[ 0s] Using BUILD_ROOT=/srv/build/root_1/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_1/root [ 0s] [ 0s] [ 0s] w03 started "build _service:gbs:e-mod-tizen-wm-policy.spec" at Wed Nov 23 00:37:07 UTC 2016. [ 0s] [ 0s] Building e-mod-tizen-wm-policy for project 'Tizen:3.0:Wearable' repository 'emulator-circle' arch 'i586' srcmd5 '9692b57a21c31c43660951cdb6b28708' [ 0s] [ 0s] processing specfile /srv/build/root_1/.build-srcdir/_service:gbs:e-mod-tizen-wm-policy.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_1/.build-srcdir/_service:gbs:e-mod-tizen-wm-policy.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_1/.build.rpmlist /srv/build/root_1/.build-srcdir/_service:gbs:e-mod-tizen-wm-policy.spec build rpmlint-Factory ... [ 1s] Copying qemu-fix-build-hang.sh [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/35] preinstalling libmagic-data... [ 1s] [2/35] preinstalling setup... [ 1s] [3/35] preinstalling filesystem... [ 1s] [4/35] preinstalling glibc... [ 1s] [5/35] preinstalling bash... [ 1s] [6/35] preinstalling diffutils... [ 1s] [7/35] preinstalling grep... [ 1s] [8/35] preinstalling libattr... [ 1s] [9/35] preinstalling libbz2... [ 1s] [10/35] preinstalling libcap... [ 1s] [11/35] preinstalling libelf... [ 2s] [12/35] preinstalling libfreebl3... [ 2s] [13/35] preinstalling libgcc... [ 2s] [14/35] preinstalling liblua... [ 2s] [15/35] preinstalling liblzma... [ 2s] [16/35] preinstalling libncurses... [ 2s] [17/35] preinstalling libpopt... [ 2s] [18/35] preinstalling libsmack... [ 2s] [19/35] preinstalling libsqlite... [ 2s] [20/35] preinstalling nspr... [ 2s] [21/35] preinstalling sed... [ 2s] [22/35] preinstalling zlib... [ 2s] [23/35] preinstalling coreutils... [ 2s] [24/35] preinstalling libacl... [ 2s] [25/35] preinstalling libreadline... [ 2s] [26/35] preinstalling smack... [ 2s] [27/35] preinstalling bzip2... [ 2s] [28/35] preinstalling libmagic... [ 2s] [29/35] preinstalling libxml2... [ 2s] [30/35] preinstalling tar... [ 2s] [31/35] preinstalling util-linux... [ 2s] [32/35] preinstalling util-linux-su... [ 2s] [33/35] preinstalling nss... [ 2s] [34/35] preinstalling libsoftokn3... [ 2s] [35/35] preinstalling rpm... [ 2s] [ 2s] [1/9] preinstalling libext2fs... [ 2s] [2/9] preinstalling libpcre... [ 3s] [3/9] preinstalling libsmartcols... [ 3s] [4/9] preinstalling libuuid... [ 3s] [5/9] preinstalling perl... [ 3s] [6/9] preinstalling grep... [ 3s] [7/9] preinstalling libblkid... [ 3s] [8/9] preinstalling libmount... [ 3s] [9/9] preinstalling util-linux... [ 3s] copying packages... [ 4s] reordering...cycle: gio-branding-upstream -> libgio [ 4s] breaking dependency libgio -> gio-branding-upstream [ 4s] cycle: nss -> libsoftokn3 [ 4s] breaking dependency nss -> libsoftokn3 [ 4s] cycle: efl -> ecore [ 4s] breaking dependency ecore -> efl [ 4s] cycle: efl -> ecore -> ector [ 4s] breaking dependency ecore -> ector [ 4s] cycle: efl -> ecore -> eet [ 4s] breaking dependency ecore -> eet [ 4s] cycle: efl -> ecore -> eeze [ 4s] breaking dependency ecore -> eeze [ 4s] cycle: efl -> ecore -> eina [ 4s] breaking dependency ecore -> eina [ 4s] cycle: efl -> ecore -> eldbus [ 4s] breaking dependency ecore -> eldbus [ 4s] cycle: efl -> ecore -> emile [ 4s] breaking dependency efl -> ecore [ 4s] cycle: efl -> eina [ 4s] breaking dependency efl -> eina [ 4s] cycle: efl -> eo [ 4s] breaking dependency eo -> efl [ 4s] cycle: efl -> eo -> eina [ 4s] breaking dependency eo -> eina [ 4s] cycle: vconf-compat -> buxton2 [ 4s] breaking dependency buxton2 -> vconf-compat [ 4s] cycle: ecore -> evas [ 4s] breaking dependency evas -> ecore [ 4s] cycle: libsensord -> sensord [ 4s] breaking dependency libsensord -> sensord [ 4s] cycle: ecore-devel -> eeze-devel [ 4s] breaking dependency ecore-devel -> eeze-devel [ 4s] cycle: eldbus-devel -> ecore-devel [ 4s] breaking dependency ecore-devel -> eldbus-devel [ 4s] done [ 4s] booting kvm ... [ 4s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 16000 -drive file=/srv/build/root_1/root,if=virtio,cache=none -drive file=/srv/build/root_1/root,if=ide,index=0,cache=none -drive file=/srv/build/root_1/swap,if=virtio,cache=none -smp 8 [ 8s] doing fast boot [ 8s] Creating device nodes with udev [ 9s] Waiting for device /dev/vda to appear: ok [ 9s] fsck from util-linux 2.21.2 [ 9s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 9s] /dev/vda: clean, 4630/4194304 files, 303675/16777216 blocks [ 9s] fsck succeeded. Mounting root device read-write. [ 9s] Mounting root /dev/vda [ 9s] mount -o rw -t ext4 /dev/vda /root [ 9s] replacing /etc/mtab with symlink to /proc/self/mounts [ 9s] 2nd stage started in virtual machine [ 9s] machine type: x86_64 [ 9s] switching personality to 8... [ 9s] 2nd stage started in virtual machine [ 9s] machine type: i686 [ 9s] swapon: /dev/vdb: found signature [pagesize=4096, signature=swap] [ 9s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 9s] swapon /dev/vdb [ 9s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 9s] mount: none is already mounted or /proc busy [ 9s] mount: none is already mounted or /dev/pts busy [ 9s] logging output to //.build.log... [ 9s] processing specfile /.build-srcdir/_service:gbs:e-mod-tizen-wm-policy.spec ... [ 9s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:e-mod-tizen-wm-policy.spec build rpmlint-Factory ... [ 9s] running