-EP-802A-epson-escpr-en.ppd Epson-EP-803A-epson-escpr-en.ppd Epson-EP-804A-epson-escpr-en.ppd Epson-EP-805A_Series-epson-escpr-en.ppd Epson-EP-901A-epson-escpr-en.ppd '/home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-4.6.i386/opt/etc/cups/ppd/Epson/epson-inkjet-printer-escpr' [ 86s] /usr/bin/install -c -m 644 Epson-EP-901F-epson-escpr-en.ppd Epson-EP-902A-epson-escpr-en.ppd Epson-EP-903A-epson-escpr-en.ppd Epson-EP-903F-epson-escpr-en.ppd Epson-EP-904A-epson-escpr-en.ppd Epson-EP-904F-epson-escpr-en.ppd Epson-EP-905A_Series-epson-escpr-en.ppd Epson-EP-905F_Series-epson-escpr-en.ppd Epson-EP-4004-epson-escpr-en.ppd Epson-K200-epson-escpr-en.ppd Epson-K300-epson-escpr-en.ppd Epson-ME_200-epson-escpr-en.ppd Epson-ME-301_Series-epson-escpr-en.ppd Epson-ME-303_Series-epson-escpr-en.ppd Epson-ME-400_Series-epson-escpr-en.ppd Epson-ME_OFFICE_510-epson-escpr-en.ppd Epson-ME_OFFICE_520-epson-escpr-en.ppd Epson-ME_OFFICE_530-epson-escpr-en.ppd Epson-ME_OFFICE_560W-epson-escpr-en.ppd Epson-ME_OFFICE_570-epson-escpr-en.ppd Epson-ME_Office_600F-epson-escpr-en.ppd Epson-ME_OFFICE_620F-epson-escpr-en.ppd Epson-ME_OFFICE_650FN-epson-escpr-en.ppd Epson-ME_OFFICE_700FW-epson-escpr-en.ppd Epson-ME_OFFICE_900WD-epson-escpr-en.ppd Epson-ME_OFFICE_940FW-epson-escpr-en.ppd Epson-ME_OFFICE_960FWD-epson-escpr-en.ppd Epson-NX230_TX230-epson-escpr-en.ppd Epson-NX430_TX435-epson-escpr-en.ppd Epson-PictureMate_500-epson-escpr-en.ppd Epson-PictureMate_Deluxe-epson-escpr-en.ppd Epson-PictureMate_Express-epson-escpr-en.ppd Epson-PictureMate_PM_200-epson-escpr-en.ppd Epson-PictureMate_PM_210-epson-escpr-en.ppd Epson-PictureMate_PM_215-epson-escpr-en.ppd Epson-PictureMate_PM_225-epson-escpr-en.ppd Epson-PictureMate_PM_235-epson-escpr-en.ppd Epson-PictureMate_PM_240-epson-escpr-en.ppd Epson-PictureMate_PM_245-epson-escpr-en.ppd Epson-PictureMate_PM_250-epson-escpr-en.ppd '/home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-4.6.i386/opt/etc/cups/ppd/Epson/epson-inkjet-printer-escpr' [ 86s] /usr/bin/install -c -m 644 Epson-PictureMate_PM_260-epson-escpr-en.ppd Epson-PictureMate_PM_270-epson-escpr-en.ppd Epson-PictureMate_PM_280-epson-escpr-en.ppd Epson-PictureMate_PM_290-epson-escpr-en.ppd Epson-PictureMate_PM_300-epson-escpr-en.ppd Epson-PictureMate_PM_310-epson-escpr-en.ppd Epson-PM-A750-epson-escpr-en.ppd Epson-PM-A820-epson-escpr-en.ppd Epson-PM-A840-epson-escpr-en.ppd Epson-PM-A840S-epson-escpr-en.ppd Epson-PM-A890-epson-escpr-en.ppd Epson-PM-A920-epson-escpr-en.ppd Epson-PM-A940-epson-escpr-en.ppd Epson-PM-A950-epson-escpr-en.ppd Epson-PM-A970-epson-escpr-en.ppd Epson-PM-D600-epson-escpr-en.ppd Epson-PM-D800-epson-escpr-en.ppd Epson-PM-D870-epson-escpr-en.ppd Epson-PM-G4500-epson-escpr-en.ppd Epson-PM-G850-epson-escpr-en.ppd Epson-PM-T960-epson-escpr-en.ppd Epson-PM-T990-epson-escpr-en.ppd Epson-PX-5V-epson-escpr-en.ppd Epson-PX-7V-epson-escpr-en.ppd Epson-PX-205_Series-epson-escpr-en.ppd Epson-PX-404A-epson-escpr-en.ppd