[ 0s] Memory limit set to 82442244KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=aarch64 [ 0s] [ 0s] [ 0s] obsnw18 started "build _service:gbs:cryptsetup.spec" at Tue Aug 29 03:10:37 UTC 2017. [ 0s] [ 0s] Building cryptsetup for project 'Tizen:4.0:Unified' repository 'standard' arch 'aarch64' srcmd5 'be88ca840cb723720d546352fc530ace' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:cryptsetup.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:cryptsetup.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:cryptsetup.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] interpreter for 'aarch64' is -1 [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling bash... [ 1s] [6/40] preinstalling diffutils... [ 1s] [7/40] preinstalling grep... [ 1s] [8/40] preinstalling libattr... [ 1s] [9/40] preinstalling libbz2... [ 1s] [10/40] preinstalling libcap... [ 1s] [11/40] preinstalling libelf... [ 1s] [12/40] preinstalling libfreebl3... [ 1s] [13/40] preinstalling libgcc... [ 2s] [14/40] preinstalling liblua... [ 2s] [15/40] preinstalling liblzma... [ 2s] [16/40] preinstalling libncurses... [ 2s] [17/40] preinstalling libpopt... [ 2s] [18/40] preinstalling libsmack... [ 2s] [19/40] preinstalling libsqlite... [ 2s] [20/40] preinstalling libuuid... [ 2s] [21/40] preinstalling nspr... [ 2s] [22/40] preinstalling sed... [ 2s] [23/40] preinstalling zlib... [ 2s] [24/40] preinstalling qemu-accel-x86_64-aarch64... [ 6s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 6s] [26/40] preinstalling coreutils... [ 6s] [27/40] preinstalling libacl... [ 7s] [28/40] preinstalling libblkid... [ 7s] [29/40] preinstalling libreadline... [ 7s] [30/40] preinstalling smack... [ 7s] [31/40] preinstalling bzip2... [ 7s] [32/40] preinstalling libmagic... [ 7s] [33/40] preinstalling libxml2... [ 7s] [34/40] preinstalling tar... [ 7s] [35/40] preinstalling libmount... [ 7s] [36/40] preinstalling util-linux... [ 7s] [37/40] preinstalling util-linux-su... [ 7s] [38/40] preinstalling nss... [ 7s] [39/40] preinstalling libsoftokn3... [ 7s] [40/40] preinstalling rpm... [ 7s] [ 7s] running qemu-linux-user-x86_64-cross postinstall script [ 7s] running qemu-accel-x86_64-aarch64 postinstall script [ 7s] ln: creating symbolic link `/usr/lib64/gcc/aarch64-tizen-linux-gnu/6.2.1/liblto_plugin.so': No such file or directory [ 7s] running setup postinstall script [ 7s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 7s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 7s] initializing rpm db... [ 8s] reordering...cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 8s] [1/104] installing libmagic-data-5.31-2.16 [ 8s] [2/104] installing setup-0.9-2.1 [ 8s] [3/104] installing filesystem-3.1-2.1 [ 8s] [4/104] installing glibc-2.24-2.10 [ 9s] [5/104] installing bash-3.2.57-2.1 [ 9s] [6/104] installing binutils-2.27-2.14 [ 9s] [7/104] installing cpio-2.11-2.1 [ 9s] [8/104] installing diffutils-3.3-2.1 [ 9s] [9/104] installing findutils-4.3.8-2.27 [ 9s] [10/104] installing hostname-3.12-2.1 [ 9s] [11/104] installing libatomic-6.2.1-2.2 [ 9s] [12/104] installing libattr-2.4.47-1.1 [ 10s] [13/104] installing libbz2-1.0.6-2.23 [ 10s] [14/104] installing libcap-2.24-2.29 [ 10s] [15/104] installing libdevmapper-1.02.77-2.1 [ 10s] [16/104] installing libelf-0.153-2.6 [ 10s] [17/104] installing libext2fs-1.43.4-2.1 [ 10s] [18/104] installing libfreebl3-3.23-2.16 [ 10s] [19/104] installing libgcc-6.2.1-2.2 [ 10s] [20/104] installing libgomp-6.2.1-2.2 [ 10s] [21/104] installing libgpg-error-1.13-2.5 [ 10s] [22/104] installing libitm-6.2.1-2.2 [ 11s] [23/104] installing libltdl-2.4.2-2.20 [ 11s] [24/104] installing liblua-5.1.4-2.3 [ 11s] [25/104] installing liblzma-5.2.2-2.19 [ 11s] [26/104] installing libpcre-8.39-2.1 [ 11s] [27/104] installing libpopt-1.16-2.3 [ 11s] [28/104] installing libsmack-1.3.0-2.24 [ 11s] [29/104] installing libsmartcols-2.30-2.1 [ 11s] [30/104] installing libsqlite-3.18.0-2.3 [ 11s] [31/104] installing libuuid-2.30-2.1 [ 11s] [32/104] installing m4-1.4.17-2.1 [ 11s] [33/104] installing net-tools-2.0_20121208git-2.1 [ 12s] [34/104] installing nspr-4.12-2.3 [ 12s] [35/104] installing patch-2.7-2.3 [ 12s] [36/104] installing pkg-config-0.28-2.24 [ 12s] [37/104] installing sed-4.1c-2.1 [ 12s] [38/104] installing update-alternatives-1.18.15-2.1 [ 12s] [39/104] installing which-2.20-2.1 [ 12s] [40/104] installing zlib-1.2.11-2.26 [ 12s] [41/104] installing build-compare-2015.04.28-2.6 [ 12s] [42/104] installing qemu-linux-user-x86_64-cross-2.7.0-1.4.1 [ 13s] [43/104] installing terminfo-base-full-5.9-2.16 [ 13s] [44/104] installing coreutils-6.9-2.1 [ 13s] [45/104] installing cpp-6.2.1-2.2 [ 14s] [46/104] installing device-mapper-1.02.77-2.1 [ 14s] [47/104] installing gawk-3.1.5-2.1 [ 14s] [48/104] installing gcc-c++-6.2.1-2.2 [ 15s] [49/104] installing grep-2.5.2-2.1 [ 15s] [50/104] installing libacl-2.2.52-2.28 [ 15s] [51/104] installing libasm-0.153-2.6 [ 15s] [52/104] installing libblkid-2.30-2.1 [ 15s] [53/104] installing libgcrypt-1.7.7-2.1 [ 15s] [54/104] installing libgfortran-6.2.1-2.2 [ 15s] [55/104] installing libstdc++-6.2.1-2.2 [ 15s] [56/104] installing libuuid-devel-2.30-2.1 [ 15s] [57/104] installing make-4.0-2.3 [ 15s] [58/104] installing nss-certs-3.23-2.16 [ 16s] [59/104] installing popt-devel-1.16-2.3 [ 16s] [60/104] installing smack-1.3.0-2.24 [ 16s] [61/104] installing bzip2-1.0.6-2.23 [ 16s] [62/104] installing libmagic-5.31-2.16 [ 16s] [63/104] installing libxml2-2.9.4-2.17 [ 16s] [64/104] installing xz-5.2.2-2.19 [ 16s] [65/104] installing libdw-0.153-2.6 [ 16s] [66/104] installing libstdc++-devel-6.2.1-2.2 [ 16s] [67/104] installing file-5.31-2.16 [ 16s] [68/104] installing libncurses-5.9-2.16 [ 17s] [69/104] installing libncurses6-5.9-2.16 [ 17s] [70/104] installing linux-glibc-devel-3.10-2.28 [ 17s] [71/104] installing tar-1.17-2.1 [ 17s] [72/104] installing db4-4.8.30.NC-2.24 [ 17s] [73/104] installing device-mapper-devel-1.02.77-2.1 [ 17s] [74/104] installing gettext-runtime-0.19.7-2.5 [ 17s] [75/104] installing glibc-locale-2.24-2.10 [ 