[ 0s] Memory limit set to 82441344KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_7 [ 0s] Using BUILD_ARCH=aarch64 [ 0s] [ 0s] [ 0s] obsnw01 started "build _service:gbs:dos2unix.spec" at Fri Apr 13 18:11:16 UTC 2018. [ 0s] [ 0s] Building dos2unix for project 'Tizen:4.0:Unified' repository 'standard' arch 'aarch64' srcmd5 'e6ae400baf3623bc2bbb8e687602ab13' [ 0s] [ 0s] processing recipe /var/cache/build/root_7/.build-srcdir/_service:gbs:dos2unix.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_7/.build-srcdir/_service:gbs:dos2unix.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/7/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_7/.build.rpmlist /var/cache/build/root_7/.build-srcdir/_service:gbs:dos2unix.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] interpreter for 'aarch64' is -1 [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/7/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/40] preinstalling libmagic-data... [ 0s] [2/40] preinstalling setup... [ 0s] [3/40] preinstalling filesystem... [ 0s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling bash... [ 1s] [6/40] preinstalling diffutils... [ 1s] [7/40] preinstalling grep... [ 1s] [8/40] preinstalling libattr... [ 1s] [9/40] preinstalling libbz2... [ 1s] [10/40] preinstalling libcap... [ 1s] [11/40] preinstalling libelf... [ 1s] [12/40] preinstalling libfreebl3... [ 1s] [13/40] preinstalling libgcc... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling zlib... [ 1s] [24/40] preinstalling qemu-accel-x86_64-aarch64... [ 5s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 5s] [26/40] preinstalling coreutils... [ 5s] [27/40] preinstalling libacl... [ 5s] [28/40] preinstalling libblkid... [ 5s] [29/40] preinstalling libreadline... [ 5s] [30/40] preinstalling smack... [ 6s] [31/40] preinstalling bzip2... [ 6s] [32/40] preinstalling libmagic... [ 6s] [33/40] preinstalling libxml2... [ 6s] [34/40] preinstalling libmount... [ 6s] [35/40] preinstalling tar... [ 6s] [36/40] preinstalling util-linux... [ 6s] [37/40] preinstalling util-linux-su... [ 6s] [38/40] preinstalling nss... [ 6s] [39/40] preinstalling libsoftokn3... [ 6s] [40/40] preinstalling rpm... [ 6s] [ 6s] running qemu-linux-user-x86_64-cross postinstall script [ 6s] running qemu-accel-x86_64-aarch64 postinstall script [ 6s] ln: creating symbolic link `/usr/lib64/gcc/aarch64-tizen-linux-gnu/6.2.1/liblto_plugin.so': No such file or directory [ 6s] running setup postinstall script [ 6s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 6s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 6s] initializing rpm db... [ 6s] reordering...cycle: libsoftokn3 -> nss [ 6s] breaking dependency nss -> libsoftokn3 [ 6s] done [ 6s] [1/95] installing libmagic-data-5.32-4.20 [ 6s] [2/95] installing setup-0.9-2.17 [ 7s] [3/95] installing filesystem-3.1-3.1 [ 7s] [4/95] installing glibc-2.24-5.12 [ 7s] [5/95] installing bash-3.2.57-4.1 [ 7s] [6/95] installing binutils-2.27-3.49 [ 7s] [7/95] installing cpio-2.11-2.1 [ 7s] [8/95] installing diffutils-3.3-2.1 [ 7s] [9/95] installing findutils-4.3.8-3.53 [ 7s] [10/95] installing hostname-3.12-2.1 [ 7s] [11/95] installing libatomic-6.2.1-5.1 [ 7s] [12/95] installing libattr-2.4.47-3.27 [ 7s] [13/95] installing libbz2-1.0.6-2.72 [ 7s] [14/95] installing libcap-2.24-2.81 [ 8s] [15/95] installing libelf-0.153-2.39 [ 8s] [16/95] installing libext2fs-1.43.4-2.1 [ 8s] [17/95] installing libfreebl3-3.34.1-3.18 [ 8s] [18/95] installing libgcc-6.2.1-5.1 [ 8s] [19/95] installing libgomp-6.2.1-5.1 [ 8s] [20/95] installing libitm-6.2.1-5.1 [ 8s] [21/95] installing libltdl-2.4.2-2.67 [ 8s] [22/95] installing liblua-5.1.4-2.24 [ 8s] [23/95] installing liblzma-5.2.2-2.66 [ 8s] [24/95] installing libpcre-8.41-4.1 [ 8s] [25/95] installing libpopt-1.16-2.24 [ 8s] [26/95] installing libsmack-1.3.1-4.23 [ 8s] [27/95] installing libsmartcols-2.30-6.1 [ 8s] [28/95] installing libsqlite-3.21.0-6.4 [ 8s] [29/95] installing libuuid-2.30-6.1 [ 8s] [30/95] installing m4-1.4.17-2.1 [ 8s] [31/95] installing net-tools-2.0_20121208git-2.1 [ 8s] [32/95] installing nspr-4.12-3.6 [ 8s] [33/95] installing patch-2.7-2.24 [ 8s] [34/95] installing pkg-config-0.28-3.51 [ 8s] [35/95] installing sed-4.1c-2.1 [ 9s] [36/95] installing update-alternatives-1.18.15-2.1 [ 9s] [37/95] installing which-2.20-2.1 [ 9s] [38/95] installing zlib-1.2.11-2.79 [ 9s] [39/95] installing build-compare-2015.04.28-2.53 [ 9s] [40/95] installing qemu-linux-user-x86_64-cross-2.7.0-1.5.1 [ 10s] [41/95] installing terminfo-base-full-5.9-3.45 [ 10s] [42/95] installing coreutils-6.9-3.2 [ 10s] [43/95] installing cpp-6.2.1-5.1 [ 11s] [44/95] installing gawk-3.1.5-3.1 [ 11s] [45/95] installing gcc-c++-6.2.1-5.1 [ 12s] [46/95] installing grep-2.5.2-3.1 [ 12s] [47/95] installing libacl-2.2.52-2.80 [ 12s] [48/95] installing libasm-0.153-2.39 [ 12s] [49/95] installing libblkid-2.30-6.1 [ 12s] [50/95] installing libgfortran-6.2.1-5.1 [ 12s] [51/95] installing libstdc++-6.2.1-5.1 [ 12s] [52/95] installing make-4.0-2.24 [ 12s] [53/95] installing nss-certs-3.34.1-3.18 [ 12s] [54/95] installing smack-1.3.1-4.23 [ 12s] [55/95] installing bzip2-1.0.6-2.72 [ 12s] [56/95] installing libmagic-5.32-4.20 [ 12s] [57/95] installing libxml2-2.9.7-3.20 [ 12s] [58/95] installing xz-5.2.2-2.66 [ 12s] [59/95] installing libdw-0.153-2.39 [ 12s] [60/95] installing libstdc++-devel-6.2.1-5.1 [ 13s] [61/95] installing file-5.32-4.20 [ 13s] [62/95] installing libmount-2.30-6.1 [ 13s] [63/95] installing libncurses-5.9-3.45 [ 13s] [64/95] installing libncurses6-5.9-3.45 [ 13s] [65/95] installing linux-glibc-devel-3.10-2.81 [ 13s] [66/95] installing tar-1.17-3.1 [ 13s] [67/95] installing db4-4.8.30.NC-2.76 [ 13s] [68/95] installing gettext-runtime-0.19.7-2.33 [ 13s] [69/95] installing glibc-locale-2.24-5.12 [ 14s] [70/95] installing gzip-1.3.12-4.4 [ 14s] [71/95] installing libcc1-6.2.1-5.1 [ 14s] [72/95] installing libfdisk-2.30-6.1 [ 14s] [73/95] installing libubsan-6.2.1-5.1 [ 14s] [74/95] installing pam-1.1.6-3.1 [ 14s] [75/95] installing tzdata-2017c-3.1 [ 14s] [76/95] installing elfutils-0.153-2.39 [ 14s] [77/95] installing glibc-devel-2.24-5.12 [ 15s] [78/95] installing less-466-2.1 [ 15s] [79/95] installing libreadline-5.2-2.72 [ 15s] [80/95] installing procps-ng-3.3.9-4.1 [ 16s] [81/95] installing gettext-tools-0.19.7-2.33 [ 16s] [82/95] installing perl-5.20.0-4.2 [ 17s] [83/95] installing gcc-6.2.1-5.1 [ 19s] [84/95] installing build-mkbaselibs-20120927-2.1 [ 19s] [85/95] installing qemu-accel-x86_64-aarch64-0.4-4.1 [ 25s] [86/95] installing autoconf-2.69-2.81 [ 25s] [87/95] installing util-linux-2.30-6.1 [ 25s] [88/95] installing util-linux-su-2.30-6.1 [ 25s] [89/95] installing automake-1.14.1-3.17 [ 25s] [90/95] installing build-20120927-2.1 [ 25s] [91/95] installing libtool-2.4.2-2.67 [ 25s] [92/95] installing nss-3.34.1-3.18 [ 26s] [93/95] installing libsoftokn3-3.34.1-3.18 [ 26s] [94/95] installing rpm-4.11.0.1-4.18 [ 26s] [95/95] installing rpm-build-4.11.0.1-4.18 [ 26s] removing nis flags from /var/cache/build/root_7/etc/nsswitch.conf... [ 26s] now finalizing build dir... [ 27s] build target is aarch64-tizen-linux [ 27s] ----------------------------------------------------------------- [ 27s] I have the following modifications for dos2unix.spec: [ 27s] 4c4 [ 27s] < Release: 0 [ 27s] --- [ 27s] > Release: 2.14 [ 27s] ----------------------------------------------------------------- [ 27s] ----- building dos2unix.spec (user abuild) [ 27s] ----------------------------------------------------------------- [ 27s] ----------------------------------------------------------------- [ 27s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:4.0:Unified/standard/e6ae400baf3623bc2bbb8e687602ab13-dos2unix' -ba /home/abuild/rpmbuild/SOURCES/dos2unix.spec [ 27s] Building target platforms: aarch64-tizen-linux [ 27s] Building for target aarch64-tizen-linux [ 27s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.8Oejuh [ 27s] + umask 022 [ 27s] + cd /home/abuild/rpmbuild/BUILD [ 27s] + cd /home/abuild/rpmbuild/BUILD [ 27s] + rm -rf dos2unix-6.0 [ 27s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/dos2unix-6.0.tar.gz [ 27s] + /bin/tar -xf - [ 27s] + STATUS=0 [ 27s] + '[' 0 -ne 0 ']' [ 27s] + cd dos2unix-6.0 [ 27s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 27s] + echo 'Patch #0 (0001-encoding-is-changed-from-latin1-to-utf8.patch):' [ 27s] Patch #0 (0001-encoding-is-changed-from-latin1-to-utf8.patch): [ 27s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-encoding-is-changed-from-latin1-to-utf8.patch [ 