[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.5 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] 9cfce1fd6b39 started "build libarchive.spec" at Sat Sep 12 19:33:05 UTC 2026. [ 0s] [ 0s] Building libarchive for project 'Tizen-Base-Toolchain' repository 'standard' arch 'armv7l' srcmd5 '6a8c5beb0e6115df8c1d75da466f8221' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.5/.build-srcdir/libarchive.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.5/.build-srcdir/libarchive.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/5/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.5/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.5/.build-srcdir/libarchive.spec build ... [ 25s] registering binfmt handlers for cross build [ 30s] cycle: nss -> libsoftokn3 [ 30s] breaking dependency nss -> libsoftokn3 [ 30s] [1/46] preinstalling filesystem... [ 30s] [2/46] preinstalling libmagic-data... [ 32s] [3/46] preinstalling libncurses... [ 32s] [4/46] preinstalling glibc... [ 33s] [5/46] preinstalling libgcc... [ 33s] [6/46] preinstalling bash... [ 33s] [7/46] preinstalling diffutils... [ 33s] [8/46] preinstalling grep... [ 33s] [9/46] preinstalling libarchive-tools... [ 33s] [10/46] preinstalling libattr... [ 33s] [11/46] preinstalling libblkid... [ 33s] [12/46] preinstalling libbz2... [ 33s] [13/46] preinstalling libcap... [ 33s] [14/46] preinstalling libfreebl3... [ 34s] [15/46] preinstalling liblua... [ 34s] [16/46] preinstalling liblzma... [ 34s] [17/46] preinstalling libopenssl3... [ 35s] [18/46] preinstalling libpopt... [ 35s] [19/46] preinstalling libreadline... [ 35s] [20/46] preinstalling libsmack... [ 35s] [21/46] preinstalling libsqlite... [ 35s] [22/46] preinstalling libuuid... [ 36s] [23/46] preinstalling libxcrypt... [ 36s] [24/46] preinstalling libxml2... [ 36s] [25/46] preinstalling libzstd1... [ 36s] [26/46] preinstalling nspr... [ 36s] [27/46] preinstalling sed... [ 36s] [28/46] preinstalling toybox... [ 36s] [29/46] preinstalling zlib... [ 36s] [30/46] preinstalling clang-accel-x86_64-armv7l... [ 47s] [31/46] preinstalling qemu-accel-x86_64-armv7l... [ 54s] [32/46] preinstalling qemu-linux-user-x86_64-cross... [ 66s] [33/46] preinstalling coreutils... [ 66s] [34/46] preinstalling dash... [ 66s] [35/46] preinstalling libacl... [ 66s] [36/46] preinstalling libelf... [ 66s] [37/46] preinstalling libmount... [ 66s] [38/46] preinstalling smack... [ 66s] [39/46] preinstalling bzip2... [ 66s] [40/46] preinstalling libmagic... [ 67s] [41/46] preinstalling tar... [ 67s] [42/46] preinstalling util-linux... [ 67s] [43/46] preinstalling rpm... [ 67s] [44/46] preinstalling util-linux-su... [ 67s] [45/46] preinstalling nss... [ 67s] [46/46] preinstalling libsoftokn3... [ 68s] running qemu-linux-user-x86_64-cross postinstall script [ 68s] running qemu-accel-x86_64-armv7l postinstall script [ 68s] mv: cannot stat `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/14.2.0/liblto_plugin.so': No such file or directory [ 68s] running clang-accel-x86_64-armv7l postinstall script [ 68s] initializing rpm db... [ 68s] reordering...cycle: glibc-devel -> libxcrypt-devel [ 68s] breaking dependency libxcrypt-devel -> glibc-devel [ 68s] cycle: clang -> llvm [ 68s] breaking dependency llvm -> clang [ 68s] cycle: clang -> llvm -> lldb [ 68s] breaking dependency llvm -> lldb [ 68s] cycle: libsoftokn3 -> nss [ 68s] breaking dependency nss -> libsoftokn3 [ 68s] done [ 68s] querying package ids... [ 69s] [1/127] cumulate libmagic-data-5.46-1.8 [ 69s] [2/127] cumulate setup-0.9-1.9 [ 69s] [3/127] cumulate filesystem-3.1-1.1 [ 69s] [4/127] cumulate glibc-2.40-1.9 [ 69s] [5/127] cumulate libatomic-14.2.0-1.9 [ 69s] [6/127] cumulate libgcc-14.2.0-1.9 [ 69s] [7/127] cumulate bash-3.2.57-1.8 [ 69s] [8/127] cumulate cpio-2.8-1.1 [ 69s] [9/127] cumulate diffutils-3.10-1.1 [ 69s] [10/127] cumulate findutils-4.3.8-1.9 [ 69s] [11/127] cumulate gdbm-1.8.3-1.9 [ 69s] [12/127] cumulate hostname-3.23-1.1 [ 69s] [13/127] cumulate libarchive-tools-3.8.1-1.3 [ 69s] [14/127] cumulate libattr-2.5.1-1.9 [ 69s] [15/127] cumulate libblkid-2.41.2-1.3 [ 69s] [16/127] cumulate libbz2-1.0.8-1.8 [ 69s] [17/127] cumulate libc++abi-22.1.8-1.1 [ 69s] [18/127] cumulate libcap-2.73-1.8 [ 69s] [19/127] cumulate libcom_err-1.46.0-1.3 [ 69s] [20/127] cumulate libfreebl3-3.109-1.1 [ 69s] [21/127] cumulate libgfortran-14.2.0-1.9 [ 69s] [22/127] cumulate libgomp-14.2.0-1.9 [ 69s] [23/127] cumulate libitm-14.2.0-1.9 [ 69s] [24/127] cumulate libltdl-2.5.4-1.9 [ 69s] [25/127] cumulate liblua-5.1.5-1.7 [ 69s] [26/127] cumulate liblzma-5.8.1-1.8 [ 69s] [27/127] cumulate libopenssl3-3.5.5-1.9 [ 69s] [28/127] cumulate libpcre-8.45-1.9 [ 69s] [29/127] cumulate libpopt-1.16-1.7 [ 69s] [30/127] cumulate libsmack-1.3.1-1.7 [ 69s] [31/127] cumulate libsmartcols-2.41.2-1.3 [ 69s] [32/127] cumulate libsqlite-3.51.0-1.9 [ 69s] [33/127] cumulate libstdc++-14.2.0-1.9 [ 69s] [34/127] cumulate libuuid-2.41.2-1.3 [ 69s] [35/127] cumulate libxcrypt-4.4.36-1.9 [ 69s] [36/127] cumulate libxml2-2.15.1-1.8 [ 69s] [37/127] cumulate libzstd1-1.5.7-1.8 [ 69s] [38/127] cumulate m4-1.4.20-1.1 [ 69s] [39/127] cumulate net-tools-2.0_20121208git-1.4 [ 69s] [40/127] cumulate nspr-4.36-1.1 [ 69s] [41/127] cumulate patch-2.8-1.7 [ 69s] [42/127] cumulate pkg-config-0.29.2-1.8 [ 69s] [43/127] cumulate sed-4.1c-1.9 [ 69s] [44/127] cumulate toybox-0.6.0-1.1 [ 69s] [45/127] cumulate update-alternatives-1.22.21-1.1 [ 69s] [46/127] cumulate which-2.17-1.1 [ 69s] [47/127] cumulate zlib-1.3.1-1.9 [ 69s] [48/127] cumulate app-rootstrap-checker-1.0.0-1.1 [ 69s] [49/127] cumulate build-compare-2023.06.18-1.1 [ 69s] [50/127] cumulate clang-accel-x86_64-armv7l-0.4-1.1 [ 69s] [51/127] cumulate hal-rootstrap-checker-1.0.0-4.1 [ 69s] [52/127] cumulate libc++abi-devel-22.1.8-1.1 [ 69s] [53/127] cumulate libstdc++-devel-14.2.0-1.9 [ 69s] [54/127] cumulate qemu-linux-user-x86_64-cross-9.2.3.1-3.2 [ 69s] [55/127] cumulate cpp-14.2.0-1.9 [ 69s] [56/127] cumulate gcc-c++-14.2.0-1.9 [ 69s] [57/127] cumulate xz-devel-5.8.1-1.8 [ 69s] [58/127] cumulate binutils-libs-2.43-1.9 [ 69s] [59/127] cumulate coreutils-6.9-14.1 [ 69s] [60/127] cumulate dash-0.5.13.4-1.1 [ 69s] [61/127] cumulate gawk-3.1.5-1.1 [ 69s] [62/127] cumulate grep-2.5.2-1.10 [ 69s] [63/127] cumulate libacl-2.3.2-1.9 [ 69s] [64/127] cumulate libc++-22.1.8-1.1 [ 69s] [65/127] cumulate libcc1-14.2.0-1.9 [ 69s] [66/127] cumulate libelf-0.189-1.9 [ 69s] [67/127] cumulate libext2fs-1.46.0-1.3 [ 69s] [68/127] cumulate liblastlog2-2.41.2-1.3 [ 69s] [69/127] cumulate libmount-2.41.2-1.3 [ 69s] [70/127] cumulate libxml2-tools-2.15.1-1.8 [ 69s] [71/127] cumulate make-4.4.1-1.9 [ 69s] [72/127] cumulate nss-certs-3.109-1.1 [ 69s] [73/127] cumulate smack-1.3.1-1.7 [ 69s] [74/127] cumulate bison-3.0.5-1.9 [ 69s] [75/127] cumulate bzip2-1.0.8-1.8 [ 69s] [76/127] cumulate libfdisk-2.41.2-1.3 [ 69s] [77/127] cumulate libmagic-5.46-1.8 [ 69s] [78/127] cumulate xz-5.8.1-1.8 [ 69s] [79/127] cumulate libllvm-22.1.8-1.7 [ 69s] [80/127] cumulate perl-5.42.0-1.9 [ 69s] [81/127] cumulate build-mkbaselibs-20120927-1.1 [ 69s] [82/127] cumulate linux-glibc-devel-6.6-1.9 [ 69s] [83/127] cumulate libc++-devel-22.1.8-1.1 [ 69s] [84/127] cumulate terminfo-base-full-6.6-1.3 [ 69s] [85/127] cumulate autoconf-2.71-1.9 [ 69s] [86/127] cumulate glibc-locale-2.40-1.9 [ 69s] [87/127] cumulate tar-1.17-1.1 [ 69s] [88/127] cumulate binutils-2.43-1.9 [ 69s] [89/127] cumulate file-5.46-1.8 [ 69s] [90/127] cumulate gzip-1.3.12-1.8 [ 69s] [91/127] cumulate pam-1.1.6-1.4 [ 69s] [92/127] cumulate tzdata-2025b-1.1 [ 69s] [93/127] cumulate libdw-0.189-1.9 [ 69s] [94/127] cumulate gcc-14.2.0-1.9 [ 69s] [95/127] cumulate qemu-accel-x86_64-armv7l-0.4-1.1 [ 69s] [96/127] cumulate automake-1.16.5-1.9 [ 69s] [97/127] cumulate libasm-0.189-1.9 [ 69s] [98/127] cumulate libncurses5-6.6-1.3 [ 69s] [99/127] cumulate libncurses6-6.6-1.3 [ 69s] [100/127] cumulate build-20120927-1.1 [ 69s] [101/127] cumulate rpm-4.14.1.1-1.4 [ 69s] [102/127] cumulate libncurses-6.6-1.3 [ 69s] [103/127] cumulate less-685-1.1 [ 69s] [104/127] cumulate libreadline-5.2-1.9 [ 69s] [105/127] cumulate libtool-2.5.4-1.9 [ 69s] [106/127] cumulate ncurses-devel-6.6-1.3 [ 69s] [107/127] cumulate elfutils-0.189-1.9 [ 69s] [108/127] cumulate readline-devel-5.2-1.9 [ 69s] [109/127] cumulate util-linux-2.41.2-1.3 [ 69s] [110/127] cumulate util-linux-su-2.41.2-1.3 [ 69s] [111/127] cumulate libxcrypt-devel-4.4.36-1.9 [ 69s] [112/127] cumulate nss-3.109-1.1 [ 69s] [113/127] cumulate llvm-22.1.8-1.7 [ 69s] [114/127] cumulate glibc-devel-2.40-1.9 [ 69s] [115/127] cumulate clang-22.1.8-1.7 [ 69s] [116/127] cumulate libsoftokn3-3.109-1.1 [ 69s] [117/127] cumulate llvm-devel-22.1.8-1.7 [ 69s] [118/127] cumulate bzip2-devel-1.0.8-1.8 [ 69s] [119/127] cumulate