Epson-PX-405A_Series-epson-escpr-en.ppd Epson-PX-434A-epson-escpr-en.ppd Epson-PX-435A_Series-epson-escpr-en.ppd Epson-PX-501A-epson-escpr-en.ppd Epson-PX-502A-epson-escpr-en.ppd Epson-PX-503A-epson-escpr-en.ppd Epson-PX-504A-epson-escpr-en.ppd Epson-PX-505F_Series-epson-escpr-en.ppd Epson-PX-535F_Series-epson-escpr-en.ppd Epson-PX-5600-epson-escpr-en.ppd Epson-PX-601F-epson-escpr-en.ppd Epson-PX-602F-epson-escpr-en.ppd Epson-PX-603F-epson-escpr-en.ppd Epson-PX-605F_Series-epson-escpr-en.ppd '/home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-4.6.i386/opt/etc/cups/ppd/Epson/epson-inkjet-printer-escpr' [ 86s] /usr/bin/install -c -m 644 Epson-PX-673F-epson-escpr-en.ppd Epson-PX-675F_Series-epson-escpr-en.ppd Epson-PX-A620-epson-escpr-en.ppd Epson-PX-A640-epson-escpr-en.ppd Epson-PX-A650-epson-escpr-en.ppd Epson-PX-A720-epson-escpr-en.ppd Epson-PX-A740-epson-escpr-en.ppd Epson-PX-B700-epson-escpr-en.ppd Epson-PX-B750F-epson-escpr-en.ppd Epson-PX-FA700-epson-escpr-en.ppd Epson-PX-G5300-epson-escpr-en.ppd Epson-PX-1600F-epson-escpr-en.ppd Epson-PX-1700F-epson-escpr-en.ppd Epson-Stylus_CX2800-epson-escpr-en.ppd Epson-Stylus_CX2900-epson-escpr-en.ppd Epson-Stylus_CX3700-epson-escpr-en.ppd Epson-Stylus_CX3800-epson-escpr-en.ppd Epson-Stylus_CX3900-epson-escpr-en.ppd Epson-Stylus_CX4200-epson-escpr-en.ppd Epson-Stylus_CX4800-epson-escpr-en.ppd Epson-Stylus_CX4900-epson-escpr-en.ppd Epson-Stylus_CX5000-epson-escpr-en.ppd Epson-Stylus_CX5900-epson-escpr-en.ppd Epson-Stylus_CX6000-epson-escpr-en.ppd Epson-Stylus_CX7300-epson-escpr-en.ppd Epson-Stylus_CX7400-epson-escpr-en.ppd Epson-Stylus_CX7700-epson-escpr-en.ppd Epson-Stylus_CX7800-epson-escpr-en.ppd Epson-Stylus_CX8300-epson-escpr-en.ppd Epson-Stylus_CX8400-epson-escpr-en.ppd Epson-Stylus_CX9300F-epson-escpr-en.ppd Epson-Stylus_CX9400Fax-epson-escpr-en.ppd Epson-Stylus_DX4000-epson-escpr-en.ppd Epson-Stylus_DX4200-epson-escpr-en.ppd Epson-Stylus_DX4800-epson-escpr-en.ppd Epson-Stylus_DX5000-epson-escpr-en.ppd Epson-Stylus_DX7400-epson-escpr-en.ppd Epson-Stylus_DX8400-epson-escpr-en.ppd Epson-Stylus_DX9400F-epson-escpr-en.ppd Epson-Stylus_NX200-epson-escpr-en.ppd '/home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-4.6.i386/opt/etc/cups/ppd/Epson/epson-inkjet-printer-escpr' [ 86s] /usr/bin/install -c -m 644 Epson-Stylus_NX210-epson-escpr-en.ppd Epson-Stylus_NX300-epson-escpr-en.ppd Epson-Stylus_NX400-epson-escpr-en.ppd Epson-Stylus_NX410-epson-escpr-en.ppd Epson-Stylus_NX420-epson-escpr-en.ppd Epson-Stylus_NX510-epson-escpr-en.ppd Epson-Stylus_NX620-epson-escpr-en.ppd Epson-Stylus_Office_BX300F-epson-escpr-en.ppd Epson-Stylus_Office_BX305-epson-escpr-en.ppd Epson-Stylus_Office_BX310FN-epson-escpr-en.ppd Epson-Stylus_Office_BX320FW-epson-escpr-en.ppd Epson-Stylus_Office_BX525WD-epson-escpr-en.ppd Epson-Stylus_Office_BX600FW-epson-escpr-en.ppd Epson-Stylus_Office_BX610FW-epson-escpr-en.ppd Epson-Stylus_Office_BX620FWD-epson-escpr-en.ppd