Notes de version d'openSUSE 12.3

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Version :

12.3.4 (2013-02-27)

Copyright © 2013 Novell, Inc.

Il est permis de copier, distribuer et/ou modifier ce document selon les
conditions de la licence GNU Free Documentation, Version 1.2 ou n'importe
quelle version plus récente publiée par la Free Software Foundation ; sans
section inaltérable, sans texte de première page de couverture ni texte de
dernière page de couverture. Une copie de la licence est incluse dans le
fichier fdl.txt.

Si vous mettez à jour une ancienne installation vers cette version
d'openSUSE, consultez les précédentes notes de version listées ici : http:/
/en.opensuse.org/openSUSE:Release_Notes

Ces notes de version traitent des points suivants :

  • Section 1, « Divers » : ces éléments sont automatiquement inclus à
    partir d'openFATE, le système de gestion des fonctionnalités et
    exigences fonctionnelles (http://features.opensuse.org).

    N/A

  • Section 2, « Installation » : lisez ceci si vous voulez installer un
    nouveau système.

  • Section 3, « Généralités » : les informations qui s'adressent à tous.

  • Section 4, « Mise à niveau du système » : problèmes liés à une mise à
    niveau du système depuis la version précédente à cette version
    d'openSUSE.

  • Section 5, « Aspects techniques » : cette section contient un certain
    nombre de modifications et améliorations techniques qui s'adressent à
    l'utilisateur expérimenté.

1. Divers

N/A

2. Installation

2.1. Pour des informations détaillées sur l'installation

Pour des informations détaillées sur l'installation, voir Section 3.1,
« Documentation openSUSE ».

3. Généralités

3.1. Documentation openSUSE

  • Dans le Guide de démarrage, vous trouverez des instructions
    d'installation étape par étape, ainsi qu'une introduction aux bureaux
    KDE et GNOME et à la suite LibreOffice. Les questions d'administration
    générale y sont également évoquées, comme le déploiement, la gestion de
    logiciels et une introduction au shell bash.

  • Le Guide de Référence couvre l'administration et la configuration du
    système en détail, et explique comment configurer divers services
    réseau.

  • Le Guide de la Sécurité introduit certains concepts de base de la
    sécurité système, couvrant à la fois les aspects de sécurité locale et
    réseau.

  • Le Guide d'analyse et de réglage du système aide à la détection de
    problèmes, à leur résolution et à l'optimisation.

  • La Virtualisation avec KVM offre une introduction à la mise en place et
    à la gestion de la virtualisation avec les outils KVM, libvirt et QEMU.

Retrouvez la documentation dans /usr/share/doc/manual/
opensuse-manuals_$LANG après avoir installéle paquet
opensuse-manuals_$LANG, ou en ligne sur http://doc.opensuse.org.

3.2. UEFI—Unified Extensible Firmware Interface

Prior to installing openSUSE on a system that boots using UEFI (Unified
Extensible Firmware Interface) you are urgently advised to check for any
firmware updates the hardware vendor recommends and, if availale, to
install such an update. A pre-installed Windows 8 is a strong indication
that your system boots using UEFI.

Background: Some UEFI firmware has bugs that cause it to break if too much
data gets written to the UEFI storage area. Nobody really knows how much
"too much" is, though. openSUSE minimizes the risk by not writing more than
the bare minimum required to boot the OS. The minimum means telling the
UEFI firmware about the location of the openSUSE boot loader. Upstream
Linux Kernel features that use the UEFI storage area for storing boot and
crash information (pstore) have been disabled by default. Nevertheless it
is recommended to install any firmware updates the hardware vendor
recommends.

4. Mise à niveau du système

4.1. systemd: Activating NetworkManager with a network.service Alias Link

By default, you use the YaST Network Settings dialog (yast2 network) to
activate NetworkManager. If you want to activate NetworkManager, proceed as
follows.

The NETWORKMANAGER sysconfig variable in /etc/sysconfig/network/config to
activate NetworkManager has been replaced with a systemd network.service
alias link, which will be created with the

systemctl enable  NetworkManager.service

command. It causes the creation of a network.service alias link pointing to
the NetworkManager.service, and thus deactivates the /etc/init.d/network
script. The command

systemctl -p Id show network.service

allows to query the currently selected network service.