27s] + /bin/patch -p1 --fuzz=2 [ 27s] patching file man/es/man1/dos2unix.pod [ 27s] patching file man/nl/man1/dos2unix.pod [ 27s] + cp /home/abuild/rpmbuild/SOURCES/dos2unix.manifest . [ 27s] + find . -type f [ 27s] + xargs chmod -x [ 27s] + exit 0 [ 27s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.QWdLF9 [ 27s] + umask 022 [ 27s] + cd /home/abuild/rpmbuild/BUILD [ 27s] + cd dos2unix-6.0 [ 27s] ++ uname -m [ 27s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 27s] + ref=/usr/lib/rpm [ 27s] + for s in guess sub [ 27s] ++ find -maxdepth 8 -name config.guess [ 27s] + for s in guess sub [ 27s] ++ find -maxdepth 8 -name config.sub [ 27s] + LANG=C [ 27s] + export LANG [ 27s] + unset DISPLAY [ 27s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 27s] + export CFLAGS [ 27s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11' [ 27s] + export CXXFLAGS [ 27s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 27s] + export FFLAGS [ 27s] + LDFLAGS= [ 27s] + export LDFLAGS [ 27s] + LD_AS_NEEDED=1 [ 27s] + export LD_AS_NEEDED [ 27s] + export RPM_OPT_FLAGS [ 27s] + make -j4 CC=gcc HTMLEXT=html [ 27s] gcc -DVER_REVISION=\"6.0\" -DVER_DATE=\"2012-05-06\" -DVER_AUTHOR=\"'Erwin Waterlander'\" -DDEBUG=0 -DD2U_UNICODE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DENABLE_NLS -DLOCALEDIR=\"/usr/share/locale\" -DPACKAGE=\"dos2unix\" -O2 -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -c dos2unix.c -o dos2unix.o [ 27s] gcc -DVER_REVISION=\"6.0\" -DVER_DATE=\"2012-05-06\" -DVER_AUTHOR=\"'Erwin Waterlander'\" -DDEBUG=0 -DD2U_UNICODE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DENABLE_NLS -DLOCALEDIR=\"/usr/share/locale\" -DPACKAGE=\"dos2unix\" -O2 -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -c querycp.c -o querycp.o [ 27s] gcc -DVER_REVISION=\"6.0\" -DVER_DATE=\"2012-05-06\" -DVER_AUTHOR=\"'Erwin Waterlander'\" -DDEBUG=0 -DD2U_UNICODE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DENABLE_NLS -DLOCALEDIR=\"/usr/share/locale\" -DPACKAGE=\"dos2unix\" -O2 -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -c common.c -o common.o [ 27s] gcc -DVER_REVISION=\"6.0\" -DVER_DATE=\"2012-05-06\" -DVER_AUTHOR=\"'Erwin Waterlander'\" -DDEBUG=0 -DD2U_UNICODE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DENABLE_NLS -DLOCALEDIR=\"/usr/share/locale\" -DPACKAGE=\"dos2unix\" -O2 -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -c unix2dos.c -o unix2dos.o [ 27s] LC_CTYPE=C pod2text man/man1/dos2unix.pod > dos2unix.txt [ 27s] pod2html --title="dos2unix 6.0 - DOS/MAC to UNIX and vice versa text file format converter" man/man1/dos2unix.pod > dos2unix.html [ 27s] msgfmt -c po/de.po -o po/de.mo [ 27s] msgfmt -c po/es.po -o po/es.mo [ 27s] po/es.po: warning: Charset "ISO-8859-1" is not supported. msgfmt relies on iconv(), [ 27s] and iconv() does not support "ISO-8859-1". [ 27s] Installing GNU libiconv and then reinstalling GNU gettext [ 27s] would fix this problem. [ 27s] Continuing anyway. [ 27s] po/es.po:8: warning: header field 'Language' still has the initial default value [ 27s] msgfmt -c po/eo.po -o po/eo.mo [ 27s] msgfmt -c po/nl.po -o po/nl.mo [ 27s] po/nl.po: warning: Charset "ISO-8859-1" is not supported. msgfmt relies on iconv(), [ 27s] and iconv() does not support "ISO-8859-1". [ 27s] Installing GNU libiconv and then reinstalling GNU gettext [ 27s] would fix this problem. [ 27s] Continuing anyway. [ 27s] make -C man/man1 [ 27s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 27s] # make target - create manual page from a *.pod page [ 27s] make -C man/man1 [ 27s] podchecker dos2unix.pod [ 27s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 27s] # make target - create manual page from a *.pod page [ 27s] podchecker dos2unix.pod [ 28s] # make target - create manual page from a *.pod page [ 28s] podchecker ../nl/man1/dos2unix.pod [ 28s] # make target - create manual page from a *.pod page [ 28s] podchecker ../nl/man1/dos2unix.pod [ 28s] dos2unix.pod pod syntax OK. [ 28s] dos2unix.pod pod syntax OK. [ 28s] LC_CTYPE=C pod2man \ [ 28s] --center="$(date "+%Y-%m-%d")" \ [ 28s] --name="dos2unix" \ [ 28s] --section="1" \ [ 28s] dos2unix.pod \ [ 28s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 28s] > dos2unix.1 && \ [ 28s] rm -f pod*.tmp [ 28s] LC_CTYPE=C pod2man \ [ 