setup postinstall script [ 9s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 9s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 9s] initializing rpm db... [ 9s] [1/237] installing default-ac-domains-0.1-1.1 [ 9s] [2/237] installing libmagic-data-5.28-1.1 [ 9s] [3/237] installing setup-0.9-1.1 [ 9s] [4/237] installing terminfo-base-5.9-1.1 [ 9s] [5/237] installing filesystem-3.1-1.1 [ 9s] [6/237] installing glibc-2.20-1.1 [ 10s] [7/237] installing bash-3.2.57-1.1 [ 10s] [8/237] installing capi-base-common-0.4.12-2.1 [ 10s] [9/237] installing cpio-2.11-1.1 [ 10s] [10/237] installing diffutils-3.3-1.1 [ 10s] [11/237] installing findutils-4.3.8-1.1 [ 10s] [12/237] installing fribidi-0.19.7-1.1 [ 10s] [13/237] installing gdbm-1.8.3-1.1 [ 10s] [14/237] installing giflib-5.1.2-1.1 [ 10s] [15/237] installing hostname-3.12-1.1 [ 10s] [16/237] installing iniparser-3.1-1.1 [ 10s] [17/237] installing libatomic-4.9.2-1.2 [ 10s] [18/237] installing libattr-2.4.47-1.1 [ 10s] [19/237] installing libbz2-1.0.6-1.5 [ 10s] [20/237] installing libcap-2.24-1.1 [ 10s] [21/237] installing libdrm-2.4.58-1.1 [ 10s] [22/237] installing libelf-0.153-1.5 [ 10s] [23/237] installing libelf0-0.8.13-1.1 [ 10s] [24/237] installing libevdev-1.2.2-1.1 [ 10s] [25/237] installing libexpat-2.1.1-1.1 [ 10s] [26/237] installing libext2fs-1.42.13-1.1 [ 10s] [27/237] installing libffi-3.1-1.1 [ 10s] [28/237] installing libfreebl3-3.23-1.5 [ 10s] [29/237] installing libgcc-4.9.2-1.2 [ 10s] [30/237] installing libgomp-4.9.2-1.2 [ 10s] [31/237] installing libhyphen-2.8.8-1.1 [ 10s] [32/237] installing libitm-4.9.2-1.2 [ 10s] [33/237] installing libjpeg-8.0.2-1.3 [ 10s] [34/237] installing libjson-0.12-1.1 [ 10s] [35/237] installing libltdl-2.4.2-1.1 [ 10s] [36/237] installing liblua-5.1.4-1.1 [ 11s] [37/237] installing liblzma-5.1.3-1.1 [ 11s] [38/237] installing libmtdev-1.1.5-1.1 [ 11s] [39/237] installing libogg-1.3.2-1.1 [ 11s] [40/237] installing libpcre-8.39-1.1 [ 11s] [41/237] installing libpopt-1.16-1.1 [ 11s] [42/237] installing libpython-2.7.8-1.2 [ 11s] [43/237] installing libsmack-1.3.0-2.1 [ 11s] [44/237] installing libsmartcols-2.28-1.1 [ 11s] [45/237] installing libsqlite-3.8.10.2-1.1 [ 11s] [46/237] installing libuuid-2.28-1.1 [ 11s] [47/237] installing libwayland-egl-1.0-5.1 [ 11s] [48/237] installing libxkbcommon-0.4.3-1.1 [ 11s] [49/237] installing m4-1.4.17-1.1 [ 11s] [50/237] installing net-tools-2.0_20121208git-1.1 [ 11s] [51/237] installing nspr-4.12-1.1 [ 11s] [52/237] installing patch-2.7-1.1 [ 11s] [53/237] installing pixman-0.32.6-1.1 [ 11s] [54/237] installing pkg-config-0.28-1.1 [ 11s] [55/237] installing sed-4.1c-1.1 [ 11s] [56/237] installing update-alternatives-1.16.3-1.1 [ 11s] [57/237] installing which-2.20-1.1 [ 11s] [58/237] installing zlib-1.2.8-1.1 [ 11s] [59/237] installing libncurses-5.9-1.1 [ 11s] [60/237] installing shadow-utils-4.1.4.2-1.1 [ 11s] [61/237] installing build-compare-2015.04.28-1.4 [ 11s] [62/237] installing capi-base-common-devel-0.4.12-2.1 [ 11s] [63/237] installing coreutils-6.9-1.1 [ 12s] [64/237] installing cpp-4.9.2-1.2 [ 12s] [65/237] installing fribidi-devel-0.19.7-1.1 [ 12s] [66/237] installing gawk-3.1.5-1.1 [ 12s] [67/237] installing gcc-c++-4.9.2-1.2 [ 13s] [68/237] installing grep-2.5.2-1.1 [ 13s] [69/237] installing less-466-1.1 [ 13s] [70/237] installing libacl-2.2.52-1.1 [ 13s] [71/237] installing libasm-0.153-1.5 [ 13s] [72/237] installing libblkid-2.28-1.1 [ 13s] [73/237] installing libcap-tools-2.24-1.1 [ 13s] [74/237] installing libglib-2.44.1-4.1 [ 14s] [75/237] installing libkms-2.4.58-1.1 [ 14s] [76/237] installing libopenssl-1.0.2j-1.1 [ 15s] [77/237] installing libpciaccess-0.13.2-1.1 [ 15s] [78/237] installing libpcreposix-8.39-1.1 [ 15s] [79/237] installing libpng-1.6.21-1.1 [ 15s] [80/237] installing libreadline-5.2-1.1 [ 15s] [81/237] installing libstdc++-4.9.2-1.2 [ 15s] [82/237] installing libuuid-devel-2.28-1.1 [ 15s] [83/237] installing libvorbis-1.3.4-1.1 [ 15s] [84/237] installing libwayland-client-1.10.0-1.1 [ 15s] [85/237] installing libwayland-server-1.10.0-1.1 [ 15s] [86/237] installing libxkbcommon-devel-0.4.3-1.1 [ 15s] [87/237] installing make-4.0-1.1 [ 15s] [88/237] installing nss-certs-3.23-1.5 [ 15s] [89/237] installing smack-1.3.0-2.1 [ 16s] [90/237] installing binutils-2.25-1.2 [ 16s] [91/237] installing bzip2-1.0.6-1.5 [ 16s] [92/237] installing libmagic-5.28-1.1 [ 16s] [93/237] installing libxml2-2.9.4-1.1 [ 16s] [94/237] installing xz-5.1.3-1.1 [ 16s] [95/237] installing libkmod-18-1.1 [ 16s] [96/237] installing libdw-0.153-1.5 [ 16s] [97/237] installing libstdc++-devel-4.9.2-1.2 [ 16s] [98/237] installing file-5.28-1.1 [ 17s] [99/237] installing libgmodule-2.44.1-4.1 [ 17s] [100/237] installing libgthread-2.44.1-4.1 [ 17s] [101/237] installing libmount-2.28-1.1 [ 17s] [102/237] installing libwayland-cursor-1.10.0-1.1 [ 17s] [103/237] installing libwayland-extension-client-1.0.57-7.1 [ 17s] [104/237] installing libwayland-extension-server-1.0.57-7.1 [ 17s] [105/237] installing linux-glibc-devel-3.10-1.1 [ 17s] [106/237] installing openssl-1.0.2j-1.1 [ 17s] [107/237] installing tar-1.17-1.1 [ 18s] [108/237] installing vconf-internal-keys-devel-0.0.159-7.1 [ 18s] [109/237] installing db4-4.8.30.NC-1.1 [ 18s] [110/237] installing glibc-locale-2.20-1.1 [ 