[ 0s] Using BUILD_ROOT=/srv/build/root_9/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_9/root [ 0s] [ 0s] [ 0s] w15 started "build _service:gbs:tizen-debug.spec" at Fri Dec 16 23:50:32 UTC 2016. [ 0s] [ 0s] Building tizen-debug for project 'Tizen:3.0:Wearable' repository 'target-circle' arch 'armv7l' srcmd5 '94ca4633a92a248907db41dac5da7929' [ 0s] [ 0s] processing specfile /srv/build/root_9/.build-srcdir/_service:gbs:tizen-debug.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_9/.build-srcdir/_service:gbs:tizen-debug.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/9/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_9/.build.rpmlist /srv/build/root_9/.build-srcdir/_service:gbs:tizen-debug.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] Copying qemu-fix-build-hang.sh [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling libgcc... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libbz2... [ 1s] [11/40] preinstalling libcap... [ 1s] [12/40] preinstalling libelf... [ 1s] [13/40] preinstalling libfreebl3... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling zlib... [ 1s] [24/40] preinstalling qemu-accel-x86_64-armv7l... [ 5s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 6s] [26/40] preinstalling coreutils... [ 6s] [27/40] preinstalling libacl... [ 6s] [28/40] preinstalling libblkid... [ 6s] [29/40] preinstalling libreadline... [ 6s] [30/40] preinstalling smack... [ 6s] [31/40] preinstalling bzip2... [ 6s] [32/40] preinstalling libmagic... [ 6s] [33/40] preinstalling libxml2... [ 6s] [34/40] preinstalling libmount... [ 6s] [35/40] preinstalling tar... [ 6s] [36/40] preinstalling util-linux... [ 6s] [37/40] preinstalling util-linux-su... [ 6s] [38/40] preinstalling nss... [ 6s] [39/40] preinstalling libsoftokn3... [ 6s] [40/40] preinstalling rpm... [ 6s] [ 6s] [1/9] preinstalling libext2fs... [ 6s] [2/9] preinstalling libpcre... [ 6s] [3/9] preinstalling libsmartcols... [ 6s] [4/9] preinstalling libuuid... [ 6s] [5/9] preinstalling perl... [ 7s] [6/9] preinstalling grep... [ 7s] [7/9] preinstalling libblkid... [ 7s] [8/9] preinstalling libmount... [ 7s] [9/9] preinstalling util-linux... [ 7s] copying packages... [ 8s] reordering...cycle: nss -> libsoftokn3 [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 11s] booting kvm ... [ 11s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 6000 -drive file=/srv/build/root_9/root,if=virtio,cache=none -drive file=/srv/build/root_9/root,if=ide,index=0,cache=none -drive file=/srv/build/root_9/swap,if=virtio,cache=none -smp 4 [ 15s] doing fast boot [ 15s] Creating device nodes with udev [ 15s] Waiting for device /dev/vda to appear: ok [ 15s] fsck from util-linux 2.21.2 [ 15s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 15s] /dev/vda: clean, 5001/2392064 files, 262858/9568256 blocks [ 15s] fsck succeeded. Mounting root device read-write. [ 15s] Mounting root /dev/vda [ 15s] mount -o rw -t ext4 /dev/vda /root [ 15s] replacing /etc/mtab with symlink to /proc/self/mounts [ 15s] 2nd stage started in virtual machine [ 15s] machine type: armv7l [ 15s] swapon: /dev/vdb: found signature [pagesize=4096, signature=swap] [ 15s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 15s] swapon /dev/vdb [ 