libattr-devel-2.5.1-1.9 [ 69s] [120/127] cumulate zlib-devel-1.3.1-1.9 [ 69s] [121/127] cumulate libcom_err-devel-1.46.0-1.3 [ 69s] [122/127] cumulate lldb-22.1.8-1.7 [ 69s] [123/127] cumulate rpm-build-4.14.1.1-1.4 [ 69s] [124/127] cumulate libext2fs-devel-1.46.0-1.3 [ 69s] [125/127] cumulate libopenssl3-devel-3.5.5-1.9 [ 69s] [126/127] cumulate libacl-devel-2.3.2-1.9 [ 69s] [127/127] cumulate libxml2-devel-2.15.1-1.8 [ 69s] now installing cumulated packages [ 95s] Preparing... ######################################## [ 95s] Updating / installing... [ 95s] setup-0.9-1.9 ##############warning: /etc/profile created as /etc/profile.rpmnew [ 95s] ########################## [ 95s] filesystem-3.1-1.1 ######################################## [ 96s] libmagic-data-5.46-1.8 ######################################## [ 97s] glibc-2.40-1.9 ######################################## [ 98s] libgcc-14.2.0-1.9 ######################################## [ 98s] bash-3.2.57-1.8 ######################################## [ 98s] zlib-1.3.1-1.9 ######################################## [ 99s] libstdc++-14.2.0-1.9 ######################################## [ 99s] pkg-config-0.29.2-1.8 ######################################## [ 100s] coreutils-6.9-14.1 ######################################## [ 100s] liblzma-5.8.1-1.8 ######################################## [ 101s] libelf-0.189-1.9 ######################################## [ 101s] libbz2-1.0.8-1.8 ######################################## [ 101s] libxml2-2.15.1-1.8 ######################################## [ 104s] libllvm-22.1.8-1.7 ######################################## [ 104s] libdw-0.189-1.9 ######################################## [ 104s] libxcrypt-4.4.36-1.9 ######################################## [ 105s] libblkid-2.41.2-1.3 ######################################## [ 105s] nspr-4.36-1.1 ######################################## [ 105s] terminfo-base-full-6.6-1.3 ######################################## [ 105s] libncurses6-6.6-1.3 ######################################## [ 106s] libreadline-5.2-1.9 ######################################## [ 106s] pam-1.1.6-1.4 ######################################## [ 106s] libmagic-5.46-1.8 ######################################## [ 106s] libattr-2.5.1-1.9 ######################################## [ 107s] libacl-2.3.2-1.9 ######################################## [ 107s] libc++abi-22.1.8-1.1 ######################################## [ 107s] libcom_err-1.46.0-1.3 ######################################## [ 107s] libfreebl3-3.109-1.1 ######################################## [ 108s] libopenssl3-3.5.5-1.9 ######################################## [ 108s] libpopt-1.16-1.7 ######################################## [ 108s] libsqlite-3.51.0-1.9 ######################################## [ 108s] libuuid-2.41.2-1.3 ######################################## [ 109s] m4-1.4.20-1.1 ######################################## [ 109s] libc++abi-devel-22.1.8-1.1 ######################################## [ 109s] xz-devel-5.8.1-1.8 ######################################## [ 109s] linux-glibc-devel-6.6-1.9 ######################################## [ 109s] libxcrypt-devel-4.4.36-1.9 ######################################## [ 109s] glibc-devel-2.40-1.9 ######################################## [ 110s] zlib-devel-1.3.1-1.9 ######################################## [ 110s] libattr-devel-2.5.1-1.9 ######################################## [ 110s] libcom_err-devel-1.46.0-1.3 ######################################## [ 110s] libfdisk-2.41.2-1.3 ######################################## [ 110s] liblastlog2-2.41.2-1.3 ######################################## [ 110s] libext2fs-1.46.0-1.3 ######################################## [ 110s] libc++-22.1.8-1.1 ######################################## [ 110s] tar-1.17-1.1 ######################################## [ 116s] clang-22.1.8-1.7 ######################################## [ 117s] lldb-22.1.8-1.7 ######################################## [ 119s] llvm-22.1.8-1.7 ######################################## [ 119s] libncurses5-6.6-1.3 ######################################## [ 120s] ncurses-devel-6.6-1.3 ######################################## [ 120s] readline-devel-5.2-1.9 ######################################## [ 120s] nss-certs-3.109-1.1 ######################################## [ 120s] libsoftokn3-3.109-1.1 ######################################## [ 120s] nss-3.109-1.1 ######################################## [ 120s] libmount-2.41.2-1.3 ######################################## [ 120s] libasm-0.189-1.9 ######################################## [ 120s] libxml2-tools-2.15.1-1.8 ######################################## [ 121s] bzip2-1.0.8-1.8 ######################################## [ 121s] xz-5.8.1-1.8 ######################################## [ 121s] gzip-1.3.12-1.8 ######################################## [ 121s] libcc1-14.2.0-1.9 ######################################## [ 121s] binutils-libs-2.43-1.9 ######################################## [ 124s] binutils-2.43-1.9 ######################################## [ 124s] make-4.4.1-1.9 ######################################## [ 124s] findutils-4.3.8-1.9 ######################################## [ 124s] gdbm-1.8.3-1.9 ######################################## [ 129s] perl-5.42.0-1.9 ######################################## [ 129s] build-mkbaselibs-20120927-1.1 ######################################## [ 130s] autoconf-2.71-1.9 ######################################## [ 130s] automake-1.16.5-1.9 ######################################## [ 130s] libcap-2.73-1.8 ######################################## [ 130s] libgfortran-14.2.0-1.9 ######################################## [ 130s] libgomp-14.2.0-1.9 ######################################## [ 131s] libitm-14.2.0-1.9 ######################################## [ 131s] libltdl-2.5.4-1.9 ######################################## [ 131s] liblua-5.1.5-1.7 ######################################## [ 131s] libpcre-8.45-1.9 ######################################## [ 131s] libsmack-1.3.1-1.7 ######################################## [ 132s] libsmartcols-2.41.2-1.3 ######################################## [ 132s] libzstd1-1.5.7-1.8 ######################################## [ 134s] rpm-4.14.1.1-1.4 ######################################## [ 135s] patch-2.8-1.7 ######################################## [ 135s] sed-4.1c-1.9 ######################################## [ 137s] util-linux-2.41.2-1.3 ######################################## [ 137s] libatomic-14.2.0-1.9 ######################################## [ 137s] libtool-2.5.4-1.9 ######################################## [ 137s] build-20120927-1.1 ######################################## [ 137s] libxml2-devel-2.15.1-1.8 ######################################## [ 139s] libc++-devel-22.1.8-1.1 ######################################## [ 139s] libext2fs-devel-1.46.0-1.3 ######################################## [ 139s] libacl-devel-2.3.2-1.9 ######################################## [ 139s] libopenssl3-devel-3.5.5-1.9 ######################################## [ 139s] bzip2-devel-1.0.8-1.8 ######################################## [ 139s] libncurses-6.6-1.3 ######################################## [ 140s] libstdc++-devel-14.2.0-1.9 ######################################## [ 140s] app-rootstrap-checker-1.0.0-1.1 ######################################## [ 141s] build-compare-2023.06.18-1.1 ######################################## [ 164s] clang-accel-x86_64-armv7l-0.4-1.1 ######################################## [ 167s] hal-rootstrap-checker-1.0.0-4.1 ######################################## [ 181s] qemu-linux-user-x86_64-cross-9.2.3.1-3######################################## [ 184s] gcc-14.2.0-1.9 ######################################## [ 209s] qemu-accel-x86_64-armv7l-0.4-1.1 ######################################## [ 209s] util-linux-su-2.41.2-1.3 ######################################## [ 209s] rpm-build-4.14.1.1-1.4 ######################################## [ 209s] smack-1.3.1-1.7 ######################################## [ 209s] grep-2.5.2-1.10 ######################################## [ 209s] elfutils-0.189-1.9 ######################################## [ 213s] llvm-devel-22.1.8-1.7 ######################################## [ 213s] bison-3.0.5-1.9 ######################################## [ 213s] file-5.46-1.8 ######################################## [ 213s] less-685-1.1 ######################################## [ 214s] glibc-locale-2.40-1.9 ######################################## [ 215s] tzdata-2025b-1.1 ######################################## [ 216s] cpp-14.2.0-1.9 ######################################## [ 218s] gcc-c++-14.2.0-1.9 ######################################## [ 218s] dash-0.5.13.4-1.1 ######################################## [ 218s] gawk-3.1.5-1.1 ######################################## [ 218s] cpio-2.8-1.1 ######################################## [ 219s] diffutils-3.10-1.1 ######################################## [ 219s] hostname-3.23-1.1 ######################################## [ 219s] libarchive-tools-3.8.1-1.3 ######################################## [ 219s] net-tools-2.0_20121208git-1.4 ######################################## [ 220s] toybox-0.6.0-1.1 ######################################## [ 220s] update-alternatives-1.22.21-1.1 ######################################## [ 220s] which-2.17-1.1 ######################################## [ 220s] now finalizing build dir... [ 222s] ----------------------------------------------------------------- [ 222s] I have the following modifications for libarchive.spec: [ 222s] 4c4 [ 222s] < Release: 0 [ 222s] --- [ 222s] > Release: 1.4 [ 222s] build target is armv7l-tizen-linux [ 222s] ----------------------------------------------------------------- [ 222s] ----- building libarchive.spec (user abuild) [ 222s] ----------------------------------------------------------------- [ 222s] ----------------------------------------------------------------- [ 223s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-Toolchain/standard/6a8c5beb0e6115df8c1d75da466f8221-libarchive' /home/abuild/rpmbuild/SOURCES/libarchive.spec [ 223s] Building target platforms: armv7l-tizen-linux [ 223s] Building for target armv7l-tizen-linux [ 223s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.ggL3Le [ 223s] + umask 022 [ 223s] + cd /home/abuild/rpmbuild/BUILD [ 223s] + cd /home/abuild/rpmbuild/BUILD [ 223s] + rm -rf libarchive-3.8.1 [ 223s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/v3.8.1.tar.gz [ 223s] + /usr/bin/gnutar -xof - [ 224s] + STATUS=0 [ 224s] + '[' 0 -ne 0 ']' [ 224s] + cd libarchive-3.8.1 [ 224s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 224s] + cp /home/abuild/rpmbuild/SOURCES/libarchive.manifest . [ 224s] + /bin/patch -p1 [ 224s] patching file Makefile.am [ 224s] Hunk #2 succeeded at 292 (offset 1 line). [ 224s] Hunk #3 succeeded at 1077 (offset 32 lines). [ 224s] Hunk #4 succeeded at 1247 (offset 35 lines). [ 224s] Hunk #5 succeeded at 1396 (offset 35 lines). [ 224s] Hunk #6 succeeded at 1502 (offset 36 lines). [ 224s] + /bin/patch -p1 [ 224s] patching file configure [ 224s] Hunk #1 succeeded at 23319 (offset 546 lines). [ 224s] patching file configure.ac [ 224s] Hunk #1 succeeded at 1362 with fuzz 2 (offset 23 lines). [ 224s] + exit 0 [ 224s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.RIgaIr [ 224s] + umask 022 [ 224s] + cd /home/abuild/rpmbuild/BUILD [ 224s] + CFLAGS='-Os -fstack-protector -Wno-unused-command-line-argument -Wno-error=unused-but-set-variable -Wno-error=unused-command-line-argument -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -Wformat -Wformat-security -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -D_FILE_OFFSET_BITS=64 -g -D_REENTRANT -pipe' [ 224s] + export CFLAGS [ 224s] + CXXFLAGS='-Os -fstack-protector -Wno-unused-command-line-argument -Wno-error=unused-but-set-variable -Wno-error=unused-command-line-argument -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -Wformat -Wformat-security -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -D_FILE_OFFSET_BITS=64 -g -D_REENTRANT -pipe' [ 224s] + export CXXFLAGS [ 224s] + LDFLAGS=-Wl,-z,relro,--as-needed,-O1,--hash-style=gnu [ 224s] + export LDFLAGS [ 224s] + cd libarchive-3.8.1 [ 224s] + ref=/usr/lib/rpm [ 224s] + mints=0 [ 224s] + case $(uname -m) in [ 224s] ++ uname -m [ 224s] + for s in guess sub [ 224s] ++ find -maxdepth 8 -name config.guess [ 224s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 224s] + grep -q config-patches@ ./build/autoconf/config.guess [ 224s] ++ sed -n '/^timestamp=/{s///;s/[-'\''"]//g;p;q;}' ./build/autoconf/config.guess [ 224s] ++ tr -d $'\r' [ 224s] + timestamp=20220109 [ 224s] + test -n 20220109 [ 224s] + test 20220109 -ge 0 [ 224s] + for s in guess sub [ 224s] ++ find -maxdepth 8 -name config.sub [ 224s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 224s] + grep -q config-patches@ ./build/autoconf/config.sub [ 224s] ++ sed -n '/^timestamp=/{s///;s/[-'\''"]//g;p;q;}' ./build/autoconf/config.sub [ 224s] ++ tr -d $'\r' [ 224s] + timestamp=20220103 [ 225s] + test -n 20220103 [ 225s] + test 20220103 -ge 0 [ 225s] + export AR=llvm-ar RANLIB=llvm-ranlib [ 225s] + AR=llvm-ar [ 225s] + RANLIB=llvm-ranlib [ 225s] + export CC=armv7l-tizen-linux-gnueabi-clang CXX=armv7l-tizen-linux-gnueabi-clang++ [ 225s] + CC=armv7l-tizen-linux-gnueabi-clang [ 225s] + CXX=armv7l-tizen-linux-gnueabi-clang++ [ 225s] + export 'CFLAGS=-Os -fstack-protector -Wno-unused-command-line-argument -Wno-error=unused-but-set-variable -Wno-error=unused-command-line-argument -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -Wformat -Wformat-security -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -D_FILE_OFFSET_BITS=64 -g -D_REENTRANT -pipe -fPIC' [ 225s] + CFLAGS='-Os -fstack-protector -Wno-unused-command-line-argument -Wno-error=unused-but-set-variable -Wno-error=unused-command-line-argument -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -Wformat -Wformat-security -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -D_FILE_OFFSET_BITS=64 -g -D_REENTRANT -pipe -fPIC' [ 225s] + export 'CXXFLAGS=-Os -fstack-protector -Wno-unused-command-line-argument -Wno-error=unused-but-set-variable -Wno-error=unused-command-line-argument -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -Wformat -Wformat-security -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -D_FILE_OFFSET_BITS=64 -g -D_REENTRANT -pipe -fPIC' [ 225s] + CXXFLAGS='-Os -fstack-protector -Wno-unused-command-line-argument -Wno-error=unused-but-set-variable -Wno-error=unused-command-line-argument -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -Wformat -Wformat-security -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -D_FILE_OFFSET_BITS=64 -g -D_REENTRANT -pipe -fPIC' [ 225s] + export 'LDFLAGS=-Wl,-z,relro,--as-needed,-O1,--hash-style=gnu -pie' [ 225s] + LDFLAGS='-Wl,-z,relro,--as-needed,-O1,--hash-style=gnu -pie' [ 225s] + autoreconf -fi [ 239s] libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build/autoconf'. [ 239s] libtoolize: copying file 'build/autoconf/ltmain.sh' [ 239s] libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'build/autoconf'. [ 239s] libtoolize: copying file 'build/autoconf/libtool.m4' [ 239s] libtoolize: copying file 'build/autoconf/ltoptions.m4' [ 240s] libtoolize: copying file 'build/autoconf/ltsugar.m4' [ 240s] libtoolize: copying file 'build/autoconf/ltversion.m4' [ 240s] libtoolize: copying file 'build/autoconf/lt~obsolete.m4' [ 270s] configure.ac:117: installing 'build/autoconf/compile' [ 270s] configure.ac:30: installing 'build/autoconf/missing' [ 271s] Makefile.am: installing 'build/autoconf/depcomp' [ 284s] + CFLAGS='-Os -fstack-protector -Wno-unused-command-line-argument -Wno-error=unused-but-set-variable -Wno-error=unused-command-line-argument -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -Wformat -Wformat-security -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -D_FILE_OFFSET_BITS=64 -g -D_REENTRANT -pipe -fPIC' [ 284s] + export CFLAGS [ 284s] + CXXFLAGS='-Os -fstack-protector -Wno-unused-command-line-argument -Wno-error=unused-but-set-variable -Wno-error=unused-command-line-argument -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -Wformat -Wformat-security -fmessage-length=0 -frecord-gcc-switches -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -D_FILE_OFFSET_BITS=64 -g -D_REENTRANT -pipe -fPIC' [ 284s] + export CXXFLAGS [ 284s] + LDFLAGS='-Wl,-z,relro,--as-needed,-O1,--hash-style=gnu -pie' [ 284s] + export LDFLAGS [ 284s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --enable-bsdcpio [ 285s] checking for a BSD-compatible install... /bin/install -c [ 285s] checking whether build environment is sane... yes [ 285s] checking for a race-free mkdir -p... /bin/mkdir -p [ 285s] checking for gawk... gawk [ 285s] checking whether make sets $(MAKE)... yes [ 285s] checking whether make supports nested variables... yes [ 285s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 285s] checking whether make supports nested variables... (cached) yes [ 285s] checking build system type... armv7l-tizen-linux-gnueabi [ 285s] checking host system type... armv7l-tizen-linux-gnueabi [ 285s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-clang [ 286s] checking whether the C compiler works... yes [ 286s] checking for C compiler default output file name... a.out [ 286s] checking for suffix of executables... [ 286s] checking whether we are cross compiling... no [ 286s] checking for suffix of object files... o [ 287s] checking whether the compiler supports GNU C... yes [ 287s] checking