[    0s] Memory limit set to 82442244KB
[    0s] Using BUILD_ROOT=/var/cache/build/root_2
[    0s] Using BUILD_ARCH=i586:i486:i386
[    0s] 
[    0s] 
[    0s] obsnw15 started "build _service:gbs:dracut.spec" at Tue Sep 26 18:12:12 UTC 2017.
[    0s] 
[    0s] Building dracut for project 'Tizen:4.0:Unified' repository 'emulator' arch 'i586' srcmd5 '36ed83edd3d6a07e17a0053f6dfcc4ba'
[    0s] 
[    0s] processing recipe /var/cache/build/root_2/.build-srcdir/_service:gbs:dracut.spec ...
[    0s] running changelog2spec --target rpm --file /var/cache/build/root_2/.build-srcdir/_service:gbs:dracut.spec
[    0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_2/.build.rpmlist /var/cache/build/root_2/.build-srcdir/_service:gbs:dracut.spec build rpmlint-Factory ...
[    0s] copying qemu
[    0s]  /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh
[    0s] 
[    1s] cycle: libsoftokn3 -> nss
[    1s]   breaking dependency nss -> libsoftokn3
[    1s] [1/35] preinstalling libmagic-data...
[    1s] [2/35] preinstalling setup...
[    1s] [3/35] preinstalling filesystem...
[    1s] [4/35] preinstalling glibc...
[    1s] [5/35] preinstalling bash...
[    1s] [6/35] preinstalling diffutils...
[    1s] [7/35] preinstalling grep...
[    1s] [8/35] preinstalling libattr...
[    1s] [9/35] preinstalling libbz2...
[    1s] [10/35] preinstalling libcap...
[    1s] [11/35] preinstalling libelf...
[    1s] [12/35] preinstalling libfreebl3...
[    2s] [13/35] preinstalling libgcc...
[    2s] [14/35] preinstalling liblua...
[    2s] [15/35] preinstalling liblzma...
[    2s] [16/35] preinstalling libncurses...
[    2s] [17/35] preinstalling libpopt...
[    2s] [18/35] preinstalling libsmack...
[    2s] [19/35] preinstalling libsqlite...
[    2s] [20/35] preinstalling nspr...
[    2s] [21/35] preinstalling sed...
[    2s] [22/35] preinstalling zlib...
[    2s] [23/35] preinstalling coreutils...
[    2s] [24/35] preinstalling libacl...
[    2s] [25/35] preinstalling libreadline...
[    2s] [26/35] preinstalling smack...
[    2s] [27/35] preinstalling bzip2...
[    2s] [28/35] preinstalling libmagic...
[    2s] [29/35] preinstalling libxml2...
[    2s] [30/35] preinstalling tar...
[    2s] [31/35] preinstalling util-linux...
[    2s] [32/35] preinstalling util-linux-su...
[    2s] [33/35] preinstalling nss...
[    2s] [34/35] preinstalling libsoftokn3...
[    3s] [35/35] preinstalling rpm...
[    3s] 
[    3s] running setup postinstall script
[    3s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name'
[    3s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do'
[    3s] initializing rpm db...
[    3s] reordering...cycle: libsoftokn3 -> nss
[    3s]   breaking dependency nss -> libsoftokn3
[    3s] done
[    3s] [1/121] installing libmagic-data-5.31-3.19
[    3s] [2/121] installing setup-0.9-2.4
[    4s] [3/121] installing filesystem-3.1-2.1
[    4s] [4/121] installing glibc-2.24-3.11
[    4s] [5/121] installing bash-3.2.57-3.1
[    4s] [6/121] installing binutils-2.27-3.15
[    4s] [7/121] installing cpio-2.11-2.1
[    4s] [8/121] installing diffutils-3.3-2.1
[    5s] [9/121] installing findutils-4.3.8-3.20
[    5s] [10/121] installing hostname-3.12-2.1
[    5s] [11/121] installing libatomic-6.2.1-3.3
[    5s] [12/121] installing libattr-2.4.47-1.1
[    5s] [13/121] installing libbz2-1.0.6-2.42
[    5s] [14/121] installing libcap-2.24-2.47
[    5s] [15/121] installing libcares-1.12.0-2.1
[    5s] [16/121] installing libelf-0.153-2.14
[    5s] [17/121] installing libexpat-2.2.0-2.42
[    5s] [18/121] installing libext2fs-1.43.4-2.1