Epson-Stylus_Office_BX925-epson-escpr-en.ppd Epson-Stylus_Office_TX300F-epson-escpr-en.ppd Epson-Stylus_Office_TX320F-epson-escpr-en.ppd Epson-Stylus_Office_TX510FN-epson-escpr-en.ppd Epson-Stylus_Office_TX515FN-epson-escpr-en.ppd Epson-Stylus_Office_TX525FW-epson-escpr-en.ppd Epson-Stylus_Office_TX600FW-epson-escpr-en.ppd Epson-Stylus_Office_TX610FW-epson-escpr-en.ppd Epson-Stylus_Office_TX620FWD-epson-escpr-en.ppd Epson-Stylus_Photo_1400-epson-escpr-en.ppd Epson-Stylus_Photo_1410-epson-escpr-en.ppd Epson-Stylus_Photo_PX650-epson-escpr-en.ppd Epson-Stylus_Photo_PX660-epson-escpr-en.ppd Epson-Stylus_Photo_PX700W-epson-escpr-en.ppd Epson-Stylus_Photo_PX710W-epson-escpr-en.ppd Epson-Stylus_Photo_PX720WD-epson-escpr-en.ppd Epson-Stylus_Photo_PX800FW-epson-escpr-en.ppd Epson-Stylus_Photo_PX810FW-epson-escpr-en.ppd Epson-Stylus_Photo_PX820FWD-epson-escpr-en.ppd Epson-Stylus_Photo_R1900-epson-escpr-en.ppd Epson-Stylus_Photo_R240-epson-escpr-en.ppd Epson-Stylus_Photo_R250-epson-escpr-en.ppd Epson-Stylus_Photo_R260-epson-escpr-en.ppd Epson-Stylus_Photo_R265-epson-escpr-en.ppd Epson-Stylus_Photo_R270-epson-escpr-en.ppd '/home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-4.6.i386/opt/etc/cups/ppd/Epson/epson-inkjet-printer-escpr' [ 86s] /usr/bin/install -c -m 644 Epson-Stylus_Photo_R2880-epson-escpr-en.ppd Epson-Stylus_Photo_R3000-epson-escpr-en.ppd Epson-Stylus_Photo_R340-epson-escpr-en.ppd Epson-Stylus_Photo_R350-epson-escpr-en.ppd Epson-Stylus_Photo_R360-epson-escpr-en.ppd Epson-Stylus_Photo_R380-epson-escpr-en.ppd Epson-Stylus_Photo_R390-epson-escpr-en.ppd Epson-Stylus_Photo_RX520-epson-escpr-en.ppd Epson-Stylus_Photo_RX530-epson-escpr-en.ppd Epson-Stylus_Photo_RX560-epson-escpr-en.ppd Epson-Stylus_Photo_RX580-epson-escpr-en.ppd Epson-Stylus_Photo_RX585-epson-escpr-en.ppd Epson-Stylus_Photo_RX590-epson-escpr-en.ppd Epson-Stylus_Photo_RX595-epson-escpr-en.ppd Epson-Stylus_Photo_RX610-epson-escpr-en.ppd Epson-Stylus_Photo_RX640-epson-escpr-en.ppd Epson-Stylus_Photo_RX650-epson-escpr-en.ppd Epson-Stylus_Photo_RX680-epson-escpr-en.ppd Epson-Stylus_Photo_RX685-epson-escpr-en.ppd Epson-Stylus_Photo_RX690-epson-escpr-en.ppd Epson-Stylus_Photo_TX650-epson-escpr-en.ppd Epson-Stylus_Photo_TX700W-epson-escpr-en.ppd Epson-Stylus_Photo_TX710W-epson-escpr-en.ppd Epson-Stylus_Photo_TX720WD-epson-escpr-en.ppd Epson-Stylus_Photo_TX730-epson-escpr-en.ppd Epson-Stylus_Photo_TX800FW-epson-escpr-en.ppd Epson-Stylus_Photo_TX810FW-epson-escpr-en.ppd Epson-Stylus_Photo_PX730-epson-escpr-en.ppd Epson-Stylus_Photo_PX830-epson-escpr-en.ppd Epson-Stylus_Photo_1430-epson-escpr-en.ppd Epson-Stylus_Photo_1500-epson-escpr-en.ppd Epson-Stylus_Photo_R2000-epson-escpr-en.ppd Epson-Stylus_SX200-epson-escpr-en.ppd Epson-Stylus_SX210-epson-escpr-en.ppd Epson-Stylus_SX218-epson-escpr-en.ppd Epson-Stylus_SX230-epson-escpr-en.ppd Epson-Stylus_SX235-epson-escpr-en.ppd Epson-Stylus_SX400-epson-escpr-en.ppd Epson-Stylus_SX410-epson-escpr-en.ppd