28s] --center="$(date "+%Y-%m-%d")" \ [ 28s] --name="dos2unix" \ [ 28s] --section="1" \ [ 28s] dos2unix.pod \ [ 28s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 28s] > dos2unix.1 && \ [ 28s] rm -f pod*.tmp [ 28s] ../nl/man1/dos2unix.pod pod syntax OK. [ 28s] LC_CTYPE=C pod2man \ [ 28s] --center="$(date "+%Y-%m-%d")" \ [ 28s] --name="dos2unix" \ [ 28s] --section="1" \ [ 28s] ../nl/man1/dos2unix.pod \ [ 28s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 28s] > ../nl/man1/dos2unix.1 && \ [ 28s] rm -f pod*.tmp [ 28s] ../nl/man1/dos2unix.pod pod syntax OK. [ 28s] LC_CTYPE=C pod2man \ [ 28s] --center="$(date "+%Y-%m-%d")" \ [ 28s] --name="dos2unix" \ [ 28s] --section="1" \ [ 28s] ../nl/man1/dos2unix.pod \ [ 28s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 28s] > ../nl/man1/dos2unix.1 && \ [ 28s] rm -f pod*.tmp [ 29s] perl -pli.bak \ [ 29s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 29s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 29s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 29s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 29s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 29s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 29s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 29s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 29s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 29s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 29s] dos2unix.1 [ 29s] # make target - create manual page from a *.pod page [ 29s] podchecker ../es/man1/dos2unix.pod [ 29s] perl -pli.bak \ [ 29s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 29s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 29s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 29s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 29s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 29s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 29s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 29s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 29s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 29s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 29s] dos2unix.1 [ 29s] # make target - create manual page from a *.pod page [ 29s] podchecker ../es/man1/dos2unix.pod [ 29s] ../nl/man1/dos2unix.pod around line 462: Non-ASCII character seen before =encoding in 'België'. Assuming UTF-8 [ 29s] POD document had syntax errors at /bin/pod2man line 71. [ 29s] perl -pli.bak \ [ 29s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 29s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 29s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 29s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 29s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 29s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 29s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 29s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 29s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 29s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 29s] ../nl/man1/dos2unix.1 [ 29s] make -C man/man1 [ 29s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 29s] # make target - create manual page from a *.pod page [ 29s] podchecker ../es/man1/dos2unix.pod [ 29s] ../nl/man1/dos2unix.pod around line 462: Non-ASCII character seen before =encoding in 'België'. Assuming UTF-8 [ 29s] POD document had syntax errors at /bin/pod2man line 71. [ 29s] perl -pli.bak \ [ 29s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 29s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 29s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 29s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 29s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 29s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 29s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 29s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 29s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 29s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 29s] ../nl/man1/dos2unix.1 [ 29s] ../es/man1/dos2unix.pod pod syntax OK. [ 29s] LC_CTYPE=C pod2man \ [ 29s] --center="$(date "+%Y-%m-%d")" \ [ 29s] --name="dos2unix" \ [ 29s] --section="1" \ [ 29s] ../es/man1/dos2unix.pod \ [ 29s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 