whether armv7l-tizen-linux-gnueabi-clang accepts -g... yes [ 287s] checking for armv7l-tizen-linux-gnueabi-clang option to enable C11 features... none needed [ 287s] checking whether armv7l-tizen-linux-gnueabi-clang understands -c and -o together... yes [ 287s] checking whether make supports the include directive... yes (GNU style) [ 287s] checking dependency style of armv7l-tizen-linux-gnueabi-clang... gcc3 [ 287s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-clang -E [ 288s] checking for stdio.h... yes [ 288s] checking for stdlib.h... yes [ 288s] checking for string.h... yes [ 288s] checking for inttypes.h... yes [ 288s] checking for stdint.h... yes [ 288s] checking for strings.h... yes [ 288s] checking for sys/stat.h... yes [ 288s] checking for sys/types.h... yes [ 288s] checking for unistd.h... yes [ 288s] checking for wchar.h... yes [ 289s] checking for minix/config.h... no [ 289s] checking for sys/time.h... yes [ 289s] checking whether it is safe to define __EXTENSIONS__... yes [ 289s] checking whether _XOPEN_SOURCE should be defined... no [ 289s] checking how to print strings... printf [ 289s] checking for a sed that does not truncate output... /bin/sed [ 289s] checking for grep that handles long lines and -e... /bin/grep [ 289s] checking for egrep... /bin/grep -E [ 289s] checking for fgrep... /bin/grep -F [ 289s] checking for ld used by armv7l-tizen-linux-gnueabi-clang... /usr/bin/ld [ 289s] checking if the linker (/usr/bin/ld) is GNU ld... yes [ 289s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 289s] checking the name lister (/bin/nm -B) interface... BSD nm [ 289s] checking whether ln -s works... yes [ 289s] checking the maximum length of command line arguments... 1572864 [ 289s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 289s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 289s] checking for /usr/bin/ld option to reload object files... -r [ 289s] checking for file... file [ 289s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 289s] checking for objdump... objdump [ 289s] checking how to recognize dependent libraries... pass_all [ 289s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 289s] checking for dlltool... no [ 289s] checking how to associate runtime and link libraries... printf %s\n [ 289s] checking for armv7l-tizen-linux-gnueabi-ranlib... llvm-ranlib [ 289s] checking for armv7l-tizen-linux-gnueabi-ar... llvm-ar [ 289s] checking for archiver @FILE support... @ [ 289s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 289s] checking for strip... strip [ 290s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-clang object... ok [ 290s] checking for sysroot... no [ 290s] checking for a working dd... /bin/dd [ 290s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 290s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 290s] checking for mt... no [ 290s] checking if : is a manifest tool... no [ 290s] checking for dlfcn.h... yes [ 290s] checking for objdir... .libs [ 291s] checking if armv7l-tizen-linux-gnueabi-clang supports -fno-rtti -fno-exceptions... yes [ 291s] checking for armv7l-tizen-linux-gnueabi-clang option to produce PIC... -fPIC -DPIC [ 291s] checking if armv7l-tizen-linux-gnueabi-clang PIC flag -fPIC -DPIC works... yes [ 291s] checking if armv7l-tizen-linux-gnueabi-clang static flag -static works... no [ 291s] checking if armv7l-tizen-linux-gnueabi-clang supports -c -o file.o... yes [ 291s] checking if armv7l-tizen-linux-gnueabi-clang supports -c -o file.o... (cached) yes [ 292s] checking whether the armv7l-tizen-linux-gnueabi-clang linker (/usr/bin/ld) supports shared libraries... yes [ 292s] checking whether -lc should be explicitly linked in... no [ 292s] checking dynamic linker characteristics... GNU/Linux ld.so [ 292s] checking how to hardcode library paths into programs... immediate [ 292s] checking whether stripping libraries is possible... yes [ 292s] checking if libtool supports shared libraries... yes [ 292s] checking whether to build shared libraries... yes [ 292s] checking whether to build static libraries... no [ 292s] checking for armv7l-tizen-linux-gnueabi-strip... strip [ 293s] checking for dirent.h that defines DIR... yes [ 293s] checking for library containing opendir... none required [ 293s] checking for sys/wait.h that is POSIX.1 compatible... yes [ 293s] checking for acl/libacl.h... yes [ 293s] checking for attr/xattr.h... no [ 294s] checking for copyfile.h... no [ 294s] checking for ctype.h... yes [ 294s] checking for errno.h... yes [ 294s] checking for ext2fs/ext2_fs.h... yes [ 294s] checking for fcntl.h... yes [ 295s] checking for fnmatch.h... yes [ 295s] checking for grp.h... yes [ 295s] checking whether EXT2_IOC_GETFLAGS is usable... yes [ 295s] checking for inttypes.h... (cached) yes [ 296s] checking for io.h... no [ 296s] checking for langinfo.h... yes [ 296s] checking for limits.h... yes [ 296s] checking for linux/fiemap.h... yes [ 296s] checking for linux/fs.h... yes [ 296s] checking for linux/magic.h... yes [ 297s] checking for linux/types.h... yes [ 297s] checking whether FS_IOC_GETFLAGS is usable... yes [ 297s] checking for locale.h... yes [ 297s] checking for membership.h... no [ 297s] checking for paths.h... yes [ 298s] checking for poll.h... yes [ 298s] checking for pthread.h... yes [ 298s] checking for pwd.h... yes [ 298s] checking for readpassphrase.h... no [ 298s] checking for signal.h... yes [ 299s] checking for spawn.h... yes [ 299s] checking for stdarg.h... yes [ 299s] checking for stdint.h... (cached) yes [ 299s] checking for stdlib.h... (cached) yes [ 299s] checking for string.h... (cached) yes [ 299s] checking for sys/acl.h... yes [ 300s] checking for sys/cdefs.h... yes [ 300s] checking for sys/ea.h... no [ 300s] checking for sys/extattr.h... no [ 300s] checking for sys/ioctl.h... yes [ 300s] checking for sys/mkdev.h... no [ 301s] checking for sys/mount.h... yes [ 301s] checking for sys/param.h... yes [ 301s] checking for sys/poll.h... yes [ 301s] checking for sys/richacl.h... no [ 301s] checking for sys/select.h... yes [ 302s] checking for sys/statfs.h... yes [ 302s] checking for sys/statvfs.h... yes [ 302s] checking for sys/sysmacros.h... yes [ 302s] checking for sys/time.h... (cached) yes [ 302s] checking for sys/utime.h... no [ 302s] checking for sys/utsname.h... yes [ 303s] checking for sys/vfs.h... yes [ 303s] checking for sys/xattr.h... yes [ 303s] checking for time.h... yes [ 303s] checking for unistd.h... (cached) yes [ 303s] checking for utime.h... yes [ 303s] checking for wchar.h... (cached) yes [ 303s] checking for wctype.h... yes [ 304s] checking for suseconds_t... yes [ 304s] checking for windows.h... no [ 304s] checking for wincrypt.h... no [ 304s] checking for winioctl.h... no [ 305s] found a suitable version of zlib (>= 1.2.1) [ 305s] checking for bzlib.h... yes [ 305s] checking for BZ2_bzDecompressInit in -lbz2... yes [ 305s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 305s] checking pkg-config is at least version 0.9.0... yes [ 305s] checking for blake2.h... no [ 306s] checking for blake2sp_init in -lb2... no [ 306s] Package libb2 was not found in the pkg-config search path. [ 306s] Perhaps you should add the directory containing `libb2.pc' [ 306s] to the PKG_CONFIG_PATH environment variable [ 306s] No package 'libb2' found [ 306s] checking for ld used by GCC... /usr/bin/ld [ 306s] checking if the linker (/usr/bin/ld) is GNU ld... yes [ 306s] checking for shared library run path origin... done [ 306s] checking for iconv... yes [ 307s] checking for working iconv... yes [ 307s] checking for iconv declaration... [ 307s] extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); [ 307s] checking for iconv.h... yes [ 307s] checking for localcharset.h... no [ 307s] checking for locale_charset... no [ 307s] checking for locale_charset in -lcharset... no [ 307s] checking for lz4.h... no [ 308s] checking for lz4hc.h... no [ 308s] checking for LZ4_decompress_safe in -llz4... no [ 308s] checking for zstd.h... no [ 308s] checking for ZSTD_decompressStream in -lzstd... no [ 308s] checking for ZSTD_compressStream in -lzstd... no [ 309s] checking for ZSTD_minCLevel in -lzstd... no [ 309s] checking for armv7l-tizen-linux-gnueabi-pkg-config... (cached) /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 309s] checking pkg-config is at least version 0.9.0... yes [ 309s] checking for liblzma... yes [ 309s] checking for lzma.h... yes [ 309s] checking whether we have multithread support in lzma... yes [ 309s] checking for armv7l-tizen-linux-gnueabi-pkg-config... (cached) /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 309s] checking pkg-config is at least version 0.9.0... yes [ 310s] checking for libxml-2.0... yes [ 310s] checking for xmlInitParser in -lxml2... yes [ 310s] checking for libxml/xmlreader.h... yes [ 310s] checking for libxml/xmlwriter.h... yes [ 310s] checking for libxml/xmlversion.h... yes [ 310s] checking for regex.h... yes [ 311s] checking for regcomp... yes [ 311s] checking whether C compiler accepts -Wall... yes [ 311s] checking whether C compiler accepts -Wformat... yes [ 311s] checking whether C compiler accepts -Wformat-security... yes [ 311s] checking whether ld supports --gc-sections... yes [ 311s] checking whether C compiler accepts -ffunction-sections... yes [ 311s] checking whether C compiler accepts -fdata-sections... yes [ 311s] checking for an ANSI C-conforming const... yes [ 311s] checking for uid_t in sys/types.h... yes [ 311s] checking for mode_t... yes [ 312s] checking for off_t... yes [ 312s] checking for size_t... yes [ 312s] checking for id_t... yes [ 312s] checking for uintptr_t... yes [ 312s] checking for struct tm.tm_gmtoff... yes [ 313s] checking for struct tm.