Epson-Stylus_SX420W-epson-escpr-en.ppd '/home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-4.6.i386/opt/etc/cups/ppd/Epson/epson-inkjet-printer-escpr' [ 86s] /usr/bin/install -c -m 644 Epson-Stylus_SX430-epson-escpr-en.ppd Epson-Stylus_SX440-epson-escpr-en.ppd Epson-Stylus_SX510W-epson-escpr-en.ppd Epson-Stylus_SX525WD-epson-escpr-en.ppd Epson-Stylus_SX535WD-epson-escpr-en.ppd Epson-Stylus_SX600FW-epson-escpr-en.ppd Epson-Stylus_SX610FW-epson-escpr-en.ppd Epson-Stylus_SX620FW-epson-escpr-en.ppd Epson-Stylus_TX200-epson-escpr-en.ppd Epson-Stylus_TX210-epson-escpr-en.ppd Epson-Stylus_TX220-epson-escpr-en.ppd Epson-Stylus_TX400-epson-escpr-en.ppd Epson-Stylus_TX410-epson-escpr-en.ppd Epson-Stylus_TX420W-epson-escpr-en.ppd Epson-Stylus_TX550W-epson-escpr-en.ppd Epson-Stylus_TX560WD-epson-escpr-en.ppd Epson-Stylus_NX230-epson-escpr-en.ppd Epson-Stylus_NX330-epson-escpr-en.ppd Epson-Stylus_NX430-epson-escpr-en.ppd Epson-Stylus_TX230-epson-escpr-en.ppd Epson-Stylus_TX235-epson-escpr-en.ppd Epson-Stylus_TX430-epson-escpr-en.ppd Epson-Stylus_NX530-epson-escpr-en.ppd Epson-Stylus_NX635-epson-escpr-en.ppd Epson-Stylus_Office_BX305_Plus-epson-escpr-en.ppd Epson-Stylus_Office_BX535WD-epson-escpr-en.ppd Epson-Stylus_Office_BX630FW-epson-escpr-en.ppd Epson-Stylus_Office_BX635FWD-epson-escpr-en.ppd Epson-Stylus_Office_BX935-epson-escpr-en.ppd Epson-TX220_NX220-epson-escpr-en.ppd Epson-TX320_WorkForce320-epson-escpr-en.ppd Epson-TX420_NX420-epson-escpr-en.ppd Epson-TX720_Artisan720-epson-escpr-en.ppd Epson-TX820_Artisan830-epson-escpr-en.ppd Epson-WorkForce_310-epson-escpr-en.ppd Epson-WorkForce_320-epson-escpr-en.ppd Epson-WorkForce_435-epson-escpr-en.ppd Epson-WorkForce_500-epson-escpr-en.ppd Epson-WorkForce_520-epson-escpr-en.ppd Epson-WorkForce_545-epson-escpr-en.ppd '/home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-4.6.i386/opt/etc/cups/ppd/Epson/epson-inkjet-printer-escpr' [ 86s] /usr/bin/install -c -m 644 Epson-WorkForce_600-epson-escpr-en.ppd Epson-WorkForce_610-epson-escpr-en.ppd Epson-WorkForce_620-epson-escpr-en.ppd Epson-WorkForce_630-epson-escpr-en.ppd Epson-WorkForce_645-epson-escpr-en.ppd Epson-WorkForce_840-epson-escpr-en.ppd Epson-WorkForce_845-epson-escpr-en.ppd Epson-WF-2510_Series-epson-escpr-en.ppd Epson-WF-2520_Series-epson-escpr-en.ppd Epson-WF-2530_Series-epson-escpr-en.ppd Epson-WF-2540_Series-epson-escpr-en.ppd Epson-WF-3010_Series-epson-escpr-en.ppd Epson-WF-3520_Series-epson-escpr-en.ppd Epson-WF-3530_Series-epson-escpr-en.ppd Epson-WF-3540_Series-epson-escpr-en.ppd Epson-WP-4010_Series-epson-escpr-en.ppd Epson-WP-4011_Series-epson-escpr-en.ppd Epson-WP-4015_Series-epson-escpr-en.ppd Epson-WP-4020_Series-epson-escpr-en.ppd Epson-WP-4022_Series-epson-escpr-en.ppd Epson-WP-4023_Series-epson-escpr-en.ppd Epson-WP-4025_Series-epson-escpr-en.ppd Epson-WP-4090_Series-epson-escpr-en.ppd Epson-WP-4091_Series-epson-escpr-en.ppd Epson-WP-4092_Series-epson-escpr-en.ppd