29s] > ../es/man1/dos2unix.1 && \ [ 29s] rm -f pod*.tmp [ 30s] ../es/man1/dos2unix.pod pod syntax OK. [ 30s] LC_CTYPE=C pod2man \ [ 30s] --center="$(date "+%Y-%m-%d")" \ [ 30s] --name="dos2unix" \ [ 30s] --section="1" \ [ 30s] ../es/man1/dos2unix.pod \ [ 30s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 30s] > ../es/man1/dos2unix.1 && \ [ 30s] rm -f pod*.tmp [ 30s] ../es/man1/dos2unix.pod pod syntax OK. [ 30s] LC_CTYPE=C pod2man \ [ 30s] --center="$(date "+%Y-%m-%d")" \ [ 30s] --name="dos2unix" \ [ 30s] --section="1" \ [ 30s] ../es/man1/dos2unix.pod \ [ 30s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 30s] > ../es/man1/dos2unix.1 && \ [ 30s] rm -f pod*.tmp [ 30s] ../es/man1/dos2unix.pod around line 59: Non-ASCII character seen before =encoding in '[parámetros]'. Assuming UTF-8 [ 30s] ../es/man1/dos2unix.pod around line 59: Non-ASCII character seen before =encoding in '[parámetros]'. Assuming UTF-8 [ 30s] POD document had syntax errors at /bin/pod2man line 71. [ 30s] ../es/man1/dos2unix.pod around line 59: Non-ASCII character seen before =encoding in '[parámetros]'. Assuming UTF-8 [ 30s] perl -pli.bak \ [ 30s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 30s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 30s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 30s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 30s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 30s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 30s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 30s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 30s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 30s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 30s] ../es/man1/dos2unix.1 [ 31s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 31s] gcc dos2unix.o querycp.o common.o -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -o dos2unix [ 31s] gcc unix2dos.o querycp.o common.o -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -o unix2dos [ 31s] ln -sf unix2dos unix2mac [ 31s] ln -sf dos2unix mac2unix [ 31s] POD document had syntax errors at /bin/pod2man line 71. [ 31s] perl -pli.bak \ [ 31s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 31s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 31s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 31s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 31s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 31s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 31s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 31s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 31s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 31s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 31s] ../es/man1/dos2unix.1 [ 31s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 31s] POD document had syntax errors at /bin/pod2man line 71. [ 31s] perl -pli.bak \ [ 31s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 31s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 31s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 31s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 31s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 31s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 31s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 31s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 31s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 31s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 31s] ../es/man1/dos2unix.1 [ 31s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 31s] + exit 0 [ 31s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.lq2YMe [ 31s] + umask 022 [ 31s] + cd /home/abuild/rpmbuild/BUILD [ 31s] + cd dos2unix-6.0 [ 31s] + LANG=C [ 31s] + export LANG [ 31s] + unset DISPLAY [ 31s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64 [ 31s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64 [ 31s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64 install [ 31s] pod2html --title="dos2unix 6.0 - DOS/MAC to UNIX and vice versa text file format converter" man/man1/dos2unix.pod > dos2unix.htm [ 32s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/bin [ 32s] install -m 755 dos2unix /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/bin [ 32s] install -m 755 unix2dos /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/bin [ 32s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/bin; ln -sf dos2unix mac2unix [ 32s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/bin; ln -sf unix2dos unix2mac [ 32s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/share/man/man1 [ 32s] install -m 644 man/man1/dos2unix.1 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/share/man/man1 [ 32s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/share/man/man1; ln -sf dos2unix.1 mac2unix.1 [ 32s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/share/man/man1; ln -sf dos2unix.1 unix2dos.1 [ 32s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/share/man/man1; ln -sf dos2unix.1 unix2mac.1 [ 32s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/share/man/nl/man1/ ; mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/share/man/es/man1/ ; [ 32s] install -m 644 man/nl/man1/dos2unix.1 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/share/man/nl/man1/ ; install -m 644 man/es/man1/dos2unix.1 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/share/man/es/man1/ ; [ 32s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/share/man/nl/man1/ ; ln -sf dos2unix.1 mac2unix.1 ; cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/share/man/es/man1/ ; ln -sf dos2unix.1 mac2unix.1 ; [ 32s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/share/man/nl/man1/ ; ln -sf dos2unix.1 unix2dos.1 ; cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/share/man/es/man1/ ; ln -sf dos2unix.1 unix2dos.1 ; [ 32s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/share/man/nl/man1/ ; ln -sf dos2unix.1 unix2mac.1 ; cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/share/man/es/man1/ ; ln -sf dos2unix.1 unix2mac.1 ; [ 32s] -- install-mo [ 32s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/share/locale/de/LC_MESSAGES ; mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/share/locale/es/LC_MESSAGES ; mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/share/locale/eo/LC_MESSAGES ; mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/share/locale/nl/LC_MESSAGES ; [ 32s] install -m 644 po/de.mo /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/share/locale/de/LC_MESSAGES/dos2unix.mo ; install -m 644 po/es.mo /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/share/locale/es/LC_MESSAGES/dos2unix.mo ; install -m 644 po/eo.mo /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/share/locale/eo/LC_MESSAGES/dos2unix.mo ; install -m 644 po/nl.mo /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/share/locale/nl/LC_MESSAGES/dos2unix.mo ; [ 32s] -- install-doc [ 32s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/share/doc/dos2unix-6.0 [ 32s] install -m 644 README.txt NEWS.txt ChangeLog.txt COPYING.txt TODO.txt BUGS.txt dos2unix.txt dos2unix.htm /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/share/doc/dos2unix-6.0 [ 32s] + rm -f /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/share/info/dir [ 32s] + find /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64 -regex '.*\.la$' [ 32s] + xargs rm -f -- [ 32s] + find /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64 -regex '.*\.a$' [ 32s] + xargs rm -f -- docdir=/usr/share/doc/packages/dos2unix [ 32s] + /usr/lib/rpm/find-lang.sh /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64 dos2unix --all-name --with-man [ 32s] find: `/home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/share/help/': No such file or directory [ 32s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/dos2unix-6.0 [ 32s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/bin/dos2unix [ 32s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64/usr/bin/unix2dos [ 33s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 33s] cpio: glibc-2.24/csu/init.c: Cannot stat: No such file or directory [ 33s] cpio: glibc-2.24/sysdeps/aarch64/crti.S: Cannot stat: No such file or directory [ 33s] cpio: glibc-2.24/sysdeps/aarch64/crtn.S: Cannot stat: No such file or directory [ 33s] cpio: glibc-2.24/sysdeps/aarch64/start.S: Cannot stat: No such file or directory [ 33s] 284 blocks [ 33s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/dos2unix-6.0/dos2unix-debuginfo.manifest [ 