#! /bin/sh
# Copyright (c) 1995-1999 SuSE GmbH Nuernberg, Germany.
#
# Author: Thorsten Kukuk <kukuk@suse.de>
#
# /etc/init.d/identd
#
#   and symbolic its link
#
# /usr/sbin/rcidentd
#
### BEGIN INIT INFO
# Provides: identd
# Required-Start: $remote_fs
# Required-Stop: $remote_fs
# Default-Start: 3 5
# Default-Stop: 0 1 6
# Description: Start identd
### END INIT INFO


IDENTD_BIN=/usr/sbin/in.identd
test -x $IDENTD_BIN || exit 5

# Shell functions sourced from /etc/rc.status:
#      rc_check         check and set local and overall rc status
#      rc_status        check and set local and overall rc status
#      rc_status -v     ditto but be verbose in local rc status
#      rc_status -v -r  ditto and clear the local rc status
#      rc_failed        set local and overall rc status to failed
#      rc_reset         clear local rc status (overall remains)
#      rc_exit          exit appropriate to overall rc status
. /etc/rc.status

# First reset status of this service
rc_reset

# Return values acc. to LSB for all commands but status:
# 0 - success
# 1 - misc error
# 2 - invalid or excess args
# 3 - unimplemented feature (e.g. reload)
# 4 - insufficient privilege
# 5 - program not installed
# 6 - program not configured
# 7 - program is not running
# 
# Note that starting an already running service, stopping
# or restarting a not-running service as well as the restart
# with force-reload (in case signalling is not supported) are
# considered a success.

case "$1" in
    start)
        echo -n "Starting identd"
        ## Start daemon with startproc(8). If this fails
        ## the echo return value is set appropriate.

        # startproc should return 0, even if service is 
        # already running to match LSB spec.
        startproc -q $IDENTD_BIN -e

        # Remember status and be verbose
        rc_status -v
        ;;
    stop)
        echo -n "Shutting down identd"
        ## Stop daemon with killproc(8) and if this fails
        ## set echo the echo return value.

        killproc -TERM $IDENTD_BIN

        # Remember status and be verbose
        rc_status -v
        ;;
    try-restart)
        ## Stop the service and if this succeeds (i.e. the 
        ## service was running before), start it again.
        $0 status >/dev/null &&  $0 restart

        # Remember status and be quiet
        rc_status
        ;;
    restart)
        ## Stop the service and regardless of whether it was
        ## running or not, start it again.
        $0 stop
        $0 start

        # Remember status and be quiet
        rc_status
        ;;
    force-reload)
        ## Signal the daemon to reload its config. Most daemons
        ## do this on signal 1 (SIGHUP).
        ## If it does not support it, restart.

        echo -n "Reload service identd"
        ## if it supports it:
        #killproc -HUP $IDENTD_BIN
        #touch /var/run/identd.pid
        #rc_status -v

        ## Otherwise:
        $0 stop  &&  $0 start
        rc_status

        ;;
    reload)
        ## Like force-reload, but if daemon does not support
        ## signalling, do nothing (!)

        # If it supports signalling:
        #echo -n "Reload service identd"
        #killproc -HUP $IDENTD_BIN
        #touch /var/run/identd.pid
        #rc_status -v
        
        # If it does not support reload:
        exit 3
        ;;
    status)
        echo -n "Checking for identd: "
        ## Check status with checkproc(8), if process is running
        ## checkproc will return with exit status 0.

        # Status has a slightly different for the status command:
        # 0 - service running
        # 1 - service dead, but /var/run/  pid  file exists
        # 2 - service dead, but /var/lock/ lock file exists
        # 3 - service not running

	# NOTE: checkproc returns LSB compliant status values.
        checkproc $IDENTD_BIN
        rc_status -v
        ;;
    probe)
        ## Optional: Probe for the necessity of a reload,
        ## give out the argument which is required for a reload.

        test /etc/identd.conf -nt /var/run/identd.pid && echo reload
        ;;
    *)
        echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe}"
        exit 1
        ;;
esac
rc_exit