18s] [76/104] installing gzip-1.3.12-2.29 [ 18s] [77/104] installing libcc1-6.2.1-2.2 [ 18s] [78/104] installing libfdisk-2.30-2.1 [ 18s] [79/104] installing libmount-2.30-2.1 [ 18s] [80/104] installing libubsan-6.2.1-2.2 [ 18s] [81/104] installing pam-1.1.6-2.1 [ 18s] [82/104] installing tzdata-2017b-2.1 [ 19s] [83/104] installing elfutils-0.153-2.6 [ 19s] [84/104] installing glibc-devel-2.24-2.10 [ 19s] [85/104] installing less-466-2.1 [ 19s] [86/104] installing libreadline-5.2-2.23 [ 19s] [87/104] installing procps-ng-3.3.9-2.1 [ 19s] [88/104] installing gettext-tools-0.19.7-2.5 [ 19s] [89/104] installing perl-5.20.0-2.5 [ 21s] [90/104] installing gcc-6.2.1-2.2 [ 21s] [91/104] installing build-mkbaselibs-20120927-2.1 [ 22s] [92/104] installing qemu-accel-x86_64-aarch64-0.4-2.1 [ 26s] [93/104] installing autoconf-2.69-2.28 [ 26s] [94/104] installing libgpg-error-devel-1.13-2.5 [ 26s] [95/104] installing util-linux-2.30-2.1 [ 26s] [96/104] installing util-linux-su-2.30-2.1 [ 26s] [97/104] installing automake-1.14.1-2.19 [ 26s] [98/104] installing build-20120927-2.1 [ 26s] [99/104] installing libgcrypt-devel-1.7.7-2.1 [ 26s] [100/104] installing libtool-2.4.2-2.20 [ 26s] [101/104] installing nss-3.23-2.16 [ 27s] [102/104] installing libsoftokn3-3.23-2.16 [ 27s] [103/104] installing rpm-4.11.0.1-2.13 [ 27s] [104/104] installing rpm-build-4.11.0.1-2.13 [ 27s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 27s] now finalizing build dir... [ 28s] build target is aarch64-tizen-linux [ 28s] ----------------------------------------------------------------- [ 28s] I have the following modifications for cryptsetup.spec: [ 28s] 5c5 [ 28s] < Release: 1 [ 28s] --- [ 28s] > Release: 2.1 [ 28s] 23c23 [ 28s] < BuildRequires: gettext [ 28s] --- [ 28s] > BuildRequires: gettext-tools [ 28s] ----------------------------------------------------------------- [ 28s] ----- building cryptsetup.spec (user abuild) [ 28s] ----------------------------------------------------------------- [ 28s] ----------------------------------------------------------------- [ 28s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:4.0:Unified/standard/be88ca840cb723720d546352fc530ace-cryptsetup' -ba /home/abuild/rpmbuild/SOURCES/cryptsetup.spec [ 28s] Building target platforms: aarch64-tizen-linux [ 28s] Building for target aarch64-tizen-linux [ 28s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.5847Os [ 28s] + umask 022 [ 28s] + cd /home/abuild/rpmbuild/BUILD [ 28s] + cd /home/abuild/rpmbuild/BUILD [ 28s] + rm -rf cryptsetup-1.6.7 [ 28s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/cryptsetup-1.6.7.tar.xz [ 28s] + /bin/tar -xf - [ 28s] + STATUS=0 [ 28s] + '[' 0 -ne 0 ']' [ 28s] + cd cryptsetup-1.6.7 [ 28s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 28s] + echo 'Patch #0 (4c6390a-to-064b272.diff):' [ 28s] Patch #0 (4c6390a-to-064b272.diff): [ 28s] + /bin/cat /home/abuild/rpmbuild/SOURCES/4c6390a-to-064b272.diff [ 28s] + /bin/patch -p1 --fuzz=2 [ 28s] patching file autogen.sh [ 28s] + echo 'Patch #1 (0002-Enable-ASLR-feature.patch):' [ 28s] Patch #1 (0002-Enable-ASLR-feature.patch): [ 28s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0002-Enable-ASLR-feature.patch [ 28s] + /bin/patch -p1 --fuzz=2 [ 28s] patching file src/Makefile.am [ 28s] patching file src/Makefile.in [ 28s] + exit 0 [ 28s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.QqGEJ3 [ 28s] + umask 022 [ 28s] + cd /home/abuild/rpmbuild/BUILD [ 28s] + cd cryptsetup-1.6.7 [ 28s] ++ uname -m [ 28s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 28s] + ref=/usr/lib/rpm [ 28s] + for s in guess sub [ 28s] ++ find -maxdepth 8 -name config.guess [ 28s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 28s] + grep -q config-patches@ ./config.guess [ 28s] + grep -q aarch64 ./config.guess [ 28s] + grep -q ppc64le ./config.guess [ 28s] + for s in guess sub [ 28s] ++ find -maxdepth 8 -name config.sub [ 28s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 28s] + grep -q config-patches@ ./config.sub [ 28s] + grep -q aarch64 ./config.sub [ 28s] + grep -q ppc64le ./config.sub [ 28s] + LANG=C [ 28s] + export LANG [ 28s] + unset DISPLAY [ 28s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 28s] + export CFLAGS [ 28s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11' [ 28s] + export CXXFLAGS [ 28s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 28s] + export FFLAGS [ 28s] + LDFLAGS= [ 28s] + export LDFLAGS [ 28s] + LD_AS_NEEDED=1 [ 28s] + export LD_AS_NEEDED [ 28s] + chmod +x ./autogen.sh [ 28s] + ./autogen.sh --prefix=/usr -localedir=/usr/share/locale -libdir=/usr/lib64 [ 30s] [ 30s] Generate build-system by: [ 30s] autopoint: /bin/autopoint (GNU gettext-tools) 0.19.7 [ 31s] aclocal: aclocal (GNU automake) 1.14.1 [ 31s] autoconf: autoconf (GNU Autoconf) 2.69 [ 32s] automake: automake (GNU automake) 1.14.1 [ 32s] libtoolize: libtoolize (GNU libtool) 2.4.2 [ 32s] [ 37s] Copying file m4/codeset.m4 [ 37s] Copying file m4/glibc2.m4 [ 37s] Copying file m4/glibc21.m4 [ 37s] Copying file m4/intdiv0.m4 [ 37s] Copying file m4/intmax.m4 [ 37s] Copying file m4/inttypes-h.m4 [ 38s] Copying file m4/inttypes-pri.m4 [ 38s] Copying file m4/inttypes_h.m4 [ 38s] Copying file m4/lcmessage.m4 [ 38s] Copying file m4/lock.m4 [ 38s] Copying file m4/longdouble.m4 [ 38s] Copying file m4/longlong.m4 [ 38s] Copying file m4/printf-posix.m4 [ 38s] Copying file m4/signed.m4 [ 38s] Copying file m4/size_max.m4 [ 38s] Copying file m4/stdint_h.m4 [ 38s] Copying file m4/uintmax_t.m4 [ 38s] Copying file m4/ulonglong.m4 [ 38s] Copying file m4/visibility.m4 [ 38s] Copying file m4/wchar_t.m4 [ 38s] Copying file m4/wint_t.m4 [ 38s] Copying file m4/xsize.m4 [ 38s] Copying file po/Makevars.template [ 39s] libtoolize: putting auxiliary files in `.'