19s] [111/237] installing gzip-1.3.12-1.1 [ 19s] [112/237] installing libblkid-devel-2.28-1.1 [ 19s] [113/237] installing libcilkrts-4.9.2-1.2 [ 19s] [114/237] installing libdrm-intel-2.4.58-1.1 [ 19s] [115/237] installing libfdisk1-2.28-1.1 [ 19s] [116/237] installing libfreetype-2.6.5-1.1 [ 19s] [117/237] installing libgobject-2.44.1-4.1 [ 19s] [118/237] installing libubsan-4.9.2-1.2 [ 19s] [119/237] installing lua-5.1.4-1.1 [ 19s] [120/237] installing pam-1.1.6-1.1 [ 20s] [121/237] installing security-config-1.0-5.1 [ 20s] usermod: user 'buxton' does not exist [ 20s] usermod: user 'dbus' does not exist [ 20s] [122/237] installing libicu-57.1-1.1 [ 21s] [123/237] installing libpcrecpp-8.39-1.1 [ 21s] [124/237] installing libsndfile-1.0.26-1.1 [ 22s] [125/237] installing tzdata-2016i-2.1 [ 22s] [126/237] installing cynara-db-migration-0.14.5-2.1 [ 22s] [127/237] installing ttrace-1.0.0-4.1 [ 22s] [128/237] installing libtiff-4.0.6-1.1 [ 22s] [129/237] installing elfutils-0.153-1.5 [ 22s] [130/237] installing shared-mime-info-1.3-2.1 [ 27s] [131/237] installing glibc-devel-2.20-1.1 [ 27s] [132/237] installing libicu-devel-57.1-1.1 [ 28s] [133/237] installing libmount-devel-2.28-1.1 [ 28s] [134/237] installing lua-devel-5.1.4-1.1 [ 29s] [135/237] installing perl-5.20.0-1.5 [ 41s] [136/237] installing libdrm-devel-2.4.58-1.1 [ 41s] [137/237] installing libsystemd-219-6.1 [ 41s] [138/237] installing libharfbuzz-1.3.0-1.1 [ 41s] [139/237] installing pcre-devel-8.39-1.1 [ 41s] [140/237] installing fontconfig-2.12.1-5.1 [ 43s] [141/237] installing libcynara-commons-0.14.5-2.1 [ 43s] [142/237] installing wayland-devel-1.10.0-1.1 [ 44s] [143/237] installing gcc-4.9.2-1.2 [ 45s] [144/237] installing python-2.7.8-1.2 [ 45s] [145/237] installing util-linux-2.28-1.1 [ 45s] [146/237] installing systemd-219-6.1 [ 46s] [147/237] installing build-mkbaselibs-20120927-1.1 [ 46s] [148/237] installing autoconf-2.69-1.1 [ 46s] [149/237] installing dbus-libs-1.10.6-3.1 [ 46s] [150/237] installing python-xml-2.7.8-1.2 [ 46s] [151/237] installing systemd-devel-219-6.1 [ 46s] [152/237] installing util-linux-su-2.28-1.1 [ 46s] [153/237] installing wayland-extension-client-devel-1.0.57-7.1 [ 46s] [154/237] installing wayland-extension-server-devel-1.0.57-7.1 [ 46s] [155/237] installing zlib-devel-1.2.8-1.1 [ 46s] [156/237] installing libcynara-client-0.14.5-2.1 [ 46s] [157/237] installing libcynara-creds-commons-0.14.5-2.1 [ 46s] [158/237] installing libcynara-session-0.14.5-2.1 [ 46s] [159/237] installing libsndfile-devel-1.0.26-1.1 [ 46s] [160/237] installing libinput-0.11.0-1.1 [ 46s] [161/237] installing libdlog-0.5.1-7.1 [ 46s] [162/237] installing dbus-devel-1.10.6-3.1 [ 46s] [163/237] installing libtracker-1.0.1-1.1 [ 46s] [164/237] installing coregl-0.1.10-5.6 [ 46s] [165/237] installing libdlog-devel-0.5.1-7.1 [ 47s] [166/237] installing libinput-devel-0.11.0-1.1 [ 47s] [167/237] installing automake-1.14.1-1.1 [ 47s] [168/237] installing libopenssl-devel-1.0.2j-1.1 [ 47s] [169/237] installing build-20120927-1.1 [ 47s] [170/237] installing libcynara-creds-socket-0.14.5-2.1 [ 47s] [171/237] installing libpng-devel-1.6.21-1.1 [ 47s] [172/237] installing libpulse-5.0-5.1 [ 47s] [173/237] installing libtbm-2.0.8-6.1 [ 47s] [174/237] installing capi-system-info-0.2.0-1.1 [ 48s] [175/237] installing libpulse-mainloop-glib-5.0-5.1 [ 48s] [176/237] installing libtbm-devel-2.0.8-6.1 [ 48s] [177/237] installing libtool-2.4.2-1.1 [ 48s] [178/237] installing libwayland-tbm-client-0.1.11-5.1 [ 48s] [179/237] installing ttrace-devel-1.0.0-4.1 [ 48s] [180/237] installing freetype2-devel-2.6.5-1.1 [ 48s] [181/237] installing libwayland-tbm-server-0.1.11-5.1 [ 48s] [182/237] installing libtdm-1.4.6-6.1 [ 48s] [183/237] installing fontconfig-devel-2.12.1-5.1 [ 49s] [184/237] installing libgbm-1.0-1.1 [ 49s] [185/237] installing libtdm-devel-1.4.6-6.1 [ 49s] [186/237] installing libgbm-devel-1.0-1.1 [ 49s] [187/237] installing eo-1.16.0-6.2 [ 49s] [188/237] installing nss-3.23-1.5 [ 49s] [189/237] installing libgio-2.44.1-4.1 [ 49s] [190/237] installing gio-branding-upstream-2.44.1-4.1 [ 49s] [191/237] installing efl-1.16.0-6.2 [ 49s] [192/237] installing libsoftokn3-3.23-1.5 [ 50s] [193/237] installing glib2-tools-2.44.1-4.1 [ 50s] [194/237] installing rpm-4.11.0.1-1.1 [ 50s] [195/237] installing buxton2-1.1-6.1 [ 51s] warning: user buxton does not exist - using root [ 51s] warning: group buxton does not exist - using root [ 51s] warning: user buxton does not exist - using root [ 51s] warning: group buxton does not exist - using root [ 51s] chmod: cannot access `/etc/buxton2/*': No such file or directory [ 51s] /etc/buxton2/*: No such file or directory [ 51s] [196/237] installing rpmlint-mini-1.5-1.1 [ 51s] [197/237] installing eina-1.16.0-6.2 [ 51s] [198/237] installing vconf-compat-1.1-6.1 [ 51s] [199/237] installing glib2-devel-2.44.1-4.1 [ 51s] [200/237] installing rpm-build-4.11.0.1-1.1 [ 51s] [201/237] installing rpmlint-tizen-1.0-1.1 [ 51s] [202/237] installing embryo-1.16.0-6.2 [ 51s] [203/237] installing ector-1.16.0-6.2 [ 51s] [204/237] installing eina-devel-1.16.0-6.2 [ 52s] [205/237] installing harfbuzz-devel-1.3.0-1.1 [ 52s] [206/237] installing libpulse-devel-5.0-5.1 [ 52s] [207/237] installing vconf-compat-devel-1.1-6.1 [ 52s] [208/237] installing emile-1.16.0-6.2 [ 52s] [209/237] installing capi-system-device-0.1.0-1.1 [ 53s] [210/237] installing libsensord-2.0.8-4.1 [ 53s] [211/237] installing embryo-devel-1.16.0-6.2 [ 53s] [212/237] installing eo-devel-1.16.0-6.2 [ 53s] [213/237] installing emile-devel-1.16.0-6.2 [ 53s] [214/237] installing libsensord-devel-2.0.8-4.1 [ 53s] [215/237] installing eet-1.16.0-6.2 [ 53s] [216/237] installing sensord-2.0.8-4.1 [ 53s] Failed to get D-Bus connection: Operation not permitted [ 53s] warning: %post(sensord-2.0.8-4.1.i686) scriptlet failed, exit status 1 [ 53s] [217/237] installing efl-devel-1.16.0-6.2 [ 53s] [218/237] installing eet-devel-1.16.0-6.2 [ 53s] [219/237] installing evas-1.16.0-6.2 [ 53s] [220/237] installing ector-devel-1.16.0-6.2 [ 53s] [221/237] installing ecore-1.16.0-6.2 [ 53s] [222/237] installing efreet-1.16.0-6.2 [ 53s] [223/237] installing eldbus-1.16.0-6.2 [ 54s] [224/237] installing tzsh-0.2.7-4.1 [ 54s] [225/237] installing eeze-1.16.0-6.2 [ 54s] [226/237] installing eio-1.16.0-6.2 [ 54s] [227/237] installing evas-devel-1.16.0-6.2 [ 54s] [228/237] installing edje-1.16.0-6.2 [ 54s] [229/237] installing ecore-devel-1.16.0-6.2 [ 55s] [230/237] installing eldbus-devel-1.16.0-6.2 [ 55s] [231/237] installing efreet-devel-1.16.0-6.2 [ 55s] [232/237] installing eio-devel-1.16.0-6.2 [ 55s] [233/237] installing edje-tools-1.16.0-6.2 [ 55s] [234/237] installing eeze-devel-1.16.0-6.2 [ 55s] [235/237] installing enlightenment-0.20.0-10.1 [ 56s] [236/237] installing edje-devel-1.16.0-6.2 [ 56s] [237/237] installing enlightenment-devel-0.20.0-10.1 [ 56s] removing nis flags from //etc/nsswitch.conf... [ 56s] now finalizing build dir... [ 61s] Warning: spec file parser line 49: macro too deeply nested [ 61s] Warning: spec file parser line 50: macro too deeply nested [ 62s] Warning: spec file parser line 51: macro too deeply nested [ 62s] Warning: spec file parser line 59: macro too deeply nested [ 62s] Warning: spec file parser line 60: macro too deeply nested [ 64s] build target is i686-tizen-linux [ 64s] ----------------------------------------------------------------- [ 64s] I have the following modifications for e-mod-tizen-wm-policy.spec: [ 64s] 8c8 [ 64s] < Release: 1 [ 64s] --- [ 64s] > Release: 5.1 [ 64s] ----------------------------------------------------------------- [ 64s] ----- building e-mod-tizen-wm-policy.spec (user abuild) [ 64s] ----------------------------------------------------------------- [ 64s] ----------------------------------------------------------------- [ 64s] Running qemu build hang workaround... [ 64s] /bin/ps command not found [ 64s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0:Wearable/emulator-circle/9692b57a21c31c43660951cdb6b28708-e-mod-tizen-wm-policy' /home/abuild/rpmbuild/SOURCES/e-mod-tizen-wm-policy.spec [ 65s] Building target platforms: i686-tizen-linux [ 65s] Building for target i686-tizen-linux [ 65s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.UMQXOQ [ 65s] + umask 022 [ 65s] + cd /home/abuild/rpmbuild/BUILD [ 65s] + cd /home/abuild/rpmbuild/BUILD [ 65s] + rm -rf e-mod-tizen-wm-policy-0.3.0 [ 65s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/e-mod-tizen-wm-policy-0.3.0.tar.bz2 [ 65s] + /bin/tar -xf - [ 65s] + STATUS=0 [ 65s] + '[' 0 -ne 0 ']' [ 65s] + cd e-mod-tizen-wm-policy-0.3.0 [ 65s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 65s] + exit 0 [ 65s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.w4YBsH [ 65s] + umask 022 [ 65s] + cd /home/abuild/rpmbuild/BUILD [ 65s] + cd e-mod-tizen-wm-policy-0.3.0 [ 65s] ++ uname -m [ 65s] + [[ i686 == \a\a\r\c\h\6\4 ]] [ 65s] + LANG=C [ 65s] + export LANG [ 65s] + unset DISPLAY [ 65s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 65s] + export CFLAGS [ 65s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 65s] + export CXXFLAGS [ 65s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 65s] + export FFLAGS [ 65s] + LDFLAGS= [ 65s] + export LDFLAGS [ 65s] + LD_AS_NEEDED=1 [ 65s] + export LD_AS_NEEDED [ 65s] + export 'CFLAGS+= -DE_LOGGING=1 -Werror-implicit-function-declaration' [ 65s] + CFLAGS+=' -DE_LOGGING=1 -Werror-implicit-function-declaration' [ 65s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -DE_LOGGING=1 -Werror-implicit-function-declaration' [ 65s] + export CFLAGS [ 65s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 65s] + export CXXFLAGS [ 65s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 65s] + export FFLAGS [ 65s] + autoreconf -v --install --force [ 66s] autoreconf: Entering directory `.' [ 66s] autoreconf: configure.ac: not using Gettext [ 67s] autoreconf: running: aclocal --force -I m4 [ 68s] configure.ac:26: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body [ 68s] ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... [ 68s] ../../lib/autoconf/general.m4:2661: _AC_LINK_IFELSE is expanded from... [ 68s] ../../lib/autoconf/general.m4:2678: AC_LINK_IFELSE is expanded from... [ 68s] m4/libtool.m4:1018: _LT_SYS_MODULE_PATH_AIX is expanded from... [ 68s] m4/libtool.m4:4127: _LT_LINKER_SHLIBS is expanded from... [ 68s] m4/libtool.m4:5198: _LT_LANG_C_CONFIG is expanded from... [ 68s] m4/libtool.m4:138: _LT_SETUP is expanded from... [ 68s] m4/libtool.m4:67: LT_INIT is expanded from... [ 68s] m4/libtool.m4:102: AC_PROG_LIBTOOL is expanded from... [ 68s] configure.ac:26: the