16s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 16s] mount: none is already mounted or /proc busy [ 16s] mount: none is already mounted or /dev/pts busy [ 16s] logging output to //.build.log... [ 16s] processing specfile /.build-srcdir/_service:gbs:tizen-debug.spec ... [ 16s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:tizen-debug.spec build rpmlint-Factory ... [ 17s] running qemu-linux-user-x86_64-cross postinstall script [ 17s] running qemu-accel-x86_64-armv7l postinstall script [ 17s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so': No such file or directory [ 17s] running setup postinstall script [ 17s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 17s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 17s] initializing rpm db... [ 18s] [1/92] installing glibc-debuginfo-2.20-2.1 [ 19s] [2/92] installing libmagic-data-5.28-2.1 [ 19s] [3/92] installing setup-0.9-1.3 [ 19s] [4/92] installing terminfo-base-5.9-1.1 [ 19s] [5/92] installing filesystem-3.1-8.1 [ 19s] [6/92] installing glibc-2.20-2.1 [ 19s] [7/92] installing libatomic-4.9.2-2.2 [ 19s] [8/92] installing libgcc-4.9.2-2.2 [ 19s] [9/92] installing libgomp-4.9.2-2.2 [ 19s] [10/92] installing bash-3.2.57-1.1 [ 19s] [11/92] installing cpio-2.11-1.1 [ 19s] [12/92] installing diffutils-3.3-1.1 [ 19s] [13/92] installing findutils-4.3.8-1.1 [ 19s] [14/92] installing hostname-3.12-1.1 [ 19s] [15/92] installing libattr-2.4.47-2.1 [ 20s] [16/92] installing libbz2-1.0.6-1.9 [ 20s] [17/92] installing libcap-2.24-1.1 [ 20s] [18/92] installing libelf-0.153-1.8 [ 20s] [19/92] installing libext2fs-1.42.13-2.1 [ 20s] [20/92] installing libfreebl3-3.23-1.8 [ 20s] [21/92] installing libitm-4.9.2-2.2 [ 20s] [22/92] installing libltdl-2.4.2-1.1 [ 20s] [23/92] installing liblua-5.1.4-1.1 [ 20s] [24/92] installing liblzma-5.1.3-1.1 [ 20s] [25/92] installing libpcre-8.39-1.1 [ 21s] [26/92] installing libpopt-1.16-1.1 [ 21s] [27/92] installing libsmack-1.3.0-2.1 [ 21s] [28/92] installing libsmartcols-2.28-1.1 [ 21s] [29/92] installing libsqlite-3.8.10.2-1.1 [ 22s] [30/92] installing libstdc++-4.9.2-2.2 [ 22s] [31/92] installing libuuid-2.28-1.1 [ 22s] [32/92] installing m4-1.4.17-1.1 [ 22s] [33/92] installing net-tools-2.0_20121208git-1.1 [ 22s] [34/92] installing nspr-4.12-1.3 [ 22s] [35/92] installing patch-2.7-1.1 [ 22s] [36/92] installing pkg-config-0.28-1.1 [ 23s] [37/92] installing sed-4.1c-1.1 [ 23s] [38/92] installing update-alternatives-1.16.3-1.1 [ 23s] [39/92] installing which-2.20-1.1 [ 23s] [40/92] installing zlib-1.2.8-1.1 [ 23s] [41/92] installing libncurses-5.9-1.1 [ 24s] [42/92] installing build-compare-2015.04.28-2.4 [ 24s] [43/92] installing libstdc++-devel-4.9.2-2.2 [ 24s] [44/92] installing qemu-linux-user-x86_64-cross-2.7.0-1.2.1 [ 31s] [45/92] installing cpp-4.9.2-2.2 [ 33s] [46/92] installing gcc-c++-4.9.2-2.2 [ 34s] [47/92] installing binutils-2.25-1.4 [ 35s] [48/92] installing coreutils-6.9-1.1 [ 35s] [49/92] installing db4-4.8.30.NC-1.1 [ 36s] [50/92] installing gawk-3.1.5-1.1 [ 36s] [51/92] installing grep-2.5.2-1.1 [ 36s] [52/92] installing less-466-1.1 [ 36s] [53/92] installing libacl-2.2.52-1.1 [ 37s] [54/92] installing libasm-0.153-1.8 [ 37s] [55/92] installing libblkid-2.28-1.1 [ 37s] [56/92] installing