. [ 39s] libtoolize: copying file `./ltmain.sh' [ 39s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 39s] libtoolize: copying file `m4/libtool.m4' [ 39s] libtoolize: copying file `m4/ltoptions.m4' [ 39s] libtoolize: copying file `m4/ltsugar.m4' [ 39s] libtoolize: copying file `m4/ltversion.m4' [ 39s] libtoolize: copying file `m4/lt~obsolete.m4' [ 55s] configure.ac:67: warning: The 'AM_PROG_MKDIR_P' macro is deprecated, and its use is discouraged. [ 55s] configure.ac:67: You should use the Autoconf-provided 'AC_PROG_MKDIR_P' macro instead, [ 55s] configure.ac:67: and use '$(MKDIR_P)' instead of '$(mkdir_p)'in your Makefile.am files. [ 58s] src/Makefile.am:12: warning: source file '$(top_builddir)/lib/utils_crypt.c' is in a subdirectory, [ 58s] src/Makefile.am:12: but option 'subdir-objects' is disabled [ 58s] automake: warning: possible forward-incompatibility. [ 58s] automake: At least a source file is in a subdirectory, but the 'subdir-objects' [ 58s] automake: automake option hasn't been enabled. For now, the corresponding output [ 58s] automake: object file(s) will be placed in the top-level directory. However, [ 58s] automake: this behaviour will change in future Automake versions: they will [ 58s] automake: unconditionally cause object files to be placed in the same subdirectory [ 58s] automake: of the corresponding sources. [ 58s] automake: You are advised to start using 'subdir-objects' option throughout your [ 58s] automake: project, to avoid future incompatibilities. [ 58s] src/Makefile.am:12: warning: source file '$(top_builddir)/lib/utils_loop.c' is in a subdirectory, [ 58s] src/Makefile.am:12: but option 'subdir-objects' is disabled [ 58s] src/Makefile.am:12: warning: source file '$(top_builddir)/lib/utils_fips.c' is in a subdirectory, [ 58s] src/Makefile.am:12: but option 'subdir-objects' is disabled [ 58s] src/Makefile.am:76: warning: source file '$(top_builddir)/lib/utils_crypt.c' is in a subdirectory, [ 58s] src/Makefile.am:76: but option 'subdir-objects' is disabled [ 58s] src/Makefile.am:46: warning: source file '$(top_builddir)/lib/utils_crypt.c' is in a subdirectory, [ 58s] src/Makefile.am:46: but option 'subdir-objects' is disabled [ 58s] src/Makefile.am:46: warning: source file '$(top_builddir)/lib/utils_loop.c' is in a subdirectory, [ 58s] src/Makefile.am:46: but option 'subdir-objects' is disabled [ 59s] tests/Makefile.am:44: warning: source file '$(top_srcdir)/lib/utils_loop.c' is in a subdirectory, [ 59s] tests/Makefile.am:44: but option 'subdir-objects' is disabled [ 63s] Running ./configure --prefix=/usr -localedir=/usr/share/locale -libdir=/usr/lib64 ... [ 63s] checking whether make supports nested variables... yes [ 63s] checking for a BSD-compatible install... /bin/install -c [ 64s] checking whether build environment is sane... yes [ 64s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 64s] checking for gawk... gawk [ 64s] checking whether make sets $(MAKE)... yes [ 64s] checking build system type... aarch64-unknown-linux-gnu [ 64s] checking host system type... aarch64-unknown-linux-gnu [ 64s] checking for style of include used by make... GNU [ 64s] checking for gcc... gcc [ 64s] checking whether the C compiler works... yes [ 64s] checking for C compiler default output file name... a.out [ 64s] checking for suffix of executables... [ 64s] checking whether we are cross compiling... no [ 64s] checking for suffix of object files... o [ 64s] checking whether we are using the GNU C compiler... yes [ 64s] checking whether gcc accepts -g... yes [ 64s] checking for gcc option to accept ISO C89... none needed [ 64s] checking whether gcc understands -c and -o together... yes [ 64s] checking dependency style of gcc... gcc3 [ 64s] checking how to run the C preprocessor... gcc -E [ 64s] checking for grep that handles long lines and -e... /bin/grep [ 64s] checking for egrep... /bin/grep -E [ 65s] checking for ANSI C header files... yes [ 65s] checking for sys/types.h... yes [ 65s] checking for sys/stat.h... yes [ 65s] checking for stdlib.h... yes [ 65s] checking for string.h... yes [ 65s] checking for memory.h... yes [ 65s] checking for strings.h... yes [ 65s] checking for inttypes.h... yes [ 65s] checking for stdint.h... yes [ 65s] checking for unistd.h... yes [ 65s] checking minix/config.h usability... no [ 65s] checking minix/config.h presence... no [ 65s] checking for minix/config.h... no [ 65s] checking whether it is safe to define __EXTENSIONS__... yes [ 65s] checking for gcc... (cached) gcc [ 65s] checking whether we are using the GNU C compiler... (cached) yes [ 65s] checking whether gcc accepts -g... (cached) yes [ 65s] checking for gcc option to accept ISO C89... (cached) none needed [ 65s] checking whether gcc understands -c and -o together... (cached) yes [ 65s] checking dependency style of gcc... (cached) gcc3 [ 65s] checking how to run the C preprocessor... gcc -E [ 65s] checking whether make sets $(MAKE)... (cached) yes [ 65s] checking how to print strings... printf [ 65s] checking for a sed that does not truncate output... /bin/sed [ 65s] checking for fgrep... /bin/grep -F [ 65s] checking for ld used by gcc... /usr/aarch64-tizen-linux-gnu/bin/ld [ 65s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 65s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 65s] checking the name lister (/bin/nm -B) interface... BSD nm [ 65s] checking whether ln -s works... yes [ 65s] checking the maximum length of command line arguments... 