Epson-WP-4095_Series-epson-escpr-en.ppd Epson-WP-4511_Series-epson-escpr-en.ppd Epson-WP-4515_Series-epson-escpr-en.ppd Epson-WP-4520_Series-epson-escpr-en.ppd Epson-WP-4521_Series-epson-escpr-en.ppd Epson-WP-4525_Series-epson-escpr-en.ppd Epson-WP-4530_Series-epson-escpr-en.ppd Epson-WP-4531_Series-epson-escpr-en.ppd Epson-WP-4532_Series-epson-escpr-en.ppd Epson-WP-4533_Series-epson-escpr-en.ppd Epson-WP-4535_Series-epson-escpr-en.ppd Epson-WP-4540_Series-epson-escpr-en.ppd Epson-WP-4545_Series-epson-escpr-en.ppd Epson-WP-4590_Series-epson-escpr-en.ppd Epson-WP-4592_Series-epson-escpr-en.ppd '/home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-4.6.i386/opt/etc/cups/ppd/Epson/epson-inkjet-printer-escpr' [ 86s] /usr/bin/install -c -m 644 Epson-WP-4595_Series-epson-escpr-en.ppd Epson-WF-7510_Series-epson-escpr-en.ppd Epson-WF-7511_Series-epson-escpr-en.ppd Epson-WF-7515_Series-epson-escpr-en.ppd Epson-WF-7520_Series-epson-escpr-en.ppd Epson-WF-7521_Series-epson-escpr-en.ppd Epson-WF-7525_Series-epson-escpr-en.ppd Epson-XP-200_Series-epson-escpr-en.ppd Epson-XP-201_204_208_Series-epson-escpr-en.ppd Epson-XP-202_203_206_Series-epson-escpr-en.ppd Epson-XP-205_207_Series-epson-escpr-en.ppd Epson-XP-300_Series-epson-escpr-en.ppd Epson-XP-302_303_305_306_Series-epson-escpr-en.ppd Epson-XP-400_Series-epson-escpr-en.ppd Epson-XP-402_403_405_406_Series-epson-escpr-en.ppd Epson-XP-750_Series-epson-escpr-en.ppd Epson-XP-850_Series-epson-escpr-en.ppd '/home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-4.6.i386/opt/etc/cups/ppd/Epson/epson-inkjet-printer-escpr' [ 86s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/ppd' [ 86s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/ppd' [ 86s] Making install in src [ 86s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/src' [ 86s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/src' [ 86s] make[3]: Nothing to be done for `install-exec-am'. [ 86s] test -z "/usr/lib/cups/filter" || /usr/bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-4.6.i386/usr/lib/cups/filter" [ 86s] STRIPPROG='strip' /bin/sh ../libtool --mode=install /bin/sh /home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/install-sh -c -s epson-escpr epson-escpr-wrapper '/home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-4.6.i386/usr/lib/cups/filter' [ 86s] libtool: install: warning: `../lib/libescpr.la' has not been installed in `/usr/lib' [ 86s] libtool: install: /bin/sh /home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/install-sh -c -s .libs/epson-escpr /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-4.6.i386/usr/lib/cups/filter/epson-escpr [ 86s] libtool: install: /bin/sh /home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/install-sh -c -s epson-escpr-wrapper /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-4.6.i386/usr/lib/cups/filter/epson-escpr-wrapper [ 86s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/src' [ 