top level [ 68s] configure.ac:26: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body [ 68s] ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... [ 68s] ../../lib/autoconf/general.m4:2661: _AC_LINK_IFELSE is expanded from... [ 68s] ../../lib/autoconf/general.m4:2678: AC_LINK_IFELSE is expanded from... [ 68s] m4/libtool.m4:4127: _LT_LINKER_SHLIBS is expanded from... [ 68s] m4/libtool.m4:5198: _LT_LANG_C_CONFIG is expanded from... [ 68s] m4/libtool.m4:138: _LT_SETUP is expanded from... [ 68s] m4/libtool.m4:67: LT_INIT is expanded from... [ 68s] m4/libtool.m4:102: AC_PROG_LIBTOOL is expanded from... [ 68s] configure.ac:26: the top level [ 68s] autoreconf: configure.ac: tracing [ 69s] configure.ac:26: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body [ 69s] ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... [ 69s] ../../lib/autoconf/general.m4:2661: _AC_LINK_IFELSE is expanded from... [ 69s] ../../lib/autoconf/general.m4:2678: AC_LINK_IFELSE is expanded from... [ 69s] m4/libtool.m4:1018: _LT_SYS_MODULE_PATH_AIX is expanded from... [ 69s] m4/libtool.m4:4127: _LT_LINKER_SHLIBS is expanded from... [ 69s] m4/libtool.m4:5198: _LT_LANG_C_CONFIG is expanded from... [ 69s] m4/libtool.m4:138: _LT_SETUP is expanded from... [ 69s] m4/libtool.m4:67: LT_INIT is expanded from... [ 69s] m4/libtool.m4:102: AC_PROG_LIBTOOL is expanded from... [ 69s] configure.ac:26: the top level [ 69s] configure.ac:26: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body [ 69s] ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... [ 69s] ../../lib/autoconf/general.m4:2661: _AC_LINK_IFELSE is expanded from... [ 69s] ../../lib/autoconf/general.m4:2678: AC_LINK_IFELSE is expanded from... [ 69s] m4/libtool.m4:4127: _LT_LINKER_SHLIBS is expanded from... [ 69s] m4/libtool.m4:5198: _LT_LANG_C_CONFIG is expanded from... [ 69s] m4/libtool.m4:138: _LT_SETUP is expanded from... [ 69s] m4/libtool.m4:67: LT_INIT is expanded from... [ 69s] m4/libtool.m4:102: AC_PROG_LIBTOOL is expanded from... [ 69s] configure.ac:26: the top level [ 70s] autoreconf: running: libtoolize --copy --force [ 70s] libtoolize: putting auxiliary files in `.'. [ 70s] libtoolize: copying file `./ltmain.sh' [ 70s] libtoolize: putting macros in `m4'. [ 70s] libtoolize: copying file `m4/libtool.m4' [ 70s] libtoolize: copying file `m4/ltoptions.m4' [ 70s] libtoolize: copying file `m4/ltsugar.m4' [ 70s] libtoolize: copying file `m4/ltversion.m4' [ 70s] libtoolize: copying file `m4/lt~obsolete.m4' [ 70s] libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and [ 70s] libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. [ 72s] autoreconf: running: /usr/bin/autoconf --force [ 73s] autoreconf: running: /usr/bin/autoheader --force [ 74s] autoreconf: running: automake --add-missing --copy --force-missing [ 76s] configure.ac:11: installing './compile' [ 76s] configure.ac:9: installing './config.guess' [ 76s] configure.ac:9: installing './config.sub' [ 76s] configure.ac:13: installing './install-sh' [ 76s] configure.ac:13: installing './missing' [ 76s] Makefile.am: installing './INSTALL' [ 76s] src/Makefile.am: installing './depcomp' [ 76s] autoreconf: Leaving directory `.' [ 76s] + ./configure --build=i686-tizen-linux-gnu --host=i686-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --enable-wayland-only --enable-auto-rotation [ 76s] checking build system type... i686-tizen-linux-gnu [ 76s] checking host system type... i686-tizen-linux-gnu [ 77s] checking for i686-tizen-linux-gnu-gcc... no [ 77s] checking for gcc... gcc [ 77s] checking whether the C compiler works... yes [ 77s] checking for C compiler default output file name... a.out [ 77s] checking for suffix of executables... [ 77s] checking whether we are cross compiling... no [ 77s] checking for suffix of object files... o [ 77s] checking whether we are using the GNU C compiler... yes [ 78s] checking whether gcc accepts -g... yes [ 78s] checking for gcc option to accept ISO C89... none needed [ 80s] checking whether gcc understands -c and -o together... yes [ 81s] checking for library containing strerror... none required [ 81s] checking for a BSD-compatible install... /usr/bin/install -c [ 81s] checking whether build environment is sane... yes [ 81s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 81s] checking for gawk... gawk [ 81s] checking whether make sets $(MAKE)... yes [ 81s] checking for style of include used by make... GNU [ 81s] checking whether make supports nested variables... yes [ 81s] checking dependency style of gcc... gcc3 [ 82s] checking whether make supports nested variables... (cached) yes [ 82s] checking for i686-tizen-linux-gnu-gcc... gcc [ 82s] checking whether we are using the GNU C compiler... (cached) yes [ 82s] checking whether gcc accepts -g... (cached) yes [ 82s] checking for gcc option to accept ISO C89... (cached) none needed [ 82s] checking whether gcc understands -c and -o together... (cached) yes [ 82s] checking for i686-tizen-linux-gnu-gcc... (cached) gcc [ 82s] checking whether we are using the GNU C compiler... (cached) yes [ 82s] checking whether gcc accepts -g... (cached) yes [ 82s] checking for gcc option to accept ISO C89... (cached) none needed [ 82s] checking whether gcc understands -c and -o together... (cached) yes [ 83s] checking how to run the C preprocessor... gcc -E [ 