1572864 [ 65s] checking whether the shell understands some XSI constructs... yes [ 65s] checking whether the shell understands "+="... yes [ 65s] checking how to convert aarch64-unknown-linux-gnu file names to aarch64-unknown-linux-gnu format... func_convert_file_noop [ 65s] checking how to convert aarch64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop [ 65s] checking for /usr/aarch64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 65s] checking for objdump... objdump [ 65s] checking how to recognize dependent libraries... pass_all [ 65s] checking for dlltool... no [ 65s] checking how to associate runtime and link libraries... printf %s\n [ 65s] checking for ar... ar [ 65s] checking for archiver @FILE support... @ [ 65s] checking for strip... strip [ 65s] checking for ranlib... ranlib [ 66s] checking command to parse /bin/nm -B output from gcc object... ok [ 66s] checking for sysroot... no [ 66s] checking for mt... no [ 66s] checking if : is a manifest tool... no [ 66s] checking for dlfcn.h... yes [ 66s] checking for objdir... .libs [ 66s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 66s] checking for gcc option to produce PIC... -fPIC -DPIC [ 66s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 66s] checking if gcc static flag -static works... no [ 66s] checking if gcc supports -c -o file.o... yes [ 66s] checking if gcc supports -c -o file.o... (cached) yes [ 66s] checking whether the gcc linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 66s] checking whether -lc should be explicitly linked in... no [ 66s] checking dynamic linker characteristics... GNU/Linux ld.so [ 66s] checking how to hardcode library paths into programs... immediate [ 66s] checking whether stripping libraries is possible... yes [ 66s] checking if libtool supports shared libraries... yes [ 66s] checking whether to build shared libraries... yes [ 66s] checking whether to build static libraries... no [ 66s] checking for pkg-config... /bin/pkg-config [ 66s] checking pkg-config is at least version 0.9.0... yes [ 66s] checking for dirent.h that defines DIR... yes [ 66s] checking for library containing opendir... none required [ 66s] checking for ANSI C header files... (cached) yes [ 66s] checking fcntl.h usability... yes [ 66s] checking fcntl.h presence... yes [ 66s] checking for fcntl.h... yes [ 66s] checking malloc.h usability... yes [ 66s] checking malloc.h presence... yes [ 66s] checking for malloc.h... yes [ 66s] checking for inttypes.h... (cached) yes [ 67s] checking sys/ioctl.h usability... yes [ 67s] checking sys/ioctl.h presence... yes [ 67s] checking for sys/ioctl.h... yes [ 67s] checking sys/mman.h usability... yes [ 67s] checking sys/mman.h presence... yes [ 67s] checking for sys/mman.h... yes [ 67s] checking ctype.h usability... yes [ 67s] checking ctype.h presence... yes [ 67s] checking for ctype.h... yes [ 67s] checking for unistd.h... (cached) yes [ 67s] checking locale.h usability... yes [ 67s] checking locale.h presence... yes [ 67s] checking for locale.h... yes [ 67s] checking byteswap.h usability... yes [ 67s] checking byteswap.h presence... yes [ 67s] checking for byteswap.h... yes [ 67s] checking endian.h usability... yes [ 67s] checking endian.h presence... yes [ 67s] checking for endian.h... yes [ 67s] checking uuid/uuid.h usability... yes [ 67s] checking uuid/uuid.h presence... yes [ 67s] checking for uuid/uuid.h... yes [ 67s] checking libdevmapper.h usability... yes [ 67s] checking libdevmapper.h presence... yes [ 67s] checking for libdevmapper.h... yes [ 67s] checking for uuid_clear in -luuid... yes [ 67s] checking for library containing clock_gettime... none required [ 67s] checking for posix_memalign... yes [ 67s] checking for clock_gettime... yes [ 67s] checking for an ANSI C-conforming const... yes [ 68s] checking whether byte ordering is bigendian... no [ 68s] checking for off_t... yes [ 68s] checking for special C compiler options needed for large files... no [ 68s] checking for _FILE_OFFSET_BITS value needed for large files... no [ 68s] checking for _LARGEFILE_SOURCE value needed for large files... no [ 68s] checking whether gcc needs -traditional... no [ 68s] checking whether strerror_r is declared... yes [ 68s] checking for strerror_r... yes [ 68s] checking whether strerror_r returns char *... yes [ 68s] checking whether NLS is requested... yes [ 68s] checking for msgfmt... /bin/msgfmt [ 68s] checking for gmsgfmt... /bin/msgfmt [ 68s] checking for xgettext... /bin/xgettext [ 68s] checking for msgmerge... /bin/msgmerge [ 68s] checking for ld used by GCC... /usr/aarch64-tizen-linux-gnu/bin/ld [ 68s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 68s] checking for shared library run path origin... done [ 68s] checking for CFPreferencesCopyAppValue... no [ 68s] checking for CFLocaleCopyCurrent... no [ 68s] checking for GNU gettext in libc... yes [ 68s] checking whether to use NLS... yes [ 68s] checking where the gettext function comes from... libc [ 68s] checking for poptConfigFileToString in -lpopt... yes [ 69s] checking for DEVMAPPER... yes [ 69s] checking whether dm_task_secure_data is declared... yes [ 69s] checking whether dm_task_retry_remove is declared... yes [ 69s] checking whether DM_UDEV_DISABLE_DISK_RULES_FLAG is declared... yes [ 69s] checking linux/if_alg.h usability... yes [ 69s] checking linux/if_alg.h presence... yes [ 69s] checking for linux/if_alg.h... yes [ 69s] checking for libgcrypt-config... /bin/libgcrypt-config [ 69s] checking for LIBGCRYPT - version >= 1.6.1... yes (1.7.7) [ 69s] configure: WARNING: [ 69s] *** [ 69s] *** The config script /bin/libgcrypt-config was [ 69s] *** built for aarch64-tizen-linux-gnu and thus may not match the [ 69s] *** used host aarch64-unknown-linux-gnu. [ 69s] *** You may want to use the configure option --with-libgcrypt-prefix [ 69s] *** to specify a matching config script or use $SYSROOT. [ 69s] *** [ 69s] checking for libgcrypt-config... (cached) /bin/libgcrypt-config [ 69s] checking for LIBGCRYPT - version >= 1.1.42... yes (1.7.7) [ 69s] configure: WARNING: [ 69s] *** [ 69s] *** The config script /bin/libgcrypt-config was [ 69s] *** built for aarch64-tizen-linux-gnu and thus may not match the [ 69s] *** used host aarch64-unknown-linux-gnu. [ 69s] *** You may want to use the configure option --with-libgcrypt-prefix [ 69s] *** to specify a matching config script or use $SYSROOT. [ 69s] *** [ 69s] checking if internal cryptsetup PBKDF2 is compiled-in... no [ 69s] checking that generated files are newer than configure... done [ 69s] configure: creating ./config.status [ 70s] config.status: creating Makefile [ 70s] config.status: creating lib/Makefile [ 70s] config.status: creating lib/libcryptsetup.pc [ 70s] config.status: creating lib/crypto_backend/Makefile [ 70s] config.status: creating lib/luks1/Makefile [ 70s] config.status: creating lib/loopaes/Makefile [ 70s] config.status: creating lib/verity/Makefile [ 70s] config.status: creating lib/tcrypt/Makefile [ 70s] config.status: creating src/Makefile [ 71s] config.status: creating po/Makefile.in [ 71s] config.status: creating man/Makefile [ 71s] config.status: creating tests/Makefile [ 71s] config.status: creating python/Makefile [ 71s] config.status: creating config.h [ 71s] config.status: executing depfiles commands [ 73s] config.status: executing libtool commands [ 73s] config.status: executing po-directories commands [ 73s] config.status: creating po/POTFILES [ 73s] config.status: creating po/Makefile [ 73s] Now type `make' to compile cryptsetup [ 73s] + make -j4 [ 73s] (CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/missing autoheader) [ 75s] rm -f stamp-h1 [ 75s] touch config.h.in [ 75s] cd . && /bin/sh ./config.status config.h [ 76s] config.status: creating config.h [ 76s] config.status: config.h is unchanged [ 76s] make all-recursive [ 76s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 76s] Making all in lib [ 76s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 76s] Making all in crypto_backend [ 76s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/crypto_backend' [ 76s] CC libcrypto_backend_la-crypto_cipher_kernel.lo [ 76s] CC libcrypto_backend_la-crypto_storage.lo [ 76s] CC libcrypto_backend_la-crc32.lo [ 76s] CC libcrypto_backend_la-pbkdf_check.lo [ 76s] CC libcrypto_backend_la-crypto_gcrypt.lo [ 76s] CCLD libcrypto_backend.la [ 76s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/crypto_backend' [ 76s] Making all in luks1 [ 76s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/luks1' [ 76s] CC libluks1_la-af.lo [ 76s] CC libluks1_la-keymanage.lo [ 76s] CC libluks1_la-keyencryption.lo [ 76s] CCLD libluks1.la [ 77s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/luks1' [ 77s] Making all in loopaes [ 77s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/loopaes' [ 77s] CC libloopaes_la-loopaes.lo [ 77s] CCLD libloopaes.la [ 77s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/loopaes' [ 77s] Making all in verity [ 77s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/verity' [ 77s] CC libverity_la-verity_hash.lo [ 77s] CC libverity_la-verity.lo [ 77s] CCLD libverity.la [ 77s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/verity' [ 77s] Making all in tcrypt [ 77s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/tcrypt' [ 77s] CC libtcrypt_la-tcrypt.lo [ 78s] CCLD libtcrypt.la [ 78s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/tcrypt' [ 78s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 78s] CC libcryptsetup_la-setup.lo [ 78s] CC libcryptsetup_la-utils_benchmark.lo [ 78s] CC libcryptsetup_la-utils.lo [ 78s] CC libcryptsetup_la-utils_crypt.lo [ 78s] CC libcryptsetup_la-utils_loop.lo [ 78s] CC libcryptsetup_la-utils_devpath.lo [ 78s] CC libcryptsetup_la-utils_wipe.lo [ 78s] CC libcryptsetup_la-utils_fips.lo [ 78s] CC libcryptsetup_la-utils_device.lo [ 78s] CC libcryptsetup_la-libdevmapper.lo [ 79s] CC libcryptsetup_la-volumekey.lo [ 79s] CC libcryptsetup_la-random.lo [ 79s] CC libcryptsetup_la-crypt_plain.lo [ 79s] CCLD libcryptsetup.la [ 79s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 79s] Making all in src [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/src' [ 79s] CC cryptsetup-utils_crypt.o [ 79s] CC cryptsetup-utils_loop.o [ 79s] CC cryptsetup-utils_fips.o [ 79s] CC cryptsetup-utils_tools.o [ 79s] CC cryptsetup-utils_password.o [ 79s] CC cryptsetup-cryptsetup.o [ 79s] CC veritysetup-utils_crypt.o [ 79s] CC veritysetup-utils_loop.o [ 79s] CC veritysetup-utils_tools.o [ 79s] CC veritysetup-veritysetup.o [ 80s] CCLD veritysetup [ 80s] CCLD cryptsetup [ 80s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/src' [ 80s] Making all in man [ 80s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/man' [ 80s] make[2]: Nothing to be done for 'all'. [ 80s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/man' [ 80s] Making all in python [ 80s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/python' [ 80s] make[2]: Nothing to be done for 'all'. [ 80s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/python' [ 80s] Making all in tests [ 80s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/tests' [ 80s] make[2]: Nothing to be done for 'all'. [ 80s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/tests' [ 80s] Making all in po [ 80s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/po' [ 80s] make[2]: Nothing to be done for 'all'. [ 80s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/po' [ 80s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 80s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 80s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 80s] + exit 0 [ 80s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.z3bUri [ 80s] + umask 022 [ 80s] + cd /home/abuild/rpmbuild/BUILD [ 80s] + cd cryptsetup-1.6.7 [ 80s] + LANG=C [ 80s] + export LANG [ 80s] + unset DISPLAY [ 80s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64 [ 80s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64 [ 80s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64 [ 80s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64 install [ 80s] Making install in lib [ 80s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 80s] Making install in crypto_backend [ 80s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/crypto_backend' [ 80s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/crypto_backend' [ 80s] make[3]: Nothing to be done for 'install-exec-am'. [ 80s] make[3]: Nothing to be done for 'install-data-am'. [ 80s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/crypto_backend' [ 80s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/crypto_backend' [ 80s] Making install in luks1 [ 80s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/luks1' [ 80s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/luks1' [ 80s] make[3]: Nothing to be done for 'install-exec-am'. [ 80s] make[3]: Nothing to be done for 'install-data-am'. [ 80s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/luks1' [ 80s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/luks1' [ 