86s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/src' [ 86s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2' [ 86s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2' [ 86s] make[3]: Nothing to be done for `install-exec-am'. [ 86s] make[3]: Nothing to be done for `install-data-am'. [ 86s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2' [ 86s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2' [ 86s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2' [ 86s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-4.6.i386/usr/share/license [ 86s] + cp /home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/COPYING /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-4.6.i386/usr/share/license/epson-inkjet-printer-escpr [ 86s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2 [ 86s] WARNING: /usr/lib/cups/filter/epson-escpr is already stripped! [ 86s] WARNING: /usr/lib/cups/filter/epson-escpr-wrapper is already stripped! [ 86s] WARNING: /usr/lib/libescpr.so.1.0.0 is already stripped! [ 86s] + /usr/lib/rpm/brp-compress [ 86s] + /usr/lib/rpm/brp-tizen [ 86s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-4.6.i386 [ 86s] Processing files: epson-inkjet-printer-escpr-1.2.2-4.6.i686 [ 86s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJtb2JpbGVwcmlu [ 86s] dCIvPgoJPC9yZXF1ZXN0PgoJPGFzc2lnbj4KCQk8ZmlsZXN5c3RlbSBwYXRoPSIv [ 86s] dXNyL2xpYi9saWJlc2Nwci5zbyIgbGFiZWw9Il8iIGV4ZWNfbGFiZWw9Il8iIC8+ [ 86s] CgkJPGZpbGVzeXN0ZW0gcGF0aD0iL3Vzci9saWIvbGliZXNjcHIuc28uMSIgbGFi [ 86s] ZWw9Il8iIGV4ZWNfbGFiZWw9Il8iIC8+CgkJPGZpbGVzeXN0ZW0gcGF0aD0iL3Vz [ 86s] ci9saWIvbGliZXNjcHIuc28uMS4wLjAiIGxhYmVsPSJfIiBleGVjX2xhYmVsPSJf [ 86s] IiAvPgoJPC9hc3NpZ24+CjwvbWFuaWZlc3Q+Cg== [ 86s] [ 86s] Provides: epson-inkjet-printer-escpr = 1.2.2-4.6 epson-inkjet-printer-escpr(x86-32) = 1.2.2-4.6 libescpr.so.1 [ 86s] Requires(interp): /bin/sh /bin/sh [ 86s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 86s] Requires(post): /bin/sh [ 86s] Requires(postun): /bin/sh [ 86s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libcups.so.2 libcupsimage.so.2 libescpr.so.1 [ 86s] Processing files: epson-inkjet-printer-escpr-debugsource-1.2.2-4.6.i686 [ 86s] Provides: epson-inkjet-printer-escpr-debugsource = 1.2.2-4.6 epson-inkjet-printer-escpr-debugsource(x86-32) = 1.2.2-4.6 [ 86s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 86s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-4.6.i386 [ 86s] Wrote: /home/abuild/rpmbuild/SRPMS/epson-inkjet-printer-escpr-1.2.2-4.6.src.rpm [ 86s] Wrote: /home/abuild/rpmbuild/RPMS/i686/epson-inkjet-printer-escpr-1.2.2-4.6.i686.rpm [ 86s] Wrote: /home/abuild/rpmbuild/RPMS/i686/epson-inkjet-printer-escpr-debugsource-1.2.2-4.6.i686.rpm [ 86s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.2UsbBU [ 86s] + umask 022 [ 86s] + cd /home/abuild/rpmbuild/BUILD [ 86s] + cd epson-inkjet-printer-escpr-1.2.2 [ 86s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-4.6.i386 [ 86s] + make clean [ 86s] Making clean in src [ 86s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/src' [ 86s] rm -f epson-escpr epson-escpr-wrapper [ 86s] rm -rf .libs _libs [ 86s] rm -f *.o [ 86s] rm -f *.lo [ 86s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/src' [ 86s] Making clean in ppd [ 86s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/ppd' [ 86s] rm -rf .libs _libs [ 86s] rm -f *.lo [ 86s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/ppd' [ 86s] Making clean in lib [ 86s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/lib' [ 86s] test -z "libescpr.la" || rm -f libescpr.la [ 86s] test -z "libescpr.la" || rm -f libescpr.la [ 86s] rm -f "./so_locations" [ 86s] rm -rf .libs _libs [ 86s] rm -f *.o [ 86s] rm -f *.lo [ 86s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/lib' [ 86s] Making clean in . [ 86s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2' [ 86s] rm -rf .libs _libs [ 86s] rm -f *.lo [ 86s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2' [ 86s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-4.6.i386 [ 86s] + exit 0 [ 86s] ... checking for files with abuild user/group [ 86s] [ 86s] RPMLINT report: [ 86s] =============== [ 87s] epson-inkjet-printer-escpr.i686: E: non-standard-group (Badness: 200) Applications/System [ 87s] epson-inkjet-printer-escpr.src: E: non-standard-group (Badness: 200) Applications/System [ 87s] The value of the Group tag in the package is not valid. Valid groups are [ 87s] listed here: https://wiki.tizen.org/wiki/Packaging/Guidelines#Group_Tag [ 87s] [ 87s] epson-inkjet-printer-escpr.src:19: W: macro-in-comment %define [ 87s] epson-inkjet-printer-escpr.src:86: W: macro-in-comment %doc [ 87s] There is a unescaped macro after a shell style comment in the specfile. Macros [ 87s] are expanded everywhere, so check if it can cause a problem in this case and [ 87s] escape the macro with another leading % if appropriate. [ 87s] [ 87s] epson-inkjet-printer-escpr.i686: E: invalid-license (Badness: 200) GPL [ 87s] epson-inkjet-printer-escpr.src: E: invalid-license (Badness: 200) GPL [ 87s] The specified license string is not recognized. Please refer to [ 87s] http://spdx.org/licenses/ for the list of known licences and their exact [ 87s] spelling. [ 87s] [ 87s] epson-inkjet-printer-escpr.src:31: W: hardcoded-packager-tag Seiko [ 87s] The Packager tag is hardcoded in your spec file. It should be removed, so as [ 87s] to use rebuilder's own defaults. [ 87s] [ 87s] 2 packages and 0 specfiles checked; 4 errors, 3 warnings. [ 87s] [ 87s] ... creating baselibs [ 87s] ... comparing built packages with the former built [ 87s] /usr/lib/build/rpm-check.sh [ 87s] compare /.build.oldpackages/epson-inkjet-printer-escpr-1.2.2-4.2.src.rpm /home/abuild/rpmbuild/SRPMS/epson-inkjet-printer-escpr-1.2.2-4.6.src.rpm [ 88s] compare /.build.oldpackages/epson-inkjet-printer-escpr-1.2.2-4.