[    5s] [19/121] installing libfreebl3-3.23-2.27
[    5s] [20/121] installing libgcc-6.2.1-3.3
[    5s] [21/121] installing libgomp-6.2.1-3.3
[    5s] [22/121] installing libgpg-error-1.13-2.13
[    6s] [23/121] installing libitm-6.2.1-3.3
[    6s] [24/121] installing libltdl-2.4.2-2.38
[    6s] [25/121] installing liblua-5.1.4-2.6
[    6s] [26/121] installing liblzma-5.2.2-2.38
[    6s] [27/121] installing libpcre-8.39-2.1
[    6s] [28/121] installing libpopt-1.16-2.6
[    6s] [29/121] installing libpython-2.7.8-2.6
[    6s] [30/121] installing libquadmath-6.2.1-3.3
[    6s] [31/121] installing libsmack-1.3.0-2.43
[    6s] [32/121] installing libsmartcols-2.30-3.1
[    6s] [33/121] installing libsqlite-3.18.0-3.4
[    6s] [34/121] installing libuuid-2.30-3.1
[    7s] [35/121] installing m4-1.4.17-2.1
[    7s] [36/121] installing net-tools-2.0_20121208git-2.1
[    7s] [37/121] installing nghttp2-1.20.0-2.1
[    7s] [38/121] installing nspr-4.12-2.6
[    7s] [39/121] installing patch-2.7-2.6
[    7s] [40/121] installing pkg-config-0.28-3.18
[    7s] [41/121] installing sed-4.1c-2.1
[    7s] [42/121] installing update-alternatives-1.18.15-2.1
[    7s] [43/121] installing which-2.20-2.1
[    7s] [44/121] installing zlib-1.2.11-2.47
[    7s] [45/121] installing shadow-utils-4.1.4.2-3.1
[    7s] [46/121] installing build-compare-2015.04.28-2.15
[    7s] [47/121] installing terminfo-base-full-5.9-3.11
[    7s] [48/121] installing coreutils-6.9-3.1
[    8s] [49/121] installing cpp-6.2.1-3.3
[    8s] [50/121] installing dash-0.5.7-2.1
[    9s] [51/121] installing gawk-3.1.5-3.1
[    9s] [52/121] installing gcc-c++-6.2.1-3.3
[   10s] [53/121] installing grep-2.5.2-3.1
[   10s] [54/121] installing libacl-2.2.52-2.49
[   10s] [55/121] installing libasm-0.153-2.14
[   10s] [56/121] installing libblkid-2.30-3.1
[   10s] [57/121] installing libgcrypt-1.7.7-2.1
[   10s] [58/121] installing libglib-2.52.2-3.1
[   10s] [59/121] installing libopenssl-1.0.2k-2.35
[   10s] [60/121] installing libstdc++-6.2.1-3.3
[   10s] [61/121] installing make-4.0-2.6
[   10s] [62/121] installing nss-certs-3.23-2.27
[   11s] [63/121] installing smack-1.3.0-2.43
[   11s] [64/121] installing bzip2-1.0.6-2.42
[   11s] [65/121] installing libgfortran-6.2.1-3.3
[   11s] [66/121] installing libmagic-5.31-3.19
[   11s] [67/121] installing libxml2-2.9.4-2.27
[   11s] [68/121] installing xz-5.2.2-2.38
[   11s] [69/121] installing libdw-0.153-2.14
[   11s] [70/121] installing libstdc++-devel-6.2.1-3.3
[   12s] [71/121] installing file-5.31-3.19
[   12s] [72/121] installing libncurses-5.9-3.11
[   12s] [73/121] installing libncurses6-5.9-3.11
[   12s] [74/121] installing linux-glibc-devel-3.10-2.47
[   12s] [75/121] installing tar-1.17-3.1
[   12s] [76/121] installing db4-4.8.30.NC-2.43
[   12s] [77/121] installing glibc-locale-2.24-3.11
[   13s] [78/121] installing gzip-1.3.12-3.22
[   13s] [79/121] installing libcc1-6.2.1-3.3
[   13s] [80/121] installing libcilkrts-6.2.1-3.3
[   13s] [81/121] installing libfdisk-2.30-3.1
[   13s] [82/121] installing libmount-2.30-3.1
[   13s] [83/121] installing libubsan-6.2.1-3.3
[   13s] [84/121] installing pam-1.1.6-3.1
[   13s] [85/121] installing rsync-3.1.1-2.1
[   13s] [86/121] installing tzdata-2017b-2.1
[   14s] [87/121] installing elfutils-0.153-2.14
[   14s] [88/121] installing libcurl-7.53.1-2.1
[   14s] [89/121] installing libxslt-1.1.29-2.1
[   14s] [90/121] installing glibc-devel-2.24-3.11
[   14s] [91/121] installing less-466-2.1
[   14s] [92/121] installing libreadline-5.2-2.37
[   14s] [93/121] installing procps-ng-3.3.9-3.1