libreadline-5.2-1.1 [ 38s] [57/92] installing libubsan-4.9.2-2.2 [ 38s] [58/92] installing make-4.0-1.1 [ 38s] [59/92] installing nss-certs-3.23-1.8 [ 38s] [60/92] installing smack-1.3.0-2.1 [ 38s] [61/92] installing bzip2-1.0.6-1.9 [ 39s] [62/92] installing libmagic-5.28-2.1 [ 39s] [63/92] installing libxml2-2.9.4-1.1 [ 39s] [64/92] installing xz-5.1.3-1.1 [ 39s] [65/92] installing libdw-0.153-1.8 [ 39s] [66/92] installing linux-glibc-devel-3.10-1.1 [ 40s] [67/92] installing file-5.28-2.1 [ 40s] [68/92] installing glibc-locale-2.20-2.1 [ 40s] [69/92] installing libmount-2.28-1.1 [ 40s] [70/92] installing tar-1.17-1.1 [ 40s] [71/92] installing gzip-1.3.12-1.1 [ 40s] [72/92] installing libfdisk1-2.28-1.1 [ 41s] [73/92] installing pam-1.1.6-2.1 [ 41s] [74/92] installing perl-5.20.0-1.8 [ 44s] [75/92] installing tzdata-2016i-2.1 [ 45s] [76/92] installing elfutils-0.153-1.8 [ 45s] [77/92] installing gcc-4.9.2-2.2 [ 48s] [78/92] installing build-mkbaselibs-20120927-1.1 [ 49s] [79/92] installing glibc-devel-2.20-2.1 [ 50s] [80/92] installing qemu-accel-x86_64-armv7l-0.4-4.3 [ 57s] [81/92] installing autoconf-2.69-1.2 [ 58s] [82/92] installing util-linux-2.28-1.1 [ 58s] [83/92] installing automake-1.14.1-1.1 [ 59s] [84/92] installing util-linux-su-2.28-1.1 [ 59s] [85/92] installing build-20120927-1.1 [ 59s] [86/92] installing libtool-2.4.2-1.1 [ 59s] [87/92] installing nss-3.23-1.8 [ 59s] [88/92] installing libsoftokn3-3.23-1.8 [ 60s] [89/92] installing rpm-4.11.0.1-1.1 [ 61s] [90/92] installing rpmlint-mini-1.5-1.3 [ 62s] [91/92] installing rpm-build-4.11.0.1-1.1 [ 62s] [92/92] installing rpmlint-tizen-1.0-1.1 [ 62s] removing nis flags from //etc/nsswitch.conf... [ 63s] now finalizing build dir... [ 68s] build target is armv7l-tizen-linux [ 68s] ----------------------------------------------------------------- [ 68s] I have the following modifications for tizen-debug.spec: [ 68s] 8c8 [ 68s] < Release: 1 [ 68s] --- [ 68s] > Release: 1.2 [ 68s] ----------------------------------------------------------------- [ 68s] ----- building tizen-debug.spec (user abuild) [ 68s] ----------------------------------------------------------------- [ 68s] ----------------------------------------------------------------- [ 68s] Running qemu build hang workaround... [ 68s] /bin/ps command not found [ 69s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0:Wearable/target-circle/94ca4633a92a248907db41dac5da7929-tizen-debug' /home/abuild/rpmbuild/SOURCES/tizen-debug.spec [ 69s] Building target platforms: armv7l-tizen-linux [ 69s] Building for target armv7l-tizen-linux [ 69s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.lD8Y7S [ 69s] + umask 022 [ 69s] + cd /home/abuild/rpmbuild/BUILD [ 69s] + cd /home/abuild/rpmbuild/BUILD [ 69s] + rm -rf tizen-debug-2.20 [ 69s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/tizen-debug-2.20.tar.gz [ 69s] + /bin/tar -xf - [ 69s] + STATUS=0 [ 69s] + '[' 0 -ne 0 ']' [ 69s] + cd tizen-debug-2.20 [ 69s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 69s] + exit 0 [ 69s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.1wndgd [ 69s] + umask 022 [ 69s] + cd /home/abuild/rpmbuild/BUILD [ 69s] + cd tizen-debug-2.20 [ 69s] + LANG=C [ 69s] + export LANG [ 69s] + unset