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/epson-inkjet-printer-escpr-1.2.2-4.6.i686.rpm [ 88s] compare /.build.oldpackages/epson-inkjet-printer-escpr-debugsource-1.2.2-4.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/epson-inkjet-printer-escpr-debugsource-1.2.2-4.6.i686.rpm [ 88s] comparing /.build.oldpackages/rpmlint.log and /home/abuild/rpmbuild/OTHER/rpmlint.log [ 88s] rpmlint.log files differ: [ 88s] --- /.build.oldpackages/rpmlint.log 2013-08-02 21:36:33.926809878 +0000 [ 88s] +++ /home/abuild/rpmbuild/OTHER/rpmlint.log 2013-08-02 21:37:56.057451869 +0000 [ 88s] @@ -1,5 +1,5 @@ [ 88s] -epson-inkjet-printer-escpr.i686: W: non-standard-group Applications/System [ 88s] -epson-inkjet-printer-escpr.src: W: non-standard-group Applications/System [ 88s] +epson-inkjet-printer-escpr.i686: E: non-standard-group (Badness: 200) Applications/System [ 88s] +epson-inkjet-printer-escpr.src: E: non-standard-group (Badness: 200) Applications/System [ 88s] The value of the Group tag in the package is not valid. Valid groups are [ 88s] listed here: https://wiki.tizen.org/wiki/Packaging/Guidelines#Group_Tag [ 88s] [ 88s] @@ -9,8 +9,8 @@ [ 88s] are expanded everywhere, so check if it can cause a problem in this case and [ 88s] escape the macro with another leading % if appropriate. [ 88s] [ 88s] -epson-inkjet-printer-escpr.i686: W: invalid-license GPL [ 88s] -epson-inkjet-printer-escpr.src: W: invalid-license GPL [ 88s] +epson-inkjet-printer-escpr.i686: E: invalid-license (Badness: 200) GPL [ 88s] +epson-inkjet-printer-escpr.src: E: invalid-license (Badness: 200) GPL [ 88s] The specified license string is not recognized. Please refer to [ 88s] http://spdx.org/licenses/ for the list of known licences and their exact [ 88s] ... saving built packages [ 88s] /home/abuild/rpmbuild/RPMS/i686/epson-inkjet-printer-escpr-1.2.2-4.6.i686.rpm [ 88s] /home/abuild/rpmbuild/RPMS/i686/epson-inkjet-printer-escpr-debugsource-1.2.2-4.6.i686.rpm [ 88s] /home/abuild/rpmbuild/SRPMS/epson-inkjet-printer-escpr-1.2.2-4.6.src.rpm [ 88s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 88s] [ 88s] w07 finished "build epson-inkjet-printer-escpr.spec" at Fri Aug 2 21:37:57 UTC 2013. [ 88s] [ 89s] Powering off. [ 91s] [ 84.047888] Power down. [ 91s] build: extracting built packages... [ 91s] epson-inkjet-printer-escpr-1.2.2-4.6.i686.rpm [ 91s] epson-inkjet-printer-escpr-debugsource-1.2.2-4.6.i686.rpm [ 91s] epson-inkjet-printer-escpr-1.2.2-4.6.src.rpm [ 91s] rpmlint.log Retried build at Mon Aug 5 14:48:10 2013 returned same result, skipped Retried build at Tue Aug 13 19:43:44 2013 returned same result, skipped Retried build at Wed Aug 14 21:40:17 2013 returned same result, skipped Retried build at Fri Aug 16 13:34:50 2013 returned same result, skipped Retried build at Tue Aug 20 17:49:09 2013 returned same result, skipped Retried build at Thu Aug 22 12:13:14 2013 returned same result, skipped Retried build at Mon Aug 26 06:04:47 2013 returned same result, skipped