84s] checking for grep that handles long lines and -e... /usr/bin/grep [ 84s] checking for egrep... /usr/bin/grep -E [ 85s] checking for ANSI C header files... yes [ 85s] checking for an ANSI C-conforming const... yes [ 85s] checking for __attribute__... yes [ 85s] checking how to print strings... printf [ 85s] checking for a sed that does not truncate output... /usr/bin/sed [ 85s] checking for fgrep... /usr/bin/grep -F [ 85s] checking for ld used by gcc... /usr/i586-tizen-linux-gnu/bin/ld [ 85s] checking if the linker (/usr/i586-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 85s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 85s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 85s] checking whether ln -s works... yes [ 85s] checking the maximum length of command line arguments... 1572864 [ 85s] checking whether the shell understands some XSI constructs... yes [ 85s] checking whether the shell understands "+="... yes [ 85s] checking how to convert i686-tizen-linux-gnu file names to i686-tizen-linux-gnu format... func_convert_file_noop [ 85s] checking how to convert i686-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 85s] checking for /usr/i586-tizen-linux-gnu/bin/ld option to reload object files... -r [ 85s] checking for i686-tizen-linux-gnu-objdump... no [ 85s] checking for objdump... objdump [ 85s] checking how to recognize dependent libraries... pass_all [ 85s] checking for i686-tizen-linux-gnu-dlltool... no [ 85s] checking for dlltool... no [ 85s] checking how to associate runtime and link libraries... printf %s\n [ 85s] checking for i686-tizen-linux-gnu-ar... no [ 85s] checking for ar... ar [ 85s] checking for archiver @FILE support... @ [ 85s] checking for i686-tizen-linux-gnu-strip... no [ 85s] checking for strip... strip [ 85s] checking for i686-tizen-linux-gnu-ranlib... no [ 85s] checking for ranlib... ranlib [ 86s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 86s] checking for sysroot... no [ 86s] checking for i686-tizen-linux-gnu-mt... no [ 86s] checking for mt... no [ 86s] checking if : is a manifest tool... no [ 86s] checking for sys/types.h... yes [ 86s] checking for sys/stat.h... yes [ 86s] checking for stdlib.h... yes [ 86s] checking for string.h... yes [ 86s] checking for memory.h... yes [ 86s] checking for strings.h... yes [ 86s] checking for inttypes.h... yes [ 86s] checking for stdint.h... yes [ 86s] checking for unistd.h... yes [ 86s] checking for dlfcn.h... yes [ 86s] checking for objdir... .libs [ 87s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 87s] checking for gcc option to produce PIC... -fPIC -DPIC [ 87s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 87s] checking if gcc static flag -static works... no [ 87s] checking if gcc supports -c -o file.o... yes [ 87s] checking if gcc supports -c -o file.o... (cached) yes [ 87s] checking whether the gcc linker (/usr/i586-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 87s] checking whether -lc should be explicitly linked in... no [ 88s] checking dynamic linker characteristics... GNU/Linux ld.so [ 88s] checking how to hardcode library paths into programs... immediate [ 88s] checking whether stripping libraries is possible... yes [ 88s] checking if libtool supports shared libraries... yes [ 88s] checking whether to build shared libraries... yes [ 88s] checking whether to build static libraries... yes [ 88s] checking whether wayland-only version is enabled... checking for i686-tizen-linux-gnu-pkg-config... /usr/bin/i686-tizen-linux-gnu-pkg-config [ 88s] checking pkg-config is at least version 0.9.0... yes [ 88s] checking for ENLIGHTENMENT... yes [ 88s] checking for TTRACE... yes [ 88s] checking for dlopen in -ldl... yes [ 88s] checking whether ivi-home is enabled... yes [ 88s] checking whether auto rotation is enabled... yes [ 88s] checking for SENSORD... yes [ 89s] checking that generated files are newer than configure... done [ 89s] configure: creating ./config.status [ 89s] config.status: creating Makefile [ 89s] config.status: creating src/Makefile [ 89s] config.status: creating config.h [ 89s] config.status: executing depfiles commands [ 89s] config.status: executing libtool commands [ 91s] + make -j8 [ 91s] make all-recursive [ 91s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.0' [ 91s] Making all in src [ 91s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.0/src' [ 91s] CC module_la-e_mod_config.lo [ 91s] CC module_la-e_mod_main.lo [ 91s] CC module_la-e_mod_ivi_home.lo [ 91s] CC module_la-tizen_policy_ext-protocol.lo [ 91s] CC rotation/module_la-e_mod_rotation.lo [ 91s] CC rotation/module_la-e_mod_rotation_settings.lo [ 91s] CC rotation/module_la-e_mod_rotation_wl.lo [ 91s] CC rotation/module_la-e_mod_sensord.lo [ 93s] CCLD module.la [ 94s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.0/src' [ 94s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.0' [ 94s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.0' [ 94s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.0' [ 94s] + exit 0 [ 94s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.JJ4H2V [ 94s] + umask 022 [ 94s] + cd /home/abuild/rpmbuild/BUILD [ 94s] + cd e-mod-tizen-wm-policy-0.3.0 [ 94s] + LANG=C [ 94s] + export LANG [ 94s] + unset DISPLAY [ 94s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.0-5.1.i386 [ 94s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.0-5.1.i386 [ 94s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.0-5.1.i386//usr/share/license [ 94s] + cp -a /home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.0/COPYING /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.0-5.1.i386//usr/share/license/e-mod-tizen-wm-policy [ 94s] + cp -a /home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.0/COPYING.Flora /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.0-5.1.i386//usr/share/license/e-mod-tizen-wm-policy.Flora [ 94s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.0-5.1.