__tm_gmtoff... no [ 313s] checking for struct statfs.f_namemax... no [ 313s] checking for struct statfs.f_iosize... no [ 313s] checking for struct statvfs.f_iosize... no [ 313s] checking for struct stat.st_birthtime... no [ 314s] checking for struct stat.st_birthtimespec.tv_nsec... no [ 314s] checking for struct stat.st_mtimespec.tv_nsec... no [ 314s] checking for struct stat.st_mtim.tv_nsec... yes [ 314s] checking for struct stat.st_mtime_n... no [ 314s] checking for struct stat.st_umtime... no [ 314s] checking for struct stat.st_mtime_usec... no [ 314s] checking for struct stat.st_blksize... yes [ 315s] checking for struct stat.st_flags... no [ 315s] checking for uintmax_t... yes [ 315s] checking for unsigned long long... yes [ 315s] checking for unsigned long long int... yes [ 315s] checking for long long int... yes [ 315s] checking for intmax_t... yes [ 315s] checking for uintmax_t... (cached) yes [ 316s] checking for int64_t... yes [ 316s] checking for uint64_t... yes [ 316s] checking for int32_t... yes [ 316s] checking for uint32_t... yes [ 317s] checking for int16_t... yes [ 317s] checking for uint16_t... yes [ 317s] checking for uint8_t... yes [ 317s] checking for armv7l-tizen-linux-gnueabi-clang options needed to detect all undeclared functions... none needed [ 317s] checking whether SIZE_MAX is declared... yes [ 317s] checking whether INT32_MAX is declared... yes [ 317s] checking whether INT32_MIN is declared... yes [ 317s] checking whether INT64_MAX is declared... yes [ 317s] checking whether INT64_MIN is declared... yes [ 317s] checking whether UINT64_MAX is declared... yes [ 317s] checking whether UINT32_MAX is declared... yes [ 317s] checking whether INTMAX_MAX is declared... yes [ 318s] checking whether INTMAX_MIN is declared... yes [ 318s] checking whether UINTMAX_MAX is declared... yes [ 318s] checking whether SSIZE_MAX is declared... yes [ 318s] checking whether EFTYPE is declared... no [ 318s] checking whether EILSEQ is declared... yes [ 318s] checking for wchar_t... yes [ 318s] checking size of wchar_t... 4 [ 318s] checking size of int... 4 [ 318s] checking size of long... 4 [ 318s] checking for sys/mkdev.h... (cached) no [ 318s] checking for sys/sysmacros.h... (cached) yes [ 318s] checking for _LARGEFILE_SOURCE value needed for large files... no [ 318s] checking for working memcmp... yes [ 319s] checking whether lstat correctly handles trailing slash... yes [ 319s] checking whether lstat accepts an empty string... no [ 319s] checking whether stat accepts an empty string... no [ 319s] checking whether strerror_r is declared... yes [ 319s] checking whether strerror_r returns char *... yes [ 319s] checking for strftime... yes [ 320s] checking for vprintf... yes [ 320s] checking for CreateHardLinkA... no [ 320s] checking for arc4random_buf... yes [ 320s] checking for chflags... no [ 320s] checking for chown... yes [ 320s] checking for chroot... yes [ 320s] checking for ctime_r... yes [ 320s] checking for fchdir... yes [ 320s] checking for fchflags... no [ 320s] checking for fchmod... yes [ 320s] checking for fchown... yes [ 321s] checking for fcntl... yes [ 321s] checking for fdopendir... yes [ 321s] checking for fnmatch... yes [ 321s] checking for fork... yes [ 321s] checking for fstat... yes [ 321s] checking for fstatat... yes [ 321s] checking for fstatfs... yes [ 321s] checking for fstatvfs... yes [ 322s] checking for ftruncate... yes [ 322s] checking for futimens... yes [ 322s] checking for futimes... yes [ 322s] checking for futimesat... yes [ 322s] checking for geteuid... yes [ 322s] checking for getline... yes [ 322s] checking for getpid... yes [ 323s] checking for getgrgid_r... yes [ 323s] checking for getgrnam_r... yes [ 323s] checking for getpwnam_r... yes [ 323s] checking for getpwuid_r... yes [ 323s] checking for getvfsbyname... no [ 323s] checking for gmtime_r... yes [ 323s] checking for lchflags... no [ 324s] checking for lchmod... yes [ 324s] checking for lchown... yes [ 324s] checking for link... yes [ 324s] checking for linkat... yes [ 324s] checking for localtime_r... yes [ 324s] checking for lstat... yes [ 324s] checking for lutimes... yes [ 324s] checking for mbrtowc... yes [ 324s] checking for memmove... yes [ 324s] checking for memset... yes [ 325s] checking for mkdir... yes [ 325s] checking for mkfifo... yes [ 325s] checking for mknod... yes [ 325s] checking for mkstemp... yes [ 325s] checking for nl_langinfo... yes [ 325s] checking for openat... yes [ 325s] checking for pipe... yes [ 325s] checking for poll... yes [ 325s] checking for posix_spawnp... yes [ 325s] checking for readlink... yes [ 326s] checking for readlinkat... yes [ 326s] checking for readpassphrase... no [ 326s] checking for select... yes [ 326s] checking for setenv... yes [ 326s] checking for setlocale... yes [ 326s] checking for sigaction... yes [ 326s] checking for statfs... yes [ 326s] checking for statvfs... yes [ 326s] checking for strchr... yes [ 326s] checking for strdup... yes [ 327s] checking for strerror... yes [ 327s] checking for strncpy_s... no [ 327s] checking for strnlen... yes [ 327s] checking for strrchr... yes [ 327s] checking for symlink... yes [ 327s] checking for sysconf... yes [ 327s] checking for tcgetattr... yes [ 327s] checking for tcsetattr... yes [ 327s] checking for timegm... yes [ 327s] checking for tzset... yes [ 327s] checking for unlinkat... yes [ 327s] checking for unsetenv... yes [ 328s] checking for utime... yes [ 328s] checking for utimensat... yes [ 328s] checking for utimes... yes [ 328s] checking for vfork... yes [ 328s] checking for wcrtomb... yes [ 328s] checking for wcscmp... yes [ 328s] checking for wcscpy... yes [ 329s] checking for wcslen... yes [ 329s] checking for wctomb... yes [ 329s] checking for wmemcmp... yes [ 329s] checking for wmemcpy... yes [ 329s] checking for wmemmove... yes [ 329s] checking for _fseeki64... no [ 329s] checking for _get_timezone... no [ 329s] checking whether cmtime_s is declared... no [ 329s] checking whether gmtime_s is declared... no [ 329s] checking for localtime_s... no [ 329s] checking whether _mkgmtime is declared... no [ 330s] checking for cygwin_conv_path... no [ 330s] checking for struct vfsconf... no [ 330s] checking for struct xvfsconf... no [ 330s] checking for struct statfs... no [ 330s] checking whether D_MD_ORDER is declared... no [ 330s] checking for struct dirent.d_namlen... no [ 331s] checking for library containing setxattr... none required [ 331s] checking whether EXTATTR_NAMESPACE_USER is declared... no [ 331s] checking whether XATTR_NOFOLLOW is declared... no [ 331s] checking for fgetxattr... yes [ 331s] checking for flistxattr... yes [ 331s] checking for fsetxattr... yes [ 331s] checking for getxattr... yes [ 331s] checking for lgetxattr... yes [ 331s] checking for listxattr... yes [ 332s] checking for llistxattr... yes [ 332s] checking for lsetxattr... yes [ 332s] checking for extended attributes support... Linux [ 332s] checking for acl_get_file in -lacl... yes [ 332s] checking for acl_t... yes [ 332s] checking for acl_entry_t... yes [ 332s] checking for acl_permset_t... yes [ 332s] checking for acl_tag_t... yes [ 332s] checking for richacl_get_file in -lrichacl... no [ 332s] Package librichacl was not found in the pkg-config search path. [ 332s] Perhaps you should add the directory containing `librichacl.pc' [ 332s] to the PKG_CONFIG_PATH environment variable [ 332s] No package 'librichacl' found [ 332s] checking for struct richace... no [ 332s] checking for struct richacl... no [ 333s] checking for acl... no [ 333s] checking for facl... no [ 333s] checking for acl_add_perm... yes [ 333s] checking for acl_clear_perms... yes [ 333s] checking for acl_create_entry... yes [ 333s] checking for acl_delete_def_file... yes [ 334s] checking for acl_free... yes [ 334s] checking for acl_get_entry... yes [ 334s] checking