DISPLAY [ 69s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.2.arm [ 69s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.2.arm [ 69s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.2.arm//usr/lib/debug/lib [ 69s] + objcopy -j .note.gnu.build-id -j .debug_frame /usr/lib/debug/lib/libc-2.20-2014.11.so.debug /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.2.arm/usr/lib/debug/lib/libc-2.20-2014.11.so.debug [ 69s] BFD: /usr/lib/debug/lib/libc-2.20-2014.11.so.debug: warning: Empty loadable segment detected, is this intentional ? [ 69s] [ 69s] + cp /usr/lib/debug/lib/ld-2.20-2014.11.so.debug /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.2.arm/usr/lib/debug/lib/ld-2.20-2014.11.so.debug [ 69s] + chmod 444 /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.2.arm/usr/lib/debug/lib/ld-2.20-2014.11.so.debug /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.2.arm/usr/lib/debug/lib/libc-2.20-2014.11.so.debug [ 69s] + for file in /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.2.arm/usr/lib/debug/lib/ld-2.20-2014.11.so.debug /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.2.arm/usr/lib/debug/lib/libc-2.20-2014.11.so.debug [ 69s] ++ readelf -n /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.2.arm/usr/lib/debug/lib/ld-2.20-2014.11.so.debug [ 69s] ++ grep 'Build ID' [ 69s] ++ awk '{print $3}' [ 69s] + BuildID=8d96bd9b26f72c9fc65e595b9e065f91698c046b [ 69s] ++ echo 8d96bd9b26f72c9fc65e595b9e065f91698c046b [ 69s] ++ cut -b-2 [ 69s] + Dir=8d [ 69s] ++ echo 8d96bd9b26f72c9fc65e595b9e065f91698c046b [ 69s] ++ cut -b3- [ 69s] + File=96bd9b26f72c9fc65e595b9e065f91698c046b [ 69s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.2.arm/usr/lib/debug/.build-id/8d [ 69s] + cp -d /usr/lib/debug/.build-id/8d/96bd9b26f72c9fc65e595b9e065f91698c046b.debug /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.2.arm/usr/lib/debug/.build-id/8d [ 69s] + for file in /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.2.arm/usr/lib/debug/lib/ld-2.20-2014.11.so.debug /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.2.arm/usr/lib/debug/lib/libc-2.20-2014.11.so.debug [ 69s] ++ readelf -n /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.2.arm/usr/lib/debug/lib/libc-2.20-2014.11.so.debug [ 69s] ++ grep 'Build ID' [ 69s] readelf: Error: no .dynamic section in the dynamic segment [ 69s] ++ awk '{print $3}' [ 69s] + BuildID=d47b43e894eab61dc5d618150714757c70dbec82 [ 69s] ++ echo d47b43e894eab61dc5d618150714757c70dbec82 [ 69s] ++ cut -b-2 [ 69s] + Dir=d4 [ 69s] ++ echo d47b43e894eab61dc5d618150714757c70dbec82 [ 69s] ++ cut -b3- [ 69s] + File=7b43e894eab61dc5d618150714757c70dbec82 [ 69s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.2.arm/usr/lib/debug/.build-id/d4 [ 69s] + cp -d /usr/lib/debug/.build-id/d4/7b43e894eab61dc5d618150714757c70dbec82.debug /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.2.arm/usr/lib/debug/.build-id/d4 [ 69s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/tizen-debug-2.20 [ 69s] + /usr/lib/rpm/check-buildroot [ 69s] + /usr/lib/rpm//brp-compress [ 69s] + /usr/lib/rpm/brp-strip-static-archive /bin/true [ 69s] + /usr/lib/rpm/brp-python-hardlink [ 69s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.2.arm [ 69s] Processing