[   14s] [94/121] installing libxslt-tools-1.1.29-2.1
[   14s] [95/121] installing pam-modules-extra-1.1.6-3.1
[   15s] [96/121] installing perl-5.20.0-3.1
[   16s] [97/121] installing gcc-6.2.1-3.3
[   17s] [98/121] installing build-mkbaselibs-20120927-2.1
[   17s] [99/121] installing perl-Error-0.17017-2.1
[   17s] [100/121] installing autoconf-2.69-2.49
[   17s] [101/121] installing libxml2-tools-2.9.4-2.27
[   17s] [102/121] installing openssh-6.6p1-1.1
[   18s] Usage: groupadd [options] GROUP
[   18s] 
[   18s] Options:
[   18s]   -f, --force                   exit successfully if the group already exists,
[   18s]                                 and cancel -g if the GID is already used
[   18s]   -g, --gid GID                 use GID for the new group
[   18s]   -h, --help                    display this help message and exit
[   18s]   -K, --key KEY=VALUE           override /etc/login.defs defaults
[   18s]   -o, --non-unique              allow to create groups with duplicate
[   18s]                                 (non-unique) GID
[   18s]   -p, --password PASSWORD       use this encrypted password for the new group
[   18s]   -r, --system                  create a system account
[   18s] 
[   18s] [103/121] installing python-2.7.8-2.6
[   18s] [104/121] installing util-linux-2.30-3.1
[   19s] [105/121] installing python-xml-2.7.8-2.6
[   19s] [106/121] installing util-linux-su-2.30-3.1
[   19s] [107/121] installing automake-1.14.1-2.38
[   19s] [108/121] installing sgml-skel-0.6-2.1
[   19s] [109/121] installing build-20120927-2.1
[   19s] [110/121] installing git-core-2.0.1-2.2
[   20s] [111/121] installing git-2.0.1-2.2
[   20s] [112/121] installing iso_ent-2000.11.03-2.1
[   20s] [113/121] installing libtool-2.4.2-2.38
[   20s] [114/121] installing xmlcharent-0.3-2.1
[   20s] [115/121] installing docbook_4-4.5-2.1
[   20s] [116/121] installing docbook-xsl-stylesheets-1.78.1-2.1
[   21s] [117/121] installing asciidoc-8.6.6-2.1
[   21s] [118/121] installing nss-3.23-2.27
[   21s] [119/121] installing libsoftokn3-3.23-2.27
[   21s] [120/121] installing rpm-4.11.0.1-3.12
[   21s] [121/121] installing rpm-build-4.11.0.1-3.12
[   22s] removing nis flags from /var/cache/build/root_2/etc/nsswitch.conf...
[   22s] now finalizing build dir...
[   22s] build target is i686-tizen-linux
[   22s] -----------------------------------------------------------------
[   22s] I have the following modifications for dracut.spec:
[   22s] 9c9
[   22s] < Release:        0
[   22s] ---
[   22s] > Release:        2.6
[   22s] 256a257
[   22s] > %changelog
[   22s] -----------------------------------------------------------------
[   22s] ----- building dracut.spec (user abuild)
[   22s] -----------------------------------------------------------------
[   22s] -----------------------------------------------------------------
[   22s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:4.0:Unified/emulator/36ed83edd3d6a07e17a0053f6dfcc4ba-dracut' -ba /home/abuild/rpmbuild/SOURCES/dracut.spec
[   22s] Building target platforms: i686-tizen-linux
[   22s] Building for target i686-tizen-linux
[   22s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.LnzL6y
[   22s] + umask 022
[   22s] + cd /home/abuild/rpmbuild/BUILD
[   22s] + cd /home/abuild/rpmbuild/BUILD
[   22s] + rm -rf dracut-032
[   22s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/dracut-032.tar.xz
[   22s] + /bin/tar -xf -
[   22s] + STATUS=0
[   22s] + '[' 0 -ne 0 ']'
[   22s] + cd dracut-032
[   22s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w .