80s] Making install in loopaes [ 80s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/loopaes' [ 80s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/loopaes' [ 80s] make[3]: Nothing to be done for 'install-exec-am'. [ 80s] make[3]: Nothing to be done for 'install-data-am'. [ 80s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/loopaes' [ 80s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/loopaes' [ 80s] Making install in verity [ 80s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/verity' [ 80s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/verity' [ 80s] make[3]: Nothing to be done for 'install-exec-am'. [ 80s] make[3]: Nothing to be done for 'install-data-am'. [ 80s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/verity' [ 80s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/verity' [ 80s] Making install in tcrypt [ 80s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/tcrypt' [ 80s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/tcrypt' [ 80s] make[3]: Nothing to be done for 'install-exec-am'. [ 80s] make[3]: Nothing to be done for 'install-data-am'. [ 80s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/tcrypt' [ 80s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/tcrypt' [ 80s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 80s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 80s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/lib64' [ 80s] /bin/sh ../libtool --mode=install /bin/install -c libcryptsetup.la '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/lib64' [ 80s] libtool: install: /bin/install -c .libs/libcryptsetup.so.4.7.0 /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/lib64/libcryptsetup.so.4.7.0 [ 80s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/lib64 && { ln -s -f libcryptsetup.so.4.7.0 libcryptsetup.so.4 || { rm -f libcryptsetup.so.4 && ln -s libcryptsetup.so.4.7.0 libcryptsetup.so.4; }; }) [ 80s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/lib64 && { ln -s -f libcryptsetup.so.4.7.0 libcryptsetup.so || { rm -f libcryptsetup.so && ln -s libcryptsetup.so.4.7.0 libcryptsetup.so; }; }) [ 80s] libtool: install: /bin/install -c .libs/libcryptsetup.lai /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/lib64/libcryptsetup.la [ 80s] libtool: install: warning: remember to run `libtool --finish /usr/lib64' [ 80s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/include' [ 80s] /bin/install -c -m 644 libcryptsetup.h '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/include' [ 80s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/lib64/pkgconfig' [ 80s] /bin/install -c -m 644 libcryptsetup.pc '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/lib64/pkgconfig' [ 80s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 80s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 80s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 80s] Making install in src [ 80s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/src' [ 80s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/src' [ 80s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/sbin' [ 80s] /bin/sh ../libtool --mode=install /bin/install -c cryptsetup veritysetup '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/sbin' [ 80s] libtool: install: warning: `../lib/libcryptsetup.la' has not been installed in `/usr/lib64' [ 80s] libtool: install: /bin/install -c .libs/cryptsetup /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/sbin/cryptsetup [ 80s] libtool: install: warning: `../lib/libcryptsetup.la' has not been installed in `/usr/lib64' [ 81s] libtool: install: /bin/install -c .libs/veritysetup /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/sbin/veritysetup [ 81s] make[2]: Nothing to be done for 'install-data-am'. [ 81s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/src' [ 81s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/src' [ 81s] Making install in man [ 81s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/man' [ 81s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/man' [ 81s] make[2]: Nothing to be done for 'install-exec-am'. [ 81s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/share/man/man8' [ 81s] /bin/install -c -m 644 cryptsetup.8 veritysetup.8 '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/share/man/man8' [ 81s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/man' [ 81s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/man' [ 81s] Making install in python [ 81s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/python' [ 81s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/python' [ 81s] make[2]: Nothing to be done for 'install-data-am'. [ 81s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/python' [ 81s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/python' [ 81s] Making install in tests [ 81s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/tests' [ 81s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/tests' [ 81s] make[2]: Nothing to be done for 'install-exec-am'. [ 81s] make[2]: Nothing to be done for 'install-data-am'. [ 81s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/tests' [ 81s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/tests' [ 81s] Making install in po [ 81s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/po' [ 81s] /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/share [ 81s] installing cs.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/share/locale/cs/LC_MESSAGES/cryptsetup.mo [ 81s] installing de.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/share/locale/de/LC_MESSAGES/cryptsetup.mo [ 81s] installing es.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/share/locale/es/LC_MESSAGES/cryptsetup.mo [ 81s] installing fi.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/share/locale/fi/LC_MESSAGES/cryptsetup.mo [ 81s] installing fr.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/share/locale/fr/LC_MESSAGES/cryptsetup.mo [ 81s] installing id.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/share/locale/id/LC_MESSAGES/cryptsetup.mo [ 81s] installing it.