files: tizen-debug-2.20-1.2.armv7l [ 69s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 69s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 69s] [ 69s] Provides: tizen-debug = 2.20-1.2 tizen-debug(armv7l-32) = 2.20-1.2 [ 69s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 69s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.2.arm [ 69s] warning: Could not canonicalize hostname: w15 [ 69s] Wrote: /home/abuild/rpmbuild/SRPMS/tizen-debug-2.20-1.2.src.rpm [ 69s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/tizen-debug-2.20-1.2.armv7l.rpm [ 69s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.L59Huf [ 69s] + umask 022 [ 69s] + cd /home/abuild/rpmbuild/BUILD [ 69s] + cd tizen-debug-2.20 [ 69s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/tizen-debug-2.20-1.2.arm [ 69s] + exit 0 [ 69s] ... checking for files with abuild user/group [ 69s] [ 69s] RPMLINT report: [ 69s] =============== [ 70s] tizen-debug.armv7l: E: summary-not-capitalized (Badness: 63) C libc debug information with .debug_frame section only and ld debug information [ 70s] tizen-debug.src: E: summary-not-capitalized (Badness: 63) C libc debug information with .debug_frame section only and ld debug information [ 70s] Summary doesn't begin with a capital letter. [ 70s] [ 70s] tizen-debug.armv7l: W: shared-lib-without-dependency-information /usr/lib/debug/lib/libc-2.20-2014.11.so.debug [ 70s] tizen-debug.armv7l: W: shared-lib-without-dependency-information /usr/lib/debug/lib/ld-2.20-2014.11.so.debug [ 70s] tizen-debug.src: W: no-%build-section [ 70s] The spec file does not contain a %build section. Even if some packages don't [ 70s] directly need it, section markers may be overridden in rpm's configuration to [ 70s] provide additional "under the hood" functionality, such as injection of [ 70s] automatic -debuginfo subpackages. Add the section, even if empty. [ 70s] [ 70s] tizen-debug.src:1: W: macro-in-comment %define [ 70s] tizen-debug.src:1: W: macro-in-comment %{nil} [ 70s] tizen-debug.src:2: W: macro-in-comment %define [ 70s] There is a unescaped macro after a shell style comment in the specfile. Macros [ 70s] are expanded everywhere, so check if it can cause a problem in this case and [ 70s] escape the macro with another leading % if appropriate. [ 70s] [ 70s] tizen-debug.src: W: invalid-url Source0: tizen-debug-2.20.tar.gz [ 70s] The value should be a valid, public HTTP, HTTPS, or FTP URL. [ 70s] [ 70s] tizen-debug.armv7l: E: invalid-license (Badness: 200) LGPLv2+ [ 70s] tizen-debug.armv7l: E: invalid-license (Badness: 200) LGPLv2+ with exceptions [ 70s] tizen-debug.armv7l: E: invalid-license (Badness: 200) GPLv2+ [ 70s] tizen-debug.src: E: invalid-license (Badness: 200) LGPLv2+ [ 70s] tizen-debug.src: E: invalid-license (Badness: 200) LGPLv2+ with exceptions [ 70s] tizen-debug.src: E: invalid-license (Badness: 200) GPLv2+ [ 70s] The specified license string is not recognized. Please refer to [ 70s] http://spdx.org/licenses/ for the list of known licences and their exact [ 70s] spelling. [ 70s] [ 70s] tizen-debug.armv7l: W: debuginfo-without-sources [ 70s] This debuginfo package appears to contain debug symbols but no source files. [ 70s] This is often a sign of binaries being unexpectedly