[   22s] + echo 'Patch #0 (0001-modify-ln-relative-with-cd-ln.patch):'
[   22s] Patch #0 (0001-modify-ln-relative-with-cd-ln.patch):
[   22s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-modify-ln-relative-with-cd-ln.patch
[   22s] + /bin/patch -p1 --fuzz=2
[   22s] patching file Makefile
[   22s] + cp /home/abuild/rpmbuild/SOURCES/dracut.manifest .
[   22s] + exit 0
[   22s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.kuWk56
[   22s] + umask 022
[   22s] + cd /home/abuild/rpmbuild/BUILD
[   22s] + cd dracut-032
[   22s] ++ uname -m
[   22s] + [[ i686 == \a\a\r\c\h\6\4 ]]
[   22s] + LANG=C
[   22s] + export LANG
[   22s] + unset DISPLAY
[   22s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g'
[   22s] + export CFLAGS
[   22s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu++11'
[   22s] + export CXXFLAGS
[   22s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir'
[   22s] + export FFLAGS
[   22s] + LDFLAGS=
[   22s] + export LDFLAGS
[   22s] + LD_AS_NEEDED=1
[   22s] + export LD_AS_NEEDED
[   22s] + make all
[   22s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu99  -D_FILE_OFFSET_BITS=64   -c -o install/dracut-install.o install/dracut-install.c
[   22s] install/dracut-install.c: In function 'resolve_deps':
[   22s] install/dracut-install.c:338:17: warning: ignoring return value of 'read', declared with attribute warn_unused_result [-Wunused-result]
[   22s]                  read(fd, buf, LINE_MAX);
[   22s]                  ^~~~~~~~~~~~~~~~~~~~~~~
[   22s] install/dracut-install.c: In function 'cp':
[   22s] install/dracut-install.c:223:33: warning: ignoring return value of 'fchown', declared with attribute warn_unused_result [-Wunused-result]
[   22s]                                  fchown(dest_desc, (__uid_t)-1, sb.st_gid);
[   22s]                                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[   23s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu99  -D_FILE_OFFSET_BITS=64   -c -o install/hashmap.o install/hashmap.c
[   23s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu99  -D_FILE_OFFSET_BITS=64   -c -o install/log.o install/log.c
[   23s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu99  -D_FILE_OFFSET_BITS=64   -c -o install/util.o install/util.c
[   23s] cc   install/dracut-install.o install/hashmap.o install/log.o install/util.o   -o install/dracut-install
[   23s] ln -fs install/dracut-install dracut-install
[   23s] asciidoc -d manpage -b docbook -o lsinitrd.1.xml lsinitrd.1.asc
[   24s] xsltproc -o lsinitrd.1 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl lsinitrd.1.xml
[   24s] Note: Writing lsinitrd.1
[   24s] asciidoc -d manpage -b docbook -o dracut.conf.5.xml dracut.conf.5.asc
[   24s] xsltproc -o dracut.conf.5 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.conf.5.xml
[   25s] Note: Writing dracut.conf.5
[   25s] asciidoc -d manpage -b docbook -o dracut.cmdline.7.xml dracut.cmdline.7.asc
[   26s] xsltproc -o dracut.cmdline.7 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.cmdline.7.xml
[   26s] Note: Writing dracut.cmdline.7
[   26s] asciidoc -d manpage -b docbook -o dracut.bootup.7.xml dracut.bootup.7.asc
[   27s] xsltproc -o dracut.bootup.7 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.bootup.7.xml
[   27s] Note: Writing dracut.bootup.7
[   27s] asciidoc -d manpage -b docbook -o dracut.8.xml dracut.8.asc
[   28s] xsltproc -o dracut.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.8.xml
[   28s] Note: Writing dracut.8
[   28s] asciidoc -d manpage -b docbook -o dracut-catimages.8.xml dracut-catimages.8.asc
[   28s] xsltproc -o dracut-catimages.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut-catimages.8.xml
[   29s] Note: Writing dracut-catimages.8
[   29s] asciidoc -d manpage -b docbook -o mkinitrd.8.xml mkinitrd.8.asc
[   29s] xsltproc -o mkinitrd.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl mkinitrd.8.xml
[   29s] Note: Writing mkinitrd.8
[   29s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-cmdline.service.8.xml modules.d/98systemd/dracut-cmdline.service.8.asc
[   30s] xsltproc -o modules.d/98systemd/dracut-cmdline.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-cmdline.service.8.xml
[   30s] Note: Writing dracut-cmdline.service.8
[   30s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-initqueue.service.8.xml modules.d/98systemd/dracut-initqueue.service.8.asc
[   30s] xsltproc -o modules.d/98systemd/dracut-initqueue.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-initqueue.service.8.xml
[   30s] Note: Writing dracut-initqueue.service.8
[   30s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-mount.service.8.xml modules.d/98systemd/dracut-mount.service.8.asc
[   31s] xsltproc -o modules.d/98systemd/dracut-mount.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-mount.service.8.xml
[   31s] Note: Writing dracut-mount.service.8
[   31s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-shutdown.service.8.xml modules.d/98systemd/dracut-shutdown.service.8.asc
[   31s] xsltproc -o modules.d/98systemd/dracut-shutdown.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-shutdown.service.8.xml