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/share/locale/it/LC_MESSAGES/cryptsetup.mo [ 81s] installing nl.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/share/locale/nl/LC_MESSAGES/cryptsetup.mo [ 81s] installing pl.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/share/locale/pl/LC_MESSAGES/cryptsetup.mo [ 81s] installing sv.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/share/locale/sv/LC_MESSAGES/cryptsetup.mo [ 81s] installing uk.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/share/locale/uk/LC_MESSAGES/cryptsetup.mo [ 81s] installing vi.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/share/locale/vi/LC_MESSAGES/cryptsetup.mo [ 81s] if test "cryptsetup" = "gettext-tools"; then \ [ 81s] /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/share/gettext/po; \ [ 81s] for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ [ 81s] /bin/install -c -m 644 ./$file \ [ 81s] /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/share/gettext/po/$file; \ [ 81s] done; \ [ 81s] for file in Makevars; do \ [ 81s] rm -f /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/share/gettext/po/$file; \ [ 81s] done; \ [ 81s] else \ [ 81s] : ; \ [ 81s] fi [ 81s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/po' [ 81s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 81s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 81s] make[2]: Nothing to be done for 'install-exec-am'. [ 81s] make[2]: Nothing to be done for 'install-data-am'. [ 81s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 81s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 81s] + rm -f /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/share/info/dir [ 81s] + find /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64 -regex '.*\.la$' [ 81s] + xargs rm -f -- [ 81s] + find /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64 -regex '.*\.a$' [ 81s] + xargs rm -f -- [ 81s] + cp -a /home/abuild/rpmbuild/SOURCES/cryptsetup.manifest /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/share/binary_package_name.manifest [ 81s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7 [ 82s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/lib64/libcryptsetup.so.4.7.0 [ 82s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/sbin/cryptsetup [ 82s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/sbin/veritysetup [ 83s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 83s] cpio: glibc-2.24/csu/init.c: Cannot stat: No such file or directory [ 83s] cpio: glibc-2.24/sysdeps/aarch64/crti.S: Cannot stat: No such file or directory [ 83s] cpio: glibc-2.24/sysdeps/aarch64/crtn.S: Cannot stat: No such file or directory [ 83s] cpio: glibc-2.24/sysdeps/aarch64/start.S: Cannot stat: No such file or directory [ 83s] 858 blocks [ 83s] + /usr/lib/rpm/check-buildroot [ 83s] + /usr/lib/rpm//brp-compress [ 83s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 83s] + /usr/lib/rpm/brp-python-hardlink [ 83s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64 [ 83s] Processing files: cryptsetup-1.6.7-2.1.aarch64 [ 83s] Aptk: PG1hbmlmZXN0PgogICAgICAgIDxyZXF1ZXN0PgogICAgICAgICAgICAgICAgPGRv [ 83s] bWFpbiBuYW1lPSJfIi8+CiAgICAgICAgPC9yZXF1ZXN0Pgo8L21hbmlmZXN0PgoK [ 83s] [ 83s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.IzhyOG [ 83s] + umask 022 [ 83s] + cd /home/abuild/rpmbuild/BUILD [ 83s] + cd cryptsetup-1.6.7 [ 83s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/share/licenses/cryptsetup [ 83s] + export LICENSEDIR [ 83s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/share/licenses/cryptsetup [ 83s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64/usr/share/licenses/cryptsetup [ 83s] + exit 0 [ 83s] Provides: cryptsetup = 1.6.7-2.1 cryptsetup(aarch-64) = 1.6.7-2.1 libcryptsetup.so.4()(64bit) libcryptsetup.so.4(CRYPTSETUP_1.0)(64bit) [ 83s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 83s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 83s] Requires(post): /sbin/ldconfig [ 83s] Requires(postun): /sbin/ldconfig [ 83s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libcryptsetup.so.4()(64bit) libcryptsetup.so.4(CRYPTSETUP_1.0)(64bit) libdevmapper.so.1.02()(64bit) libdevmapper.so.1.02(Base)(64bit) libgcrypt.so.20()(64bit) libgcrypt.so.20(GCRYPT_1.6)(64bit) libpopt.so.0()(64bit) libpopt.so.0(LIBPOPT_0)(64bit) libuuid.so.1()(64bit) libuuid.so.1(UUID_1.0)(64bit) [ 83s] Processing files: cryptsetup-debugsource-1.6.7-2.1.aarch64 [ 83s] Provides: cryptsetup-debugsource = 1.6.7-2.1 cryptsetup-debugsource(aarch-64) = 1.6.7-2.1 [ 83s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 83s] Processing files: cryptsetup-devel-1.6.7-2.1.aarch64 [ 83s] Provides: cryptsetup-devel = 1.6.7-2.1 cryptsetup-devel(aarch-64) = 1.6.7-2.1 pkgconfig(libcryptsetup) = 1.6.7 [ 83s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 83s] Requires: /usr/bin/pkg-config libcryptsetup.so.4()(64bit) [ 83s] Processing files: cryptsetup-locale-1.6.7-2.1.aarch64 [ 83s] Provides: cryptsetup-locale = 1.6.7-2.1 cryptsetup-locale(aarch-64) = 1.6.7-2.1 [ 83s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 83s] Processing files: cryptsetup-doc-1.6.7-2.1.aarch64 [ 83s] Provides: cryptsetup-doc = 1.6.7-2.1 cryptsetup-doc(aarch-64) = 1.6.7-2.1 [ 83s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 83s] Processing files: cryptsetup-debuginfo-1.6.7-2.1.aarch64 [ 83s] warning: File listed twice: /usr/lib/debug/.build-id [ 83s] warning: File listed twice: /usr/lib/debug/.build-id [ 83s] Provides: cryptsetup-debuginfo = 1.6.7-2.1 cryptsetup-debuginfo(aarch-64) = 1.6.7-2.1 [ 83s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 83s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64 [ 83s] warning: Could not canonicalize hostname: obsnw18 [ 84s] Wrote: /home/abuild/rpmbuild/SRPMS/cryptsetup-1.6.7-2.1.src.rpm [ 84s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/cryptsetup-1.6.7-2.1.aarch64.rpm [ 84s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/cryptsetup-debugsource-1.6.7-2.1.aarch64.rpm [ 