for acl_get_fd... yes [ 334s] checking for acl_get_file... yes [ 334s] checking for acl_get_permset... yes [ 335s] checking for acl_get_qualifier... yes [ 335s] checking for acl_get_tag_type... yes [ 335s] checking for acl_init... yes [ 335s] checking for acl_set_fd... yes [ 335s] checking for acl_set_file... yes [ 335s] checking for acl_set_qualifier... yes [ 335s] checking for acl_set_tag_type... yes [ 335s] checking for acl_get_perm... yes [ 335s] checking for ACL support... libacl (POSIX.1e) [ 335s] checking for special C compiler options needed for large files... no [ 335s] checking for _FILE_OFFSET_BITS value needed for large files... no [ 336s] checking support for ARCHIVE_CRYPTO_MD5_LIBC... no [ 336s] checking support for ARCHIVE_CRYPTO_MD5_LIBSYSTEM... no [ 336s] checking support for ARCHIVE_CRYPTO_RMD160_LIBC... no [ 336s] checking support for ARCHIVE_CRYPTO_SHA1_LIBC... no [ 336s] checking support for ARCHIVE_CRYPTO_SHA1_LIBSYSTEM... no [ 337s] checking support for ARCHIVE_CRYPTO_SHA256_LIBC... no [ 337s] checking support for ARCHIVE_CRYPTO_SHA256_LIBC2... no [ 337s] checking support for ARCHIVE_CRYPTO_SHA256_LIBC3... no [ 337s] checking support for ARCHIVE_CRYPTO_SHA256_LIBSYSTEM... no [ 337s] checking support for ARCHIVE_CRYPTO_SHA384_LIBC... no [ 337s] checking support for ARCHIVE_CRYPTO_SHA384_LIBC2... no [ 338s] checking support for ARCHIVE_CRYPTO_SHA384_LIBC3... no [ 338s] checking support for ARCHIVE_CRYPTO_SHA384_LIBSYSTEM... no [ 338s] checking support for ARCHIVE_CRYPTO_SHA512_LIBC... no [ 338s] checking support for ARCHIVE_CRYPTO_SHA512_LIBC2... no [ 339s] checking support for ARCHIVE_CRYPTO_SHA512_LIBC3... no [ 339s] checking support for ARCHIVE_CRYPTO_SHA512_LIBSYSTEM... no [ 339s] checking for bcrypt.h... no [ 339s] checking for openssl/evp.h... yes [ 339s] checking for openssl/opensslv.h... yes [ 340s] checking for OPENSSL_config in -lcrypto... yes [ 340s] checking support for ARCHIVE_CRYPTO_MD5_OPENSSL... yes [ 340s] checking support for ARCHIVE_CRYPTO_RMD160_OPENSSL... no [ 341s] checking support for ARCHIVE_CRYPTO_SHA1_OPENSSL... yes [ 342s] checking support for ARCHIVE_CRYPTO_SHA256_OPENSSL... yes [ 342s] checking support for ARCHIVE_CRYPTO_SHA384_OPENSSL... yes [ 344s] checking support for ARCHIVE_CRYPTO_SHA512_OPENSSL... yes [ 344s] checking for PKCS5_PBKDF2_HMAC_SHA1... yes [ 344s] checking for md5.h... no [ 344s] checking for ripemd.h... no [ 344s] checking for sha.h... no [ 344s] checking for sha256.h... no [ 345s] checking for sha512.h... no [ 345s] checking for MD5Init in -lmd... no [ 346s] checking support for ARCHIVE_CRYPTO_RMD160_LIBMD... no [ 346s] checking whether compiler supports visibility annotations... yes [ 346s] checking that generated files are newer than configure... done [ 346s] configure: creating ./config.status [ 347s] config.status: creating Makefile [ 347s] config.status: creating build/pkgconfig/libarchive.pc [ 347s] config.status: creating config.h [ 347s] config.status: executing depfiles commands [ 352s] config.status: executing libtool commands [ 352s] config.status: executing mkdirs commands [ 352s] + /bin/make -j12 [ 352s] /bin/mkdir -p libarchive/test [ 352s] /bin/mkdir -p tar/test [ 352s] /bin/mkdir -p cpio/test [ 352s] /bin/mkdir -p cat/test [ 352s] /bin/mkdir -p unzip/test [ 352s] cat ./libarchive/test/test_*.c | grep '^DEFINE_TEST' > libarchive/test/list.h [ 352s] cat ./tar/test/test_*.c | grep '^DEFINE_TEST' > tar/test/list.h [ 352s] cat ./cpio/test/test_*.c | grep '^DEFINE_TEST' > cpio/test/list.h [ 352s] cat ./cat/test/test_*.c | grep '^DEFINE_TEST' > cat/test/list.h [ 352s] cat ./unzip/test/test_*.c | grep '^DEFINE_TEST' > unzip/test/list.h [ 352s] /bin/make all-am [ 352s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libarchive-3.8.1' [ 352s] CC tar/bsdtar-bsdtar.o [ 352s] CC tar/bsdtar-creation_set.o [ 352s] CC tar/bsdtar-cmdline.o [ 352s] CC tar/bsdtar-read.o [ 352s] CC tar/bsdtar-subst.o [ 352s] CC tar/bsdtar-util.o [ 352s] CC tar/bsdtar-write.o [ 352s] CC libarchive/archive_acl.lo [ 352s] CC libarchive/archive_check_magic.lo [ 352s] CC libarchive/archive_cmdline.lo [ 352s] CC libarchive/archive_cryptor.lo [ 352s] CC libarchive/archive_digest.lo [ 352s] CC libarchive/archive_entry.lo [ 352s] CC libarchive/archive_entry_copy_stat.lo [ 352s] CC libarchive/archive_entry_link_resolver.lo [ 352s] CC libarchive/archive_entry_sparse.lo [ 352s] CC libarchive/archive_entry_stat.lo [ 352s] CC libarchive/archive_entry_strmode.lo [ 352s] CC libarchive/archive_entry_xattr.lo [ 352s] CC libarchive/archive_hmac.lo [ 352s] CC libarchive/archive_match.lo [ 352s] CC libarchive/archive_options.lo [ 352s] CC libarchive/archive_pack_dev.lo [ 352s] CC libarchive/archive_parse_date.lo [ 352s] CC libarchive/archive_pathmatch.lo [ 352s] CC libarchive/archive_ppmd7.lo [ 352s] CC libarchive/archive_ppmd8.lo [ 352s] CC libarchive/archive_random.lo [ 352s] CC libarchive/archive_rb.lo [ 353s] CC libarchive/archive_read.lo [ 353s] CC libarchive/archive_read_add_passphrase.lo [ 353s] CC libarchive/archive_read_append_filter.lo [ 353s] CC libarchive/archive_read_data_into_fd.lo [ 353s] CC libarchive/archive_read_disk_entry_from_file.lo [ 353s] CC libarchive/archive_read_disk_posix.lo [ 353s] CC libarchive/archive_read_disk_set_standard_lookup.lo [ 353s] CC libarchive/archive_read_extract.lo [ 353s] CC libarchive/archive_read_extract2.lo [ 353s] CC libarchive/archive_read_open_fd.lo [ 353s] CC libarchive/archive_read_open_file.lo [ 353s] CC libarchive/archive_read_open_filename.lo [ 353s] CC libarchive/archive_read_open_memory.lo [ 353s] CC libarchive/archive_read_set_format.lo [ 353s] CC libarchive/archive_read_set_options.lo [ 353s] CC libarchive/archive_read_support_filter_all.lo [ 353s] CC libarchive/archive_read_support_filter_bzip2.lo [ 353s] CC libarchive/archive_read_support_filter_by_code.lo [ 353s] CC libarchive/archive_read_support_filter_compress.lo [ 353s] CC libarchive/archive_read_support_filter_grzip.lo [ 353s] CC libarchive/archive_read_support_filter_gzip.lo [ 353s] CC libarchive/archive_read_support_filter_lrzip.lo [ 353s] CC libarchive/archive_read_support_filter_lz4.lo [ 353s] CC libarchive/archive_read_support_filter_none.lo [ 353s] CC libarchive/archive_read_support_filter_lzop.lo [ 353s] CC libarchive/archive_read_support_filter_program.lo [ 353s] CC libarchive/archive_read_support_filter_rpm.lo [ 353s] CC libarchive/archive_read_support_filter_uu.lo [ 353s] CC libarchive/archive_read_support_filter_xz.lo [ 353s] CC libarchive/archive_read_support_filter_zstd.lo [ 353s] CC libarchive/archive_read_support_format_7zip.lo [ 353s] CC libarchive/archive_read_support_format_all.lo [ 353s] CC libarchive/archive_read_support_format_ar.lo [ 353s] CC libarchive/archive_read_support_format_by_code.lo [ 353s] CC libarchive/archive_read_support_format_cab.lo [ 353s] CC libarchive/archive_read_support_format_cpio.lo [ 353s] CC libarchive/archive_read_support_format_empty.lo [ 354s] CC libarchive/archive_read_support_format_iso9660.lo [ 354s] CC libarchive/archive_read_support_format_lha.lo [ 354s] CC libarchive/archive_read_support_format_mtree.lo [ 354s] CC libarchive/archive_read_support_format_rar.lo [ 354s] CC libarchive/archive_read_support_format_rar5.lo [ 354s] CC libarchive/archive_read_support_format_raw.lo [ 354s] CC libarchive/archive_read_support_format_tar.lo [ 354s] CC libarchive/archive_read_support_format_warc.lo [ 354s] CC libarchive/archive_read_support_format_xar.lo [ 354s] CC libarchive/archive_read_support_format_zip.lo [ 354s] CC libarchive/archive_string.lo [ 354s] CC libarchive/archive_string_sprintf.lo [ 354s] CC libarchive/archive_time.lo [ 354s] CC libarchive/archive_util.lo [ 354s] CC libarchive/archive_version_details.lo [ 354s] CC libarchive/archive_virtual.lo [ 354s] CC libarchive/archive_write.lo [ 354s] CC libarchive/archive_write_disk_posix.lo [ 354s] CC libarchive/archive_write_disk_set_standard_lookup.lo [ 354s] CC libarchive/archive_write_open_fd.lo [ 354s] CC libarchive/archive_write_open_file.lo [ 354s] CC libarchive/archive_write_open_filename.lo [ 354s] CC libarchive/archive_write_open_memory.lo [ 354s] CC libarchive/archive_write_add_filter.lo [ 355s] CC libarchive/archive_write_add_filter_b64encode.lo [ 355s] CC libarchive/archive_write_add_filter_by_name.lo [ 355s] CC libarchive/archive_write_add_filter_bzip2.lo [ 355s] CC libarchive/archive_write_add_filter_compress.lo [ 355s] CC libarchive/archive_write_add_filter_grzip.lo [ 355s] CC libarchive/archive_write_add_filter_gzip.lo [ 355s] CC libarchive/archive_write_add_filter_lrzip.lo [ 355s] CC libarchive/archive_write_add_filter_lz4.lo [ 355s] CC libarchive/archive_write_add_filter_lzop.lo [ 355s] CC libarchive/archive_write_add_filter_none.lo [ 355s] CC