[   32s] Note: Writing dracut-shutdown.service.8
[   32s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-mount.service.8.xml modules.d/98systemd/dracut-pre-mount.service.8.asc
[   32s] xsltproc -o modules.d/98systemd/dracut-pre-mount.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-mount.service.8.xml
[   32s] Note: Writing dracut-pre-mount.service.8
[   32s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-pivot.service.8.xml modules.d/98systemd/dracut-pre-pivot.service.8.asc
[   33s] xsltproc -o modules.d/98systemd/dracut-pre-pivot.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-pivot.service.8.xml
[   33s] Note: Writing dracut-pre-pivot.service.8
[   33s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-trigger.service.8.xml modules.d/98systemd/dracut-pre-trigger.service.8.asc
[   33s] xsltproc -o modules.d/98systemd/dracut-pre-trigger.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-trigger.service.8.xml
[   33s] Note: Writing dracut-pre-trigger.service.8
[   33s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-udev.service.8.xml modules.d/98systemd/dracut-pre-udev.service.8.asc
[   34s] xsltproc -o modules.d/98systemd/dracut-pre-udev.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-udev.service.8.xml
[   34s] Note: Writing dracut-pre-udev.service.8
[   34s] asciidoc -a numbered -d book -b docbook -o dracut.xml dracut.asc
[   37s] xsltproc -o dracut.html --xinclude -nonet \
[   37s] 	--stringparam html.stylesheet \
[   37s] 	http://docs.fedoraproject.org/en-US/Common_Content/css/default.css \
[   37s] 	http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl dracut.xml
[   38s] rm -f -- dracut.xml
[   38s] rm modules.d/98systemd/dracut-mount.service.8.xml dracut.8.xml dracut.cmdline.7.xml modules.d/98systemd/dracut-pre-mount.service.8.xml dracut.bootup.7.xml modules.d/98systemd/dracut-initqueue.service.8.xml modules.d/98systemd/dracut-pre-pivot.service.8.xml mkinitrd.8.xml modules.d/98systemd/dracut-cmdline.service.8.xml dracut.conf.5.xml lsinitrd.1.xml modules.d/98systemd/dracut-pre-udev.service.8.xml dracut-catimages.8.xml modules.d/98systemd/dracut-pre-trigger.service.8.xml modules.d/98systemd/dracut-shutdown.service.8.xml
[   38s] + exit 0
[   38s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.eYiOtr
[   38s] + umask 022
[   38s] + cd /home/abuild/rpmbuild/BUILD
[   38s] + cd dracut-032
[   38s] + LANG=C
[   38s] + export LANG
[   38s] + unset DISPLAY
[   38s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386
[   38s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386
[   38s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386 libdir=/usr/lib bindir=/usr/bin systemdsystemunitdir=/usr/lib/systemd/system sysconfdir=/etc mandir=/usr/share/man
[   38s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/lib/dracut
[   38s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/bin
[   38s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/etc
[   38s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/lib/dracut/modules.d
[   38s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/share/man/man1 /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/share/man/man5 /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/share/man/man7 /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/share/man/man8
[   38s] install -m 0755 dracut.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/bin/dracut
[   38s] install -m 0755 dracut-catimages.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/bin/dracut-catimages
[   38s] install -m 0755 mkinitrd-dracut.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/bin/mkinitrd
[   38s] install -m 0755 lsinitrd.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/bin/lsinitrd
[   38s] install -m 0644 dracut.conf /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/etc/dracut.conf
[   38s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/etc/dracut.conf.d
[   38s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/lib/dracut/dracut.conf.d
[   38s] install -m 0755 dracut-functions.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/lib/dracut/dracut-functions.sh
[   38s] install -m 0755 dracut-version.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/lib/dracut/dracut-version.sh
[   38s] ln -fs dracut-functions.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/lib/dracut/dracut-functions
[   38s] install -m 0755 dracut-logger.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/lib/dracut/dracut-logger.sh
[   38s] install -m 0755 dracut-initramfs-restore.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/lib/dracut/dracut-initramfs-restore
[   38s] cp -arx modules.d /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/lib/dracut
[   38s] for i in lsinitrd.1; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/share/man/man1/${i##*/}; done
[   38s] for i in dracut.conf.5; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/share/man/man5/${i##*/}; done
[   38s] for i in dracut.cmdline.7 dracut.bootup.7; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/share/man/man7/${i##*/}; done