84s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/cryptsetup-devel-1.6.7-2.1.aarch64.rpm [ 84s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/cryptsetup-locale-1.6.7-2.1.aarch64.rpm [ 84s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/cryptsetup-doc-1.6.7-2.1.aarch64.rpm [ 84s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/cryptsetup-debuginfo-1.6.7-2.1.aarch64.rpm [ 84s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.IqdY59 [ 84s] + umask 022 [ 84s] + cd /home/abuild/rpmbuild/BUILD [ 84s] + cd cryptsetup-1.6.7 [ 84s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-2.1.aarch64 [ 84s] + exit 0 [ 84s] ... checking for files with abuild user/group [ 84s] ... creating baselibs [ 85s] ... comparing built packages with the former built [ 85s] /usr/lib/build/pkg-diff.sh [ 85s] compare /.build.oldpackages/cryptsetup-1.6.7-1.1.src.rpm /home/abuild/rpmbuild/SRPMS/cryptsetup-1.6.7-2.1.src.rpm [ 85s] This is not a prerelease project. Compare the project name. [ 85s] comparing rpmtags [ 85s] comparing RELEASE [ 86s] comparing PROVIDES [ 86s] comparing scripts [ 86s] comparing filelist [ 86s] comparing file checksum [ 86s] RPM meta information is identical [ 86s] compare /.build.oldpackages/cryptsetup-1.6.7-1.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/cryptsetup-1.6.7-2.1.aarch64.rpm [ 86s] Comparing cryptsetup-1.6.7-1.1.aarch64.rpm to cryptsetup-1.6.7-2.1.aarch64.rpm [ 86s] This is not a prerelease project. Compare the project name. [ 86s] comparing rpmtags [ 86s] --- /tmp/tmp.UzWxA70097/tmp.YSKfh70115 2017-08-29 03:12:03.708145250 +0000 [ 86s] +++ /tmp/tmp.UzWxA70097/tmp.lBPeM70117 2017-08-29 03:12:03.728145550 +0000 [ 86s] @@ -8,4 +8,4 @@ [ 86s] cpio xz 5T [ 86s] [ 86s] (none) (none) (none) [ 86s] -obs://build.tizen.org/Tizen:4.0:Unified/standard/8b28201d673b4fd1648f6f35943ad5a4-cryptsetup Tizen:4.0:Unified [ 86s] +obs://build.tizen.org/Tizen:4.0:Unified/standard/be88ca840cb723720d546352fc530ace-cryptsetup Tizen:4.0:Unified [ 86s] RPM meta information is different [ 86s] compare /.build.oldpackages/cryptsetup-debuginfo-1.6.7-1.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/cryptsetup-debuginfo-1.6.7-2.1.aarch64.rpm [ 86s] skipping -debuginfo package [ 86s] compare /.build.oldpackages/cryptsetup-debugsource-1.6.7-1.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/cryptsetup-debugsource-1.6.7-2.1.aarch64.rpm [ 87s] Comparing cryptsetup-debugsource-1.6.7-1.1.aarch64.rpm to cryptsetup-debugsource-1.6.7-2.1.aarch64.rpm [ 87s] This is not a prerelease project. Compare the project name. [ 87s] comparing rpmtags [ 87s] --- /tmp/tmp.vofCh70137/tmp.ExyEQ70155 2017-08-29 03:12:04.128151551 +0000 [ 87s] +++ /tmp/tmp.vofCh70137/tmp.EIpio70157 2017-08-29 03:12:04.140151732 +0000 [ 87s] @@ -10,4 +10,4 @@ [ 87s] cpio xz 5T [ 87s] [ 87s] (none) (none) (none) [ 87s] -obs://build.tizen.org/Tizen:4.0:Unified/standard/8b28201d673b4fd1648f6f35943ad5a4-cryptsetup Tizen:4.0:Unified [ 87s] +obs://build.tizen.org/Tizen:4.0:Unified/standard/be88ca840cb723720d546352fc530ace-cryptsetup Tizen:4.0:Unified [ 87s] RPM meta information is different [ 87s] compare /.build.oldpackages/cryptsetup-devel-1.6.7-1.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/cryptsetup-devel-1.6.7-2.1.aarch64.rpm [ 87s] Comparing cryptsetup-devel-1.6.7-1.1.aarch64.rpm to cryptsetup-devel-1.6.7-2.1.aarch64.rpm [ 87s] This is not a prerelease project. Compare the project name. [ 87s] comparing rpmtags [ 87s] --- /tmp/tmp.YVFnO70175/tmp.CLlHo70193 2017-08-29 03:12:04.504157192 +0000 [ 87s] +++ /tmp/tmp.YVFnO70175/tmp.sGeqv70195 2017-08-29 03:12:04.516157372 +0000 [ 87s] @@ -8,4 +8,4 @@ [ 87s] cpio xz 5T [ 87s] [ 87s] (none) (none) (none) [ 87s] -obs://build.tizen.org/Tizen:4.0:Unified/standard/8b28201d673b4fd1648f6f35943ad5a4-cryptsetup Tizen:4.0:Unified [ 87s] +obs://build.tizen.org/Tizen:4.0:Unified/standard/be88ca840cb723720d546352fc530ace-cryptsetup Tizen:4.0:Unified [ 87s] RPM meta information is different [ 87s] compare /.build.oldpackages/cryptsetup-doc-1.6.7-1.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/cryptsetup-doc-1.6.7-2.1.aarch64.rpm [ 87s] Comparing cryptsetup-doc-1.6.7-1.1.aarch64.rpm to cryptsetup-doc-1.6.7-2.1.aarch64.rpm [ 87s] This is not a prerelease project. Compare the project name. [ 87s] comparing rpmtags [ 87s] --- /tmp/tmp.YVpuD70213/tmp.mYiqU70231 2017-08-29 03:12:04.892163013 +0000 [ 87s] +++ /tmp/tmp.YVpuD70213/tmp.qePkZ70233 2017-08-29 03:12:04.908163253 +0000 [ 87s] @@ -8,4 +8,4 @@ [ 87s] cpio xz 5T [ 87s] [ 87s] (none) (none) (none) [ 87s] -obs://build.tizen.org/Tizen:4.0:Unified/standard/8b28201d673b4fd1648f6f35943ad5a4-cryptsetup Tizen:4.0:Unified [ 87s] +obs://build.tizen.org/Tizen:4.0:Unified/standard/be88ca840cb723720d546352fc530ace-cryptsetup Tizen:4.0:Unified [ 87s] RPM meta information is different [ 87s] compare /.build.oldpackages/cryptsetup-locale-1.6.7-1.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/cryptsetup-locale-1.6.7-2.1.aarch64.rpm [ 88s] Comparing cryptsetup-locale-1.6.7-1.1.aarch64.rpm to cryptsetup-locale-1.6.7-2.1.aarch64.rpm [ 88s] This is not a prerelease project. Compare the project name. [ 88s] comparing rpmtags [ 88s] --- /tmp/tmp.oTKKd70251/tmp.vVwbY70269 2017-08-29 03:12:05.276168774 +0000 [ 88s] +++ /tmp/tmp.oTKKd70251/tmp.YGrGB70271 2017-08-29 03:12:05.292169013 +0000 [ 88s] @@ -8,4 +8,4 @@ [ 88s] cpio xz 5T [ 88s] [ 88s] (none) (none) (none) [ 88s] -obs://build.tizen.org/Tizen:4.0:Unified/standard/8b28201d673b4fd1648f6f35943ad5a4-cryptsetup Tizen:4.0:Unified [ 88s] +obs://build.tizen.org/Tizen:4.0:Unified/standard/be88ca840cb723720d546352fc530ace-cryptsetup Tizen:4.0:Unified [ 88s] RPM meta information is different [ 88s] [ 88s] obsnw18 finished "build cryptsetup.spec" at Tue Aug 29 03:12:05 UTC 2017. [ 88s] Retried build at Sat Sep 9 03:47:33 2017 returned same result, skipped Retried build at Fri Sep 15 21:25:50 2017 returned same result, skipped Retried build at Tue Sep 26 06:25:21 2017 returned same result, skipped Retried build at Fri Sep 29 11:18:12 2017 returned same result, skipped