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.0-5.1.i386 install [ 94s] Making install in src [ 94s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.0/src' [ 94s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.0/src' [ 94s] make[2]: Nothing to be done for 'install-exec-am'. [ 94s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.0-5.1.i386/usr/lib/enlightenment/modules/e-mod-tizen-wm-policy/linux-gnu-i686-ver-autocannoli-0.20' [ 94s] /bin/sh ../libtool --mode=install /usr/bin/install -c module.la '/home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.0-5.1.i386/usr/lib/enlightenment/modules/e-mod-tizen-wm-policy/linux-gnu-i686-ver-autocannoli-0.20' [ 94s] libtool: install: /usr/bin/install -c .libs/module.so /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.0-5.1.i386/usr/lib/enlightenment/modules/e-mod-tizen-wm-policy/linux-gnu-i686-ver-autocannoli-0.20/module.so [ 94s] libtool: install: /usr/bin/install -c .libs/module.lai /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.0-5.1.i386/usr/lib/enlightenment/modules/e-mod-tizen-wm-policy/linux-gnu-i686-ver-autocannoli-0.20/module.la [ 94s] libtool: install: /usr/bin/install -c .libs/module.a /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.0-5.1.i386/usr/lib/enlightenment/modules/e-mod-tizen-wm-policy/linux-gnu-i686-ver-autocannoli-0.20/module.a [ 94s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.0-5.1.i386/usr/lib/enlightenment/modules/e-mod-tizen-wm-policy/linux-gnu-i686-ver-autocannoli-0.20/module.a [ 94s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.0-5.1.i386/usr/lib/enlightenment/modules/e-mod-tizen-wm-policy/linux-gnu-i686-ver-autocannoli-0.20/module.a [ 94s] libtool: install: warning: remember to run `libtool --finish /usr/lib/enlightenment/modules/e-mod-tizen-wm-policy/linux-gnu-i686-ver-autocannoli-0.20' [ 94s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.0/src' [ 94s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.0/src' [ 94s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.0' [ 94s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.0' [ 94s] make[2]: Nothing to be done for 'install-exec-am'. [ 94s] make[2]: Nothing to be done for 'install-data-am'. [ 94s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.0' [ 94s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.0' [ 94s] + rm -f /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.0-5.1.i386/usr/share/info/dir [ 94s] + find /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.0-5.1.i386 -regex '.*\.la$' [ 94s] + xargs rm -f -- [ 94s] + find /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.0-5.1.i386 -regex '.*\.a$' [ 94s] + xargs rm -f -- [ 95s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/e-mod-tizen-wm-policy-0.3.0 [ 95s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.0-5.1.i386/usr/lib/enlightenment/modules/e-mod-tizen-wm-policy/linux-gnu-i686-ver-autocannoli-0.20/module.so [ 97s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 97s] cpio: glibc-2.20/sysdeps/i386/crti.S: Cannot stat: No such file or directory [ 97s] cpio: glibc-2.20/sysdeps/i386/crtn.S: Cannot stat: No such file or directory [ 97s] 173 blocks [ 97s] + /usr/lib/rpm/check-buildroot [ 97s] + /usr/lib/rpm//brp-compress [ 97s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 97s] + /usr/lib/rpm/brp-python-hardlink [ 97s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.0-5.1.i386 [ 97s] Processing files: e-mod-tizen-wm-policy-0.3.0-5.1.i686 [ 97s] Provides: e-mod-tizen-wm-policy = 0.3.0-5.1 e-mod-tizen-wm-policy(x86-32) = 0.3.0-5.1 module.so [ 97s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 97s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.3.4) libecore.so.1 libeet.so.1 libeina.so.1 libevas.so.1 libpthread.so.0 libsensor.so.2 libttrace.so.1 libvconf.so.0 libvconf.so.0(VCONF_BUXTON_1.0) [ 97s] Processing files: e-mod-tizen-wm-policy-debugsource-0.3.0-5.1.i686 [ 97s] Provides: e-mod-tizen-wm-policy-debugsource = 0.3.0-5.1 e-mod-tizen-wm-policy-debugsource(x86-32) = 0.3.0-5.1 [ 97s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 97s] Processing files: e-mod-tizen-wm-policy-debuginfo-0.3.0-5.1.i686 [ 97s] Provides: e-mod-tizen-wm-policy-debuginfo = 0.3.0-5.1 e-mod-tizen-wm-policy-debuginfo(x86-32) = 0.3.0-5.1 [ 97s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 97s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.0-5.1.i386 [ 98s] Wrote: /home/abuild/rpmbuild/SRPMS/e-mod-tizen-wm-policy-0.3.0-5.1.src.rpm [ 98s] Wrote: /home/abuild/rpmbuild/RPMS/i686/e-mod-tizen-wm-policy-0.3.0-5.1.i686.rpm [ 98s] Wrote: /home/abuild/rpmbuild/RPMS/i686/e-mod-tizen-wm-policy-debugsource-0.3.0-5.1.i686.rpm [ 98s] Wrote: /home/abuild/rpmbuild/RPMS/i686/e-mod-tizen-wm-policy-debuginfo-0.3.0-5.1.i686.rpm [ 98s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.lVkZj4 [ 98s] + umask 022 [ 98s] + cd /home/abuild/rpmbuild/BUILD [ 98s] + cd e-mod-tizen-wm-policy-0.3.0 [ 98s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/e-mod-tizen-wm-policy-0.3.0-5.1.i386 [ 98s] + exit 0 [ 98s] ... checking for files with abuild user/group [ 98s] [ 98s] RPMLINT report: [ 98s] =============== [ 99s] e-mod-tizen-wm-policy.i686: W: description-shorter-than-summary [ 99s] e-mod-tizen-wm-policy.src: W: description-shorter-than-summary [ 99s] The package description should be longer than the summary. be a bit more [ 99s] verbose, please. [ 99s] [ 99s] 2 packages and 0 specfiles checked; 0 errors, 2 warnings. [ 99s] [ 99s] ... creating baselibs [ 99s] ... comparing built packages with the former built [ 99s] /usr/lib/build/pkg-diff.sh [ 99s] compare /.build.oldpackages/e-mod-tizen-wm-policy-0.2.39-4.3.src.rpm /home/abuild/rpmbuild/SRPMS/e-mod-tizen-wm-policy-0.3.0-5.1.src.rpm [ 99s] This is not a prerelease project. Compare the project name. [ 99s] comparing rpmtags [ 99s] comparing RELEASE [ 100s] comparing PROVIDES [ 100s] comparing scripts [ 100s] comparing filelist [ 100s] comparing file checksum [ 100s] RPM meta information is identical [ 100s] compare /.build.oldpackages/e-mod-tizen-wm-policy-0.2.39-4.3.i686.rpm /home/abuild/rpmbuild/RPMS/i686/e-mod-tizen-wm-policy-0.3.0-5.1.i686.rpm [ 100s] Comparing e-mod-tizen-wm-policy-0.2.39-4.3.i686.rpm to e-mod-tizen-wm-policy-0.3.0-5.1.i686.rpm [ 100s] This is not a prerelease project. Compare the project name. [ 100s] comparing rpmtags [ 100s] --- /tmp/tmp.HKQVhz5500/tmp.RXgzVE5512 2016-11-23 00:38:47.070245181 +0000 [ 100s] +++ /tmp/tmp.HKQVhz5500/tmp.UdkNYp5513 2016-11-23 00:38:47.166245178 +0000 [ 100s] @@ -1,4 +1,4 @@ [ 100s] -e-mod-tizen-wm-policy 0.2.39 (none) [ 100s] +e-mod-tizen-wm-policy 0.3.0 (none) [ 100s] The Enlightenment WM Policy Module for Tizen [ 100s] The Enlightenment WM Policy Module for Tizen [ 100s] tizen [ 100s] @@ -8,4 +8,4 @@ [ 100s] cpio lzma 5 [ 100s] [ 100s] (none) (none) (none) [ 100s] -obs://build.tizen.org/Tizen:3.0:Wearable/emulator-circle/a97c55bb8fd68d49f55553ca105a8c2c-e-mod-tizen-wm-policy Tizen:3.0:Wearable / emulator-circle [ 100s] +obs://build.tizen.org/Tizen:3.0:Wearable/emulator-circle/9692b57a21c31c43660951cdb6b28708-e-mod-tizen-wm-policy Tizen:3.0:Wearable / emulator-circle [ 100s] RPM meta information is different [ 100s] compare /.build.oldpackages/e-mod-tizen-wm-policy-debuginfo-0.2.39-4.3.i686.rpm /home/abuild/rpmbuild/RPMS/i686/e-mod-tizen-wm-policy-debuginfo-0.3.0-5.1.i686.rpm [ 100s] skipping -debuginfo package [ 100s] compare /.build.oldpackages/e-mod-tizen-wm-policy-debugsource-0.2.39-4.3.i686.rpm /home/abuild/rpmbuild/RPMS/i686/e-mod-tizen-wm-policy-debugsource-0.3.0-5.1.i686.rpm [ 100s] Comparing e-mod-tizen-wm-policy-debugsource-0.2.39-4.3.i686.rpm to e-mod-tizen-wm-policy-debugsource-0.3.0-5.1.i686.rpm [ 100s] This is not a prerelease project. Compare the project name. [ 100s] comparing rpmtags [ 100s] --- /tmp/tmp.LVUWpj5531/tmp.wVUMkL5543 2016-11-23 00:38:47.494245168 +0000 [ 100s] +++ /tmp/tmp.LVUWpj5531/tmp.xklLpT5544 2016-11-23 00:38:47.506245168 +0000 [ 100s] @@ -1,4 +1,4 @@ [ 100s] -e-mod-tizen-wm-policy-debugsource 0.2.39 (none) [ 100s] +e-mod-tizen-wm-policy-debugsource 0.3.0 (none) [ 100s] Debug sources for package e-mod-tizen-wm-policy [ 100s] This package provides debug sources for package e-mod-tizen-wm-policy. [ 100s] Debug sources are useful when developing applications that use this [ 100s] @@ -10,4 +10,4 @@ [ 100s] cpio lzma 5 [ 100s] [ 100s] (none) (none) (none) [ 100s] -obs://build.tizen.org/Tizen:3.0:Wearable/emulator-circle/a97c55bb8fd68d49f55553ca105a8c2c-e-mod-tizen-wm-policy Tizen:3.0:Wearable / emulator-circle [ 100s] +obs://build.tizen.org/Tizen:3.0:Wearable/emulator-circle/9692b57a21c31c43660951cdb6b28708-e-mod-tizen-wm-policy Tizen:3.0:Wearable / emulator-circle [ 100s] RPM meta information is different [ 100s] comparing /.build.oldpackages/rpmlint.log and /home/abuild/rpmbuild/OTHER/rpmlint.log [ 101s] ... saving built statistics [ 101s] ... saving built packages [ 102s] /home/abuild/rpmbuild/RPMS/i686/e-mod-tizen-wm-policy-0.3.0-5.1.i686.rpm [ 103s] /home/abuild/rpmbuild/RPMS/i686/e-mod-tizen-wm-policy-debuginfo-0.3.0-5.1.i686.rpm [ 103s] /home/abuild/rpmbuild/RPMS/i686/e-mod-tizen-wm-policy-debugsource-0.3.0-5.1.i686.rpm [ 103s] /home/abuild/rpmbuild/SRPMS/e-mod-tizen-wm-policy-0.3.0-5.1.src.rpm [ 103s] /home/abuild/rpmbuild/OTHER/_statistics [ 103s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 105s] [ 105s] w03 finished "build e-mod-tizen-wm-policy.spec" at Wed Nov 23 00:38:51 UTC 2016. [ 105s] [ 110s] Powering off. [ 110s] [ 102.480321] Power down. [ 111s] build: extracting built packages... [ 114s] e-mod-tizen-wm-policy-0.3.0-5.1.i686.rpm [ 114s] e-mod-tizen-wm-policy-debuginfo-0.3.0-5.1.i686.rpm [ 114s] e-mod-tizen-wm-policy-debugsource-0.3.0-5.1.i686.rpm [ 114s] e-mod-tizen-wm-policy-0.3.0-5.1.src.rpm [ 114s] _statistics [ 114s] rpmlint.log Retried build at Wed Nov 23 00:35:56 2016 returned same result, skipped Retried build at Wed Nov 23 00:48:44 2016 returned same result, skipped Retried build at Wed Nov 23 19:18:18 2016 returned same result, skipped