[   38s] for i in dracut.8 dracut-catimages.8 mkinitrd.8 modules.d/98systemd/dracut-cmdline.service.8 modules.d/98systemd/dracut-initqueue.service.8 modules.d/98systemd/dracut-mount.service.8 modules.d/98systemd/dracut-shutdown.service.8 modules.d/98systemd/dracut-pre-mount.service.8 modules.d/98systemd/dracut-pre-pivot.service.8 modules.d/98systemd/dracut-pre-trigger.service.8 modules.d/98systemd/dracut-pre-udev.service.8; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/share/man/man8/${i##*/}; done
[   38s] ln -fs dracut.cmdline.7 /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/share/man/man7/dracut.kernel.7
[   38s] if [ -n "/usr/lib/systemd/system" ]; then \
[   38s] 	mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/lib/systemd/system; \
[   38s] 	cd /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386 && ln -sf .//usr/lib/dracut/modules.d/98systemd/dracut-shutdown.service .//usr/lib/systemd/system/dracut-shutdown.service && cd - ; \
[   38s] 	mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/lib/systemd/system/shutdown.target.wants; \
[   38s] 	ln -s ../dracut-shutdown.service \
[   38s] 	/home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/lib/systemd/system/shutdown.target.wants/dracut-shutdown.service; \
[   38s] 	mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/lib/systemd/system/initrd.target.wants; \
[   38s] 	for i in \
[   38s] 	    dracut-cmdline.service \
[   38s] 	    dracut-initqueue.service \
[   38s] 	    dracut-mount.service \
[   38s] 	    dracut-pre-mount.service \
[   38s] 	    dracut-pre-pivot.service \
[   38s] 	    dracut-pre-trigger.service \
[   38s] 	    dracut-pre-udev.service \
[   38s] 	    ; do \
[   38s] 		cd /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386 && ln -sf .//usr/lib/dracut/modules.d/98systemd/$i .//usr/lib/systemd/system && cd -; \
[   38s] 		ln -s ../$i \
[   38s] 		/home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/lib/systemd/system/initrd.target.wants/$i; \
[   38s] 	done \
[   38s] fi
[   38s] /home/abuild/rpmbuild/BUILD/dracut-032
[   38s] /home/abuild/rpmbuild/BUILD/dracut-032
[   38s] /home/abuild/rpmbuild/BUILD/dracut-032
[   38s] /home/abuild/rpmbuild/BUILD/dracut-032
[   38s] /home/abuild/rpmbuild/BUILD/dracut-032
[   38s] /home/abuild/rpmbuild/BUILD/dracut-032
[   38s] /home/abuild/rpmbuild/BUILD/dracut-032
[   38s] /home/abuild/rpmbuild/BUILD/dracut-032
[   38s] if [ -f install/dracut-install ]; then \
[   38s] 	install -m 0755 install/dracut-install /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/lib/dracut/dracut-install; \
[   38s] fi
[   38s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/lib/kernel/install.d
[   38s] install -m 0755 50-dracut.install /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/lib/kernel/install.d/50-dracut.install
[   38s] install -m 0755 51-dracut-rescue.install /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/lib/kernel/install.d/51-dracut-rescue.install
[   38s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/share/bash-completion/completions
[   38s] install -m 0644 dracut-bash-completion.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/share/bash-completion/completions/dracut
[   38s] install -m 0644 lsinitrd-bash-completion.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/share/bash-completion/completions/lsinitrd
[   38s] + echo DRACUT_VERSION=032-2.6
[   38s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386//usr/lib/dracut/modules.d/01fips
[   38s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386//usr/lib/dracut/modules.d/02fips-aesni
[   38s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386//usr/lib/dracut/modules.d/50gensplash
[   38s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386//usr/lib/dracut/modules.d/96securityfs
[   38s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386//usr/lib/dracut/modules.d/97masterkey
[   38s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386//usr/lib/dracut/modules.d/98integrity
[   38s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386//usr/lib/dracut/modules.d/98selinux
[   38s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/boot/dracut
[   38s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/var/lib/dracut/overlay
[   38s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/var/log
[   38s] + touch /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/var/log/dracut.log
[   38s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/com/initramfs
[   38s] + install -m 0644 dracut.conf.d/suse.conf.example /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/etc/dracut.conf.d/01-dist.conf
[   38s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/etc/logrotate.d
[   38s] + install -m 0644 dracut.logrotate /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/etc/logrotate.d/dracut_log
[   38s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/dracut-032
[   38s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/lib/dracut/dracut-install
[   38s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory
[   38s] cpio: glibc-2.24/csu/init.c: Cannot stat: No such file or directory
[   38s] cpio: glibc-2.24/sysdeps/i386/crti.S: Cannot stat: No such file or directory
[   38s] cpio: glibc-2.24/sysdeps/i386/crtn.S: Cannot stat: No such file or directory
[   38s] cpio: glibc-2.24/sysdeps/i386/start.S: Cannot stat: No such file or directory
[   38s] 195 blocks
[   38s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/dracut-032/dracut-debuginfo.manifest
[   38s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/dracut-032/dracut-debugsource.manifest
[   38s] + /usr/lib/rpm/check-buildroot
[   38s] + /usr/lib/rpm//brp-compress
[   38s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip
[   39s] + /usr/lib/rpm/brp-python-hardlink
[   39s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386
[   39s] Processing files: dracut-032-2.6.i686
[   39s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv
[   39s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K
[   39s] 
[   39s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.bTXguQ
[   39s] + umask 022
[   39s] + cd /home/abuild/rpmbuild/BUILD
[   39s] + cd dracut-032
[   39s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/share/licenses/dracut
[   39s] + export LICENSEDIR
[   39s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/share/licenses/dracut
[   39s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386/usr/share/licenses/dracut
[   39s] + exit 0
[   40s] Provides: config(dracut) = 032-2.6 dracut = 032-2.6 dracut(x86-32) = 032-2.6
[   40s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
[   40s] Requires: /bin/bash /bin/sh libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.2) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libc.so.6(GLIBC_2.8) libgcc_s.so.1 libgcc_s.so.1(GCC_3.0) libgcc_s.so.1(GCC_3.3.1)
[   40s] Conflicts: systemd < 187
[   40s] Processing files: dracut-debugsource-032-2.6.i686
[   40s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv
[   40s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K
[   40s] 
[   40s] Provides: dracut-debugsource = 032-2.6 dracut-debugsource(x86-32) = 032-2.6
[   40s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1
[   40s] Processing files: dracut-network-032-2.6.i686
[   40s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv
[   40s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K
[   40s] 
[   40s] Provides: dracut-network = 032-2.6 dracut-network(x86-32) = 032-2.6
[   40s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
[   40s] Requires: /bin/bash /bin/sh
[   40s] Processing files: dracut-caps-032-2.6.i686
[   40s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv
[   40s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K
[   40s] 
[   40s] Provides: dracut-caps = 032-2.6 dracut-caps(x86-32) = 032-2.6
[   40s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
[   40s] Requires: /bin/bash
[   40s] Processing files: dracut-tools-032-2.6.i686
[   40s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv
[   40s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K
[   40s] 
[   40s] Provides: dracut-tools = 032-2.6 dracut-tools(x86-32) = 032-2.6
[   40s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
[   40s] Requires: /bin/bash
[   40s] Processing files: dracut-debuginfo-032-2.6.i686
[   40s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv
[   40s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K
[   40s] 
[   40s] Provides: dracut-debuginfo = 032-2.6 dracut-debuginfo(x86-32) = 032-2.6
[   40s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
[   40s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386
[   40s] Wrote: /home/abuild/rpmbuild/SRPMS/dracut-032-2.6.src.rpm
[   41s] XZ: Adjusted the number of threads from 36 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/dracut-032-2.6.i686.rpm
[   41s] XZ: Adjusted the number of threads from 36 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/dracut-debugsource-032-2.6.i686.rpm
[   41s] XZ: Adjusted the number of threads from 36 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/dracut-network-032-2.6.i686.rpm
[   41s] XZ: Adjusted the number of threads from 36 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/dracut-caps-032-2.6.i686.rpm
[   41s] XZ: Adjusted the number of threads from 36 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/dracut-tools-032-2.6.i686.rpm
[   41s] XZ: Adjusted the number of threads from 36 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/dracut-debuginfo-032-2.6.i686.rpm
[   41s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.d3onjG
[   41s] + umask 022
[   41s] + cd /home/abuild/rpmbuild/BUILD
[   41s] + cd dracut-032
[   41s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/dracut-032-2.6.i386
[   41s] + exit 0
[   41s] ... checking for files with abuild user/group
[   41s] ... creating baselibs
[   41s] ... comparing built packages with the former built
[   41s] /usr/lib/build/pkg-diff.sh
[   41s] compare /.build.oldpackages/dracut-032-2.5.src.rpm /home/abuild/rpmbuild/SRPMS/dracut-032-2.6.src.rpm
[   41s] This is not a prerelease project. Compare the project name.