33s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/dos2unix-6.0/dos2unix-debugsource.manifest [ 33s] + /usr/lib/rpm/check-buildroot [ 33s] + /usr/lib/rpm//brp-compress [ 33s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 33s] + /usr/lib/rpm/brp-python-hardlink [ 33s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64 [ 33s] Processing files: dos2unix-6.0-2.14.aarch64 [ 33s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 33s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 33s] [ 33s] Provides: dos2unix = 6.0-2.14 dos2unix(aarch-64) = 6.0-2.14 unix2dos = 6.0 [ 33s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 33s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) [ 33s] Obsoletes: unix2dos < 6.0 [ 33s] Processing files: dos2unix-debugsource-6.0-2.14.aarch64 [ 33s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 33s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 33s] [ 33s] Provides: dos2unix-debugsource = 6.0-2.14 dos2unix-debugsource(aarch-64) = 6.0-2.14 [ 33s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 33s] Processing files: dos2unix-debuginfo-6.0-2.14.aarch64 [ 33s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 33s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 33s] [ 33s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 33s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 33s] [ 33s] warning: File listed twice: /usr/lib/debug/.build-id [ 33s] Provides: dos2unix-debuginfo = 6.0-2.14 dos2unix-debuginfo(aarch-64) = 6.0-2.14 [ 33s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 33s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64 [ 33s] warning: Could not canonicalize hostname: obsnw01 [ 33s] Wrote: /home/abuild/rpmbuild/SRPMS/dos2unix-6.0-2.14.src.rpm [ 33s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/dos2unix-6.0-2.14.aarch64.rpm [ 33s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/dos2unix-debugsource-6.0-2.14.aarch64.rpm [ 33s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/dos2unix-debuginfo-6.0-2.14.aarch64.rpm [ 33s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.b21GOd [ 33s] + umask 022 [ 33s] + cd /home/abuild/rpmbuild/BUILD [ 33s] + cd dos2unix-6.0 [ 33s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-2.14.aarch64 [ 33s] + exit 0 [ 33s] ... checking for files with abuild user/group [ 33s] ... creating baselibs [ 34s] ... comparing built packages with the former built [ 34s] /usr/lib/build/pkg-diff.sh [ 34s] compare /.build.oldpackages/dos2unix-6.0-2.13.src.rpm /home/abuild/rpmbuild/SRPMS/dos2unix-6.0-2.14.src.rpm [ 34s] This is not a prerelease project. Compare the project name. [ 34s] comparing rpmtags [ 34s] comparing RELEASE [ 34s] comparing PROVIDES [ 34s] comparing scripts [ 34s] comparing filelist [ 34s] comparing file checksum [ 34s] RPM meta information is identical [ 34s] compare /.build.oldpackages/dos2unix-6.0-2.13.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/dos2unix-6.0-2.14.aarch64.rpm [ 34s] Comparing dos2unix-6.0-2.13.aarch64.rpm to dos2unix-6.0-2.14.aarch64.rpm [ 34s] This is not a prerelease project. Compare the project name. [ 34s] comparing rpmtags [ 34s] comparing RELEASE [ 35s] comparing PROVIDES [ 35s] comparing scripts [ 35s] comparing filelist [ 35s] comparing file checksum [ 35s] creating rename script [ 35s] RPM file checksum differs. [ 35s] Extracting packages [ 35s] Package content is identical [ 35s] compare /.build.oldpackages/dos2unix-debuginfo-6.0-2.13.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/dos2unix-debuginfo-6.0-2.14.aarch64.rpm [ 35s] skipping -debuginfo package [ 35s] compare /.build.oldpackages/dos2unix-debugsource-6.0-2.13.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/dos2unix-debugsource-6.0-2.14.aarch64.rpm [ 35s] Comparing dos2unix-debugsource-6.0-2.13.aarch64.rpm to dos2unix-debugsource-6.0-2.14.aarch64.rpm [ 35s] This is not a prerelease project. Compare the project name. [ 35s] comparing rpmtags [ 35s] comparing RELEASE [ 35s] comparing PROVIDES [ 35s] comparing scripts [ 35s] comparing filelist [ 35s] comparing file checksum [ 36s] creating rename script [ 36s] RPM meta information is identical [ 36s] compare validated built as identical ! [ 36s] [ 36s] obsnw01 finished "build dos2unix.spec" at Fri Apr 13 18:11:52 UTC 2018. [ 36s]