Pour activer NetworkManager, utilisez :

  • First, stop the running service:

    systemctl     is-active network.service && \
     systemctl     stop      network.service

  • Activez le service NetworkManager :

    systemctl --force        enable NetworkManager.service

  • Start the NetworkManager service (via alias link):

    systemctl     start     network.service

Pour désactiver NetworkManager, utilisez :

  • Arrêtez le service en cours d'exécution :

    systemctl     is-active network.service && \
     systemctl     stop      network.service

  • Désactivez le service NetworkManager :

    systemctl disable NetworkManager.service

  • Démarrez le service /etc/init.d/network :

    systemctl     start  network.service

To query the currently selected service, use:

systemctl -p Id show     network.service

It returns "Id=NetworkManager.service" if the NetworkManager service is
enabled, otherwise "Id=network.service" and /etc/init.d/network is acting
as the network service.

4.2. Variable SYSLOG_DAEMON supprimée

The SYSLOG_DAEMON variable has been removed. Previously, it was used to
select the syslog daemon. Starting with openSUSE 12.3, only one syslog
implementation can be installed at a time on a system and will be selected
automatically for usage.

Pour plus de détails, voir la page de manuel syslog(8).

5. Aspects techniques

5.1. Initialisation de la carte graphique avec KMS (Kernel Mode Setting)

With openSUSE 11.3 we switched to KMS (Kernel Mode Setting) for Intel, ATI
and NVIDIA graphics, which now is our default. If you encounter problems
with the KMS driver support (intel, radeon, nouveau), disable KMS by adding
nomodeset to the kernel boot command line. To set this permanently using
Grub 2, the default boot loader, add it to the GRUB_CMDLINE_LINUX_DEFAULT
kernel default load options line in your /etc/default/grub text file as
root and running the terminal command

sudo /usr/sbin/grub2-mkconfig --output=/boot/grub2/grub.cfg

for the changes to take effect. Else, for Grub Legacy, add it to the kernel
command line in /boot/grub/menu.lst, also done as root. This option makes
sure the appropriate kernel module (intel, radeon, nouveau) is loaded with
modeset=0 in initrd, i.e. KMS is disabled.

Dans les rares cas où le chargement du module DRM depuis initrd pose
problème, sans relation avec KMS, il est même possible de désactiver
complètement le chargement du module DRM dans initrd. Pour cela, définissez
la variable sysconfig NO_KMS_IN_INITRD à yes via YaST, ce qui recrée
ensuite l'initrd. Redémarrez votre machine.

Sur Intel sans KMS, le serveur X se replie vers le pilote fbdev (le pilote
intel ne supporte que KMS) ; alternativement, il existe aussi le pilote
"intellegacy" (paquet xorg-x11-driver-video-intel-legacy) qui supporte
toujours UMS (User Mode Setting). Pour l'utiliser, éditez /etc/X11/
xorg.conf.d/50-device.conf et changez la valeur de driver à intellegacy.

Sur ATI pour les cartes graphiques actuelles, le serveur X se rabat sur
radeonhd. Sur NVIDIA sans KMS, le pilote nv est utilisé (le pilote nouveau
ne supporte que KMS). Notez que les cartes graphiques ATI et NVIDIA les
plus récentes basculeront sur fbdev si vous spécifiez le paramètre
d'amorçage du noyau nomodeset.

5.2. systemd : nettoyage des dossiers (/tmp et /var/tmp)

By default, systemd cleans tmp directories daily as configured in /usr/lib/
tmpfiles.d/tmp.conf. Users can change it by copying /usr/lib/tmpfiles.d/
tmp.conf to /etc/tmpfiles.d/tmp.conf and modifying the copied file. It will
override /usr/lib/tmpfiles.d/tmp.conf.

Note : systemd n'honore pas les variables sysconfig obsolètes dans /etc/
sysconfig/cron telles que TMP_DIRS_TO_CLEAR.

5.3. Configurer Postfix

The SuSEconfig.postfix was renamed as /usr/sbin/config.postfix. If you set
sysconfig variables in /etc/sysconfig/postfix or /etc/sysconfig/mail, you
must manually run /usr/sbin/config.postfix as root.

5.4. GNOME: Workaround to Set Shift or Ctrl+Shift as Shortcut Keys for
Input Source Selection

In Gnome 3.6 use the following workaround to set Shift or Ctrl+Shift as
shortcut keys for input source selection:

 1. Install gnome-tweak-tools.

 2. Then in the 'Typing' section, at the very bottom, find the
    'Modifiers-only input source switch' option, where you can set Ctrl
    Shift_L, for example (meaning, Ctrl key and left shift) or Shift_L
    Shift_R (meaning both Shift Keys).

This is also being tracked in the upstream bug report https://
bugzilla.gnome.org/show_bug.cgi?id=689839.