libarchive/archive_write_add_filter_program.lo [ 355s] CC libarchive/archive_write_add_filter_uuencode.lo [ 355s] CC libarchive/archive_write_add_filter_xz.lo [ 355s] CC libarchive/archive_write_add_filter_zstd.lo [ 355s] CC libarchive/archive_write_set_format.lo [ 355s] CC libarchive/archive_write_set_format_7zip.lo [ 355s] CC libarchive/archive_write_set_format_ar.lo [ 355s] CC libarchive/archive_write_set_format_by_name.lo [ 355s] CC libarchive/archive_write_set_format_cpio.lo [ 355s] CC libarchive/archive_write_set_format_cpio_binary.lo [ 355s] CC libarchive/archive_write_set_format_cpio_newc.lo [ 355s] CC libarchive/archive_write_set_format_cpio_odc.lo [ 355s] CC libarchive/archive_write_set_format_filter_by_ext.lo [ 355s] CC libarchive/archive_write_set_format_iso9660.lo [ 355s] CC libarchive/archive_write_set_format_mtree.lo [ 355s] CC libarchive/archive_write_set_format_pax.lo [ 355s] CC libarchive/archive_write_set_format_raw.lo [ 355s] CC libarchive/archive_write_set_format_shar.lo [ 355s] CC libarchive/archive_write_set_format_ustar.lo [ 355s] CC libarchive/archive_write_set_format_v7tar.lo [ 355s] CC libarchive/archive_write_set_format_gnutar.lo [ 355s] CC libarchive/archive_write_set_format_warc.lo [ 355s] CC libarchive/archive_write_set_format_xar.lo [ 355s] CC libarchive/archive_write_set_format_zip.lo [ 355s] CC libarchive/archive_write_set_options.lo [ 355s] CC libarchive/archive_write_set_passphrase.lo [ 355s] CC libarchive/filter_fork_posix.lo [ 355s] CC libarchive/xxhash.lo [ 355s] CC libarchive/archive_blake2s_ref.lo [ 355s] libarchive/archive_write_set_format_xar.c:3421:31: warning: 'content' is deprecated [-Wdeprecated-declarations] [ 355s] 3421 | *out = (const char*)ctx->bp->content; [ 355s] | ^ [ 355s] /usr/include/libxml2/libxml/tree.h:115:22: note: 'content' has been explicitly marked deprecated here [ 355s] 115 | xmlChar *content XML_DEPRECATED_MEMBER; [ 355s] | ^ [ 355s] /usr/include/libxml2/libxml/xmlexports.h:76:50: note: expanded from macro 'XML_DEPRECATED_MEMBER' [ 355s] 76 | #define XML_DEPRECATED_MEMBER __attribute__((deprecated)) [ 355s] | ^ [ 355s] libarchive/archive_write_set_format_xar.c:3422:27: warning: 'use' is deprecated [-Wdeprecated-declarations] [ 355s] 3422 | *size = (size_t)ctx->bp->use; [ 355s] | ^ [ 355s] /usr/include/libxml2/libxml/tree.h:121:22: note: 'use' has been explicitly marked deprecated here [ 355s] 121 | unsigned int use XML_DEPRECATED_MEMBER; [ 355s] | ^ [ 355s] /usr/include/libxml2/libxml/xmlexports.h:76:50: note: expanded from macro 'XML_DEPRECATED_MEMBER' [ 355s] 76 | #define XML_DEPRECATED_MEMBER __attribute__((deprecated)) [ 355s] | ^ [ 355s] CC libarchive/archive_blake2sp_ref.lo [ 355s] CC libarchive/archive_disk_acl_linux.lo [ 355s] CC libarchive_fe/la-err.lo [ 355s] CC libarchive_fe/la-line_reader.lo [ 355s] CC libarchive_fe/la-passphrase.lo [ 355s] CC cpio/bsdcpio-cmdline.o [ 355s] CC cpio/bsdcpio-cpio.o [ 356s] CC cat/bsdcat-bsdcat.o [ 356s] CC cat/bsdcat-cmdline.o [ 356s] CC unzip/bsdunzip-bsdunzip.o [ 356s] CC unzip/bsdunzip-cmdline.o [ 356s] CC unzip/bsdunzip-la_getline.o [ 356s] CCLD libarchive_fe.la [ 356s] 2 warnings generated. [ 356s] CCLD libarchive.la [ 357s] CCLD bsdtar [ 357s] CCLD bsdcpio [ 357s] CCLD bsdcat [ 357s] CCLD bsdunzip [ 357s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libarchive-3.8.1' [ 357s] + exit 0 [ 357s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.hlNetR [ 357s] + umask 022 [ 357s] + cd /home/abuild/rpmbuild/BUILD [ 357s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm [ 357s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm [ 357s] + cd libarchive-3.8.1 [ 357s] + export AR=llvm-ar RANLIB=llvm-ranlib [ 357s] + AR=llvm-ar [ 357s] + RANLIB=llvm-ranlib [ 357s] + export CC=armv7l-tizen-linux-gnueabi-clang CXX=armv7l-tizen-linux-gnueabi-clang++ [ 357s] + CC=armv7l-tizen-linux-gnueabi-clang [ 357s] + CXX=armv7l-tizen-linux-gnueabi-clang++ [ 357s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm install [ 357s] /bin/make install-am [ 357s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libarchive-3.8.1' [ 357s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libarchive-3.8.1' [ 357s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/lib' [ 357s] /bin/sh ./libtool --mode=install /bin/install -c libarchive.la '/home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/lib' [ 357s] libtool: install: /bin/install -c .libs/libarchive.so.13.8.1 /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/lib/libarchive.so.13.8.1 [ 357s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/lib && { ln -s -f libarchive.so.13.8.1 libarchive.so.13 || { rm -f libarchive.so.13 && ln -s libarchive.so.13.8.1 libarchive.so.13; }; }) [ 357s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/lib && { ln -s -f libarchive.so.13.8.1 libarchive.so || { rm -f libarchive.so && ln -s libarchive.so.13.8.1 libarchive.so; }; }) [ 357s] libtool: install: /bin/install -c .libs/libarchive.lai /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/lib/libarchive.la [ 358s] libtool: warning: remember to run 'libtool --finish /usr/lib' [ 358s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/bin' [ 358s] /bin/sh ./libtool --mode=install /bin/install -c bsdtar bsdcpio bsdcat bsdunzip '/home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/bin' [ 358s] libtool: warning: 'libarchive.la' has not been installed in '/usr/lib' [ 358s] libtool: install: /bin/install -c .libs/bsdtar /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/bin/bsdtar [ 358s] libtool: warning: 'libarchive.la' has not been installed in '/usr/lib' [ 358s] libtool: install: /bin/install -c .libs/bsdcpio /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/bin/bsdcpio [ 358s] libtool: warning: 'libarchive.la' has not been installed in '/usr/lib' [ 358s] libtool: install: /bin/install -c .libs/bsdcat /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/bin/bsdcat [ 358s] libtool: warning: 'libarchive.la' has not been installed in '/usr/lib' [ 358s] libtool: install: /bin/install -c .libs/bsdunzip /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/bin/bsdunzip [ 358s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/include' [ 358s] /bin/install -c -m 644 libarchive/archive.h libarchive/archive_entry.h '/home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/include' [ 358s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/lib/pkgconfig' [ 358s] /bin/install -c -m 644 build/pkgconfig/libarchive.pc '/home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/lib/pkgconfig' [ 358s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libarchive-3.8.1' [ 358s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libarchive-3.8.1' [ 358s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/share/info/dir [ 358s] + find /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm -regex '.*\.la$' [ 358s] + xargs rm -f -- [ 358s] + find /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm -regex '.*\.a$' [ 358s] + xargs rm -f -- [ 358s] + find /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm -name cpio.5 -exec rm -f '{}' ';' [ 358s] + find /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm -name mtree.5 -exec rm -f '{}' ';' [ 358s] + find /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm -name tar.5 -exec rm -f '{}' ';' [ 358s] + ln -sf bsdtar /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/bin/tar [ 358s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 3.8.1-1.4 --unique-debug-src-base libarchive-3.8.1-1.4.