[   41s] comparing rpmtags
[   41s] comparing RELEASE
[   41s] comparing PROVIDES
[   41s] comparing scripts
[   41s] comparing filelist
[   41s] comparing file checksum
[   41s] RPM meta information is identical
[   41s] compare /.build.oldpackages/dracut-032-2.5.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-032-2.6.i686.rpm
[   41s] Comparing dracut-032-2.5.i686.rpm to dracut-032-2.6.i686.rpm
[   42s] This is not a prerelease project. Compare the project name.
[   42s] comparing rpmtags
[   42s] comparing RELEASE
[   42s] comparing PROVIDES
[   42s] comparing scripts
[   42s] comparing filelist
[   42s] comparing file checksum
[   42s] creating rename script
[   42s] RPM file checksum differs.
[   42s] Extracting packages
[   42s] /usr/lib/dracut/dracut-version.sh differs (ASCII text)
[   42s] --- old//usr/lib/dracut/dracut-version.sh	2017-09-22 07:49:12.000000000 +0000
[   42s] +++ new//usr/lib/dracut/dracut-version.sh	2017-09-26 18:12:50.000000000 +0000
[   42s] @@ -1 +1 @@
[   42s] -DRACUT_VERSION=032-2.5
[   42s] +DRACUT_VERSION=032-2.6
[   42s] compare /.build.oldpackages/dracut-caps-032-2.5.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-caps-032-2.6.i686.rpm
[   42s] Comparing dracut-caps-032-2.5.i686.rpm to dracut-caps-032-2.6.i686.rpm
[   42s] This is not a prerelease project. Compare the project name.
[   42s] comparing rpmtags
[   42s] comparing RELEASE
[   42s] comparing PROVIDES
[   42s] comparing scripts
[   42s] comparing filelist
[   42s] comparing file checksum
[   42s] creating rename script
[   42s] RPM meta information is identical
[   42s] compare /.build.oldpackages/dracut-debuginfo-032-2.5.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-debuginfo-032-2.6.i686.rpm
[   43s] skipping -debuginfo package
[   43s] compare /.build.oldpackages/dracut-debugsource-032-2.5.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-debugsource-032-2.6.i686.rpm
[   43s] Comparing dracut-debugsource-032-2.5.i686.rpm to dracut-debugsource-032-2.6.i686.rpm
[   43s] This is not a prerelease project. Compare the project name.
[   43s] comparing rpmtags
[   43s] comparing RELEASE
[   43s] comparing PROVIDES
[   43s] comparing scripts
[   43s] comparing filelist
[   43s] comparing file checksum
[   43s] creating rename script
[   43s] RPM meta information is identical
[   43s] compare /.build.oldpackages/dracut-network-032-2.5.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-network-032-2.6.i686.rpm
[   43s] Comparing dracut-network-032-2.5.i686.rpm to dracut-network-032-2.6.i686.rpm
[   43s] This is not a prerelease project. Compare the project name.
[   43s] comparing rpmtags
[   43s] comparing RELEASE
[   43s] comparing PROVIDES
[   43s] comparing scripts
[   43s] comparing filelist
[   43s] comparing file checksum
[   43s] creating rename script
[   44s] RPM meta information is identical
[   44s] compare /.build.oldpackages/dracut-tools-032-2.5.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-tools-032-2.6.i686.rpm
[   44s] Comparing dracut-tools-032-2.5.i686.rpm to dracut-tools-032-2.6.i686.rpm
[   44s] This is not a prerelease project. Compare the project name.
[   44s] comparing rpmtags
[   44s] comparing RELEASE
[   44s] comparing PROVIDES
[   44s] comparing scripts
[   44s] comparing filelist
[   44s] comparing file checksum
[   44s] creating rename script
[   44s] RPM file checksum differs.
[   44s] Extracting packages
[   44s] Package content is identical
[   44s] 
[   44s] obsnw15 finished "build dracut.spec" at Tue Sep 26 18:12:56 UTC 2017.
[   44s]