stripped too early during [ 70s] the build, or being compiled without compiler debug flags (which again often [ 70s] is a sign of distro's default compiler flags ignored which might have security [ 70s] consequences), or other compiler flags which result in rpmbuild's debuginfo [ 70s] extraction not working as expected. Verify that the binaries are not [ 70s] unexpectedly stripped and that the intended compiler flags are used. [ 70s] [ 70s] 2 packages and 0 specfiles checked; 8 errors, 8 warnings. [ 70s] [ 70s] ... creating baselibs [ 71s] ... comparing built packages with the former built [ 71s] /usr/lib/build/pkg-diff.sh [ 71s] /usr/lib/build/same-build-result.sh: line 36: is_prerelease_project: command not found [ 71s] This is a prerelease project. Do not check the existence of source rpm files. [ 71s] compare /.build.oldpackages/tizen-debug-2.20-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/tizen-debug-2.20-1.2.armv7l.rpm [ 71s] Comparing tizen-debug-2.20-1.1.armv7l.rpm to tizen-debug-2.20-1.2.armv7l.rpm [ 72s] This is not a prerelease project. Compare the project name. [ 72s] comparing rpmtags [ 72s] comparing RELEASE [ 72s] comparing PROVIDES [ 72s] comparing scripts [ 72s] comparing filelist [ 72s] --- /tmp/tmp.ZgQwOF1703/tmp.LEdMGB1721 2016-12-16 23:51:43.429022581 +0000 [ 72s] +++ /tmp/tmp.ZgQwOF1703/tmp.IPqHPX1723 2016-12-16 23:51:43.441022581 +0000 [ 72s] @@ -1,7 +1,7 @@ [ 72s] -/usr/lib/debug/.build-id/1f 0 (none) 40755 root root 0 4294967295 [ 72s] -/usr/lib/debug/.build-id/1f/59b6111d8caa4f36198b03b77db7c77c56d376.debug 0 (none) 120777 root root 0 4294967295 ../../lib/ld-2.20-2014.11.so.debug [ 72s] -/usr/lib/debug/.build-id/75 0 (none) 40755 root root 0 4294967295 [ 72s] -/usr/lib/debug/.build-id/75/e3c5a0575b657a3134c291d855fb865126ec6a.debug 0 (none) 120777 root root 0 4294967295 ../../lib/libc-2.20-2014.11.so.debug [ 72s] +/usr/lib/debug/.build-id/8d 0 (none) 40755 root root 0 4294967295 [ 72s] +/usr/lib/debug/.build-id/8d/96bd9b26f72c9fc65e595b9e065f91698c046b.debug 0 (none) 120777 root root 0 4294967295 ../../lib/ld-2.20-2014.11.so.debug [ 72s] +/usr/lib/debug/.build-id/d4 0 (none) 40755 root root 0 4294967295 [ 72s] +/usr/lib/debug/.build-id/d4/7b43e894eab61dc5d618150714757c70dbec82.debug 0 (none) 120777 root root 0 4294967295 ../../lib/libc-2.20-2014.11.so.debug [ 72s] /usr/lib/debug/lib/ld-2.20-2014.11.so.debug 0 (none) 100444 root root 0 4294967295 [ 72s] /usr/lib/debug/lib/libc-2.20-2014.11.so.debug 0 (none) 100444 root root 0 4294967295 [ 72s] [ 72s] RPM meta information is different [ 72s] do not compare rpmlint.log if it is a prerelease project! [ 72s] ... saving built statistics [ 72s] ... saving built packages [ 72s] /home/abuild/rpmbuild/RPMS/armv7l/tizen-debug-2.20-1.2.armv7l.rpm [ 72s] /home/abuild/rpmbuild/SRPMS/tizen-debug-2.20-1.2.src.rpm [ 72s] /home/abuild/rpmbuild/OTHER/_statistics [ 72s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 72s] [ 72s] w15 finished "build tizen-debug.spec" at Fri Dec 16 23:51:43 UTC 2016. [ 72s] [ 75s] [ 60.865145] SysRq : Power Off [ 75s] [ 60.972394] Power down. [ 75s] build: extracting built packages... [ 75s] tizen-debug-2.20-1.2.armv7l.rpm [ 75s] tizen-debug-2.20-1.2.src.rpm [ 75s] _statistics [ 75s] rpmlint.log