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/libarchive-3.8.1 [ 359s] 1+0 records in [ 359s] 1+0 records out [ 359s] 1+0 records in [ 359s] 1+0 records out [ 359s] 1+0 records in [ 359s] 1+0 records out [ 359s] 1+0 records in [ 359s] 1+0 records out [ 359s] 1+0 records in [ 359s] 1+0 records out [ 359s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/bin/bsdcpio [ 359s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/bin/bsdtar [ 359s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/lib/libarchive.so.13.8.1 [ 359s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/bin/bsdcat [ 359s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/bin/bsdunzip [ 359s] *** WARNING: No build ID note found in /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/bin/bsdcpio [ 359s] *** WARNING: No build ID note found in /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/bin/bsdtar [ 359s] *** WARNING: No build ID note found in /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/bin/bsdcat [ 359s] *** WARNING: No build ID note found in /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/bin/bsdunzip [ 359s] *** WARNING: No build ID note found in /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/lib/libarchive.so.13.8.1 [ 359s] 0+0 records in [ 359s] 0+0 records out [ 359s] 0+0 records in [ 359s] 0+0 records out [ 359s] 0+0 records in [ 359s] 0+0 records out [ 359s] 0+0 records in [ 359s] 0+0 records out [ 359s] 0+0 records in [ 359s] 0+0 records out [ 359s] 7161 blocks [ 359s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libarchive-3.8.1/libarchive-debuginfo.manifest [ 359s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libarchive-3.8.1/libarchive-debugsource.manifest [ 359s] + /usr/lib/rpm/check-buildroot [ 359s] + /usr/lib/rpm//brp-compress [ 359s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 360s] + /usr/lib/rpm/brp-python-hardlink [ 360s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm [ 360s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/libarchive-3.8.1/isu.list [ 360s] ~/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm ~/rpmbuild/BUILD/libarchive-3.8.1 [ 360s] ~/rpmbuild/BUILD/libarchive-3.8.1 [ 360s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh /home/abuild/rpmbuild/SOURCES /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm arm [ 360s] Package: libarchive, Group: System/Libraries [ 360s] ########################################################################################## [ 360s] # SUCCESS: hal-rootstrap-checker done # [ 360s] ########################################################################################## [ 360s] + /etc/app-rootstrap/app-rootstrap-checker.sh /home/abuild/rpmbuild/SOURCES /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm arm [ 360s] Package: libarchive, Group: System/Libraries [ 360s] # NOTICE: Config app-rootstrap-checker.yaml skipped # [ 360s] # NOTICE: Config web-plugin-rootstrap-checker.yaml skipped # [ 360s] ########################################################################################## [ 360s] # SUCCESS: app-rootstrap-checker done # [ 360s] ########################################################################################## [ 360s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.cpPZCL [ 360s] + umask 022 [ 360s] + cd /home/abuild/rpmbuild/BUILD [ 360s] + cd libarchive-3.8.1 [ 360s] + exit 0 [ 360s] Processing files: libarchive-3.8.1-1.4.armv7l [ 360s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 360s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 360s] [ 360s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.74ni22 [ 360s] + umask 022 [ 360s] + cd /home/abuild/rpmbuild/BUILD [ 360s] + cd libarchive-3.8.1 [ 360s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/share/licenses/libarchive [ 360s] + export LC_ALL=C [ 360s] + LC_ALL=C [ 360s] + export LICENSEDIR [ 360s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/share/licenses/libarchive [ 360s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/share/licenses/libarchive [ 360s] + exit 0 [ 360s] warning: Missing build-id in /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/lib/libarchive.so.13.8.1 [ 360s] Provides: libarchive = 3.8.1-1.4 libarchive(armv7l-32) = 3.8.1-1.4 libarchive.so.13 [ 360s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 360s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 360s] Requires(post): /sbin/ldconfig [ 360s] Requires(postun): /sbin/ldconfig [ 360s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libacl.so.1 libacl.so.1(ACL_1.0) libbz2.so.1 libc.so.6 libc.so.6(GLIBC_2.15) libc.so.6(GLIBC_2.16) libc.so.6(GLIBC_2.28) libc.so.6(GLIBC_2.33) libc.so.6(GLIBC_2.36) libc.so.6(GLIBC_2.38) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.6) libc.so.6(GLIBC_2.7) libcrypto.so.3 libcrypto.so.3(OPENSSL_3.0.0) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) liblzma.so.5 liblzma.so.5(XZ_5.0) liblzma.so.5(XZ_5.2) libxml2.so.16 libz.so.1 rtld(GNU_HASH) [ 360s] Processing files: libarchive-debugsource-3.8.1-1.4.armv7l [ 360s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 360s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 360s] [ 361s] Provides: libarchive-debugsource = 3.8.1-1.4 libarchive-debugsource(armv7l-32) = 3.8.1-1.4 [ 361s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 361s] Processing files: libarchive-tools-3.8.1-1.4.armv7l [ 361s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 361s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 361s] [ 361s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.Vh6BKe [ 361s] + umask 022 [ 361s] + cd /home/abuild/rpmbuild/BUILD [ 361s] + cd libarchive-3.8.1 [ 361s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/share/licenses/libarchive-tools [ 361s] + export LC_ALL=C [ 361s] + LC_ALL=C [ 361s] + export LICENSEDIR [ 361s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/share/licenses/libarchive-tools [ 361s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/share/licenses/libarchive-tools [ 361s] + exit 0 [ 361s] warning: Missing build-id in /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/bin/bsdcpio [ 361s] warning: Missing build-id in /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/bin/bsdtar [ 361s] warning: Missing build-id in /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/bin/bsdcat [ 361s] warning: Missing build-id in /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/bin/bsdunzip [ 361s] Provides: libarchive-tools = 3.8.1-1.4 libarchive-tools(armv7l-32) = 3.8.1-1.4 [ 361s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 361s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libarchive.so.13 libc.so.6 libc.so.6(GLIBC_2.33) libc.so.6(GLIBC_2.34) libc.so.6(GLIBC_2.38) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.6) libc.so.6(GLIBC_2.7) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) rtld(GNU_HASH) [ 361s] Processing files: libarchive-devel-3.8.1-1.4.armv7l [ 361s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 361s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 361s] [ 361s] Provides: libarchive-devel = 3.8.1-1.4 libarchive-devel(armv7l-32) = 3.8.1-1.4 pkgconfig(libarchive) = 3.8.1 [ 361s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 361s] Requires: /usr/bin/pkg-config libarchive.so.13 pkgconfig(libcrypto3) [ 361s] Processing files: libarchive-debuginfo-3.8.1-1.4.armv7l [ 361s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 361s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 361s] [ 361s] warning: Missing build-id in /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/lib/debug/usr/lib/libarchive.so.13.8.1.debug [ 361s] Provides: libarchive-debuginfo = 3.8.1-1.4 libarchive-debuginfo(armv7l-32) = 3.8.1-1.4 [ 361s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 361s] Recommends: libarchive-debugsource(armv7l-32) = 3.8.1-1.4 [ 361s] Processing files: libarchive-tools-debuginfo-3.8.1-1.4.armv7l [ 361s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 361s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 361s] [ 361s] warning: Missing build-id in /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/lib/debug/usr/bin/bsdcat.debug [ 361s] warning: Missing build-id in /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/lib/debug/usr/bin/bsdcpio.debug [ 361s] warning: Missing build-id in /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/lib/debug/usr/bin/bsdtar.debug [ 361s] warning: Missing build-id in /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm/usr/lib/debug/usr/bin/bsdunzip.debug [ 361s] Provides: libarchive-tools-debuginfo = 3.8.1-1.4 libarchive-tools-debuginfo(armv7l-32) = 3.8.1-1.4 [ 361s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 361s] Recommends: libarchive-debugsource(armv7l-32) = 3.8.1-1.4 [ 361s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm [ 362s] Wrote: /home/abuild/rpmbuild/SRPMS/libarchive-3.8.1-1.4.src.rpm [ 362s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libarchive-3.8.1-1.4.armv7l.rpm [ 363s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libarchive-debugsource-3.8.1-1.4.armv7l.rpm [ 363s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libarchive-tools-3.8.1-1.4.armv7l.rpm [ 363s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libarchive-devel-3.8.1-1.4.armv7l.rpm [ 364s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libarchive-debuginfo-3.8.1-1.4.armv7l.rpm [ 364s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libarchive-tools-debuginfo-3.8.1-1.4.armv7l.rpm [ 364s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.elbY8Z [ 364s] + umask 022 [ 364s] + cd /home/abuild/rpmbuild/BUILD [ 364s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm [ 364s] + cd libarchive-3.8.1 [ 364s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libarchive-3.8.1-1.4.arm [ 364s] + exit 0 [ 364s] ... checking for files with abuild user/group [ 364s] ... creating baselibs [ 365s] [ 365s] 9cfce1fd6b39 finished "build libarchive.spec" at Sat Sep 12 19:39:10 UTC 2026. [ 365s]